What to do to the doors of the car do not come with. How to open a frozen car door? What if you freeze the door lock? How to lubricate the door gum in winter

About the severity of Russian winters speak once again. Each driver experienced a negative effect of negative temperature on the car. One of the most common problems is that the doors in the car are called. What to do in such cases and what can be used to avoid in the future such situations, this article will open.

What to do if the car does not open

The reason for such an annoying situation is moisture that falls on the seals. It can stay after, if it was not sufficiently dried. Or arise due to condensate, which is formed with sharp drops of temperatures (heat in the cabin, on the street frost). If you close the car during a strong snowfall, the snow falls on the seals, it melts and turns into water, which in the future freezes and gluits the door. Water can also get into the castle and prevent its opening.

Open the castle

The way that our grandfathers enjoyed is to heat the key with a regular lighter. The heated key is inserted into the castle and attempts to turn it out. Without fanaticism and effort, not to break the key. Such actions are repeated several times.

For modern drivers were invented, which allow a more civilized way to open a frozen castle on the doors of the car. For example, a key chain, which is called the "car lock defrostator". It works this device from the batteries, has a retractable probe. It is inserted into the lock and heats up, thereby defining the opening mechanism.

If not available, then you can pour into the lock hole of alcohol or alcohol-containing liquids, vodka, non-freezing car fluid or means that is created specifically for defrosting the castle in the car. The last option is particularly good, since the substance displaces frozen water from the keyhole, while covering the contact with an oily film with a protective effect.

Do not allow widespread errors that can lead to sad and irreparable consequences:

1. Use hot water.
2. Apply the power in turning the key.
3. Lighter to the door of the car.

Open the door

Open the lock is only half of the problem. After all, often the door itself acts about the body. In such a situation, you can go two different ways. The fastest way is suitable for very busy and wealthy drivers. As you should jump the doors, without worrying about what states will be seals after such actions. If this method is fully suitable, you choose the side in the machine that is used less frequently. The torn seals from the driver's side will bring you a lot of inconvenience, and the draft even can even cause damage to health. It is not necessary to hope for a guarantee - there are no rubber bands. For this service will have to pay yourself.

Leather, economical and not very hurrying drivers should consider another option that will save elastic bands in the doorway safely and preservation. To do this, you will need to operate according to the following algorithm:

1. Make sure the lock functions and is in the open position.
2. Repair the ice layer on the hood of the car, which may prevent the opening of the doors. To do this, you can use a special scraper or plastic subject of a suitable form. It is not necessary to show your strength opportunities to keep the car paintwork.
3. By slightly pressing and tapping in the corners of the door structure, try to destroy the layer of ice, which was formed on the door seal. Similar actions to do with each door of the car and even with the trunk in the hatchbacks and station wagons.
4. If the previous actions did not lead to a positive result, WD-40 or its analogue will come to the rescue. The remedy you choose is applied to sealing gum, which 10 minutes later should soften and fall behind the body.

Doors can not be opened with the help of a girlish lever, to use just boiling water (at the very end of the warmth).

Preventive action

To all the above troubles do not distort you in winter, you need to prepare a car. This will require lubricate WD-40 Castle or any other analogue. Make it easily - the lubricant is applied to the key, which is then inserted into the keyhole and scrolls with smooth movements. It is better to carry out this procedure at the plus temperature. Also, the lubricant is applied to seals. For these purposes, it is good to use silicone-based tools or again WD-40. In extreme, technical vaseline will suit, but its application will have to repeat several times.

These tools should be applied carefully to prevent them from entering seats and clothing. Silicone has a property of displacement of fluid from any surface to which it is applied. The product under consideration forms a water-repellent film. Silicone lubrication can be applied on gum even immediately after washing.

If you caught good tool, just one grease can protect your car for a month or even to the end of the cold.

Since the cause of the freezing of the doors of the car is water, it must be constantly eliminated. After each washing, carefully wipe the seals. Condensate formation can be avoided if you leave the car open for 5 minutes before parking. During this time, the temperature in the cabin and the street will be the same.

So that in the future do not dance around your car and not tear off the most ruthless way of gum, bother about the acquisition special Tools for car care. Lubrication of all adjacent elements is a mandatory step in the process of preparing a car by winter. Just in case, have at hand. Be sure to keep them outside the car. And remember that the faith and responsible driver doors do not face the body.

Than lubricate door locks? This question torments many motorists with the arrival of frosts. The complex of measures also includes lubricant of door locks, trunk, hood, as well as lubrication of seals. For this, special means are used, the purpose of which is to ensure reliable operation of locks in conditions of even significant frosts. In this material we will make an overview of the most popular lubricants among car enthusiasts, as well as give useful advice on this occasion.

Properties of lubricants

First of all, we'll figure it out with what requirements should the means for lubricating door locks. These include:

• preservation of yours operational properties under conditions of low temperatures;
• opposition to corrosion processes;
• low friction coefficient;
• stability to washing not only with water, but also by various compositions based on salts and alkalis;
• long validity.

The tool must be hydrophobic, that is, that that is not dissolved by water. Otherwise, it is easy to repel from the cavity. It should also prevent moisture from entering the volume where the itself is laid.

Lubricants are designed to perform preventive action. However, if your car is already frozen, then exists.

Lubricants for car door locks

Now consider the most popular means for processing castles of their larvae and mechanisms. On the Internet you can find a lot of contradictory reviews about a particular means. We tried to be objective and collected for you information about lubricants that really effective even in conditions of significant frost. It is also worth mentioning that most of the funds below can be successfully used to handle not only locks and their larvae, but also.

Also when processing the lock, fill the funds listed below not only in the larch, but also process the mechanisms directly. This can be done with the dismantling of the castle or without it. It all depends on the design of a particular car. For example, the castles of domestic vases are better to remove completely and lubricate rubbing parts. And in foreign cars, where dismantling is complicated by the design, you can lubricate only the available parts of the castle.

This is one of the most popular means for lubricating the larvae of car door locks. Its temperature operating range is -40 ° C ... + 150 ° C. Lubrication is absolutely harmless to humans, and does not highlight into the atmosphere harmful substances. In addition, it is compatible with metals, plastic, rubber and various chemical compounds encountered in the machine case. The manufacturer declares about 3 months of warranty of use even in difficult operating conditions. The most popular packaging amount is 400 ml (although there are packs of 5 or more kg). The approximate cost of such a tube in Moscow for autumn 2017 is 1300 ... 1400 rubles.

Lubricant characteristics:

• basic oil - polyalphaolefin;
• the thickener is a thickener on the basis of an aluminum complex;
• range of operating temperatures - -40 ° C ... + 150 ° C;
• moment of start at a temperature of -40 ° C - 0.9 N · m.

The specified tube is enough for you for several seasons depending on the intensity of use.

Step Up SP5545

The temperature range in this lubricant is even more wide - -50 ° C ... + 220 ° C. It is implemented in ballot-aerosols weighing 312 g. The remedy is suitable not only for lubricating the castle of the car doors, but also for its other parts. After all, since, the lubricant is based on lithium, therefore, with its help, we can handle plastic and rubber surfaces to protect them from moisture and destruction.

The lubricant includes the original composition of Wetout, creating a water-repellent film on the treated surface. It will help to extend the life of not only the iron parts of the lock but also rubber seals and plastic details of the finish. The price of a tube weighing 312 grams is 160 ... 180 rubles in Moscow with a fortune for autumn 2017.

Hi-Gear HG5501

Lubrication is also created on silicone basis. When applied to the work surface, it forms a thin, but durable polymer material that reliably protects it from moisture. In fact, the lubricant is universal, so it can be used in other techniques in other techniques - with household door locks, rubber and plastic surfaces, drive cables and many others. It is also possible to use the means in everyday life with products from listed materials.

The cylinder capacity is 283 ml. Includes there is a plastic tube, which can be connected to the sprayer, and apply lubricant to hard-to-reach places. The price of the balloon is about 400 ... 450 rubles as of autumn 2017.

Lubrication Wurth HHS-2000

The lubricant Wurth HHS-2000 is extremely popular among motorists in our country. According to the instructions, it is designed to lubricate parts under high pressure and loads. Like the previous remedy for lubricating the door locks of the car, is universal. To its features include:

• High penetrating ability and small thickening time. It can be used to lubricate the locks of the car doors. With the help of the tube it is laid inside the castle, where it almost immediately becomes thick, forming a protective film on the surface of the parts and passing out moisture. The composition of the means provides a high lubricating effect.
• High adhesion. That is, the ability to stick on the surface being processed. When processing, the liquid fraction evaporates, leaving only directly lubricating substances in the work.
• Stability K. high pressure. WURTH HHS-2000 lubricant has a long service life even under high loads and pressures.
• The tool prevents the drainage of metal surfaces, and also reduces the resistance to the screw.

The lubricant WURTH HHS-2000 is sold in small cylinders with a volume of 150 and 500 ml. Since the tool is universal, we recommend that you buy it for use not only in the car, but also in everyday life. The price of 150 ml cylinder is approximately 250 ... 300 rubles as of autumn 2017.

LIQUI MOLY PRO-LINE HAFTSCHMIER SPRAY lubricant is universal. Including it you can lubricate the locks of the car doors. It is an adhesive spray lubricant, packaged in cylinders with a volume of 400 ml. The tool can be used to process hinges, levers, joints, bolts, door loops, preservation and operation. The features of lubricant include:

• wide temperature Range use;
• excellent adhesive properties;
• providing anti-corrosion protection;
• resistance to the effects of both cold and hot water (it is practically not washed away);
• resistance to elevated pressure;
• long service life;
• the possibility of spraying at any position of the cylinder.

The only disadvantage of this fund is his high price - 600 ... 700 rubles per cylinder with a volume of 400 ml. However, if you have the opportunity, we recommend that you buy this tool, because it can be used in various nodes of the car, as well as in everyday life.

Despite the entire track record of the means of suitable for lubricating the locks of the car car owners often do not rush to overpay. As a rule, it is looking for what you can lubricate the locks of the doors from freezing or from heavy opening directly at hand, so we will provide a list folk remedies used for lubrication.

Additional means than you can lubricate the castle

The above lubricants refer to modern developments and the results of the activities of the chemical industry. However, before their appearance, drivers used by decades using various girlfriends for lubricating locks and door loops. For example, kerosene, acetic acid and even iodine. Imagine a couple more for you, so to speak "folk" funds than you can lubricate the castles of the car door for the winter. After all, it is in the cold course of the locks that create additional difficulties in order to get inside or close the door. And the question is what lubricant is better to lubricity becomes more relevant.

WD-40.

Castle processing VAZ 2108-2109

Yes, the old good lubricant WD-40 can also be used for injection into the larva of the castle, but in no case on all its running mechanisms. The fact is that the main component of this means is the White spirit (50% volume), in which the freezing temperature is -60 ° C. Therefore, sheers lubrication residues. The liquid is sold in the form of an aerosol in a canopy with a tube, with which you can easily splash the tool into hard-to-reach places.

The WD-40 lubricant can be used to dehydrate the surface to be applied to the removal of corrosion from it and prevent it from re-appearing, the formation of a protective film on it. In general, the tool is applied very widely. Moreover, not only for processing the parts of the car, but also in everyday life.

A significant disadvantage of the WD-40 castle processing is its short-term action. With severe frosts, the larva must be processed by this means for approximately two days.

When processing the "woven" of the door lock (both automotive and economic), it is advisable to apply on the same surfaces. You can use one of the listed listed above, or use any other.

Various defrosts

In this case, we are talking about special means, on the packaging of which it is written "Castle defrost" or something like that. Usually their composition includes oil or white spirit, less often silicone. There are such funds inexpensively, but act well, in any case with relatively small frosts. The disadvantage of these funds is the short-term action, since in composition they are similar to WD-40.

When buying such lubricants, carefully read the instructions. Often manufacturers attribute to their funds truly miraculous properties. However, it is necessary to understand that if the remedy is inexpensive (and most often it is), then there should be no wonders from him. Just regularly process the larvae and the mechanism of the castle "castle defrosts" in winter time And there will be no difficulties with his discovery. But only in the spring period, after its use, it is recommended to treat the lock mechanism by another composition. In particular, that could be protected from corrosion and friction.

Motor oil

If for some reason you have no lubricant (from listed or other) at hand, then you can use the usual motor Oil To lubricate the castle of the car doors and freezing and for stable triggering. Its viscosity, brand and consistency in this case are not important (Well, except that it should not be frankly black from soot and debris). With the help of a syringe or other similar devices, you must pour a few drops of oil in the larch and / or process the lock mechanism. This will create a water-repellent film on its internal parts and prevents the emergence of the alternation.

However, the oil has the above disadvantage - its action briefly, and will also attract dust. Therefore, they can only be used in the event that there are no more professional funds at your disposal. And at the first opportunity, buy any of the lubricants listed above.

Instead of imprisonment

Finally, we will remind you that you need to handle loops and lock locks of your car not only in advance (before the onset of cold), but regularly. This will ensure their reliable work even in the most heavy conditions. To date, for reasonable money, you can buy professional tools for processing locks with a long period of action. The main thing is to buy lubricants in proven stores so as not to run into the fake.

To B to winter The driver did not appear problems with the opening of the door, you need to prepare for frosts in advance and process door seals special composition. The optimal option is the lubricant for car door sealswhich prevents the freezing of the rubber seal.

In general, silicone-based lubricant is universal tool that not only protects sealing gums and other surfacesBut also used to solve many other tasks. Its use repeatedly increases the lifetime of many decorative and sealing elements in any car.

Lubricant used for rubber seals provides protection of elements from cracking, aging, winter examples. In addition, this agent improves tightness, heat and sound insulation.

But it is the versatility of the available properties of silicone-based lubricants with almost all rubber and plastic parts of the car. Silicone has ideal chemical properties, including water-repellent characteristics and the ability to protect parts from mechanical damage. The working temperature regime of such funds is in the range from -50 ° C to + 250ºС. But regardless of the ambient temperature, the viscosity of silicone lubricants does not change.

This allows you to use silicone for car doors and other items at any time of the year: in winter - to prevent the sealer to the body, and in the summer to prevent the drying and destruction of parts from rubber.

Benefits of sealing lubricants

We noted above that silicone for car doors is steady as low and to high temperatures . And this is his main advantage! Due to the special carbon composition, which was developed for the preservation of some elements, silicone-based lubricants have an indispensable properties - resistance to low temperatures.

Sure, if it is impossible to use special means for lubricating rubber elements can be used Technical vaseline, which possesses similar properties, but differs from silicone smaller effect. In addition, glycerin may be suitable, which softens the rubber, prevents it in cracking and freezing.

But the greatest efficiency is the lubricants on a silicone basis, which have a number of significant advantages:

• versatility of funds and simplicity of their use;
• increased environmental friendliness;
• low cost;
• antistatics properties, which does not allow the accumulation of dust on rubber elements;
• increased moisture-repellent properties.

If we take into account how much the condensate is crystallized at negative temperatures, which leads to the face of sealing gum, the increased ability to repulse moisture can be considered the most important property in winter.

Varieties of lubricants

Asking the question than lubricating gum, it is necessary to have an idea of what types of lubricants today are available to motorists And what are the advantages and disadvantages of each species. This should be told a little more.

Fast tools

These are thick plastic mixtures applied using napkins. Fast tools enjoy when processing automotive seals from rubber, equipment for underwater immersion and home appliances. The disadvantages of such lubricants include the complexity of lubrication of hard-to-reach places.

Gee-shaped means

This type of lubricant has a thick either liquid consistency and applied to the parts with a soft napkin. The benefits of thick funds can be attributed to what details not subjected to processing remain clean. While their disadvantage is the impossibility of applying in hard-to-reach places. Liquid gelling agents are used to process complex devices, as they, in contrast, with ease penetrate to hard-to-reach places. The disadvantage of liquid gel funds is considered to be spread, but sometimes it becomes a clear advantage.

Aerosol funds

These funds are easy to use. They are used to apply on the surface of a large area and small parts in hard-to-reach places. Disadvantage of aerosols is excessive splashingleading to contamination of neighboring elements. To reduce splashing, you need to use special long nozzles. In addition, with insufficiently thorough rubbing, aerosol means form fat stains.

Air conditioning "Very Lube"

This is a spray tool that is intended for processing rubber and plastic surfaces. It promotes color recovery, anti-aging. Spray has excellent detergent properties, deeply penetrates into small cracks and scratches, and filling them cleanse them from dust and mud clusters. The use of this tool contributes to the restoration of the original color and gloss, the improvement of the aesthetic type of rubber surfaces, protection against fading and cracking, preventing the faceting of rubber seals on the doors, hoods, trunk. The only lack of applying the spray is the short-life of the protective coating. It participates the need for their use.

Penetrating grease "Nanoprotech"

Today, lubricants of this type have become very popular. They are have perfect moisture protection, anti-corrosion, lubricating and penetrating properties. Prevent freezing of moving parts at temperatures up to -80ºС. Lubrication is recommended for use on rubber seals. She guarantees reliable protection From moisture, contributes to improving the state of rubber elements and their stable operation. The tool has a lot of advantages:

• contributes to the formation of a waterproof and water-repellent protective layer, which is pushed out moisture;
• filling microscopic cracks and recesses;
• lubrication long retains elasticity;
• does not destroy the materials;
• not dissolved with water and does not form emulsions;
• as part of the fund, there is no rubber, silicone, teflon, etc.;
• the means is not exposed to external factors;
• it is safe for humans and nature;
• resistant to mechanical impacts;
• operation temperature range from -80ºС to + 160ºС;
• period of preserving protective properties up to three years.

Application

Car lubricants have wide range of applications.

Door seals

Lubricants are actively used to prevent the occurrence of cracks and wear of the sealing elements of doors, hood, trunk. Experts recommend regularly process these elements with silicone-based lubricants. This contributes to maximum sealing and lack of foreign sounds in the cabin. In addition, such lubricants are used to treat all sorts of moving elements and surfaces.

With the help of silicone spray, the door loops and the grooves of the side glasses are processed. For light sliding hatch and reduce loads on its surface, such a processing prolongs the operation time.

In addition, all surfaces treated with similar means are protected against wear and damage, corrosion of external factors.

Castle mechanisms

Regardless of the brand and model of the car, all TCs have a decent number of locking mechanisms. All of them are exposed to external factors and mechanical wear. For example, condensate, accumulating in winter in the selection of the element freezes, which makes it difficult or prevents the door opening, hood, trunk and other parts equipped with a lock. To prevent it you need to lubricate regularly Mentioned mechanisms.

Silicone-based lubrication prevents icing. Excellent penetrating characteristics contribute to easy penetration to any hard-to-reach places. The Teflon, which is part of the part, creates an invisible protective layer on the surfaces. This prevents corrosion and different oxidation.

Silicone has high resistance to salted solutions, alkalis and acidic acids.

Elements of plastic

Plastic parts in the auto cabin ( dashboard, door cards, etc.) often make extraneous noises to prevent this it is recommended to apply These chemicals.

Silicone-based lubricant is perfectly coping with this task. The lines of contact and joints, processed by silicone lubrication, cease to make any noises. Also, with the help of these compositions, any plastic elements can be processed, it gives it shine and thereby changes the view of the cabin.

Details of the suspension

The pendant parts made of rubber are exposed to harmful foreign microparticles. Moisture, dust or sand, falling on the details act on them like abrasivesWhat leads to their rapid wear. In winter, it is also advisable to process it in winter to reduce the effect of aggressive compositions and reagents on the suspension details. Today, all sorts of silicone-based lubricants are available, focused on protecting metal parts of the body and the chassis from negative impacts that cannot be avoided, exploiting the car.

Control details

Silicone lubricants extended the service life of the pedal seals, levers. Moreover, aerosols are excellent for applying for cables. For this, the remedy is fond of a protective casing of the cable, by means of a special thin nozzle, previously disassembled it.

Such processing contributes to a good slip and protects against moisture / dust.

What to choose

The basis of silicone lubricants for rubber seals is mixing poly-methyl-silichesan solution and propylene with adding of different types polymers. The difference between the means is almost impossible to see. All of them give excellent results Pumping moisture and lubrication.

The main differences of these funds are provided or the absence of odor, convenience in the process of processing and applying. The operating temperature modes also differ slightly (ranges -30 ° C- + 200 ° C and -50 ° C- + 250 ° C). Solvents that are contained in such means are easily weathered, due to this they will quickly dry.

To determine the variety of lubrication is necessary carefully familiarize yourself with the instructions for use and those. Parameters. Glass seals are preferably treated with a pasty or gel-shaped agent for hood / trunk the best option They will become gels and aerosols.

The quality of lubricants is determined by the expiration date, the rating of the manufacturer and the price - the low cost may be of a low-quality composition.

Ice is the main cause of huge problems for the car. For example, if your windshield I got out, then you can not go by car, as it is very dangerous. But most often the drivers give the ice problems, the braving doors, handles and car locks, which creates, up to the inability to get inside the car. Fortunately, many problems associated with freezing and icing car can be avoided. Here. Including you will learn what to do if the doors of the car froze, and you cannot get into the salon.

Examine and clean the rubber car door seals

The doors of the car in winter, as a rule, are frozen due to the freezing of the moisture, rain and melting snow or ice inside the cabin and doors. Basically, water falls through old or worn rubber seals (cracks on rubber seals, various injuries, scuffs, etc.) located on the body in the locations of the doors, which are installed just in order to avoid moisture from entering the machine streets.

If the rubber door seals are simply dirty, then you need to make them high-quality cleaning. The fact is that dirt and various crumbs can do so that the doors will lose a sufficient seal, which will contribute to getting into the salon and moisture.

In order to clean the gum doors you need a clean rag and warm water. Your task to clear not only the seals themselves, but all the frames on the body, which are adjacent to the doors, as well as the rubber seals themselves installed on these frames. After a wet cleaning of seals and the frames of doorways, it is necessary to wipe them with a dry cloth or a napkin to remove the remaining moisture.

During cleaning rubber seals, you must clear not only rubber gaskets located on the body of doorways, but, as well as clear the rubber seals on the door of the machine.

In winter, cleaning rubber car door seals should be made in a warm place (garage, in underground parking, where in winter, plus temperature or on a car wash in a closed box). That is, your seals where heat is warm. In this case, water with the help of which you will clean seals from dirt will not freeze.

Protect car doors from freezing with lubricant

Of course, the most to prevent freezing the doors of the car, it is to put it in warm garage Or warm underground parking. But, unfortunately, not everyone has the opportunity to put a car in a warm place in winter. Fortunately there are several ways that will allow you to protect the car from icing doors.

So the most popular tool that prevents the freezing of the doors of the car is silicone lubricant (spray).

Having bought in any car shop silicone lubricantYou must spray it onto rubber car door seals and then evenly distribute it using a microfiber cloth over the entire surface of the door seals and rubber bands located on the body.

Remember that Silicone pushes water and will not allow moisture to get into the salon between seals.

Silicone grease-spray is quite cheap. High-quality lubricant is an average of 110 rubles, which you can purchase in automata, some hypermarkets or online stores.

If you can not find silicone grease in stores, then other chemicals can be sold in many auto shops, also intended for processing doors and door locks.

How to open frozen car doors

When it comes to opening icy and frozen doors, it is better to foresee an ice rain in advance, drop in positive temperatures in negative values, as well as possible loss of other precipitation that can turn your car into one piece of ice in a short time. After all, with such weather conditions (especially with the ice rain), even new rubber door seals will not save you from freezing doors. In any case, the door can freeze outside the car, and you will come across a big problem to open it.

For example, that after icing the car you are not encountered with the problem of icing doors, you can, before leaving the car for the night on the street parking, put a thin rag or towel to the top door frame. Then just close the door, and the rag will be between the upper frame and the car body above the door. Thus, you are independent of weather conditions that contribute to the formation of ice, you can easily open the door.

But do not forget that regardless of whether you will use a rag on the door from the evening, in the event of a strong freezing or icing of the car doors, before you open the frozen door should clean it from ice from the outside.

To do this, use a special handmade scraper, which can be bought in any automata or product hypermarket.

Before opening the door covered with ice, you must remove the ice from those places where the door is adjacent to the car body (gaps between the doors and parts of the body). If the ice thickness is too big and you cannot clear the door of fitting the doors to the body, then you can help camphor alcohol), which you must dilute with water.

To do this, take 2/3 of alcohol and 1/3 of water.

You can also buy a special fluid that will help you remove ice from the door of the machine. As a rule, similar means are also widely represented in automotive stores.

If you can't open a frossable door in the car, even with the help of a manual scraper, special chemicals etc., then it's time to heat the door with a hair dryer.

Almost every iron horse owner faces the problem of car doors. When in the morning, putting forward to work, you go to the parking lot and you understand, or you are late or torn off all the rubber seals on the doors, because overnight they looked like. Now we will deal with how quickly and effectively solve such a problem.

Cleanliness of doorways

Of course, the first and one of the most important points is the maintenance of the car clean and prevent the contamination of doorways. After all, first of all, it freezes and gluits the doors of dirt and water. It is necessary to constantly monitor that the surfaces, snow, water, dust do not fall on the seals and on the surfaces relating to them. Especially harmful are various sticky fluids, sweet sodes that melted chocolate or the same ice cream.

Location of the car in the parking lot

Second important moment This is how the car is located at night. So with northern or the windy side of the door is much stronger, and the riser seals robbed and dug in such doors faster than those opposite. So try to put the car "main" door in the warm direction.

Special needs - auto chemicals will help you

Nowadays, the auto chemical industry is very developed. And as a result, already invented special fluidsthat prevent the door of the door. There are both special defrosts and various kinds of lubricants. Most. optimal option is silicone aerosol . This is a multifunctional tool that allows you to increase the service life of rubber seals and effectively protects them from samples to contacting surfaces. It is such an aerosol that is a very effective assistant in the fight against the door. It is worth such a means is not expensive, it is enough for the processing of large areas and the validity period is several weeks after the first processing.

As an aerosol is applied: everything is very simple, it is necessary to clean the surfaces of rubber seals and doors, where they come into contact with seals from dust (and dirt if there is) and uniformly spray the tool with a smooth layer on the surfaces. After that, in a few minutes you can safely wipe the surface with a dry napkin to remove extra particles. And on this all the procedure is completed. After processing with silicone aerosol, your doors will no longer try more.

But there is another plus, you can lubricate not only door openings, but also door locks, after which they will also stop freeze and will work much softer. It will immediately feel and affect comfort for the better.

So, summarize.
Keep the car clean, if possible, placing the main doors in the parking lot with warm And in front of the cold (or right during) we process the faceting surfaces with silicone aerosol. Just just one processing.

Adhering to these tips. You never experience discomfort associated with the following doors. Good trips!