Camouflage on cars with your own hands: simple technology and excellent result. Collect the car in camouflage yourself VAZ 2114 in the film camouflage

the main / Driving

Today, increasingly popular in the field automobile tuning It becomes such a direction like painting cars in camouflage. In this article, on the example of the UAZ, we will show how you can "disguise" the car do it yourself.

Necessary materials and tools

aerosol paint in the canopy (4 cylinder cylinder black, brown and green colors), as well as vinyl film (depending on how the camouflage drawing will be applied to the car);
lacquer with matte effect;
polyrol with a sponge;
solvent No. 469 (0.5 liters);
gasoline (200 ml);
special Paint Spatula (width 7 cm);
pure flannel rag;
halogen lamp with a capacity of 1 thousand watts;
as many old newspapers as possible;
paper greater tape (wide and narrow - 5 rolls).

Prepare cars to paint with your own hands

The best time to paint the car is summer, because warm weather and lack of humidity are the most optimal conditions for painting works. It is recommended to carry out in the garage or pure spacious boxing. The main thing is to completely eliminate such a negative factor as dust, and in the air and on the surface, otherwise the camouflage pattern may not be so attractive as I would like.

We rush the non-painted surfaces with a newspaper. Click on the photo to enlarge.

The preparation of the car is beginning with the fact that we put all the unknown areas with old newspapers. Confirm them on a wide greater scotch. Completely cover optics, glasses, door frames and sealing gum. If, upon completion of all the work, it turns out that the paint still got on one of these parts, carefully processed the fan with a solvent.

Then, we carry out degreasing the surface of the machine with a lobby cloth moistened in gasoline. The solvent is not recommended for these purposes, as it acts too aggressively and may not just clean the surface, but also damage the factory paintwork.

When you try to paint such a plot of paint from the canopy, the coating can get a "fur coat". If it still happened, we in the hands of a halogen lamp, heating the surface, and then completely remove the paint with a spatula. If this is not done, when re-applying the "fur coat" paint may appear again.

"We disguise" the car with the help of paints

You can answer differently to the question of how in the "camouflage" color. Camouflage on the body of the car is drawn manually or using a stencil. The first method, of course, is preferable, because then the camouflage will look more natural. On the other hand, the use of the stencil will help save time. Let us dwell on the creation of the picture with your own hands.

The first color of the paint with which we have to work are black. The contours of the stains will be created using a narrow painting tape 2 cm wide. It goes well and allows you to create more smooth lines on the bodies. In addition, paper malarious tape is easily removed from the housing, without damaging the paint coating. Special attention should be paid to ensure that the tape is tightly imparted to the surface, without forming folds and chances in which paint can accumulate, otherwise the circuit may not be very neat.

The car will look more original if the stains do large, breathtaking different body elements. A protective "screen" of newspapers is formed along the contour of the spots. It will not allow us to paint black. After that, we apply for all spots to black paint from the canister. You can only start the stains of the stains of another color when the black spots are completely dried down. Dealer you have to paint some areas on the car body in brown, and then in green. Spots draw in the same way as before.

It is important that they are located to be a mustache: only so you can make camouflage solid. Each color paint is applied in two layers to ensure deep opaque color. This is especially true of green, as it is the brightest. If painting spots are moving from the right side clockwise, not forgetting about the roof and body racks.

View of the car after painting. Click on the photo to enlarge.

We propose to apply lacquer with a matte effect. Today, the "Soft Touch" type matte varnishes are very popular, which give the cover velvety texture. The technique of working with such compositions is no different from ordinary varnodes:

Immediately before applying, a solvent and the strengthener in the proportions specified on the package are added to the varnish. Often, these parameters are changed from the layer to the layer: for the lower - more liquid and flowing composition, for the finishing - more dense and concentrated.

However, if you do not have too much experience in this area, it is better to clearly follow the instructions of the manufacturer.

Varnish are applied in 2 - 3 layers and necessarily maintain some time for drying each. If, when touching the coating, the fingers are still adhered, but no longer lubricate varnish, you can begin to apply the next layer.

Create camouflage by car with a vinyl film

When painting a car in camouflage it is very convenient to use vinyl film. Of course, the total cost of painting will not change from this, but the process will go much faster. The general scheme of working with vinyl film is as follows:

the film is cut into large slices in advance, in which the holes are made - this will be our spots.
the prepared vinyl cloth passes on the car, and those parts of the body that remained open, painted with a balloon in black.
similar procedure repeat with brown and green. Film-stencil for brown spots glue so that it partially overlapped black spots, and in the case of green - so that the stains are mounted on black and brown. Do not forget to spend a thorough drying of the pigment of each color!
when the entire body of the car will be painted, all the layers of the film are removed. If you are not satisfied with clear contours of spots, you can make a refinement with an airbrush.

Car owners note

Painting the car in the "camouflage" color is original, it will definitely be noticeably from afar. However, it is important here not to overdo it: the camouflage should take no more than 50% of the total area of \u200b\u200bthe car body, otherwise you risk being fined traffic police.

Every car owner wishes his car stand out among others. vehicleand the main way to stand out has always been and remains external tuning car body. Recently, increasing popularity in this question began to conquer tuning under camouflage, although among fans of hunting and fishing it was always popular. But no matter how much the popularity of camouflage on the car, today is only interested in the question of how to make camouflage by car without the help of specialists. About this and tell below.

Types of camouflage and ways to apply to the car

To "wear" your car into camouflage, you can simply contact the service center and take your transfigured car in a few days. But this option is not entirely profitable in financial PlanTherefore, it is worth at least trying to make camouflage on a car with your own hands. And before proceeding with the direct painting, it will be useful to familiarize yourself with the types of camouflage, among which you can choose and the option for yourself.

Among all the existing types of camouflage today, four main:

It assumes the use of white background, according to which stains of gray and black colors with pointed corners are applied. This species They are still referred to as urban camouflage.

Basically, only sandy shades are used - yellow, brown and gray for contrast. For this reason, such a type of camouflage is also called sandy.

Make such camouflage at home the most difficult, but only if you do not resort to the use of vinyl film, on which such a drawing is already applied. Color combinations in this case can be used a variety of different types of species. The feature of the digital camouflage is the form of color spots, which look like a highly enlarged digital pattern consisting of a large number of squares.

Forest or military camouflage - It is simply imitation of a protective military color, which can be modified differently depending on your wishes.

What instruments will be needed to create camouflage on the car with your own hands

Painting cars in camouflage can not be carried out without prior preparation required tools and materials whose set will vary depending on how exactly you decide to perform work.

What tools can camouflage without stencil?

If you decide on a similar way to apply camouflage - it means that you are not first to work with paint and with its application on a car, because it is actually very difficult to work without a stencil. To do this will have to use:

A huge number of old newspapers or other paper (for example, you can break your old student abstracts).

Large reserve of painting scotch of different thickness (5 rolls of narrow and as wide).

Clean and dry rags from flannel.

About 200 g gasoline.

500 g solvent for paint.

Special varnish for applying a car (he can have a glossy or matte effect, so you already choose here).

Halogen lamp per 1 kW.

Construction spatula (the most convenient to work with a tool whose width is 70 mm).

Automal. It is often for sale in the canopy cannon, in this form and you need to take it. In order to cover it all the body of the car, it will take about 4 plates of each color.

Tools for painting cars in camouflage using stencil

For such a way of applying camouflage, you will first need to decide in advance with the type of drawing and the size of the color spots on camouflage. After that, prepare vinyl films or a very dense cardboard, from which you can cut stencil. But besides him, you will use all the same tools in the work as when creating camouflage without a stencil.

Casting Machines Vinyl Film Camouflage

This is the easiest job of applying camouflage, since it implies the presence of a vinyl film of the necessary coloring and its gluing to the body of the car. To do this, except for the film, you also need to prepare:

A sharp knife for trimming the edges of the film.

Special spray that needs to be treated with film during sticking.

Rubber and felt rockets, which are useful for moving the film and remove air from under it.

Construction hairdryer.

Sealant for processing edges of the film.

Features of the preparation of cars to painting

To make painting it is necessary to prepare a garage or any other space convenient for you under a canopy, where reliable ventilation would also be (in working with vinyl, this question will not stand so sharply). The garage must be carefully removed and, desirable, walk the wet rag to remove all the dust. After that, it is also necessary to take care of the car:

1 . With the help of water, remove completely all pollution from the body surface.

2. Give the car time to dry and dismantle all the items that can be spattered with paint (if there is no desire to dismantle, they can be sealed with a scotch or film).

3. Decrease the surface of the body, rubbed it with a rag moistened in gasoline. Please note that after this procedure on the surface of the body there should be no villi.

If during the preparation of the body you noticed the bloating of the old paint coating, before applying a new paint layer it is necessary to remove it with a spatula, pre-warming up the lamp.

How does the process of applying paint on the car when creating camouflage?

So, how to paint the car in camouflage with your own hands? The entire process of performing work will differ significantly, depending on the selected method of creating camouflage. Each of these methods we will analyze separately.

Painting cars in camouflage without stencil

This way of painting quite strongly stretches in time and at the same time he strongly limits us in choosing a picture, because without a stencil it is very difficult to apply complex forms. In general, the procedure for creating camouflage on the car is carried out as follows:

1. Using the narrowest greater tape, we create on the surface of the body the form of the future picture. Try not to bend your tape, otherwise the paint is leaked to it and spoil the integrity of the drawing.

2. Increasing the stains created by you, save the newspapers so that the paint does not fly further outlined borders. Newspapers are better consolidated with a wide scotch.

3. The first to apply the most dark color of the color spectrum you have chosen. After drying, cover it by another layer so that the color was more saturated, and the paint layer is more reliable.

4. When the stains of the same color are completely dry, tape and newspapers must be deleted and form new spots. Note that the second color should be a little on the first.

5. We apply the second color also in two layers. It is not worth a hurry - be sure to wait for the complete drying of all the layers. The latter applies the most light layer of paint.

6. In complete, we remove all the remains of the painting tape and newspapers, which were glued to the body, and inspect their work. If during the application of paint it got "not there", it should be removed using a conventional solvent.

7. The whole body is covered with a special car varnish to make the paint uniform. For this, do not forget to add a special fixer and solvent to Varnish using the proportions specified in the instructions. Varnish can also be applied in several layers.

How to make camouflage on a car with a stencil?

The principle of applying paint in this case remains the same as without a stencil. The only difference is that it is not forgotten with scotch and newspapers - you just glue the stencil and fill it with paint hole.

The only disadvantage of such a way to create camouflage is that all stains on the car are given the same in size. If you want "diversity", you will have to still spend a lot of time on cutting stencils. But if you wish to get an excellent result and really unique body coloring - a similar problem will not be an obstacle for you.

How to make camouflage vinyl on the car?

Casting machine film camouflage is probably the easiest way not only to transform appearance His car, but also cover its body protective layer of film. It is applied as follows:

1. First, try on your film on the car body and make it with the help of a painting scotch mark, where you need to cut. But before starting a cutting, note that on uneven and curved places, the film will need a little more. The remains are better to cut after the stickers.

2. Using a special spray, we processes the adhesive surface of the film and apply it to the surface of the automotive body. At this stage, the location of the vinyl film can still be adjusted and aligned.

3. Take the rubber rocket and crumple the film. Try to do so that under it there is not a single air bubble.

4. In order for the film even better to be blocked and glued to the body, walk through its surface with a construction hairdryer.

Important! Do not overdo it with a construction hairdryer, as you risk damageing the integrity of the film too high temperatures.

5. Special attention It is necessary to pay flex places. Try to make the film perfectly blocked, which can be done only with the help of its additional heating.

6. Walk along the surface of the film by the felt rocket to fully dissolve it. If necessary, again warm the hair dryer.

7. Cut the protruding edges of the film with a knife and treat all the edges with a sealant so that the film does not extell over time.

Please note that after applying the film on the body, the car should be left in the garage at least 12 hours. Only after that the process of salary can be considered complete, but even taking into account this wash the car is not recommended for another week.

Advantages of each type of camouflage

If you cannot finally decide on what kind of camouflage to apply to your car, we give advantages Each of each described above:

Perfect not only for car masking in winterWhen, mixed with snow, dirt makes the landscape of white-gray-black. In the summer, in nature, such a car in principle will not give any disguise, but in the city will become an excellent urban attribute. But at the same time, the dirt on the surface of such a car is practically not noticeable, because, falling on the body, it will become part of tuning.

It is customary to consider the most modern one who prefers preference to the young generation. He lost his disguise and is used exclusively as decorative.

In such colors, they are mainly painted by those who do not know what the desert is. The desert camouflage is more suitable for the autumn period, although in summer and spring will also give excellent disguise.

Well done forest camouflage It differs not only by the fact that it provides a good disguise in the forest, but also makes the car in a military solid. In fact, this is the brightest option of camouflage.

It is also worth mentioning the vinyl film that can combine all the listed types of camouflage on the car. But, except for an attractive appearance, you get it with its use:

Additional protection of the body from unexpected damage, and in some cases even from dents.

Under the vinyl film, the native paint coating of the car will be reliably maintained. If you wish, in a couple of years you can remove the vinyl and ride the car again without camouflage.

Such a car coating is rather durable, especially if you consider all the rules for use.

The ability to transform the appearance of the car without circulation for help from specialists.

In general, I would like to note that whatever option of the car's color you choose, if there is a necessary amount of time and a sufficient desire to paint any vehicle can be performed at home. Especially since the cash costs will be minimal in this case.

To date, such a way of tuning cars, like painting body in camouflage begins to use in great demand. Below in this article we will tell you how to make camouflage on your own hands.

Materials and tools

To implement the paint process to create camouflage with your own hands, you should get and prepare the following set of tools and materials:

Preparation of auto

The best time for painting the body of the car is considered summer, as the warm weather and the lack of humidity are the optimal conditions for various painting works.

Casting machine to camouflage yourself You can produce in the garage, but it is better to do it in perfectly clean and spacious boxing. It is important that there are no adverse factors in the room, especially dust.

Preparatory work begins with a thorough sizing of all unpainted areas, and then you can proceed to paint work. You need to completely cover the following details:

headlights;
frames of doors;
glass.

If the paint falls into these sections, carefully remove it with the help of a solvent. After that, degrease the body surface with a loud fabric, pre-dipped in gasoline.

Camouflage with film

When performing this process, the use of vinyl film is convenient. Of course, the total price of this method will not change very much, but the process will go faster. This is done as follows:

Preliminary cutting film on large fragments. They need to make holes that will be in future stains.
Preliminary preparation of vinyl canvas. It needs to be unique technology Stick on the car and on those sites that remain uncovered.
This procedure is repeated with brown and green. Film stencil, which is designed to create brown spots, is glued in such a way that it overlapped all previously created black spots. As for the green color, the spots are applied on black and brown.
After full color of the case, all the layers of the film are removed without exception. If you do not like clear contours, modify the coating with an airbrush.
The final stage of the work turns out to apply a layer of varnish.

Cover the body lacquer

Specialists advise covering the body with a special varnish that creates a matte effect. This composition gives a velvety surface structure. It should be noted that the technology of lacquer imposition does not differ from traditional varnishing.

The lacquer before applying is diluted with a solvent and the strengthener is added to it. The amount must be exactly the one that is indicated in the instructions. Often these parameters are changed from the layer to the layer. For example, a more liquid consistency, characterized by high fluidity, is used for the bottom. For the last layer, a more concentrated composition is used - more dense.

Varnish on the car body is applied in 2-3 layers, and before applying each of them, you need to withstand a pause so that the makeup time to dry. You can check with your hands: When the fingers stop sticking, apply the following layer.

The car will look even more original if you make a large spot stains. They must capture different body elements. On the contour of the spots, a special protective screen is created, which can be made from newspapers. With it, you can avoid staining of unnecessary areas in black.

To draw painting spots on the body, you should begin in 2-3 hours, that is, after complete drying of the previously applied spots. To make a car camouflage with the most solid as possible, the stains need to be drawn to the brass. Applying two layers provides opaque and rich color. This concerns green color shades - it is the brightest. When drawing, the stains should be moved clockwise.

Let's summarize

Painting the body of the car to the camouflage camouflage with their own hands is high in demand, since this version of tuning highlights machines from the total mass of vehicles on the roads. Here the main thing is not to overdo it, since the camouflage should not take more than half of the total area of \u200b\u200bthe body.

Recently, camouflage painting of the car becomes popular. Perhaps even the fashion for it will be in the 2011 season, will change the fashion on.
Today, the selection of camouflage color options (painting) car.

Consider what types of camouflage are used. Let's see examples of successful and unsuccessful paintings, a couple of bonuses and my recommendation on the camouflage coloring of the car. Beware, a lot of pictures, letters and utility

Camouflage problem by car

The main problem of camouflage on the car is the scale and intensity of the pattern. This problem comes from the opposite task. In life, at military or hunters, the camouflage is needed to disguise the car. For tuning, camouflage is needed purely to show off, what to hide something?
That's it used to be an understanding that the intensity and scale must be chosen, almost experimentally.

Example. See two subjects in camouflage

Different scale on face, not only on face. Therefore, there is no ready-made solution for a scale under the car. We will have to make layouts on the computer and watch what is better that worse.
Actually this material and will help - you can look at the ready-made solutions and evaluate.

How to apply camouflage

Not sure that ordinary airbrush will be able to draw camouflage. New-fashioned vinyl to help. Perhaps the best solution is a film with a digital pattern, which and tighten the car. They struck the picture on the desired film, saked the car and cheers.
Faweser that now only in a very lazy city there is no office, who Kleit Vinyl on the car. Yes, and it is not difficult to do this and difficult.

Forest camouflage by car

Classic, what is called. Forest military camouflage options can be different from NATO Woodland before the colors of the Soviet Army.
See how it is not bad Porsche, it is also matte, moreover.

A little different version. Matte tint again works in a plus!

But an example of an unsuccessful coloring. What I talked about the work of the airbrush. A man of art and a military man in one head gets around only if the ensign to make the blood transfusion of the artist and then the military will win.

Smartik, too, without much understanding, washed, it turned out generally not bad, but gloss spoils the view.

This is just for comparison of a matte forest camouflage. The drawing will be easier, but the matte pulls again.

It seems to me that the forest camouflage is suitable for a very limited number of cars. My advice - if on the car is a beautiful body kit - do not use the Forest Coloring of Camouflage. And on the contrary, it is a good solution for the stock appearance.

Digital camouflage

Famous Digital, the dream of technological militarists.
On the car looks really cool. And in different shades, for example, deserted, like this Lamborgini

Also note how digital camouflage is combined well with other colors and drawings.

Here, for example, the coloring of the drift car.

And the dual body color and inscriptions and carbon perfectly fit into this digital camouflage.

It is so good that this idea is in solid-launched form myself scomunified the Che DRIFT team, not in vain, because Revolutionaries-Chegevara, the general means nich.
They got beautifully beautiful

Digital camouflage is a very good solution for a non-standard body and a combination of colors. Recommend. Just do not take this brought a combination. Use other colors.

Desert camouflage

Classic deserted. Fetish of Arabs and the Veterans of Afghans.

And the scale and color of the desert camouflage on this Porsche sedan are very well chosen. It really looks great, despite the fact that the original car is terrible outwardly - the camouflage hid all horrors.

And moreover easy option, also neat and tastefully. Audi A3.

Please note the creators of this image of the car took a bold shade + mat and it turned out great. Despite the camouflage body kit and body rods are visible.

Well, this is a harsh classic of the genre. Lamborgini Militari :)

I give these pictures purely in order to show how you can successfully emphasize the britality and chopped body forms.

Winter camouflage

It can be a good solution for white and just a light body.
See how great made the camouflage coloring of this Ferrari

And here is a little different combination, on the evolution

The scale of the other, but also it turned out well - it was possible to disguise the disproportionately elongated mid-rear part of the car. Even the fat "eighth" bumper looks quite worn in such camouflage

Still Lambo. Another scale. Again, the crushed forms were emphasized by successful large stains of camouflage.

But again, the examples of the "designer" camouflage, which frankly did not work. Fit and incomprehensible primitive drawing. And this, by the way, the official drawing from the Volvo designers!

Subara also unsuccessfully. Too much intensity and too light.

Hunting camouflage

Wonderful direction in camouflage - civil, hunting. Nothing in common with the style of Militari in the idea of \u200b\u200bHis. It looks fresh and nice. That's so funny made a prius. Such as all such an eco-friendly, electric car and tralary

But at the present hunting camouflage will look at the jeep.
Even to me, who considers the disease, quite like this kind of jeeps.

Moreover, the standard and modified jeep looks really good. Because everything in its place is a jeep place in the forest, the color of the hunting hunting.

and now, before the most interesting, some bonus pictures.

Here are such brutal additions can be to camouflage coloring:

By the way, the very simple and elegant solution for the Militari style is just a matte dark green body body + antenna. And immediately an association with military equipment.

And so you can make a salon in jeeps with a hunting camouflage. In addition to style, it is also quite practical.

Well, now interesting.

Fashionable colors of camouflage

6 Camouflage Painting Style - Camouflage Highteke Colors or UFO Camouflage. Look at possible colors

And such combinations of colors can pick up a lot. Boldly open Google, dial the UFO Camo there and look for inspiration. Combine bright, acid colors.
The car will look bright, unusual. In Russia, so far there are very few such colors, almost no.