Homemade heated seats. Heated seats - positive and negative sides. Mountain from heat

Now manufacturers offer drivers many versions of the car. You can choose in advance what useful options will have your car. Great popularity among domestic carslovers enjoy such options like:

• air conditioning,
• electric windows.

Also quite often, cars are retocked by speakers. But here it is not so easy as it may seem at first glance. The fact is that most Melomanians prefer to choose a system to taste, and not the budget factory option. Although it is worth recognizing that the premium cars are set to more than good acoustic systems.

But today it will be not about them, but about such an option as heated seats. Each car owner, at least once, sitting in a heated car, wants such an accessory to his car.

Attention! Usually, for a good heating system, no more than thirty seconds need to feel like somewhere in the tropics.

Special relevance of heated seats has for people suffering from various diseases of the back and cervical. Sometimes it is enough to sit in the seat with heated 20 minutes, as all the pains pass.

Unfortunately, still not in all cars it is possible to install heating seats when buying. Usually, such a limitation concerns the medium and budget class machines. Moreover, even if there is in the price list, this option is very expensive.

It is not surprising that every year more and more drivers are solved on the installation of heating seats with their own hands. This process is very expensive, but not particularly difficult. To carry out it for every motorist.

Types of heating

Immediately it is worth noting that in order to have warm seats in winter it is not necessary to open the trim and independently connect electrical circuit heating. There are alternatives to avoid this. Of course, despite the advantages without flaws, this option did not cost.

Special capes

This type of heating seats does not need any complex installation. It is enough to throw cape on the chair, and you provide yourself with warmth for the entire winter. At least this is how this concept looks at first glance.

In addition to capet on the market, you can also find special heated covers for automotive seats. They are much more comfortable, as they have better fixation, and they will not slide on sharp turns.

Attention! Cape and covers have special heating elements that provide the driver heat.

In addition to simplicity in the installation, the advantages of this heating of seats, which can be installed with their own hands, can be ranked low cost. Unfortunately, without flaws, it was not possible.The most important is the extremely low quality of the whole design.

If you look on the Internet, you can find not one case when the cape flashed right under the driver. Moreover, such devices are distinguished by uneven heating. In some areas, the temperature rises to 40 degrees.

Another weighty disadvantage of capes or cover is a connection method. To activate such heated seats, you need to use the cigarette lighter connector. Taking into account the fact that the average driver has a navigator, a smartphone, a video recorder and so on - this port becomes deficient.

Attention! Even the splitter is not able to help in such a situation. The fact is that this type Seat heating consumes too much electricity and the fuse simply does not stand.

Also, do not forget about the wires that will definitely appear in the cabin as a result of buying capes or covers. Cables can create an emergency, because in critical moments they are very easy to get confused.

Built-in heated

Of course, to establish the built-in heated seats will need to spend much more time. Nevertheless, if you follow the instructions, the time required to carry out this operation can be significantly reduced.

The main advantages of the embedded heating of the seats can be found:

1. The possibility of simultaneous heating both the front and rear seats.
2. All wires are hiding under the lining of the cabin, so it will not be possible to get confused.
3. The system is connected to the wiring of the car. Because of this, the cigarette lighter socket will be free. In addition, the onboard network can well cope with such a load.
4. Since heating is embedded inside the seats - the original interior of the cabin is saved.

As you can see, despite some difficulty in the installation, the built-in heated seats has a number of sweese advantagesTo which you can not pay attention.

Choose a kit

Before you pull the seats to install heating, you need to decide on the kit that you need. The most popular now enjoy the goods of German, Russian and chinese brands.

Naturally, the best quality kits are considered to heal seats from leading German companies. But the cost of them is appropriate. Of course, such systems are installed both on the front and rear seats.

In high-quality sets should be at least several degrees of protection.Also, high-quality seats heating systems usually have not one mode of operation.

It is worth noting that among Russian companies there are brands that provide high-quality and relatively inexpensive products. It is enough to recall such giants as "autothetters" and "warmth". Seat heating systems from these companies have protection, as well as high-quality Tan. For greater reliability, the reinforced cable is used in them. Also, they have a function of overheating, which turns off the device when the critical temperature is reached.

The lowest price is traditionally heated seats from China. Unfortunately, in most cases, goods from this country cannot boast a reliable design or a good protection system. Of course, exceptions come across, of course, but their price is not much inferior to German counterparts.

When choosing a heating system of seats, it is better to immediately buy a high-quality kit, since low-cost devices may have such defects as:

• failure control buttons,
• binding of wiring
• short circuits
• uneven heating.

Taking into account the time you have to spend the installation better to immediately buy a high-quality set, so as not to spend your strength to repair.

Heated with their own hands

With some knowledge of electrical engineering heated seats can be made independently. Nevertheless, the reliability and safety of such a design will be not very high.

To make heated seats with your own hands, take a nichrome wire with diameters in a half-meter. Form four spirals. To do this, use a wooden bar with two clogged nails at a distance of 4 cm.

Important! Check out the eight.

Take a dense denim fabric and connect all the helix parallel to it. The power supply must have a power of at least 12 V. The final calculation rate will be 40 W. Also, do not forget to install the relay in the heated seats made by your own hands.

Installation

Preparation

Any worthwhile business begins with training. After you have chosen and bought a kit, you need to take care of the selection of the relevant task of the tools and materials. To install heated seats of the car with your own hands you will need:

• plastic clamps
• multimeter,
• screwdriver Set,
• spanners different sizes,
• scissors,
• tape and bilateral scotch,
• shrink tubes,
• marker,
• pliers,
• glue,
• soldering iron.

This is a standard set. Simply put, without these tools you will not be able to do when installing. But you must take into account that there are systems of different complexity. Moreover, much depends on the base supplies set. Very often in cheap sets there are no needed to install wires or fuse. In this case, you will have to buy them yourself.

Attention! As a wiring, it is best to use a multicore wire with a cross section of 2.5 mm2.

Installation

Before proceeding directly to the installation, calculate in advance where you will install the control buttons. Also select the appropriate fastening type. After selecting the right place to install manipulators, just follow these instructions:

1. Remove the chairs and disassemble them. You need to remove the headrest, as well as disappear all plastic elements.
2. Remove seat trim. It is usually fixed at the bottom with the help of metal rings. You can do without complete removal, the main thing is that you calmly be able to install heating elements.
3. Remove the seats covering. To make it necessary to disappear plastic headrest housings.
4. The heating element must be put on the foam rubber and with the help of the marker to circulate the contours. Then they glue bilateral scotch strips and glue is applied.
5. Elements are fixed on the back and seat.
6. Display power wires.
7. Install back trim.
8. Return the inserts and head restraints of the seat.

At the very end of the seat are installed back, and the wiring is stacked.

Connection

To connect the heated seats, you need to use the scheme that will go bundled. You can detect the power circuit with a multimeter. At the same time, the plus wire of the thermostat is connected to the ignition lock, the minus cable goes to the ground. The backlight of the button is connected to the cigarette lighter contacts.

Attention! All connections are in the end roll and are isolated.

RESULTS

As you can see, install the heated seats under the power of each car owner. The main thing is to properly prepare for installation, collect the entire set of materials and tools, as well as purchase a high-quality heating system or make it yourself.

In the cold period of time (winter or autumn - spring, yes, my wife sometimes includes in the summer), very convenient in the car heated seats. But here's just the whole problem is that it is not installed everywhere! Although I think - that, seats - should be in the base of all cars manufactured in Russia, yet we have a harsh climate! Well, okay, bought a car in the database, but there is no "warm" seats! What to do? Calmly, they can be installed with their own hands, today I will show what it is better to install - and also how to do it ...

If you bother all installation options, it becomes clear that there are only four of them:

• External or "Cydushka", cover.
• Regular, installed on your car in the grade above
• Inner or hidden third-party, but factory.
• Internal homemade - option only for those who understand the electrics of the car.

External or "Cydushka" - Case

Overhead heating

The most thing is not to eat, an easy way. Probably, everyone saw such heated in auto shops. Usually selling this is the lining on the seat, the photo.

Which you just buy and dress on any front chair. It is an overlay, made of rubberized or just dense tissue, with heating elements inside. They are fixed on the seat they are special stretch marks - rubber bands, with metal hooks. Tensioning - pinch the hooks down to the springs of the chair and the heater is ready. Power is served from the cigarette lighter, just insert - starts to warm, pull out - stops. Very primitive option. To be honest, I did not consider such a heated - never! Just because I don't like him, looks like "by collective farm." There are more minuses:

• The cigarette lighter is constantly busy, and if you have more gadgets that work from him!
• In 90% of cases, there are no temperature adjustments. It can be late just like a frying pan.
• Constantly heels on the seat, it is difficult to fix it.
• It is difficult (practically it is not possible) to install on the rear seats.
• I repeat once again - it looks bad!

You know, yes, and the price is not always adequate, personally I saw such and 1000 rubles per seat per 1, I think it's really expensive (although in most cases this option is the most budget, about 300 - 500 rubles a chair). So - if you need urgently and no time to bother, then you can take, but if there is time - then you can consider other options.

Heated Cove

Now the option is distributed - stretching on the seats of the cabin, covers. There are a lot of them since tissue, ending with eco-skin or genuine leather. You can transform the salon and make it representative.

So the secret here is also simple - the heating elements are sewn into such covers - stretch to regular "sids", and then they are then connected to the onboard system of the car. The big advantages are that heating is hidden inside, it is not visible, that is, he fits harmoniously. It can also be connected immediately, and on all seats front and rear. Often with such heating there is a custom level of comfort, that is, you can adjust the temperature - more and less.

However, there are also disadvantages - do you have these covers, rightly pull, because it is better to make masters. The cost is high, imagine how much the covers will be made of genuine leather, and after all, you need to add more to them! Connect and embed the buttons again by professional auto electrodes, or just knowing motoristsOtherwise you can burn the car.

This option is certainly better, but also not very desirable. I will say so recently one familiar pulled salon Kia. Rio covers from eco-tree heated. The covers themselves came out about 12,000 rubles + installation and connection of another 6,500 rubles. Total almost 20,000 rubles. Not enough!

Station heating is installed on your car in high grade

This is probably very optimal optionFor example, in some foreign cars in the "base" no heating, although in "high" equipment - it is. You just need to purchase it and install it with your own hands, it is easily done either official dealerOr the sellers of original spare parts. Immediately I want to warn you - as a rule, no complex dance with the tambourine is required, because both the block with fuses, and the wiring will already be laid out from the factory, you only have to connect the elements and thermostators themselves.

Of course, the only complexity will be removed the sewing trim, but now on the forums you will find a lot of instructions, I think it is not a problem at all.

Next, simply sample on the foam rubber and back up full covers - we cut the buttons - we carry out the necessary wires, all heating is ready. The procedure is done by hand for half a day. If you beat for money, it turns out on two front seats two elements cost about 3000 - 5000 rubles, it all depends on the class of the car + wires and buttons, it is about 2000 - 3000 rubles. Total on the ordinary class "B - C" class of about 5000 - 8000 rubles.

Third-party, but factory heating

Well, if there is no regular heating? What to do then? Quietly, you can buy third-party factory, now I am very praised by our Russian company "Emely" is designed for almost any car.

The main thing is to choose the size of the "sidushka", it is important to understand - that it is not necessary to heat all the place, but strictly in the center, side pillows (for support it is not installed).

The principle is also simple - removing the regular seat covers, deploy - we glue mats - then wear covers and connect to electrical system. You can do everything with your own hands, the kit is about about 2000 - 2500 rubles., Two seats (back + lower part). Small video, look.

Homemade, do it yourself

In modern heating, the so-called is used - heating cable (or mats), which are now sold in wide access. Sometimes, even simply take the wire nichrome and used as a heating element. So with the help of these elements, you can make heating yourself, in the literal sense of the word.

For example, a cable can be sewed on the fabric and attached to the seat. Mats are generally ready for installation.

The idea is not new. I will scatter, perhaps the most interesting with the wire.

• We take 3 meters of wire and divide in half, 1.5 on the "seat", 1.5 on the back.

• Send it to a piece of matter, even old jeans are suitable. The most successful way zigzag.

• Next, we connect to 12V and check, the wire will begin to slowly crack, and after about 3-5 minutes the seat will be warm, not fiery, namely warm.

With the onset of cold weather, motorists think about the heating of the car seat, the first thing comes to the mind to buy covers or heated capes. But unfortunately they are not always suitable in size to the chair and create discomfort while driving. In the article, consider how to make heated seats with your own hands, although it is more difficult to realize what to buy capes, but it is worth it.

In order to mow in the seat heated, you will need:

• A set of details for heating seats (Suppose a set of "Emely"), its value is about two and a half thousand rubles;
• Wires: Approximately 6 meters of stranded wire 2.5 mm cross section for use as a power cable, for a control wire with a cross section of 1.5 mm, (two two-meter slices);
• Fuse connector and fuse itself;
• Wire with a cross section of 1.5 mm (control), 2 meters long;
• 6 mm terminals with a washer tip and pads clamping mom-dad;
• M6 nut self-fixing;
• You can take corrugations for laying wires with a diameter of 4.5-8 mm;
• Insulating tape;
• Plastic Clamps;
• Red LEDs;
• Shrink tubes;

As well as a different tool: screwdrivers, boards, screwdriver, scissors and knife, file, keys.

Installation of heating seats with their own hands

For example, it is taken to install seat heating with their own hands on the BMW, in the seat of which the plant is installed by a feminine, airbags under the seat, battery in the trunk, (and not in the capal space).

These factors somewhat complicate the installation of heating.

If we talk about the "Emel" set for mounting heating in the seat yourself, then the connection scheme is placed on its box with which there should be no questions.

First of all, it is necessary to remove the seats from the mount (because heated is mounted inside the seats). On the different machines The design may differ, especially careful if you are making heated seats with your own hands in a car with installed security pillows. There is a danger to damage the pyropatron when dismantling the seats. It is better to see the schemes, how to shoot and install the seats specifically in your car in those. documentation.

Attach the heating mats to the seat, sign and mark the place, for the slots, with the help of which the mat will be attached to the skeleton of the seat and its trim. Naturally (and in the instructions, they are also warned) the heating threads cannot be cut.

Having made the slots, the heating mats to the seats are plastic clamps through them.

Through the seat foam rubber stretch the power wire of the heating mat. It is recommended to display this wire from behind, closer to the armrest. It is quite reasonable to place this wire in the corrugated tube of PVC (by the way, it is so "native" heating from the plant).

Quite often, the standard wires are short and do not get from mats to the place where the regulators will be mounted, so they are increased by the same wire, running the joint and placing the wire in the corrugation.

Power take away from the power cable, through the fuse and connect to the battery, to the plus terminal. If the battery is ahead, then it is easier to do, and if you find an AKB in the trunk, you will have to dismantle the rear seats to stretch the cable in the cabin, under the carpet. Remove the plus terminal or disconnect the fuse before you continue.

Wires coming from regulators to heating elements required to hide in the corrugated and gently pave under carpets. It is important to remember that the wire does not stretch, leave the slack, the stock in the case of the seat shift back.

Regulators are likely to install where it is convenient for you, as it is not suitable for a regular place for regulators on the console. And if you buy "native" heated control buttons, they can be more expensive than the set that you install.

A relay is left in the seat heating kit to connect the plus wire to the ignition lock. Just carefully follow the instructions of the kit and the connection scheme itself to the ignition lock. Although contact numbers in cars may vary, the wire should be soldered to the contact, on which +12 volts appears when position No. 2 of the ignition lock.

Now all the wires connected to the relay (control and power to heating mats) cut off, leaving a small supply, clamp (or solder) into the "Mom" connectors, wear a heat shrinking tube and connect to the relay itself. Wire mass, plug into the body in the most close place.

Thus, a little worked, you equip in your car heated seats with your own hands and stop depending on the cold weather overboard vehicle. This is not a difficult job for who can handle the simplest tools.

How to make heated seats do it yourself - video

The climate in Russia is suspicious, and many motorists prefer to install heated seats in their car. This not only increases the comfort of movement, but also protects against many diseases associated with constant supercooling. In new cars, such a function is most often provided in initially, but the owners of domestic cars are often forced to solve the problem independently.

Varieties and principle of seat heating

Heating can be removable and embedded. The first option is all sorts, in which the heating elements are built and which are attached to the seats to straps. Their main disadvantages: during the movement of the car, they can crawl, causing a lot of inconvenience to the driver. In addition, the power supply system of such devices, which is not always convenient.

The built-in seats heated is deprived of these drawbacks, as it is under the upholstery, and a special unit is used to power. Its use has several advantages at once, which determine the high popularity of such devices on russian market:

• Under the upholstery and back of the seat will provide reliable and convenient operation. Heating does not hurt the upholstery, even for leather salons there are special options.
• The built-in heated seats is immelved from the side, so it does not spoil the general view of the cabin. Do not find it to the touch, he does not put the position of the chair or do something in the cabin.
• The cigarette lighter remains free, the wiring is hidden from the views.
• The control unit is located where it is convenient to the driver.
• You can adjust the heating using the thermal.

As a heating element in such devices, a wire hidden in the plated mats, which are installed directly under the upholstery. The device is equipped with protection against closing and appearance of sparks, so it is safe for use, and proper installation He is guaranteed for many years of stable work.

On video - Installation of built-in heating of seats:

What manufacturer to choose

Automotive accessories stores offer enough such products. German, Chinese and Russian companies remain the most popular manufacturers. Many choose the built-in heated seats of WEACO (Germany): it can be installed in all cars, it has several degrees of protection and two heating modes. You can enable emergency mode for quick seats in winter, and then enable supporting mode, providing uniform moderate heat. However, the price for german quality Considerable, so many prefer cheaper products.

Popular Russian models

The company "Teplood" is engaged in the production of heating devices for more than 15 years. The most common models of heating seats - "Emel of the Criminal Code 1" and "Emel of the Criminal Code 2". They are great for the production of domestic auto industry and are already applied in the configuration of the model. In all models there is a thermal protection against overheating, a flexible and durable reinforced cable serves as a heating element.

The "Emel of the UK 2" kit allows you to install the blocks that control the temperature is far from each other, which allows you to make control more comfortable. The device has 4 modes of operation, as well as the automatic shutdown function when overheating. The kit is standard mounted into two front seats and is placed under the upholstery.

Also on the Russian market presented products from Avtotherm. Instruments can be trusted, and they can be installed both in Russian and in imported cars. Warranty on all models - at least 1 year.

On video - Cape for heated seats:

Eastern Manufacturers: Is it worth saving

The most cheap on the market remains the products of Chinese and Taiwanese firms. Some choose the built-in heated of the Magalight company (Taiwan) or Autolaine International (China). They give good heating, but do not differ reliability: the buttons break quickly, the electrical wiring or the device suffers from overheating. Drivers often note that the temperature is uneven: it is too hot, then cold.

Buying a cheap product is always an additional risk for the driver. A short circuit can not only destroy the entire wiring system, but also lead to fire in the cabin. When choosing electrical equipment, it is better not to save and choose Russian or European manufacturers.

Security measures when using built-in heating

Although such devices are distinguished by reliability, it is still necessary to observe several important rules operation:

1. It is impossible to lay heavy or sharp objects, since there is a risk of damaging the trim and heated.
2. You can not use heated if the seat is wet. Random spilling fluid can lead to equipment breakdown.
3. You can not cover the seat with the heated heat insulating objects: blankets, coats, etc.

You can only install the installation in the event that you are well versed in the installation of electrical equipment. It is often more reliable and safer to contact the service, as you need to disassemble the chair and mount the wiring in the cabin.

Built-in heated car seat - heat and comfort for driver. Take care of your well-being and take advantage of this modern device.

Seat heating function have each modern car. Almost everyone. If your seat in your car does not heated, does this mean that the car is defective? Of course not. Heated seats - a useful thing, but they need to be able to use, otherwise the warm chair can bring more harm than good. If still there is an irresistible desire to warm the body through the back, then you can install heated seats with your own hands. But first we'll figure it out, whether it is worth it.

Mountain from heat

The first to froze the Swedes in the world. So much that installed on the serial Saab 99 the option of heating seats back in 1979. However, the patent for the invention was issued at all the Swede, but the American Robert Balloard back in 1955, and in ten years as an option, the warm seats were offered along with Cadillac Fleetwood. Today, almost all cars can warm their owners and their passengers with seats, and older owners are trying to insulate the car with their own hands.

Heated seats is a fairly useful thing, just not everyone knows that it can sometimes be harmful. Cautious doctors scare even the loss of reproductive function in men, if you use heated by the rules. In addition, the doctors do not recommend using warm seats if the driver carries over 4 hours per day.

Video of seat heating device

In this case, there is a direct threat to health, namely:

• warming stimulates the growth of any tumors, including those who do not want to talk about, and with the slightest suspicion for the presence of oncological diseases about the warm seats, it is impossible to even think;
• loss of control over inflammatory processes can lead to edema and lymphostasam, it means that in the presence of any inflammation in the body of any inflammation can aggravate the disease and lead to its difficult form;
• a sharp change of temperature can lead to an elementary cold, since sitting on a warm seat, the adequate perception of the temperature below is reduced, and the sharp cooling of the lumbar hotel will not lead to anything good.

Everything, there will be no horns anymore. Our business is to warn. Now just good.

Constructive solutions for heating

There are several of them, but the essence is the same - to ensure uniform heating of seats with minimal energy loss and minimal intervention in the electrical equipment of the car. For this purpose, manufacturers have developed several variants of warm seats that are not fundamentally different, but having a different level of integration. The easiest of them is a cape. Such a heating system can be used on any car. There are models that can work from the cigarette lighter, but it is not too convenient. Wires chat under their feet, there is a chance to arrange a short circuit. More complex sets involve connecting to the electrical equipment system. Heated Covers are good because they can be easily installed, and it is also easy to remove. Badly in them is that almost all covers have no adjustment. They either warm or turned off.

Built-in heating systems are much more complicated in the installation. To set such heating, you need to fully disassemble the seat, mount the heating element, output the wires, and after collecting the entire design back. Not every thermal-loving driver will go to such victims. But those who ventured this step have a full package of heating system control options.

Dear models have a heating current regulator, a short-circuit protection, can have a sensor that works only when the driver sits into the chair. The heating systems and the type of heating element are distinguished. Cheap models are heated with incandescent threads, and such systems are better not to install, especially if they are not external, but embedded. When breaking one thread, the whole system ceases to work, you have to make repairs and fully robbing the seat. Preferably the heating elements of the belt type. Such instruments are an order of magnitude more expensive, but it is much better to warm and are not afraid of the cliff of threads simply because there are no them there.

Heated seats do it yourself

Sites for heating seats are quite a lot, so everyone can choose which kind of pocket. there is general recommendations By installing additional heating of the seats, if it is set, and some questions may arise when installing heating on a clean seat. Even dear cars Heated is not always equipped with a full-featured system. For example, on the Toyota Tundra in the base installed only the front seats, and then the dual-mode.

Heated the rear seats is set separately, but it is necessary to take into account the load on the fuses and include the heated of the second row through a more powerful fuse. For cars, whose in basic configuration No heating, but there is an opportunity to install it optionally, you can always buy regular carbon mats heating from an authorized dealer. System of heating seats for Ford Focus 2 The officials will cost about 3 thousand rubles along with the regulators. Voltage. It is installed according to the instructions and no problems cause.

There is another option to pay attention to those who want to install a cheap heating. At Kia Rio in two configurations, heated was installed, but rarely who enjoys them simply because after 10 minutes of work, it is simply impossible to stop in the chair. Too warm. Therefore, before making heated seats with their own hands, it is still worth thinking how important this option is.

• news
• Workshop

Ban on manual traffic police radars: in some regions it is removed

Recall that the ban of manual radars for fixing violations of traffic rules (Models "Sokol-Visa", "Berkut-Visa", "Vizir", "Vizir-2m", "Binar", etc.) appeared after the letter of the head of the Ministry of Internal Affairs of Vladimir Kolokoltsev about the need to combat corruption in the ranks of traffic police officers. The ban began to act on July 10, 2016 in many regions of the country. However, in Tatarstan, DPS inspectors, ...

Lotus will release a crossover

In fact, the first crossover Lotus was to appear a few years ago. In 2006, a concept crossover Lotus APX (in the photo) was presented at the Geneva Motor Show (in the photo), which in a couple of years had to reincarnate in serial model. A year later, its electrified version was presented, but financial problems at the Malaysian company ...

Limousine for the president: the next details are disclosed

The site by the Federal Patent Service continues to be the only open source of information about the "Authority for the President". At first, we patented the industrial models of two cars - limousine and crossover, which are part of the project "County". The tinnitus registered the industrial sample called the "car instrument panel" (most likely, it is ...

SUV GMC turned into a sports car

hennessey Performance Tumbled has always been famous for its ability to generously add additional hitch of "pumpable" cars, but this time the Americans clearly embarrassed. GMC Yukon Denali could turn into a real monster, the benefit that the 6.2-liter "eight" allows you to do this, but Hennessey motorists limited themselves to a rather modest "bonus", increasing the capacity of the engine ...

In Helsinki banned personal cars

In order to embody such an ambitious plan into reality, the Helsinki authorities intend to create the most convenient system in which the boundaries between personal and public transport Will be structures, reports autoblog. As a specialist in transport of the city hall of Helsinki Sonya Heikkil, the essence of the new initiative is quite simple: the townspeople should be ...

In the new calendar Pirelli, Professor MSU

In the shooting of the cult calendar took part hollywood stars Kate Winslet, Mind Tourman, Penelope Cruz, Helen Miren, Lea Seid, Robin Wright, and a specially invited guest became Professor MSU Anastasia Ignatov, reports Mashable. Shooting the calendar is held in Berlin, London, Los Angeles and the French town of Le Touquet. How...

Named average price new car in Russia

If in 2006 the weighted average price of the car was approximately 450 thousand rubles, then in 2016 - already 1.36 million rubles. Such data leads an analytical agency Avtostat, who has studied the situation in the market. Like 10 years ago, foreign cars remain in the Russian market. Now the average price of a new car ...

Video of the day: Electric car is gaining 100 km / h in 1.5 seconds

An electric car called Grimsel was able to accelerate up to 100 km / h per 1.513 seconds. The achievement was recorded on the runway of the aviation base in Dowendorf. The Grimsel car is an experimental car developed by students of the Swiss Higher Technical School of Zurich and University of Applied Sciences of Lucerne. The car is created to participate ...

Toyota plants stood again

Recall, on February 8, the Toyota Motor autocontracene for a week stopped production at his Japanese plants: from February 1 to February 5, employees were first forbidden to work overtime, and then it came to a complete stop. Then the reason was the lack of steel rental: on January 8 at one of the factory suppliers owned by Aichi Steel, an explosion occurred, ...

Citroen prepares suspension type carpet aircraft

In the Citroen brand represented by the Concept of Advanced Comfort Lab, built on the basis of the C4 C4 Cactus serial crossover, the most prominent eye of the innovation are, of course, chubby chairs, more similar to home furniture than on car seats. The secret of the chairs - in a package of several layers of viscoelastic polyurethane foam, which usually use manufacturers ...

What are the reliability ratings for? We will be honest with each other, almost every car enthusiast often thinks: the most reliable car - My, and I do not give me a lot of trouble with various breakdowns. However, it is simply the subjective opinion of each car owner. By purchasing a car, we are in ...

Choose a car: "European" or "Japanese", buying and selling.

Choose a car: "European" or "Japanese" going to acquire new car, the car enthusiast will undoubtedly face the question of what preferred: the left handlebar of the Japanese or the right - the legal - "Europeans". ...

What Hatchback Golf Class Select: Astra, I30, Civik or still Golf

Central figures. Local traffic cops do not show any reaction to the new "golf". According to observations, they are much more like throwing "Honda" (apparently, rare in Ukraine). In addition, the traditional proportions "Volkswagen" are so successfully hiding an updated body platform that the average man is difficult ...

The most expensive world car

There is a huge amount of cars in the world: beautiful and not very, expensive and cheap, powerful and weak, their own and strangers. However, the most expensive car car alone is Ferrari 250 GTO, it is 1963 the release and only this car is considered ...

Where can I buy new car In Moscow?, where to sell the car in Moscow quickly.

Where can I buy a new car in Moscow? The number of car dealerships in Moscow will soon reach a thousand. Now in the capital you can buy almost any car, even Ferrari or Lamborghini. In the struggle for the client, the salons go to all sorts of tricks. But your task ...

Each owner of the car seeks to protect himself from emergency situations associated with accidents on roads or other harm to its vehicle. Some of the options are the conclusion of the CASCO Agreement. However, under conditions, when there are dozens of firms that provide services on the insurance market.

What machines are hijacked in Moscow most often?

For the last 2017, the most hijacked cars in Moscow are Toyota Camry., Mitsubishi Lancer., Toyota. Land Cruiser. 200 and Lexus RX350. The absolute leader among the stolen cars is sedan Camry.. He occupies a "high" position even, despite the fact that ...

Elegant cars stars

Celebrity machines must match their star status. It is impossible to come on something modest and publicly available to them. Their vehicle must match their popularity. The more popular the person, the exquesting the car should be. Stars, popular worldwide, start this review with ...

Requirements that are presented to additional equipment In the car, they grow rapid pace. Up to the point that the cabin elementally lacks the place to accommodate all the necessary equipment. If only DVRs and air flavors prevented over the review, then today the list of devices, ...

• Discussion
• In contact with