Applying liquid glass on the painted surface. Features applying liquid glass on car body. How to make a floor screed

Construction - the sphere of extensive use of liquid glass. This is explained by a wide range of material properties. List them:

• moisture resistance;
• excellent adhesion to most surfaces;
• chemical inertness;
• antiseptic action;
• fire resistance;
• abrasion strength;
• low thermal conductivity;
• anti-corrosion properties;
• lack of toxicity;
• wind resistance.

Liquid glass is, first of all, the ingredient. In its pure form for construction purposes, it is applied less often. Industrial production of liquid glass is firing (sintering) a mixture of quartz sand with soda, grinding the resulting product and dissolving it in water.

Varieties

Liquid glass is a solution of sodium silicate or potassium silicate in water. For its production, both of these salts or lithium silicate are also used. In this connection, several types of material distinguish:

• sodium;
• potassium;
• sodium-potassium;
• potassium-sodium;
• lithium.

Kaliyeva glass finds the greatest use as a binder component and for making enamels. In the construction of the leader protrudes sodium liquid glass. Consider each option of its use separately.

Waterproofing

Water-repellent properties allow the use of liquid glass to waterproofing a wide variety of construction objects: pools, wells, garages, walls, floors and foundation of premises. Especially relevant for regions with a wet climate and frequent precipitation.

Waterproofing foundation

In order to create a reliable waterfrost barrier of the foundation, it is necessary to cover the concrete surface with two layers of liquid glass, giving each of them to dry completely. Such a method is called coherent and provides for subsequent protection with rolled waterproofing materials.

When processing the resulting cracks, as well as for the seams, a cement mixture with the addition of sodium liquid glass was successfully used for the fusion of the foundation from brick or concrete blocks. It will take cement, liquid glass and water. At 1000 g of cement, no more than 50 g of liquid glass is taken, poured it into water and this solution is mixed with dry cement. On 10 g of glass should have 150 g of water. Prepare a small amount of mixture to spend it as quickly as possible because the solution quickly freezes.

The third option to create a moisture-proof foundation is the addition of liquid glass into a concrete mix for filling the monolithic foundation. To do this, need:

• cement;
• sand;
• liquid glass - 5% of the total volume of the mixture;
• water;
• crushed stone.

Procedure:

• pre-prepare everything for the fill of the foundation (, lay the reinforcement);
• mix cement with sand;
• dissolve liquid glass in water and added to the cement mixture;
• add rubble and immediately start the fill of the foundation.

Pool and Well Waterproofing

Liquid glass is used both for internal and for outer waterproofing of pools. In the first case, the material applies 2-3-metered layers to the floor and on the walls of the pool. Pre-liquid glass is processed by all joints and recesses. This method serves as excellent sealing. In the second case, the liquid glass is a component of a concrete mix that reliably protect the pool from the effects of groundwater and ensures the strength of the base.

For waterproofing, the well is prepared by a mixture of equal parts of the sifted sand, cement and liquid glass, it is deceived by the seams and joints, and then the remaining surface. For greater effect before this, wake the walls of the well with liquid glass.

Waterproofing of basement with liquid glass

The problem of getting water into the basement through the seams or the concrete itself is often found. A good solution to its solution is waterproofing using liquid glass. If the seams proceed, the actions algorithm is as follows:

• carefully clean the seams from the debris and dust;
• prepare a repair mixture of portland cement and liquid glass in a 20: 1 ratio, add water to the preparation of thick sour cream;
• tightly lay the resulting mixture in the seams and large cracks;
• mix the surface with water with a brush;
• after a day, make treatment with liquid glass.

With moisture content of concrete walls, they are processed in a similar way, trying to make a layer of the mixture with dense and thick. Do not forget that the preparation of mixtures with liquid glass content is carried out by small portions for fast use.

Fireproof

The refractory properties of liquid glass are used:

• in masonry stoves and fireplaces;
• when creating chimneal pipes;
• for processing metal elements and buildings designs;
• in the production of heat-resistant brands of concrete and refractory enamels and paints.

To prepare a refractory solution for the construction of a furnace or fireplace, mix cement, sand and liquid glass in a ratio of 1: 3: 1. Use small portions, and glass is inserted into the solution last. Liquid glass also gives refractory properties to the tree.

Antiseptic

Wooden objects and structures are treated with liquid glass dissolved in water in order to protect them from the appearance of fungus and mold. It is also possible to carry out the antiseptic processing of concrete or plastered walls of the room.

The surface is covered with at least two layers of a 40% solution of liquid glass with a brush, giving each layer how to dry. Consider that painting and plastering of walls treated in this way will be difficult, so weigh everything before using liquid glass. The price of it begins from 15 rubles per kilogram.

Other applications

Applied to the facade of the building, the liquid glass prevents the weathering of the material. Some craftsmen add it to a solution for self-creation of a bulk sex. The coating of walls and floor in the bathroom has an efficient water and flooring. The material is a durable glue, which reliably connects the tree, fabric, cardboard, porcelain, glass and other surfaces.

Various mixtures based on liquid glass are often used in the repair process and during construction work. Is it possible to handle a brick with liquid glass?What is it and how can I work with it?

A wall treated with liquid glass has a high resistance to the penetration of moisture and the destruction of the brick.

Liquid glass and working with it

Let's start acquaintance with liquid glass. What is this substance? It is based on sodium silicate. Sometimes used more expensive product - potassium silicate.

• enough high price mixtures;
• the need to spend the packaging completely.

After opening the packaging (Image No. 1), the glass is quickly frozen. In construction, separate components are used more often to compile solutions. It costs much cheaper than the finished mixture. If work is not very much, then you will need:

• bucket;
• drill for mixing;
• pulverizer or brush;
• cement;
• sand;
• water;
• construction spatula;
• overalls and protective equipment (Image No. 2).

The bucket must be intended for filling it with liquid glass. Silicates are very toxic. Therefore, it is impossible to make proceedings to them food. Drill need to be equipped with a special nozzle. Sand is necessarily used asking. Dilute liquid glass with cold water. It is better to use small dimensional tanks. This will not give the opportunity to pour the amount of water into the solution. Typically, the solution is made up of a concrete solution or from cement, diluting it with liquid glass. On 1 piece of glass take 10 parts of the solution. If the instructions are indicated by other proportions, you should use them.

Protective gloves and glasses are simply necessary when working. Clothes are better to pick up rough. It can be made of rubberized fabric or from tarpaulin. Conventional fabrics very quickly come into full disrepair, as the mixture has high alkalinity. Splashes of the material that fell on clothes can be removed by mechanical way. The frozen glass is cleaned with a knife. To facilitate cleaning, you can close the stains with water with water with water and hold a few hours. Large straits remove very difficult. It is better to prevent them.

Image No. 2. Defense means when working with liquid glass: gloves, glasses, respirator.

These mixtures are used to handle floor and walls. Thickness standing can reach 3 mm. It is a very durable film to protect the structure from moisture and give it additional strength. We are treated with liquid glass walls of various wells and pools.

The gamma of flowers of these mixtures is very scarce. High alkalinity material destroys almost all color pigments. More resistant to dyes mixture based on potassium silicate. Silicate composition paints can be purchased in stores and mix them with liquid glass before use.

In order to achieve greater hydrophobicity, you can add no more than 5% of organic polymers to the total weight of the mixture. The most good clutch can be obtained if you apply glass to cement or lime blotch. Alkyd or acrylic paint should be carefully taken from the surface.

Liquid glass and brick

Is it possible to apply liquid glass on the brick? In the rules of its application it is written that it is categorically impossible to do this. This mixture can completely destroy the brickwork. But the solution dries quickly. This makes it possible to apply it to brick walls in small portions (Image No. 3).

Visible leaks are immediately removed from the surface. The mixture based on sodium silicates is used on mineral surfaces, the potassium glass is better used in an acidic environment. The ease of application allows you to use this substance quite wide. It has special properties:

• high moisture resistance;
• adhesion to many types of surfaces;
• inertia with respect to most chemicals;
• excellent antiseptic;
• the highest degree of fire resistance;
• strength;
• very low thermal conductivity;
• high anti-corrosion properties;
• material non-toxic;
• it has great wind resistance.

These data allow you to use the composition for processing fireplaces, heating speeches, chimney pipes. To use glass in the processing of furnaces and fireplaces you need to mix liquid glass with sand and cement. On 1 part of the cement, 3 pieces of sand and 1 piece of glass are taken. Everything is thoroughly mixed and applied to the processed surfaces by small portions. When working, it is impossible to make the mixture into the eyes. If it fell into the eye, it is necessary to rinse them immediately with a large amount of clean water.

Remember the main thing

Liquid glass gives a film on the surfaces, which does not blur in water, does not release toxins, does not react to chemicals. It is used in the manufacture of durable paints, bricks with heat-resistant properties, forms for enterprises engaged in metal castings. Liquid glass is used in factories in the manufacture of soap.

In everyday life it is used for waterproofing walls of buildings, pools, wells.

When buying it, you need to choose a dense packaging. It must herdict close. Otherwise, when the glass gets the glass begins to stick. You can store the product up to 1 year, even with severe frosts.

//www.youtube.com/watch?v\u003dhn5gfktdfbw.

When using liquid glass for brick, there is a very small consumption. Material is available at a price. It is used on concrete or plastered surfaces. When working with brick it is not recommended to apply it. Liquid glass sealing pipes, when repairing furniture items. Gardeners use it to process sections on trees. Before pasting the walls of the apartment, glass windows are useful to treat them with glass solution. The main thing in this business is to choose the most correct composition.

Effective car body protection will save impeccable appearance vehicle, providing on its surface "armor", reliably protecting against aggressive environmental factors. As a result of the application of the composition to protect the body of the car, the paintwork becomes immune to scratches, chemical reagents, abrasive detergents. One of the most sought-after options for protecting the body of the car is the technology "Liquid glass".

A brilliant coating after processing is enveloped every millimeter LCP. It is not able to protect against serious mechanical impacts. With an accident or any other emergency on the road, serious damage will be noticeable. However, body treatment with liquid glass has its advantages. The car with the protection of the car body begins to literally sparkle, acquires a glossy to become, with which it looks spectacular and expensive. Such cars easily apply for a representative class, even if it is technically not related to it. Their color is too attractive, which is not lost under sunlight, nor with light electrical lanterns. Professional car body protection is well noticeable in clear weather and during the rain.

Cost on the coverage of the car LCP:

Protection of the car body with liquid glass in the company of defects there is no reliably protect the paintwork of your car for a long time!

Car cover with liquid glass to protect the body

Recently, the protection of the car body has become a rather popular service. This procedure contributes to the protection of the body from scratches and makes the car bright and attractive. In addition, the liquid glass will save the car from the appearance of corrosion and protect it in winter time From corrosion of various reagents. Before protecting the body of the car will be applied, specialists of the center restoration center "Defects-No" estimate the condition of the car. In the course of the inspection, it becomes clear how much the vehicle needs preliminary training. Many motorists mistakenly believe that the application of liquid glass will help to hide the defects of the paint coating. This is not true. Protection of the car body is transparent, and therefore it can not hide the already available chips. Before applying, special preparatory manipulations are carried out in the form of soft polishing LCP.

The main advantages of applying liquid glass on the car body: The body protection material is combined with LCP at the molecular level, has high adhesive properties, firmly fixed in the application zone. Creates a peculiar film on the surface that protects the body's body from external influences on the surface. The composition of the liquid glass does not have an extraneous shade, therefore the protection of the car body strengthens the color of the machine, makes it deeper and saturated. Inexpensive body treatment with liquid glass allows you to significantly improve its aesthetics. The cost of technology in comparison with other types of polishing technologies is significantly lower, which saves on the work, but not on quality. The polyrolol is resistant to the influence of chemistry, natural abrasives on the roads, dust and dirt, as it creates a barrier interfering with their penetration into the structure of the factory LCP of the car.

Universality in applying, due to which the protection of the car body can be used in any season (summer, winter, spring, autumn). Long validity of the composition . If necessary, the application of liquid glass can be repeated in six months of active use by the car, if its owner seems that the coating has become more dull, lost its original shine. On this time it is possible to easily update the car body protection, and not a complete repetition of the procedure. Lightweight version will be cheaper than money and will not require a lot of time. Such "glass protection" is kept longer than wax, teflon analogue and epoxy coating. On average, the period of operation of the body protection of the car is up to 1 year. Keeps auto clean and attractive in any weather, even when it rains on the street. On the road, your car looks extra-class machine. This becomes possible due to the good properties of moisture resistance. The dirt-repellent protection of the body of the car will make it easier to wash the car, saving time and money on visits in the car wash in Moscow.

The principle of the procedure for treating the body with liquid glass is to use a special professional protective composition, which is applied to the car body at a certain temperature and in an ideal clean room. Liquid glass is applied to the surface of the car, and then with the help of rotational movements, the microfiber rubs into the surface of the paint coating. The result of such a procedure becomes shining and brilliant machine.

Stages of applying liquid glass on a car with mileage

Restorative polishing eliminates the body of the car from small defects, thereby restoring its appearance. The duration of this procedure takes about one working day. Even the most outdated models of cars are subject to recovery. The cost of polishing a car is available for many motorists, so it can be done once a year.

Processing with liquid glass in the company "Defects-no" It is a complex protection of the body from mechanical environmental impacts. Car Body Protection Liquid Glass It is applied to a superficially uniform layer for each item. After carrying out treatment on the paintwork of the car durable layer is formed, which serves effective protection From rust, oxides, scratches, water and ultraviolet.

Professional Car Body Protection with Liquid Glassit implies a thorough coating of the car LCP special composition With a coating hardness of Koh-i-Noor. Liquid glass has a fairly strong structure. In the chemical composition of the material is silicon dioxide, which reacts with other active elements and forms a solid uniform film of increased hardness. The solution can only be applied after the complex polishing the car or on new car.

Complex protection of the car body with liquid glass procedure is quite time-consuming and requires high level Mastery, so this process is independently quite difficult to carry out this business to qualified professionals.

Features of the protective coating

1. Liquid glassunlike other materials, protect the body coating comprehensively. Active substances after applying to the body of the machine turn into a solid crust, which has great strength capable of protecting paint from scratches and chips.
2. The main advantage of the protection of the body of the car is considered its large durability and resistance to washing. One application procedure is enough for 60-70 and more mois, depending on the thickness of the application layer and the type of detergent.
3. The composition of the liquid glass will give the body of your car bright and deep shine.

You can highlight the main advantages of liquid glass:

• comprehensively protects the car body from scratches and chips;
• excellent water repellent effect;
• good durability of the material;
• react with factory paint coating;
• does not require additional care;

Liquid glass for car application in Moscow: A durable film protects the car not only from scratches, but also from the effects of solar ultraviolet rays that contribute to the fading of paint.

After car processing with liquid glass Paintwork will significantly become stronger and more stable to negative environmental impacts. The composition of liquid glass will last more than eight months. It is worth noting that treatment with liquid glass is most. budget option Effectively protect your own car in the winter season, because this coating is resistant to different saline and acid reagents.

When is the protection of the car body economically justified?

The cost of treating the body of the car with liquid glass is quite accessible to most car enthusiasts. According to statistics, every third vehicle owner enjoys this service. However, in order to save ways, some motorists are trying to apply liquid glass alone. As a rule, this does not lead to the desired result, while it is necessary to possess certain experience, knowledge of the technologies of applying protective polymer compositions.

When conducting pre-sale preparation The protection of the car body will improve its aesthetics, which means to increase the cost of the vehicle in the market. Many buyers first of all pay attention to the "external picture." In this regard, the protection of the car body is a kind of way to avoid costly restoration work.

In the preset season, before traveling on a business trip, long journey through high-speed tracks. Timely treatment of the body with liquid glass and the imposition of an additional water-repellent layer will reduce the risk of pollution and damage to the car on the road. To update the appearance of a car that does not have serious defects on the body surface. Similar protection of the body of the car with liquid glass will benefit the car against the background of other TCs.

After buying a new car, each of his owner wants as long as possible, to preserve the shine and the radiance of the paint and varnish. Unfortunately, climatic and road conditions In our country, far from ideal, the car quickly loses its original gloss and respectability, covered by the smallest scratches. This not only deprives the brilliance car, but also contributes to the corrosion of the body, since along with the brilliance, the factory paintwork loses and a certain part of its protective properties. The smallest particles of sand and gravel, effectively affecting the coating, literally act as a stack, imperceptibly removing the layer behind the layer, and the reagents that are processed in abundance of the motorways are a kind of catalyst, accelerating the process of formation of corrosion. Rough washing also does not contribute to the preservation of the integrity of the coating. In this regard, the motorist's natural desire is the coating machine with various protective polyrolles. Not so long ago, the liquid glass for cars appeared on the domestic market, today, can be considered one of the most optimal protection methods, and polishing the car with liquid glass reviews the most enthusiastic.

Liquid glass - Innovative technologies for body protection

In contrast to such common protection methods, as the application of various polyterols, usually containing wax, car treatment with liquid glass allows you to protect the paintwork coating much more efficiently.

For the first time applied liquid glass for auto Japan. It was back in 2008. The composition of such a polyroli includes silica and silicate compounds, allows for applying not only on the car body, but also on the glass. This will avoid divorces on the glass, and during a small rain there will be an opportunity and not at all turn on the wipers during the movement. The applied liquid glass for cars, according to reviews, not just instantly removes rubbing and small scratches, but also makes the color of the paint and varnish coating deeper and saturated. The dirt-repellent effect of liquid glass is manifested in the fact that the dirt flying from under the wheels is practically not absorbed into the coating, and it is easily flushed even with a water bottle.

The coating of the machine with liquid glass, according to the reviews of car owners, allows you to achieve sufficiently impressive advantages, compared with other types of protection:

Tip! Use liquid glass protection is better immediately after purchasing a car, if the machine is already operated, preparation for processing this polyrolla must be carried out in specialized Services.

Preparation of auto to independent application of liquid glass

Before applying a liquid glass for cars with your own hands, it is required to prepare all the surface-processed surfaces. In this procedure, even a new car needs, because there is a sufficiently minor run so that resistant contamination, microcracks, in which dirt, bituminous spots and traces of insects are clogged - all this will be completely removed from the car surface. Additionally, before covering the car with liquid glass, according to the reviews of the experienced motorists, it is worth tying all the chips and noticeable scratches on the paint and varnish.

To begin with, wash the entire car using a special shampoo. To do this, use a high pressure washing. This will remove the main, visible part of the pollution from the paint coating. After that, it is recommended to treat cars with a special abrasive paste, thanks to which the most minor dirt particles accumulated in microcracks are removed, since the liquid glass for the car, according to the reviews of the owners, they simply "seal", but will not hide them.

Special attention The spots of bitumen and trails from insects should be used - special cleaners can be used to get rid of them.

After that, all surfaces should be deguted using alcohol-based solutions. It is impossible to use solvents for this, since the effect will be directly opposite. At the final stage, the car is again washed under high pressureBut without using any chemistry, just clean water, and wipes dry with a clean napkin. Now you can apply liquid glass on the machine.

Important! All work should be carried out in a closed room, in the absence of drafts, direct sunlight and dust flows. The car's processed should be cold.

Application of liquid glass with their own hands

Before the processing of the car with liquid glass, the video presented below will give a visual understanding of the volume of the upcoming work and their correct sequence.

The video shows that the liquid glass for auto apply is not so difficult. After performing all the necessary cleaning procedures, you can begin the application of liquid glass on the car. For independent use You can recommend liquid glass for Wilson cars. Possessing quite acceptable cost, it is distinguished by high quality, sold in jars of 300 ml, which is enough for 5-6 coatings (on average, 50 ml per machine). You should not make a common mistake, trying to cover the entire car immediately and quickly, it is more expedient to apply polyrolol for each detail (bumper, wings, hood) alternately. This will create a uniform coating.

Included with the polyrolling there is a sponge for applying and special (often multicolored) microfiber wipes - they are intended for the distribution of the composition. Liquid glass for cars is applied according to the instructions for use, and only with the supplied sponge, soft circular motions. The protective composition can be treated in parallel and plastic / chrome parts of the car (headlights, radiator sink, bumper). After it was possible to completely cover the machine with liquid glass, the composition must be given time in order to begin the polymerization process - as a rule, this period is 45-60 minutes. Despite sufficient simplicity, before applying liquid glass on the car, it is advisable to look at the video - it will help to avoid some errors.

After the expiration of the waiting time, you can proceed to the layout of the composition. To do this, use the napkins from the kit. At the same time, it is quite important not to make chaotic, unsystematic movements. To achieve the best effect, it is better to perform, for example, moving from top to bottom, processing a plot behind the site. In this way, liquid glass for cars, according to reviews and video materials presented in the network, allows you to achieve a dazzling shine that will be maintained for a very long time.

Question Price: Is it worth a new method of your money

It is worth starting with the fact that it is better to cover the car with liquid glass, after it is purchased in the cabin, after which it is possible to periodically update this coating. In this case, the result will be obvious - a bright and glossy paintwork, as well as a significant reduction in the amount of vessels of the car washes, as the processing of the machine with liquid glass gives it excellent hydrophobic properties - the dirt on it is delayed significantly less.

Such a coating as a liquid glass for cars already having a solid life, of course, will not return to the paint and varnish coating by the former pristine, but, nevertheless, it is able to significantly transform the appearance of the vehicle and ensure its due protection. The coating of the machine with liquid glass, in this case, has a number of features, it is possible to perform it yourself, of course, but in the absence of training, it is not necessary to count on the durability of the coating.

The processing of the machine with liquid glass, according to response, allows not to think about the preservation of the paintwork for a period, on average, from six months to one and a half years, depending on the specific operating conditions and climate. Services of specialized centers, where you can cover the car with liquid glass, according to reviews, can do in a fairly decent amount, especially if the machine has numerous scratches and spills of the paintwork, which must be previously eliminated. Although it is enough to watch a video covered with liquid glass to understand that professional training and processing performed by the hands of specialists is quite worth the tools.

Answer the question how much is the liquid glass for cars or how much it costs to cover the machine with liquid glass, is uniquely impossible. It all depends on the manufacturer of polyteroli and the volume of upcoming preparatory work. But in any case, regardless of the current state of the paint coating, the processing of auto-liquid glass has exclusively positive reviews. The main thing about not to forget about the need to periodically update such a coating.

Liquid waterproofing glass is increasingly and more often.

Despite the fact that the installation of liquid glass involves minor difficulties, it can still be done with their own hands.

The article tells that such a liquid glass insulation glass and how it is used.

What is liquid glass?

The peculiarities of sodium glass are refractory, the stickiness and the possibility of interaction with minerals, which is successfully used in the reinforcement of the foundation and the production of fire-resistant and antimicrobial chemistry.

Ceramic glass is highlighted in high opposition atmosphere and acids, which is still used when creating artistic paints.

Liquid glass as material attracts not only with its strength and moisture resistance, but also the ability to resist strong chemical and mechanical effects.

The degree of protection of the surface from moisture and other things directly depends on how deeply the liquid glass penetrates into it. But in any case, first the surface is aligned and get rid of fat.

To apply glass on the material, use either a standard brush or a spray gun.

The composition is applied to the plaster and concrete in such a way that it penetrates inside 2 mm. To protect against moisture is better, it is necessary that the glass penetrates deeper, namely 20 mm.

To make the material on this depth, the composition is applied several times. It does not matter how deeply the glass will go, the main thing is that you should always pay attention to the joints and seams - they must be embedded especially carefully.

For places with special humidity like the pool or basement, a solution of glass with concrete with a ratio of 1:10 is used.

Like insulating material, liquid glass - just excellent option Because of its antiseptic properties.

Plus it seals well, that is why it is used in particularly complex places: basements, attics and other similar.

These places are especially affected by fungi, high humidity and mold, and there are often margins in them, from which the liquid glass does not completely save, but the consequences will smooth.

More glass is used with porous materials, such as plaster or concrete - it restores them and reinforces, in terms of cleaning from microbes.

The antiseptic properties of liquid glass explain its use when processing metals from rust.

Waterproofing is required not only by the walls of the pool or well, but also the foundation. Foundation plates are also processed in several ways.

The first method is most obvious for non-professional. The surface is simply freezed by several layers of glass, after which the isolation of another species is stacked.

In addition to the fault of the foundation, there are other ways to strengthen it with liquid glass.

For example, mix the glass into the mortar. You can add it to the cement, if the leaks in the foundation are very large or if the prefabricated foundation of a wooden house is repaired.

More glass can be missed in concrete, and then the characteristics of the mixture will improve significantly. For example, concrete will dry up faster.

But this plus is not always achieved, because in the case of concrete, it is more important to observe the proportion, and if this is not done, the foundation will lose its strength.

To better understand whether to use liquid glass for waterproofing, it is necessary to have information about its advantages and disadvantages.

Liquid glass is well hampered by water to the surface, perfectly falls on the mineral foundation, easy to use, is spent slightly and is inexpensive.

Liquid glass is a very durable material, because its structure is similar to the diamond structure. For the same reason, the composition has increased moisture resistance and is able to resist rust.

Despite its impressive list of advantages, liquid glass has a number of shortcomings.

Liquid glass quickly hardens, which can be a problem when installing. That is why work with the material is better to provide specialists.

An even serious problem is a waterproofing layer in need of additional strengthening.

Deficiencies, it is necessary to notice, not very much, and liquid glass remains one of better options For waterproofing structures with high humidity or directly in contact with water.

Where is the material used?

Before covering the glass surface, you need to make sure that it is smooth and properly prepared.

Prepared is considered the surface, purified from dirt and get rid of foreign objects (screws, nails and other things).

If the walls of the pool, well or tile in the bathroom are to be processed, it is recommended to wash the material well so that small flaws are more thickened into the eyes.

If cracks, scratches or fastening seams become more noticeable, it will be easier to navigate and correct these defects.

Just need to remember that the surface being processed should be dry, so you need to give it to dry before processing.

Protect the problem surface from fungus using an antiseptic applied after degreasing.

Usually, such actions are carried out with floors in the bathroom, where the formation of fungi and mold is most likely.

If a wooden surface is processed, then it is necessary to process it with flame retardant before waterproofing, preventing fire.

Popularity Material acquired due to ease of work. Today, with its help, many diverse tasks solve.

The use of liquid glass insulation is the first of possible options use.

It is treated with almost any surfaces: walls of basements, concrete floors of the foundation, and sometimes even trees (so that they do not lose juice).

The antiseptic properties of glass make it indispensable when the foundation is erected, the effect of the atmosphere to which is difficult to overestimate.

The base is all the time exposed to temperature drops, destroyed due to increased humidity, over time it is mastered by moss and lichen.

Processing the foundation with liquid glass allows if not excluded forever, then significantly delay the time of destruction.

Waterproofing with liquid glass is not the only use of this material, since it has antimicrobial effects, so it is often used in the processing of housing walls.

The walls often need to be treated from fungus and mold, and nothing will do it better than liquid glass that can not only prevent the development of bacteria, but also to close the microcracks in the surface.

The material can also be used as glue, because it is well attached to almost any surface. It is used to glue the cardboard, glass and even porcelain.

How to use?

Liquid glass is difficult to use in itself, it is necessary to mix with something. What exactly - depends on where the solution will be used.

Standardly uses a glass and cement mixture. To prepare it, you need to stir 10 kg of cement with water (using a building mixer), and then add glass and mix.

The mixture should not solve very quickly. If it is still happening, then you can solve the problem by adding more water.

To prepare a solution used to cover the walls of the wells, the glass is mixed with sainted sand. Sands are mixed with water and glass with a 1: 1: 1 ratio.

When processing well walls, they are first treated simply with glass, and then it is necessary to use the prepared composition.

Glass is sometimes used as a refractory material. This is useful when laying a fireplace or stoves. To do this, use a mixture of glass, cement and sand.

In a standard cement solution (cement and sand 1: 3), liquid glass is added (fifth of the amount of cement).

It is necessary to prepare the mixture as needed - it is better not to harvest about the reserve, since it freezes the composition quickly.

The technology of manufacturing an antibacterial solution is very simple. Glass diluted with water 1: 1.

With antibacterial solution, you should be neat using it when processing concrete or plastered surfaces.

A glass solution is frozen on them, turning into a slippery thin film that subsequently interfered with putty and finishing.

The impregnation solution is also prepared from glass and water, but in other proportions. The liter of water accounts for 400 g of glass.

The solution is obtained liquid, therefore it is applied to the surface with a brush. It is important that each layer is applied to a dry surface, i.e. it is necessary to wait until the previous dried.