How to replace the oil in the Nissan Maxima automatic transmission box. How to replace oil in the CEFIRO automatic transmission box

Filling volumes Nissan Cefiro & Maxima A33

• Fuel - 70l

• - 4.0l S. oil filter And 3.7l without it. Oil class: SG / SH / SJ API.
• - for the engine VQ20 - 8.2 - 8.5 liters. For Engine VQ30 7.4-7.7 l. with reservoir ( expansion tank), from the bottom 0.8l tank. Original antifreeze Nissan or its equivalent.
• - For MCPP: RS5F50V The volume of transmission oil 4.25 - 4.55. For MCPP: RS5F50A The volume of transmission oil 4.5 - 4.8. Class oil API. GL4 with a viscosity of SAE 80W / 90.
• - The capacity of the automatic transmission - 9.4l. Oil type - Dexron III.
• - Full volume - 1.1l. Fluid type - Dexron III.
• - Approximately 0.7l. Type of recommended brake fluid - original brake fluid Nissan or Dot3 and its equivalents.
• Multi-purpose lubricant - Consumption as needed. Lubricant type: NLGI # 2 on a lithium-based basis.
• - HFC-134A (R-134A).
• - original oil Nissan for air conditioning systems type S or equivalent.
• - 5l. The type of liquid used is water. If necessary with the additives of detergents.

How much oily mourning [Nissan Cefiro A33]? Based on the recommendations of the repair manual and nissan maintenance, it is necessary to pour4 liters Oils with filter replacement, and 3.7 liters without replacing the filter. At the same time, many services pour 4.2 liters, this volume of oil corresponds to the maximum allowed oil level (marksH. On the oil probe).

Recommended viscosity: Viscosity oils Nissan. It recommends choosing based on the climatic conditions of operation of the machine, which is clearly represented in the last figure.

Recommendations for oil producer:

Of course, cars concern Nissan. Recommends the use of oils of its own production. However, the majority modern oils They have sufficiently high quality, based on this, the owner has a large assortment of the owner to the owner: but the oils are still different from their characteristics, for example, some are better cleaned from Nagara, others are lit and quickly disappear, others differ in high adsorption or lower wear by parts of the properties. Considering all this, it is very difficult to advise some kind of determined oil, I personally opted for Nissan Oil .

Given all this, it should be noted that oil still focuses, so buying the oil only in proven places, wholesale bases or large auto stores. In this case, the oil must match the viscosity level of the API SF, SG or SH!

Recommended Manufacturer: Repair and maintenance manual cars Nissan. Recommends strictly observe the level of coolant (antifreeze) and add it if necessary. At the same time, if the topping is required too often, it is necessary to immediately contact the service center for the diagnosis of the cooling system. Use cooling fluid of any manufacturer based ethylene glycola. The use of other types of refrigerant solutions can damage the cooling system !!!

Coka Oil volume (liquid) MCPP [Nissan Cefiro A33]? Never run the engine when checking the oil level. To measure the oil level in the manual transmission, it is first followed first to check the oil leaks from the box or around it. We put the car on a flat surface (on the pit).

Method 1.: Remove the speedometer gear and check that the level L is from the rear side of the car within the normal range. [see Figure 1]

Normal oil level (distance L): 18-25 mm.

Method 2: On the MCP Corps there are two traffic jams. One drain - bottom. The second control / fill with side. Unscrewed bay cork And they are confused to look there or touch your finger, as shown in Figure 2. Ideally, the oil level should be such that with an open tube from-there, slightly smoke oil.

Replacing the oil in the manual transmission: Drain the drain federated oil and fill the new transmission oil. Check the level.

Coka Oil volume (liquid) automatic transmission [Nissan Cefiro A33]? To properly measure the oil level in the automatic transmission, it is necessary to use a special probe (its location is shown in the figure to the right). At the dipstick there are notches that determine the normal oil level for hot or cold measurement. Total in automatic transmission 9.4 liters.

The oil level in the automatic transmission is determined visually with the help of the probe. For oil in automatic transmission, two levels are measured - cold andhot .

Undercold It is understood as the level when the temperature of the oil is ranging from30 ° С to 50 ° С .

Hot 50 ° C to 80 ° С .

For the correct measurement of the oil level in the automatic transmission, the following conditions must be observed:

• the engine must be heated to operating temperature.
• the car before the start of the measure should have been in motion at least 5 minutes (Il 8 - 10 km.)
• oil temperature should be between 50 ° C to 80 ° C

The measurement of the oil level in the automatic transmission is made as follows:

• put the car on a flat surface and install on hand brake
• get the engine and gear selector sequentially spend each position with minor delays, then return the selector to the position in the same way.P.
• do not glow the engine, measure the oil level

* Note: If the car drove a long distance at high speed, or was used in the city in hot weather, or towed a trailer (trailer), then the correct value of the automatic transmission oil level may not be obtained. It is necessary to wait about 30 minutes while the oil temperature falls slightly.

Full inspection oil replacement:The liquid in the box can be changed either to either on a hundred (using a specialized apparatus).

Hardware replacement of automatic liquid automatic transmission: On a hundred, there is the possibility of replacing the oil in the box using a specialized device, this unit allows you to replace little in a box in streaming directly on a working box, which ensures the most full replacement Oil automatic transmission. Right on the working car, the device under pressure pumps through the entire oil box, thereby replacing the oil change in all nodes of the box. When hardware replacement, you should take 3-5 liters of oil more (everything is frightened against the contamination of the old oil). For example, I take 12.13.

Therefore, if you want to be sure that the oil in your automatic transmission is fresh, then you will have to change it several times in a row, every time mixing new, clean, fresh butter with the remaining in the hydrotransformer. Thus, after some number of such substitutions, the percentage of old oil will remain minimal.

Also, the oil change in the box can be carried out either with the removal of the pallet either without.

The first option makes sense to use on machines with big mileage, dubious past or in suspected that the box crankcase ended the box. With this method of replacing the oil, an object of close attention will serve everything that you will see removing the pallet, including an oil automatic transmission filter. If necessary, replace it or clean it.

The fluid level is determined visually on the barrel of GUR (it indicates the maximum and minimum of the fluid level of the GUR) [Watch the drawing to the right].
For measuring fluid GUR exist 2 scales -for cold measurement andfor hot measurement .

Undercold It is understood as the level when the fluid temperature is ranging from0 ° C to 30 ° С .

Hot Level corresponds to fluid temperature from50 ° C to 80 ° С .

Functions oil ATF. In the automatic transmission of Nissan Cephiro:

• effective lubrication of rubbing surfaces and mechanisms;
• reduced mechanical load on nodes;
• heat dissipation;
• removal of microparticles resulting from corrosion or wear of parts.

• wear salts of automatic transmission;
• wear surfaces of shafts, the occurrence of the gap between the shaft and the sealing element;
• wire of the sealing element of the automatic transmission and shaft of the speedometer drive;
• the backlash of the primary shaft automatic transmission;
• damage to the sealing layer in compounds between parts of automatic transmission: pallet, automatic transmission, Carter, clutch housing;
• weakening bolts that provide the compound of the above parts of the automatic transmission;

Due to lack of oil or low-quality oil in the Nissan Cefiro automatic transmission:

• plungers and hydroblock channels are clogged with mechanical particles, which leads to a deficiency of oil in packets and provokes wear of the sleeve, rubbing parts of the pump, etc.;
• overheat and quickly wear out steel discs gearboxes;
• overheat and burn rubberized pistons, stubborn discs, clutch drum, etc.;
• warm and comes into disrete of hydraps.

When choosing an Oil automatic transmission Nissan Cefiro for replacement, it should be guided by a simple principle: it is best to use the oil recommended by Nissan. At the same time instead mineral Oil You can fill a semi-synthetic or synthetic, but in no case cannot be used by the "class below" oil from the prescribed one.

Synthetic oil for the automatic transmission of Nissan Cephiro is called "unreasonable", it is poured for the entire service life of the car. Such oil does not lose its properties under the influence high temperatures And designed for a very long term of use of Nissan Cefiro. But it is impossible to forget about the appearance of a mechanical suspension as a result of the wear of the frictions with a very significant mileage. If the automatic transmission is kept in conditions of lack of oil for some time, it is required to check the degree of contamination and perform a replacement if necessary.

Methods for replacing the oil in the Nissan Cefiro automatic transmission:

• Partial oil replacement in the Nissan Cefiro box;
• Full oil replacement in the Nissan Cephiro box;

The complete replacement of the oil automatic transmission of Nissan Cefiro is performed using the installation to replace the oil in the automatic transmission, Specialists in the car service. In this case, there will be more ATF oil, which accommodates the Nissan Cefiro automatic transmission. For flushing out the one-hour or double volume of fresh ATF. In terms of cost will be more expensive partial replacementYes, and not every car service providing such a service.
Partial ATF oil replacement in the Nissan Cefirro automatic transmission box on a simplified scheme:

1. We unscrew the drain plug, drain the old ATF oil;
2. We unscrew the DCP pallet, which, besides its bolts, processed along the contour of the sealant.
3. We get access to the automatic transmission filter, it is desirable to change it with each oil change, or rinse.
4. At the bottom of the pallet there are magnets that are necessary for collecting metal dust and chips.
5. We clean the magnets and rinse the pallet, wipe dry.
6. We establish the automatic transmission filter into place.
7. We establish the trash of automatic transmission to the place, replacing the laying of the drive of the automatic transmission, if necessary.
8. Tighten the drain plug by replacing the gasket drain plug For automatic transmission.

Changing oil into a box automaton Nissan Maxim A33

How much oily mourning [Nissan Cefiro A33]? For considerations of the Repair and Service of Nissan, you need to pour 4 liters Oils with filter change, and 3.7 liters without filter change. With all this, probably services are pouring 4.5 liters, the myth of the oil volume corresponds to the largest allowed oil level (marks H. On the oil probe).

Taking into account full setIt should be borne in mind that the oils still forgive, therefore it is worth talented by oil, wholesale bases in different ways in a huge auto stores. Here, the oil must correspond to the viscosity level of the API SF, SG or SH!

For work shift Cooling water (antifreeze) required 8.5 Litrov taking into account the reservoir (expansion tank).

Read the same way

Recommended Manufacturer: Nissan repair and maintenance management advises to strictly observe the level of antifreeze (antifreeze) and as need to add it to. With all this, if the tank is required very often, you need to contact the service center for the diagnosis of the cooling accounting system. Use cooling fluid of any manufacturer based on ethylene glycola. The use of other types of refrigerant solutions can damage the cooling system.

The level of antifreeze is made on a cold engine. To measure the level of coolant (antifreeze), take a look at the expansion bar, the level of antifreeze in it should be between the marks MIN. and Max. If the antifreeze level is close to the MIN mark, the cooling fluid should be addressed to the MAX mark. If the antifreeze in the expansion barrel did not turn out, unscrew the radiator cover (remember the engine and the entire cooling system must have the ambient temperature) and estimate the level of antifreeze there (the level of antifreeze should be under the plug). If the coolant (antifreeze) in the radiator is not enough, fill in the radiator to the lid, then fill the reservoir (expansion barrel) to the mark Max.

Coka Oil volume (liquid) MCPP [Nissan Cefiro A33]? Never run the engine when checking the oil level. To measure the oil level in the manual transmission, it is first followed first to check the oil leaks from the box or around it. We put the car on a flat surface (on the pit).

Nissan Maxima A32 3.0 Replacement Filter Oil ACP

Read the same way

Nissan Maxima. In the A32 body with engine 3.0 V6 while the box was removed, I decided replace filter automatic. Remove the pallet as well.

Full (100%) replacement of oil in automatic transmission. 8-908-023-1737

Full change of oil in Automatic. Krasnoyarsk 8-908-023-1737.

Method 1.: Remove the speedometer gear and check that level L. from the back of the car within the normal range. [see Figure 1]

Normal oil level (distance L): 18-25 mm.

Method 2: On the MCP Corps there are two traffic jams. One drain. bottom. The second control / fill with side. We unscrew the filler plug and get out to look there or touch your finger, as shown in Figure 2. Ideally, the oil level should be such that with an open tube from-there slightly smoke oil.

Replacing the oil in the manual transmission: Drain the oil from the drain fitting and fill the new transmission oil. Check the level.

Coka Oil volume (liquid) automatic transmission [Nissan Cefiro A33]? To properly measure the oil level in the automatic transmission, it is necessary to use a special probe (its location is shown in the figure to the right). At the dipstick there are notches that determine the normal oil level for hot or cold measurement. Total in automatic transmission 9.4 liters.

cold and hot.

Under cold It is understood as the level when the temperature of the oil is ranging from 30 ° С to 50 ° С.

Read the same way

Hot Level corresponds to fluid temperature from 50 ° C to 80 ° С.

For the correct measurement of the oil level in the automatic transmission, the following conditions must be observed:

• the engine must be heated to operating temperature.
• the car before the start of the measurement should have been in motion at least 5 minutes (Il 8. 10 km.)
• oil temperature should be between 50 ° C to 80 ° C

• put the car on a flat surface and install on hand brake
• get the engine and gear selector sequentially spend each position with minor delays, then return the selector to the position in the same way. P.
• do not glow the engine, measure the oil level

Full inspection oil replacement: The liquid in the box can be changed either to either on a hundred (using a specialized apparatus).

Hardware replacement of automatic liquid automatic transmission: For a service station, it is possible to replace the oil in the box using a specialized device, this unit allows you to replace little in the box in streaming mode directly on the running box, which ensures the most complete replacement of automatic transmission oil. Right on the working car, the device under pressure pumps through the entire oil box, thereby replacing the oil change in all nodes of the box. When hardware replacement, you should take 3-5 liters of oil more (everything is frightened against the contamination of the old oil). For example, I take 12.13.

Therefore, if you want to be sure that the oil in your automatic transmission is fresh, then you will have to change it several times in a row, every time mixing new, clean, fresh butter with the remaining in the hydrotransformer. Thus, after some number of such substitutions, the percentage of old oil will remain minimal.

Also, the oil change in the box can be carried out either with the removal of the pallet either without.

ATF oil functions in Nissan Maxim automatic transmission:

• effective lubrication of rubbing surfaces and mechanisms;
• reduced mechanical load on nodes;
• heat dissipation;
• removal of microparticles resulting from corrosion or wear of parts.

• wear salts of automatic transmission;
• wear surfaces of shafts, the occurrence of the gap between the shaft and the sealing element;
• wire of the sealing element of the automatic transmission and shaft of the speedometer drive;
• the backlash of the primary shaft automatic transmission;
• damage to the sealing layer in compounds between parts of automatic transmission: pallet, automatic transmission, Carter, clutch housing;
• weakening bolts that provide the compound of the above parts of the automatic transmission;

Due to the lack of oil or low-quality oil in the Nissan Maxima automatic transmission:

• plungers and hydroblock channels are clogged with mechanical particles, which leads to a deficiency of oil in packets and provokes wear of the sleeve, rubbing parts of the pump, etc.;
• overheat and quickly wear steel transmissions;
• overheat and burn rubberized pistons, stubborn discs, clutch drum, etc.;
• warm and comes into disrete of hydraps.

When choosing an oil automatic transmission Nissan Maxima for replacement, it should be guided by a simple principle: it is best to use the oil recommended by Nissan. In this case, instead of mineral oil, it is possible to fill a semi-synthetic or synthetic, but in no case cannot be used by the "class below" oil from the prescribed one.

Synthetic oil for the automatic automatic transmission of Nissan Maxim is called "unreasonable", it is poured for the entire service life of the car. Such oil does not lose its properties under the impact of high temperature and is designed for a very long term of use of Nissan Maxima. But it is impossible to forget about the appearance of a mechanical suspension as a result of the wear of the frictions with a very significant mileage. If the automatic transmission is kept in conditions of lack of oil for some time, it is required to check the degree of contamination and perform a replacement if necessary.

Methods for replacing oil in the automatic transmission of Nissan Maxima:

• Partial oil replacement in the Box of Nissan Maxima;
• Full oil replacement in the Box of the Nissan Maxim;

The complete replacement of the oil automatic transmission of Nissan Maxima is performed using the installation to replace oil into the automatic transmission, Specialists in the car service. In this case, there will be more ATF oil than the Nissan Maxima automatic transmission. For flushing out the one-hour or double volume of fresh ATF. In terms of cost, it will be more expensive than partial replacement, and not every car service provides such a service.
Partial replacement of ATF oil in an Nissan Maxima automatic transmission box on a simplified scheme:

1. We unscrew the drain plug, drain the old ATF oil;
2. We unscrew the DCP pallet, which, besides its bolts, processed along the contour of the sealant.
3. We get access to the automatic transmission filter, it is desirable to change it with each oil change, or rinse.
4. At the bottom of the pallet there are magnets that are necessary for collecting metal dust and chips.
5. We clean the magnets and rinse the pallet, wipe dry.
6. We establish the automatic transmission filter into place.
7. We establish the trash of automatic transmission to the place, replacing the laying of the drive of the automatic transmission, if necessary.
8. Tighten the drain plug by replacing the drain plug gasket for automatic transmission.

Oil in automatic transmission is working fluid. Its condition is important not only for the operation of the units of the box, but also the engine, and the entire car as a whole. Replacing the oil in the automatic transmission of Nissan Maxim A33 is complete or partial. Partial, implies a drop of oil naturally through a rejected pallet plug (sometimes you need to remove the entire pallet of the crankcase depends on the auto model). In this case, 30-40% of oil changes, the rest remains in the box mechanisms.

It changes during regular service. Full, produced on special equipment in a hundred. At the same time, the installation hose is connected to the cooling radiator and everything is squeezed under pressure. The frequency recommended by the manufacturer is 15-20 thousand km for partial and 50-60 thousand km for full. But these dates are strongly dependent on the operating conditions of the car.

Cost:

Where to change in St. Petersburg:

With elevated loads, an aggressive ride manner, a car operation in extreme conditions, if the car stands in traffic jams every day, it is recommended to fully replace the oil every 25 thousand km. With a complete replacement to one hundred services of St. Petersburg check the condition automatic box According to the stigs in working out.

Also washed the pallet, clean the reusable filters, change the crankcase pallet laying. Disposable filters replace. The cost depends on the type of work, the brand of the car, whether the parts are bought by the client in the service or came with his own, etc.

It is important to monitor the level. With its insufficient amount and during excessive, the subsequent repair of the machine is provided. The level is checked with a special probe or sensor. In addition, you need to still follow its cleanliness - dirty oil is darker source due to suspension particles in it.

Transmission fluids differ in their characteristics. It is very important that the brand corresponds to and the recommended manufacturer. Mixing is also not allowed different types liquids. For example, you bought a used car, then it is better to make a complete replacement in our service.