Best Oil Club Engine Oil. Rating of motor oils by sales number in Russia. Best Mineral Motor Oil

the main / Repair and care

Today we will take a little from the usual structure of such ratings - "Best mineral / semi-synthetic / synthetic oil". The reason is simple: a specifically taken engine primarily requires an oil viscosity by the manufacturer, and modern engines use low-grade lubricants (this is usually high-temperature viscosity 30, on many motors - 20). Discuss in this context something except synthetic, stupid. The separation of "gasoline oil is no less strange. diesel engines"Taking into account the fact that 90% modern oils Have tolerances for use in both types of engines, discuss purely "diesel" oil in relation to passenger cars it makes sense only in the segment of oils intended for motors with particulate filters.

Therefore, we divide the engine oils today by categories of their specific application, and not by virtual and not practical parameters:

Oil with high temperature viscosity 40 (5W40 in our ranking) - the best way For engines produced in the 90s - the beginning of the 2000s. For the regions of the Far North, it makes sense to consider 0W40 oils, it can noticeably facilitate the launch of the motor in the winter.
5 W30. To date, it can be considered universal: this viscosity is also used in budget foreign cars, and in premium car engines.
0 W20. - low-grade engine oils applied in a large number of modern engines. And to pour more viscous oils in them categorically not recommended: piston ringsSpecially having reduced elasticity to reduce mechanical losses, do not cope with a stronger oil film, butter fuses growth.
High temperature viscosity 50. Relevant for owners, rigidly operating their cars - no wonder oil 5W50, 10W60 got the name of "sports" in everyday life.
10w40 -the standard choice of older owners is usually the budget semi-synthetic of outdated quality classes - SH, SJ.
Diesel with the particulate filters Must have a minimum inchar oil, which does not have a noticeable solid precipitate (low solitude). This parameter is critical, so only oils having appropriate certification are allowed into the motors of such cars. The overwhelming majority of passenger diesel engines use oils with a viscosity of 5W30, and we will consider them.

Motor oil is one of the essential elements of the car engine. It is used to lubricate pistons or rotors in the motor internal combustion, not allowing overheating. Due to the added active additive, the stability of the lubricated surfaces to the occurrence of corrosion processes increases, besides, the oil itself will not thicken or freeze. One of the main criteria when choosing an engine oil is its type:

Mineral - is not widely widespread, mainly used in engines that have been released enough long ago. It has a low viscosity index, which is why the launch of the motor into a strong frost can be difficult;
A semi-synthetic - has a higher viscosity index compared to mineral products. It is much more expensive. This type of oil has absorbed the main advantages of mineral and synthetic compositions, with its help the friction coefficient in the engine decreases by about 5%. This oil can be used at high and extremely low temperatures, for a long time to maintain its performance;
Synthetic - can have different performance depending on which additives have been added to the composition in production. It practically does not evaporate, provides low friction, well shows itself at high and low temperatures. The only disadvantage compared to semi-synthetic products is a very high price.

When drawing up a rating of the best motor oils, we took into account many factors: operating opportunities, price, consumer reviews. Here are the compositions, ideal from the point of view of the price-quality.

10 +. Zic XQ LS 5W-30 4 l

This is a completely synthetic composition of very high quality. In the production process, the most modern Low SAPS technology was used, which provides low sulfur content, ash and phosphorus. It can be used in gasoline and diesel engines equipped with a turbocharging system.

All-season oil is well used even in the most extreme temperature conditions. It prolongs the service life of the motor, various types of filters aimed at reducing emission harmful substances Environment. In the engine itself, in the process of work, the Nagar and all sorts of deposit will almost not occur. The oil is permissible to use in engines corresponding to the EURO-IV standard, where much attention is paid to the number of emissions into the atmosphere.

Benefits:

Low price;
For a long time, it retains its operational qualities;
It keeps a high and low temperature well.

Disadvantages:

In the engine with this oil you need to pour only the highest quality gasoline;
It can be found far from the store, often come across fake formulations.

This is a synthetic oil that can be used at ambient temperature to -25 degrees, since when starting the engine, the oil pump must quickly deliver the composition to a whole driving element of the mechanism. If this does not occur, the friction and wear indicators increase. In the summer, the oil retains its qualities at a temperature of up to +50 degrees, due to which the motor does not join with a long simple, for example, in a traffic jam, or with incorrect cooling system.

This composition is intended for use in the vehicles of most domestic and foreign grades, even if it was filled not at all quality gasoline. The cost of oil is quite high, but its consumption is significantly less compared to other compositions, it will not have to pour it too often. With the help of such an oil, it is possible to achieve a certain fuel economy, it extends the service life of various filters - oil and air. While working in oil does not occur air bubbles or foam. The manufacturer allows the use of the composition as a hydraulic fluid.

Benefits:

Not too viscous liquid;
Excellent cleans the engine from various kinds of contaminants.

Disadvantages:

Some engines are the cause of strong vibration;
You need to change every 7500 km.
There are a lot of fake compositions on the market.

It is produced on the basis of active detergent technology, due to which the motor will be quickly cleaned from any contamination, including traces of corrosion. The engine with this oil begins to work more stable, ceases to "sneeze", noise is much quieter. The composition is very economical, the consumption is minimal. IN winter The car starts quickly.

It darkens much more slowly compared to other oils. It resists well with so-called shift loads, supporting the level of viscosity at an acceptable level during the entire service life. Such oil is perfect for gasoline or diesel engines, if the latter is not provided dairy filter. According to the stated manufacturer characteristics, the engine with this oil is protected by about 30% better.

Benefits:

Well suited for any engines;
Low flow during operation;
Acceptable cost;
High quality;
Wide temperature range.

Disadvantages:

There are additives as part of the additives, which after a while begin to issue a voligator;
Low protection against wear;
In old engines, quite a big consumption.

This is the newest composition with a low content of sulfate ash, phosphorus and sulfur. It can be used for most engines of foreign and domestic manufacturers. With the help of it, it is possible to ensure high fuel savings, as well as optimize the functioning of all systems that are responsible for the amount of emissions of harmful substances into the atmosphere.

The composition is perfect for gasoline and diesel engines, however, in the first case, it is desirable to explore the manual for operation. vehicle. The oil is perfectly used in fairly difficult conditions, is the all-season fluid. It supports the engine performance well, extends the life of the particulate filters, not allowing them to be clogged ahead of time.

Metal additives minimum compared to other similar means. On average, during operation, it is possible to save about 3.5% fuel. The composition contains washing additives that do not allow in the engine of various sediments in the engine.

Benefits:

Retains good fluidity in severe frosts;
The engine works comfortably - not knocking, does not sneeze;
Additionally, purifies the motor from corrosion and other deposits.

Disadvantages:

Protection against fakes is not provided;
It is not very often on sale;
High price.

This is all-season composition designed specifically for Russian climatic conditions. Oil created by modern technology, can be used in cargo and passenger cars, including those engines where the filters of the particulate particles are located.

In oil, it practically does not contain ash, which prolongs the service life of the filter. It has detergent additives that not only clean the engine, but also provide more quiet operation of the engine. The exhaust oil is light and practically no sediment.

Benefits:

Allows you to easily run the engine even at extremely low temperatures;
It has high anti-corrosion and actioxidative qualities;
Well protect the engine from wear and in urban environments and on the highway, and even in conditions dirt road or full off-road;
The composition is well combined with finishing systems installed in the car. exhaust gases;
Differs in low consumption.

Disadvantages:

High price;
Needs a frequent replacement;
Fake compounds are often found.

This synthetic means becomes an excellent replacement of mineral oil in fairly old engines. It contains unique cleaning additives capable of restoring the normal performance of the motor, to remove slag, soot and chog. Thanks to these additives this oil Excellent withstand low temperatures. It minimizes the negative impact on the engine of poor-quality fuel, almost does not evaporate, it can easily withstand overload and extreme conditions.

Such oil is well suited for passenger carsequipped with a gasoline or diesel engine, it can also be used in motor, American and japanese marks. The composition is withstanding up to -35 degrees of frost. When used in old cars, you should be as cautious as possible - this composition can start too much to clean the engine, as a result of which the Nagar will quickly break all filters and valves and lead to the need to replace them.

Benefits:

Oil quickly lubricates all elements of the engine;
Throughout the period of operation will keep the necessary viscosity;
It eliminates all pollution;
In the period from replacement before replacement, it rarely requires the topping;
Saves fuel;
Well withstands low and high temperatures.

Disadvantages:

High cost is the most expensive composition in the entire rating of the best engine oils.

The only mineral oil presented in this rating. We decided to put it on such a high place due to the high performance characteristics - This agent is well suited for highly used cars and for machines with medium mileage, especially if they are used in extreme conditions.

In the process of oil production, the highest quality components with excellent protective indicators were used. It also contains additives and a special lubricant material - Molybdenum disulfide, which allows to provide high performance even in case of critical loads.

Benefits:

Perfectly protects all moving parts of the motor from rapid wear;
Oil in sufficient volume comes to all necessary elements;
Has high cleansing qualities;
It can be used in the designs of motors equipped with turbines, catalysts and compressors.

Disadvantages:

In motors with mileage less than 100 thousand to use forbidden;
It is forbidden to use with other oils.

This synthetic composition is best suited for quite low temperatures. The oil is made on the basis of the modern Titanium FST technology, which allows the oil film additional strength due to the presence of titanium additives in it. Such a production technique forms an additional shock absorbing layer.

The oil is allowed to use in engines operating on gasoline or diesel fuel.

Benefits:

Provides high efficiency of the motor operation for a long period of service;
Does not allow deposits;
Increases the response of the engine when pressed on the gas pedal;
Due to this oil, the motor can work for quite a long time under conditions of limit loads;
Increases coefficient useful action any motor;
Well operates in a wide temperature range.

Disadvantages:

In motors with mileage more than 200 thousand kilometers poorly removes Nagar;
When buying an unauthorized dealer, you can run into a fake.

This is a completely synthetic energy-saving oil, which is created specifically for modern cars that meet the key international security requirements, in particular, EURO 4. It minimizes the total volume of exhaust uniforms, it reliably lubricates all moving elements, it allows to significantly reduce the fuel consumption ( When heating is approximately 8-10%, and during the movement up to 5%). This composition is well combined with any type of fuel - natural or liquefied gas, gasoline, diesel, biodiesel, etc.

Before the direct acquisition should be carefully examined by the car operation manual, as there may be a ban on use. There is no sulfate asset in the additive, due to which fuel and air filters are quickly clogged.

Benefits:

Very high quality;
The oil is able to withstand and high, and sufficiently low temperatures;
The manufacturer declares compatibility with any kind of fuel;
Highest lubricating characteristics.

Disadvantages:

The oil is suitable far from all motors.

It is manufactured on the basis of modern PURE PLUS and Active Cleansing. This allows you to quickly and efficiently clean the engine from various contaminants, without cloging the filters. As a result, it is possible to achieve a wonderful effect - the motor remains as clean as immediately after the assembly. All moving elements are reliably protected from aging and wear, which makes the service life of the engine quite long.

The viscosity indicator remains on the same level on the entire range of the stated temperatures. The car with such oil is started instantly, due to which it becomes more economical - less consumes both fuel and oil itself. The composition is much more efficient than everyone else synthetic oilsPresented in this ranking, even in the most severe conditions, it will well maintain its cleansing qualities.

Benefits:

Extension of the engine operation period;
Protects the motor from corrosion and wear;
Can be used even in extreme conditions;
Significant fuel economy;
Does not require a top of the replacement;
It can be used in any engines;
Large temperature range;
Easily allows you to start the motor at low temperatures;
Well protects the engine from oxidation.

Disadvantages:

Not detected.

1. Polymerium / Polymerium XPRO1

The winner of most amateur and professional tests on the quality of oil is polymerium: evaporation, freezing, friction. Fully synthetic with the addition of eterial base oils and a powerful Afton / InfineUM (England) additive package. Suitable for any engines and temperature modes. There are two types of XPRO1 (cheaper) and XPRO2 RACE (more expensive). Differences in the number of estrices, PJSC and additive package.

According to the numerous reviews of Polymerium oil, they do not focus, the engine works significantly quieter, many cases with a decrease in fuel consumption, excellent detergents. Oil professionals and repairmen recommend this oil as one of the best in European, Asian and American cars, the improvement of work and domestic brands is also noted.

Benefits:

The best price for such a composition;
Suitable for any engines;
Does not dump;
Good detergents;
Powerful anti-wear and protective additive package;
Base on synthetics with Estera;
No fakes. Protection against fakes through disposable codes;
According to the results of independent tests: the best motor oil in the world.

Disadvantages:

Not found.

In conclusion video

The engine of the car is one of the peaks of human creation. Each element interacts with other details, allowing the engine to transfer all the power of its horse power. This article will tell you about the rating of motor oils, without which the vehicle motor would quickly become unusable.

For protection and reliable the work of the DVS Machines were developed special oils. Car oil must be poured into the engine, which will ensure its protection against driving parts. There are quite a lot of car on the market, each of which has its own distinctive features. All oils are divided into several species, such as synthetic or mineral.

Landmarks for choice

What is the best? To answer this question, you need to take into account not only the rating of top manufacturers, but also the features of the engine of the machine in which the machine will be used. When choosing, pay attention to specific features:

Each car manufacturer applies its constructive features When creating the engine. This suggests that the engine oil must take into account the nuances of the motor.
Oils have a classification by viscosity indicator, changing which can weather conditions, for example, ambient temperature.
Engine oil also need to be selected with the operating conditions of the car.

So what oil is better to pour? Which brand? We have prepared for you our rating of motor oils.

American Exxon Mobil is headed by top companies for the extraction and refining of oil. It is this brand first in the world began to produce synthetic oils for gasoline engines. And for a long time, the company confidently keeps in the top 10 manufacturers of cars.

The products of this brand correspond to the ACEA A3 / A4 estimate and the SN / SM API. This suggests that such products complies with the requirements of American and European quality standards. The oil is approved and allowed for use in modern gasoline engines. In addition to the availability of high indicators, this products are approved and recommended for use among the best automakers, including Mercedes, BMW, Porsche, Volkswagen, Peugeot, Citroen, and even our domestic AvtoVAZ.

Material has a small fourth, as well as moderate indicators in the level of iron in the exhaust composition. The oil is best suited for regular lovers. It is necessary to change it about every 10 thousand car runs. You can pour into the majority of European and American gasoline engines. In addition, the price within two thousand rubles is another dignity of this brand.

Shell Helix Ultra 5W-40

Oil from the European manufacturer in our top oils in second place. Products have no special qualitative differences from the previous brand, but has recommendations from more automobile companies. Mercedes recommends using this brand in its new gasoline engines with a diesel filter.

In addition, Shell Helix is \u200b\u200bapproved by premium manufacturer Ferrari. By the way, two companies have been cooperating for a long time, and Shell constantly performs on all races as the main sponsor.

Special testing was not made, but products are in great demand. When choosing the main thing - to buy original productsbecause it is most often faked.

Shell Helix Ultra ECT 5W-30

The next position in our top oil for gasoline engines is covered by the products of all the same company Shell. Distinctive trait This product is reduced viscosity. Shell Helix Ultra has an ACEA C3 specification, which allows it to be used in engines with a catalytic system neutralization of exhaust gases. Synthetic approved by Mercedes, Chrysler, BVM and GM. This product is the best solution for European and Asian cars, since the features of their power units require low viscosity oil.

Mobil 1 ESP Formula 5W-30

The synthetics of this manufacturer has more serious characteristics. For example, specification ACEA. C2 suggests that the use of this automation allows you to save up to 2.5% of gasoline. The product has approval among VW, Porsche and Peugeot.

The price of this product fluctuates within three thousand rubles, which is slightly higher than the oils presented above in our top. Mobil 1 is suitable for different enginesSo only you decide which oil is better.

The manufacturer is known as the sales leader in foreign online stores. The presented oil in our top has the same tolerances as the product from the company Shell. On the label, all properties and product specifications are indicated, where there is not a single advertising word or invented phrases.

Synthetic has a GM-Opel specification. Mercedes is also approved for the latest motors modifications (with the exception of power units with SLR and DPF systems). This option is one of best offers On the market. Foreign Product Product; For 5 liters will have to give about 3 thousand.

Castrol Magnatec 5W-40 A3 / A4

Automotive oil is quite good quality. It has medium characteristics, so it is not recommended for lovers to pour oil through a fairly long run period. The product is approved by manufacturers such as Mercedes, Renault, BMW and WV. MB noted the specification of this product at the middle level. According to the results of the tests of the company, the composition does not have distinctive resistance, and its viscosity over time is rather quickly reduced.

Of course, this product is better than some other brands, but can not boast of special advantages and qualities. And when buying this brand, remember - the goods are actively advertised, which indicates that 30% of its prices are promotional costs. average price On this products in Russia - within 2.5 thousand rubles.

ZiC XQ from the Korean manufacturer does not have a large number of specifications and approval among auto hydriants, but it can boast the availability of standards from Mercedes and Porsche. According to these companies, this product has excellent stability and low ugara. In addition, the oil has a large margin of quality, which allows you to pour it through sufficiently long distance distances.

If your machine does not have special requirements for the catalyst - then Korean oil at its price of 1750 rubles is the best solution.

Total Quartz 9000.

Total quartz is a product of a French company, and the specification is very similar to the leader of our list. This brand boasts approval from Mercedes, Peugeot, BMW and Porsche.

This product does not have features in quality, but for the cost of 2300 rubles for five-liter capacity - one of the best solutions. Pulling oil usual - 1 liter for every 10,000 kilometers of the mileage of your car.

CASTROL SLX PROFESSIONAL 5W-30

The composition has the standards of the API SN and ACEA C3, which indicates the low content of elements poisoning catalysts. The presence of approval by the BMW allows you to use the Castrol professional in the newest engines with the SAZHE filtering system. The standard from Mercedes says that it is possible to replace the oil after every 13 thousand run.

Almost all car fund owners ask themselves and sellers of specialized stores. The same question: "What kind of engine oil is better to choose for my car?" After all, there are products of dozens of manufacturers in the shelves - both little-known and famous, who know all over the world. The question is of course not easy.

If the nomenclature of basic compositions of oils is relatively small, then additive packages are diverse. Manufacturers of motor oils try to select unique additive packages for each product. It is they who create the engine oil that will perform all the functions that provide it for a long service.

It is impossible to make a real rating of the best motor oils. The reason is a huge number of offers in the market. In addition, characteristics and specifications written in labels will never tell you what exactly is the best engine oil for your car. To know exactly what brand oil is better to pour into the engine, you need at least information about its baseline. And such data reveal not all manufacturers.

This is a bright example - oil for the car, the basis of which is obtained using catalytic hydrocracking technology. Some manufacturers are positioning it as synthetic oil, others - as semi-synthetic. At the same time, those and others are right. These are purely marketing moves intended for increasing sales. Hydrocracking is a separate type of basic compositions approaching in quality, as well as properties, to synthetics. But these basic engine oils made of oil are obtained. In fact, thanks to adding additives, it turns out good oil. It is cheaper than synthetics, and in its indicators a slightly inferior to it.

Best synthetic oils

The best engine oil, which is required to use in new engines with a mileage of less than 100 thousand km, has an inscription Full Synthetic on the label. This is quite expensive engine oil, the basis of which consists of a synthesized synthetic composition. It is obtained from natural gas and lung fractions of hydrocarbons contained in oil. They are isolated on oil refining factories, separating oil by distillation on light and heavy fractions. Synthetic compositions are divided into:

polyalphaolefin;
polyorganosiloxane;
hydrocarbon;
essential;
Ester.

There are also other, few common synthetic bases of the machine. Synthetic basic oils Have a high viscosity index value - from 150 to 170 units. They thicken at very low temperatures, from -45 ° C and below. This facilitates the launch of cold engines. For those car oils Inherent adhering to viscosity throughout the temperature range - from a strong frost to + 300 ° C, the characteristic temperature in the cylindropional group of the motor. They do not lose their viscosity characteristics even with overheating of the power unit. This is the most valuable product for the safety of the engine. What is the best oil compositions in the world?

Mobil Super 3000 x1 5W-40

EXsonMobil Corporation is the world's largest enterprise, processing oil and producing auto-chemical products, including, according to Russian motorists, the best engine oils. The company first in the world began to produce high-quality oil on a synthetic basis.

According to API specifications, this lubricant has a SN / SM level for petrol engines. Lubrication can also be used in diesel engines that use API CF oil levels. The level of oil fluid quality has been proven by a large number of tolerances that have been given automakers for their machines. The list of these enterprises is presented below:

Impressive, isn't it? Lubrication refers to category LOW SAPS - this means that the composition has a low content of sulphate ash, phosphorus and sulfur, ensuring the effectiveness of the cleaning systems of the exhaust gases Euro-4 and Euro-5. Lubricant is designed for use in modern engines Both types - both gasoline and diesel, not havingatic filters. Also in turbocharged motors with direct fuel injection systems. Oil protects well in cases of conventional operating modes, as well as when driving with highly loaded conditions.

Top sales of this oil composition came to 2015 and 2016. It is motor oil by rating most popular among Russians. Oil fluid has a thinning temperature of 39 ° C. Recently, the appearance of product fakes in the Russian market has become frequent. Therefore, it is better to acquire it in large, proven, specialized stores selling auto-chemicals.