Chevrolet Lacetti - replacement of oil in mechanical and automatic gearboxes. What oil to fill in the mechanical transmission gear Chevrolet lacetti how to check the oil in the lacetti box

the main / Advice

Checking the state of the transmission of the Chevrolet Lacetti car is carried out after 15 thousand km of mileage or once a year. If necessary, check is accompanied by cleaning, repair and plot technical fluids. In the car Chevrolet Lacetti, the oil change in the gearbox is not provided by the manufacturer. However, the need for maintenance occurs when switching to another class of viscosity, overhaul, long-term operation. In the presence of required tools And the minimum experience, the oil replacement in the MCPP Lacetti can be performed at home.

Procedure for replacing transmission oil

Replacing the oil in the PPC Chevrolet Lacetti procedure is not complicated, but requires strict implementation of the actions algorithm.

Warm gear transmission fluid to standard operating temperature - About 70 - 80 ° C. To do this, it is enough to drive a few kilometers or give the engine to work on idling 10 - 15 minutes.
Install the car on a flat horizontal platform, best use observation pit, Overpass or lift. Turn the car at the parking brake, we substitute the stops under the wheels.
We unscrew the cork of the fuel and control opening for better atmospheric pressure. This will help the exhaust fluid easier to flow from the checkp. The plugging of the filling neck performs the function of the Sapuna. Therefore, for back assembly You need to clean its channels.

Note. The control plug is sealed with rubber gasket. The sold, hardened and overthrown gasket replace the new one.

Down in the presence of protection, it is removed to provide access to the pallet. Hands on "13" weaken the mounting bolts of the pallet. For it we substitute, an empty container for collecting waste fluid. We use the pallet screwdriver, the oil will begin to merge.
After the bulk of the oil is solved, you can completely unscrew and remove the pallet for cleaning from the old gasket, sealant.

Note. The pallet laying must be changed with each removal of the bottom cover. Buying a new gasket need to take into account the number of fastening bolts of the crankcase cover. There are pallets for 10 and 11 bolts, depends on the year of the car.

We establish the bottom cover in place and pour new oil. On lacetti oil in the manual transmission can be poured in two ways: through the control hole with the help of an oil supercharger or through bay cork - Like with a long funnel. When the oil begins to flow from the control opening, wrap the control and filler plugs.

After successfully implementing the provided operations, you need to start the engine and inspect the pallet for leaking. On this, the replacement of oil transmission of Lacetti is completed, it remains periodically to check its level according to the Rules service car.

Checking the oil level

During the operation of the machine, periodically (once every 15000 km) must be checked transmission fluid. Since the probe is not provided in the design of the node, the control of the lubrication level in the PPC Lacetti is performed using the control opening.

To perform work requires a certain algorithm of actions.

Set vehicle on a flat horizontal surface.
Head to "13" to unscrew the bolt of the hole for controlling the lubrication level. This bolt is with right side Carter along the car in the area of \u200b\u200bshrusov.
At a normal level, the lubricant will have an opening edge or in its lower edge.

If the level of lubricating fluid fails to track - a tap is necessary. Pouring oil into the gearbox lacetta is necessary as they did when replacing it.

Important. Top need oil with the same technical characteristicsAs oil in the gearbox.

Cars Chevrolet Lacetti. Completed with 4-range or 5-speed mechanics. For each type of transmission, the manufacturer's plant provides a specific brand and the volume of the oilfilled oil.

Choosing a transmission fluid to consider the following basic principles:

SAE Specification - determines the thermal oil stability. Temperature-viscous oil quality depends on the ambient temperature. SAE indicator determines in which temperature range You can use the composition, for the efficient operation of the node.
· API tolerances - a detailed recommendation for the application of products to the transmission of a certain type and transmission mechanism.
The type of lubricant material is mineral water, semi-synthetic, synthetics.

To replace oil in the MCPP Chevrolet Lacetti, the following masses are suitable:

Mobil 3309. It is used in automatic transmissions with controlled slip blocking. Supports the purity of the MCPP at the level of the factory state.
ISU Dexron III. Suitable for most automatic transmissions Chevrolet Lacetti with servo drive and anti-slip blocking. Complies and exceeds the latest requirements of the world's leading manufacturers of GM dexron.
Castrol Manual EP SAE 80W-90. based mineral oils Purified by the method of catalytic hydrocracking.
Mobil ATF LT 71141. Semi-synthetic ATF product for a robotic, automatic transmission. Optimal frictional fluid properties provide smooth speed switching.

Periodicity of oil replacement

Replacing the oil in the Lacetti box is not provided by the manufacturer. This means that the transmission fluid is filled for the entire period of the car. But manufacturers do not specify that the service life of the vehicle is relative and amounts to 150 thousand km or 5 years of operation (the period before overhaul). Therefore, Chevrolet Lacetti is certainly necessary, preferably without waiting for repair.

Transmission frequency depends on the following factors:

Quality lubricant. For original products Mounted service life within 100 - 150 thousand km. When using cheaper analogues, the replacement must be carried out at 75 thousand kilometers.
Operating mode. Aggressive driving style, increased load, riding in "Start-stop" mode leads to premature oxidation and concentration of transmission oil.
Climatic features of the region. Consistent temperature differences, harsh climatic conditions, increased humidity significantly reduce oil life.

Properly chosen transmission fluid contributes to increasing the efficiency of the gearbox, a decrease in fuel consumption, provides smooth speed.

When to change

According to the application of the manufacturer's plants, the replacement of oil in the PPC Chevrolet Lacetti is completely optional, since lubricants in it, allegedly, is flooded for the entire service life. Here are just Russian realities dictate completely different conditions. First, many motorists converge in the opinion that the replacement of the transmission fluid in the PPC Lacetti should be made approximately every 60-70 thousand kilometers, and it is also desirable that the replacement of lubrication is carried out seasonally, with a knitting on a more liquid and vice versa. Despite the fact that the box in Chevrolet Lacetti is quite reliable, the new oil is much better than the old one and the next replacement does not promise anything bad, only good: smooth gear shift and longer box.

Independent replacement of transmission fluid in PPC Chevrolet Lacetti, which is needed:

First you need to buy a transmission fluid. Selection of oil viscosity depends on the time of year, and the manufacturer from financial capabilities. Chevrolet Lacetti is a fairly common car, so in any store where sold automotive oilsYou will be prompted with the choice and some options will be offered. You only need to say a consultant from which metal you have synchronizers in the checkpoint.
Gasket pallet box. Please note that the pallets of the PPC Chevrolet Lacetti have two types: 10 and 11 bolts, gaskets, naturally, they are also different. Skece down the car and determine which machine you need.
Set of keys and heads.
Bucket or pelvis for draining waste fluid from the box.
Rag for cleaning the tray pallet.
It is also desirable to purchase a sealant.
Syringe for pouring oil. Without it, the lubricant replacement in the box will be much less comfortable.

Replacing the oil in the PPC Chevrolet Lacetti with their own hands. Step-by-step instruction:

Replacing the lubricant in the box will occur much better if it is warm, so it should be warm up to start a car, passing about 10-15 kilometers on it.
We visit the pit or raise your Chevrolet Lacetti on the lift.
We descend under the car and put the gearbox under the tray, then unscrew it slightly, but not completely so that the oil is fastened, and everything will not come out at once.
After all the oil merged, it is necessary to completely unscrew and remove the pallet of the box. Be careful, there are still a little oil.
Clean the pallet of the box from dirt and old lubrication.
Remove the control bolt (it is with a magnetic tip) and believes a metal chips from it.
Now install a new gasket (it is desirable to put it on the sealant) and screw the tray tray back.
Get out of the pit and look under the hood of your Chevrolet Lacetti.
It is necessary to find a breather and remove the plastic lid from it (it takes up)
Remove the Sapuna nut.
Now in the resulting hole we begin to slowly pour the oil, using a syringe. It is necessary to pour it slowly to hear the sound of the flowing oil from the control opening and stop.
When the oil is flooded, it is necessary to spin the breather, put on the plastic cap (do not be used on it with a hammer, you can split).
Now I go down again under your chevrolet and tighten the control bolt with a magnetic tip. Tighten the rest of the pallet bolts and make sure that the oil does not flow anywhere.

That's all. Independent replacement The transmission fluid in the PPC Chevrolet Lacetti is over. As you can see anything complicated if the replacement of the lubricant will be made on time, the box will last you for a long time.

Video on the topic

Chevrolet Lacetta is a compact class car, designed and serially produced by the South Korean GM Daewoo concern and having sedan options, hatchback and wagon.
The car has very good consumer qualities and got widespread in our country.

Chevrolet Lachetti is equipped with automatic or mechanical gearbox, Oil replacement rules for which have certain differences of non-attribusive plan.

Features of the manual gearbox

Depending on the modification of the MCPP, the liquid may be poured for the entire service life or changes after a run of 60-80 thousand kilometers. Among the car enthusiasts, the opinion was common about the need to replace twice per year, that is, to pour into the box a frost-resistant version of this fluid in the fall until the onset of cold weather.

Because of great distribution unattended option MCPP is difficult to find data on the recommended manufacturer type. Usually for replacement uses oil 75W-90. Its good consumer qualities are proven by experienced.

Car Transmission Maintenance: Filling and Lubricant Drain

Preparatory operations

Preparation of Lacetti to replace the PPC liquid is not much of great difficulty, does not require any special skills, as well as the use of a special tool and reduces to the following provisions:

Replacement algorithm

Replacement is performed as follows:

The key rules for updating the transmission fluid

Features of the automatic gearbox

The transmission oil for Chevrolet Lacetti automatic transmission is designed for about 80 thousand kilometers of the car.

An unscheduled replacement is carried out in cases where:

when switching gear, jerk arise or an extraneous unpleasant noise appears;
the level dropped to the lower allowed mark;
the emergence of pollution (the oil filter resource is consumed);
there is an unpleasant specific smell of the box (wear of friction linings);
the liquid acquired a dairy or black color (water and wear of friction linings, respectively).

The level of fluid in the automatic transmission will be checked by a dipstick when he has heightened the car and install the box to "P".

Replacing oil in automatic transmission requires a flow rate of 5 liters of this fluid. Its type is set by the instruction manual for the car. Overflow is extremely undesirable, since sharply increases the wear rate of the box.

Replacement process

Preparatory operations for automatic transmission are similar to machines with manual transmission, as well as the replacement procedure itself are made practically in a similar scheme. These include the following main steps:

Partial replacement (topping)

A feature of the vehicle type in question is that along with the complete replacement described above, the so-called partial replacement is also provided for its automatic transmission. When performing such a procedure, the pallet disassembly is not performed. For partial replacement Oil I. liquid ATF. Add to box to the desired level through the filler plug.

And a little about the secrets of the author

My life is not only connected with the car, namely repair and maintenance. But also I have a hobby like all men. My hobby is fishing.

I started a personal blog in which I share my experience. Many things try, various methods and methods for increasing the catch. If interested, you can read. Nothing superfluous, only my personal experience.

ATTENTION, only today!

IN this photo The report is shown in detail how to replace oil in a manual transmission to chevrolet car Lacetti. In Lacetti, it is indicated to check the oil in the checkpoint every 30,000 km of the mileage.

The replacement process is not particularly difficult, able to cope with people without special professional skills. The oil change in the box refers to seasonal events, most often it is carried out in autumn, the usual oil is changed to the frost-resistant. In our edges, low temperatures - the norm, so you need to be prepared.

You will need:

Laying the pallet cover (Before buying, make sure your cover is 10-bolt, since there are 11-bolted, therefore the gasket may not approach);
The key to "13".
Empty packaging for spent oil.
Sealant (not necessarily).

Before you start, warm the engine to the operating temperature, so the oil will become more liquid and faster.

First of all, it is necessary to find a pit or lift, all work will be done under the car.

Near the pallet you will find the cap. It must be removed by pulling up, after which you will be available to Sapun.

The breather is tightened with turnkey nuts on "17" and "15", which are connected by welding, your task to unscrew the sapuane tube.

Now the most unpleasant and dirty work begins - draining dirty oil from the pallet. To do this, unscrew 10 nuts of the pallet key to "13", but before that do not forget to substitute the bucket or trough under the pallet cover.

There are enough bolts, after that they are quite easily unscrewed by hand.

After the oil stalks, unscrew the bolts to the end and remove the pallet cover. Remove the gasket, it most often sticks to the pallet or lid. If you do not have a new one, then when removing, be extremely neat so as not to break it.

Remove the level control bolt with a magnetic tip. On it, as a rule, small metal particles are harvested, so they are best removed. In addition, when the control bolt is unscrewed, we can control overflow.

Oil fused, the cover is unscrewed, you can now install a new gasket in place and fasten the lid. This is not my first oil replacement in chevrolet box Lacetti, so considering my previous experiments and the quality of the gaskets, for reliability I always soak the gasket on the sealant. Cork for controlling the oil level Do not twist if you do not know how much butter needs to be poured. Leyte slowly when it is dropped from below through the "control" - this will mean enough.

You can pour oil into the box using a tube that is available in each canister, but it is not entirely convenient, so it was decided to replace the oil in the checkpoint using a large plastic syringe. The syringe minimizes the loss and also saves time. Sheet slowly, in order to hear how the oil flows on time and stop pouring it into the box.

Tighten the magnetic tip bolt, and pull the remaining 10 pallet bolts. Make sure that nothing else happens.

Today we will talk about oil, or rather about his replacement. I will tell you about how to replace the oil in the gearbox on Chevrolet Lacetti with your own hands. If you are interested, then read on ...

4. Submold the container under the drain hole and drain the old transmission oil, then the key to "13" unscrew the oil control tube, as I said, it is located on the right next to the mounting of the semi-axis with the checkpoint.

5. Drain the oil, then unscrew the pallet lid, which is attached to 10 bolts turnkey on "13".

Attention: When unscrewed the lid, be extremely careful not to burn hot oil!

6. After the lid is removed, we produce visual inspection Oils, covers, and catching magnets. Ideally, the oil should have a bright brownish color, without the smell of Gary and at the bottom of the pallet there should be no coarser fragments or chips. If any, it is desirable to establish the cause and origin of these, for this, most likely, you will have to go to the service specialists.

7. Install a new gasket if the old has come into disrepair, apply a thin layer of sealant and set the pallet to the place.

8. Fill oil into the box, do this is the most convenient with the help of a special syringe or with a leak with a long thin tube. It is necessary to pour until the control opening that should be open does not flow oil. That is, as you understand, the plug is not needed. Fill it better together, you are pouring, and the assistant is following whether the oil was heard through the "control". When the oil was poured, tighten the cork and secure protection in place. We collect the tool and check the oil level in the box.

9. After replacing, many have changed, they say that the box begins to work better, the transmissions are included clearer, jerks disappear and the dynamics of the car are generally improved.

I have everything for this, thanks for your attention and for visiting. Now that you know how to replace the oil in the manual transmission on Chevrolet Lacetti , You can easily fulfill this work at home.