Installing pillows on the rear suspension Ford transit. Installation on Ford Transit. DRIVE-RITE pneumatic suspension for Ford Transit

the main / Tuning

Ford transit minor cars are pretty in demand in our country. Often the choice is based on a more affordable value of this model, in comparison with the sprinter. At the same time, the lifting capacity and comfort of the presented model is not inferior to the last representative. Ford Transit is presented in different variations. In most cases, the manufacturer's manufacturer provides installation on the rear axle of vehicles of springs or springs. However, given the increased demand for freight services, of course, the owners try to exploit low-tonnage cars in accordance with the maximum possibilities. vehicleSometimes it is significant to exceed them, which affects the rapid wear of the suspension and the deterioration of its qualities. It is for this reason that the pneumatic suspension for Ford transit has become a necessary element with which you can achieve significant lifting records.

The pneumatic system has become quite widely used on commercial vehicles. Moreover, it is possible to install it both in specialized car services and independently. Its advantages are obvious. Pneumatic suspension for Ford Transit avoids such problems as:

    quite quick wear of the standard elements set by the plant and increase their life at times;

    the appearance of the side roll;

    versal breakdown;

    suspension trobs.

This is achieved by installing a cylinder, which acts as a buffer and prevents the contact of the vehicle frame with the springs. Pneumatic suspension on Ford Transit allows you to make the movement of a loaded car more comfortable and smoothly in conditions of poor-quality roadbeds, excluding oscillations and punches.

We can purchase:

    auxiliary pneumatic suspension VB-semiair with installation on the rear axle Ford transit for front-wheel drive, rear-wheel drive and all-wheel drive models, as well as for a transit spark in a basic and comfortable configuration;

    automatic pneumatic suspension on Ford Transit VB-Fullair 2C, installed on the rear axle for front-wheel drive, rear-wheel drive and all-wheel drive models, as well as for spark transit.

Systems include air cylinders, supercharger, air mains, electronic indicators, as well as elements and installation devices and fixing.

"Ford Transit" - very common in Russia freight car. Many choose it as an alternative to Sprinter. At the cost of "transit" less, and the characteristics of carrying capacity and comfort are at the same level. Exist different modifications Data trucks - from minibuses up to 20 cubic vans and refrigerators. Usually, springs or springs are put on the rear axle "transit". But many owners replace this pendant to pneumatic. What does it give? Consider in our today's article.

Characteristic

Pneumatic is a type of suspension, with which adjustment is possible road Suit. Such a system is widely used on commercial transport. Manufacturers gradually leave the archaic multi-ride springs in favor of Pneummobalon. Now they are equipped with all semi-trailers and heavy trucks. As for small commercial vehicles (up to three tons and below), the pneumatic suspension is less common here. The urgency of the car - the system is much more difficult than screw springs and springs. How the pneumatic suspension is arranged, let's tell below.

About design

This system Consists of several elements:

  • Air cylinders. They act on the principle of springs and springs - hold the weight of the car and partially quench the oscillations. What pneumatic cylinders look like on "transit", you can see below. They are made of a thick piece of rubber. Inside filled air under high pressure. Due to its elastic design, the pillow can change the form, thereby adjusting the clearance.

  • Compressor. Used to download air to the receiver. The latter has a volume of from 3 to 10 liters. When installing a pneumatic suspension on Ford Transit, it is recommended to use a 10-liter receiver. Usually it is located in the bodies or in the cabin. Note that the budget pneumatic suspension, the "Ford Transit" is installed, may not include these items (receivers). As for the compressor, it is the main component of the system. Without it, the work of the suspension is simply impossible. The unit is operating from the 12 volt network and automatically turns off when a certain pressure is reached.
  • Air highways. On them the air moves under pressure from the compressor to the actuators.
  • Electronic sensors. Track the position and tilt of the car body in real time. Thus, cylinders can roll up at a certain point, making cars more stable on the road. These sensors interact with the control unit. But such electronics is rarely installed on commercial transport. More often it is a lot of business and premium cars.

On this topic: American "muscle car": what is the secret of the "muscular" car in the world?

What is the relevant revenue?

Choosing a package of pneumatic suspension on Ford Transit, do not save on this item. The device allows you to store air under pressure for a long time. If necessary, raise the car, the air from the receiver is quickly (within 4-5 seconds) replenishes the pneumatic block chamber. The latter becomes more solid, and clearance - increases. In the absence of the receiver, the air injection will be carried out directly in the pillow. But it is very long and harmful to the compressor. With frequent use, he can simply burn.

Benefits

How does Ford Transit behave on the pneumatic suspension? Owners claim that the installation of pillows allows to eliminate the effects of car overload. These are lateral rolls, versator breakdown and suspension breakdowns. As for the last factor, the balloon acts as a buffer, preventing the frame from contacting the frame with an indigenous springs.
What else do they say about the "Ford Transit" on the pneumatic suspension reviews? Also, the car becomes more comfortable. The pillow smoothly extinguishes the oscillations and blows at the road at irregularities. For this reason, the installation of pneumatic suspension is often produced on Ford Transit Minibus.

Nevertheless, the main factor that pushes the owners to install the air suspension in Ford Transit, is an increase in load capacity. And with this task, cylinders, according to reviews, cope "on excellent." The load on regular springs is minimal, and the clearance remains the same.

On this topic: Chip-tuning "Lada-Vesti": pros and cons, step-by-step instructions, reviews

disadvantages

Why is the pneumatic suspension on the cargo-passenger "Ford Transit" and other modifications not put from the factory? One of the negative factors is low maintainability. In the event of a breakdown of a cylinder (and this is depressurization), it must be changed entirely. The compressor is also difficult to repair. Yes, and the system itself is not cheap. How much will the installation of a pneumatic suspension on "Ford Transit" cost? Price itself budget option It starts from 20 thousand rubles. Full set Can be installed for 100 thousand.

What to choose?

For small commercial vehicles, the air suspension is often chosen on the rear axle.
As for the type, it is better to establish a system with one contour. You can put a two-kinnoye, but it makes no sense - they say reviews.

Installation

How is the installation of a pneumatic suspension on the "Ford Transit" with your own hands? Note that it does not need to fully remake the chassis for installation. Consider the most popular option - the installation of a single-mounted pneumatic suspension on the Ford Transit (the price of the kit is from 15 thousand rubles) on the rear axle. At first, the brackets under the pillows are installed. The top is attached to the frame, the bottom - to the spersion sheet. During the work, it is necessary to do holes for bolted bolt connections. Next here are pneumatic cylinders. The hoses are connected to them. The compressor with the receiver is better installed in the cabin. In the open space, the place is limited, and in the body (if it is a booth) it may be damaged. Connect electromagnetic valves to the unit and display the control panel to the front panel. On this, the installation of the pneumatic suspension in Ford Transit is completed. Tubes should be laid by inner side Rama, attacking them on the clamps.

DRIVE-RITE pneumatic suspension for Ford Transit

Suitable for all-metal vans of all kinds and modifications, as well as chassis with any superstructures (side platform, industrial van, isothermal van, refrigerator, camper, authomet)

Specifications

  • Applicability: Ford Transit (Single and Double Oshinovka)
  • Year of release: 2006 - present
  • Set number: DR 02.013448
  • Pneumatic Spring: Firestone # 6781
  • Mass set: 22 kg
  • Compressor: 12 V
  • Recommended control systems:
  • DR 11.016110 (single-mounted, compressor # 1260, Max. 7 bar)
  • DR 11.012236 (single-mounted, compressor # 9284, max. Press 9 bar)
  • Possible increase in clearance (rear axle): 50 mm
  • Air pressure:
  • Maximum 7 Bar (100 PSI)
  • Minimum 1 Bar (15 PSI)
  • Certificates of conformity: TP and TUV

The auxiliary pneumatic suspension includes:

  • two high-quality pneummators
  • metal brackets
  • fastener
  • air fittings for pneumatic powder
  • air Tee for Connection
  • plastic tube with a diameter of 6 mm
  • special pumped nipple (not used in the presence of a control kit)

Ford Transit is the leader in the market of light commercial vehicles. Installing the pneumatic suspension DRIVE-RITE in addition to the standard rear suspension, allows you to significantly improve the parameters of the controllability and stability of these cars.

Additional pneumatic suspension Drive-Rite * works in a pair with a standard suspension using a steel spring as an elastic element. Elastic element of additional suspension is a pneumatic spring. Air pressure can manually adjust or automatically using DRIVE-RITE control systems. The consumer can choose the optimal version of the control system, based on the features of the car operation.

Additional pneumatic suspension significantly reduces the load on standard springs, improving the parameters of the stability and comfort of the car.

With the help of the control system, the driver can adjust the pressure in pneumatic springs so as to provide optimal stability and comfort parameters regardless of the degree of car load.

An additional pneumatic suspension DRIVE-RITE is an investment in your vehicle. As you know, over time, regular metal springs lose their elasticity and begin to "seek", which leads to a decrease in comfort, an increase in loads on the chassis elements, an increase in the driver's fatigue, especially when the car is fully loaded.

Additional pneumatic suspension is an active component of the regular suspension of your vehicle. A car equipped with a rive-rite pneumatic suspension kit is easier to control, it becomes more comfortable and safe, in the entire range of payload.

Additional pneumatic suspension DRIVE-RITE is exactly what each owner of Ford Transit is needed (Ford Transit)

Advantages of the pneumatic suspension DRIVE-RITE:

  • Improves car stability and handling
  • Increases comfort and safety
  • Prevents longitudinal roll
  • Supports permanent ground clearance
  • Reduces the transverse roll when uneven loading of the cargo compartment
  • Reducts fatigue loads of suspension elements
  • High-quality components produced in the USA, Germany and Ireland
  • Pneumatic springs from Firestone (World's No.1 Air Spring)
  • Easy installation and maintenance
  • Drive-Rite is more than 20 years of experience in the development and production of pneumatic suspension
  • OEM and TUV certificates

A complex approach

DRIVE-RITE pneumatic suspension kits are easy to install, do not require additional mechanical operations (drilling or welding) and meet the highest quality standards. Drive-Rite control systems are offered as an option.

FRONT TRANSIT NEW with pneumatic suspension

Official Dealer for the sale of new cars Ford Transit Aaron Auto offers for sale ready car already with installed pneumatic suspension on bounce cargo Ford Transit..

These cars Ford with pneumatic suspension can buy Already available in Moscow on Ryabinovaya Street. On the this car Was installed rear set of auxiliary pneumatic suspension from two-circuit control system. This air preparation system is equipped with an air receiver for faster and simple lifting of the body even with maximum loading.

Even if your car does not have a regular pneumatic suspension, this is not a problem. Our specialists in Aaron cars can install the air suspension on your spring car in a short time. All major pneumatic kits for commercial vehicles are always available in stock in Moscow.

New Ford Transit It easily sends with the slightest load. Each transport company Trying to use your fleet of commercial trials to Maxim. But passport capacity Ford Transit. does not always coincide with the wisp of the customer weight Limit With comfort. The most correct and flexible way to compensate for the sedimentation of the new Ford of the transit is to install an additional pneumatic suspension to the standard springs.

This method of installing a pneumatic suspension allows you to save regular suspension elements unchanged. When installing the axial set of pneumobalons, welding, drilling or finalization of the standard suspension is required.

Pressure in pneumatic powders is regulated by two control keys and is controlled by a double-rail pressure gauge with a suspension:

In this case, there is no need to get a regular wheeled compressor to change the pressure. You can adjust the car height from the cab.

Pneumatic control system is installed under passenger seat and hidden from prying eyes:

An additional receiver output can be used to swing the wheels or display the pneumatic signal - the most loud reminder of yourself in the overall stream.

© 2021 Bugulma-lada.Ru - Portal for car owners