Production of kites to order. Prices for kites. Bumper to order - replacement of damaged or manufacture new manufacture of plastic bumpers to order

It is not rare to us by buyers with a request to implement an individual project of aerodynamics to their car, in other words, to develop and make a body kit, bumper, bumper skirt or other parts for auto tuning in a picture or a picture. Turning to us, the client as a rule represents everything quite superficially and does not suspect that it is behind this development, which titanic amount of work is behind the finished part that I would like to get a person. It would seem, here's a drawing, you are experts, take and do. The customer as a rule suspects that the manufacture of allowing the bumper to the order will be a little longer than already existing in the range, and the most important thing and the erroneous opinion is that the detail "under the order" will cost the same money as the same from our catalog. It's a delusion. Material author website ©

To comprehend the upcoming scope of work on an individual project, it is necessary to have an idea how it is generally the manufacture of parts for tuning, which are already presented in the catalog on the site at least on our example, while we draw your attention to the fact that the production process does not look like without exception Producers of parts for auto tuning. You make an order Suppose the bumper, accepting the salesman manufacturer, takes from the warehouse already the finished matrix, the production language "tool" or along the philistine "form" for the manufacture of the bumper you ordered and it prepares for you the product for the order you made. The key here is that the manufacturer takes the finished form, so the production period of your order is usually on average technical conditions And the requirements of the resulting manufacturing technology within 2-3 days, as well as the cost of this bumper for you is exactly as much as stated on the seller's website for the day of order. This cost The manufacturer is calculated based on the cost of manufacturing the product itself. Ie as we see everything simple, you made an order and how buyers say, supplier "cast" bumper, quickly and "in reasonable money." Material author website ©

Now, based on the read, consider how your individual order will be implemented, Ie, the manufacture of suppose, the bumper on your car you did not find in our catalog. You are consistent with the design and form of the future bumper, then we proceed to work. There are several ways to implement the project, consider averaged. First of all, we need a car similar to the time of model work, if the bumper is simulated, if not for all the time of work, then at least with periodic check-in to us for fitting. We solve this issue on our own and usually find a car for the modeling period is difficult, one of the options to take a car for rental. Next, we acquire with the "disassembly" of the standard bumper used on the basis of which will be performed. Having rented a car and purchasing a regular bumper for work is taken by the "model" who, with the help of special materials and methods, begins to form, "output" the appearance of the future bumper of the appropriate figure of the figure or a snapshot. Only this operation may take at least two times, depending on the complexity of the geometry. By readiness of the model of the bumper for work, the "Matrichnik" is taken, it begins with the model obtained to make the transitional, in other words an intermediate matrix (shape). A few layers of resin are applied, glass salas and glassheelogenery with cutting periods of each layer. The term for this operation takes more than a week. When the transition matrix is \u200b\u200bready in it, the first test product is molded, that is the version of the bumper. This, the primary bumper passes a thorough fit and fit on the car, and the geometry disorders are corrected on it and the geometry violations that were allowed during modeling, all sizes and distances are checked, as well as the mirror of the right and left side of the bumper. This operation may not take bleak of the week. The finally, the final version of the bumper passes the refinement of the surface, which is brought by a polyester putty, the surface as it is said is excreted in zero, all the flaws are eliminated. The term of this operation is 3-7 days. From the finished and final model, it is started to remove the matrix, that is, to prepare the final (finish) form. To the bumper, withstanding all terms and periods of drying each of the layers are applied resin and matrix glass. The layers can be on average from 5 to 15, depending on what service life is planned for a matrix (form). The term of this operation is 1-1.5 weeks. And only then, by the readiness of the matrix, a ready-made bumper is made according to your project, it will be necessary for its manufacture in the area of \u200b\u200b2-3 days. The author of the material site

As we see, the process of implementing your project, on just one bumper takes no little time, requires serious material investments, it is also a car rental and the purchase of a regular bumper, huge flow Materials for modeling, as well as payment of the model model, matrix, modulers. As a result, the period of about two months, and the material costs equal to the approximate value of five ready-made bumpers made with this matrix. Therefore, it is clearly clearly realizing the entire amount of work. You need to decide on the implementation of ideas and ordering one or another detail individually. It is usually less costly and at times faster finding something ready among many proposals from various suppliers, thereby not overpaying and saving your time. Material author website ©

Of course, represented by the concept of modeling your project is set forth on the part of superficially, affected the main points of the manufacturing process without deepening into technology, but the general principles are confident and understandable. At the end, you can consider several previously implemented similar projects.

* when using spare parts and supplies The customer and the implementation of single works of less than one norm-hours applies the rule "minimum order for work".

Prices for other types of work are calculated according to the standards recommended by the "Mitchell" catalog.

Prices are in rubles.

Attention!

Cars released before the 1997 issue inclusive are serviced only after a predetermined prepayment.

Diagnostic and maintenance work on cars, issued until 1997 output inclusive, is paid at actually spent time.

Warranty Obligations "Vita-Motors"

"Vita Motors" values \u200b\u200bits customers and therefore carries 100% responsibility for all work performed and parts purchased and established in our service. When contacting us on a warranty case, you need to prevent a copy of the order. In the eventual time there is no possibility to come to eliminate the defect, and by the time you visited the warranty period can expire - you just need to immediately inform us about the problem to fix the moment of treatment, and of course, depending on the malfunction to try not to exploit the car In order not to aggravate the consequences. For example, it was found to flow oil under the car after the night parking, and the client flies on a business trip or on vacation, well, etc.

Attention! "Vita Motors" does not pay works performed in other services, even if the warranty occurrence occurred far away, it is better for us to pay the evacuation of a faulty car, but be confident that it is our fault. Please consider this issue, unfortunately the cases of fraud on the part of not decent customers.

You changed me something and that, I have broken everything, it was far to you and I repaired there, I ask to return the money and / or pay the repair.

Unfortunately, as the notorious Muller said: it is impossible to believe anyone .... I can (c)

This, naturally, does not apply to our old customers or, provided that the service has fixed the defect for a long time and is well known. The main thing is to remember - all problems are solved. Good luck on the roads!

Send price list to e-mail

Services

from 8000 rubles

aster Vita-Motors will descend, make and mounted any hinged equipment For your SUV:

1. Power bumpers (including under the winch)
2. Power thresholds of any design and attachment
3. Brackets for a spare wheel (including moving structures, locked)
4. Expedition trunk for any burden including With fastening on the power frame of the car.
5. Power arcs, headlight brackets, LED beams, and so on.
6. "Keangsatniki", or how many of them like to call many - "Oloosotniki" (we do not have a kangaroo, and the donkeys are full).
7. Protection of bumpers and thresholds.

And much more, both in your sketches and on the finished catalog of work, depending on the wishes and field of application. It is possible to manufacture replicas of power bumpers and other accessories

famous brands, such as ARB or JAOS.

The term of manufacture on average takes about ten days. Painting ready-made details - to choose from:

1. Powder paint
2. Sustainable coating U-Pol Raptor
3. Sustainable premium coating Line-X.
4. Automotive enamel. Colors any, at your discretion.

The cost of making power supply:

1. Power thresholds (no editing) - from 18000r.
2. Power bumper (without mounting and platform under the winch) - From 30000r.
3. Power bumper (without mounting with a playground under the winch) - From 40000r.
4. Expedition trunk (without installation) - from 12000r.
5. Bracket for a spare wheel (stationary, without installation) - from 8000r.
6. Bracket spare wheel (swivel / folding, without installation) - from 14000r.

On the presented photo, the process of manufacturing a power bumper from a 4-mm steel sheet with a hidden platform for WARN winch, with a LED beam CREE, fogy Farams and power tubular thresholds on Jeep Wrangler JK, as well as power thresholds with platforms on Dodge Ram.

On everything made by the masters "Vita-Motors", equipment, including painting, is given a full-fledged warranty, to install equipment lifelong equipment!

Installation made in the "Vita Motors" of power bodies is carried out taking into account the design of a particular car, due to the use of equipment you will not worry about the power frame of the car - the load on the elements is calculated individually.

Production of power supply for Jeep Wrangler JK

Production of body parts at a price of 15.000

Need for Speed. Tuning aerodynamic obligation

Tuning car - the process is creative and requires effort. Competent installation of the aerodynamic kit reduces the windshield, fuel costs and increases the stability and controllability of the car. Lack of equipment and experience will spoil the appearance and dynamics of the future supercar. And unprofessional installation will lead to a deterioration in the stability and control of the machine.
Tuning Atelier ARTFG offers the manufacture of aerodynamic kites to order. You can "pump" the car, change the wings, add or replace non-standard details. The right choice of components and fit an aerodynamic kit helps a comfortable ride on limit speeds.

What is the aerodynamic body kit consist of?

Front bumper. The aerodynamic body kit front of the car protects the bottom from the turbulent raid flow. With a bumper, a power body kit is installed, in a collision, it takes the energy of impact on itself.
Spoilers. Profiled planes designed to "press" the machine at speeds from 120 km / hour. Spoilers are installed on the front and tail bumper, the back of the roof and the trunk.

Rear bumper. Wars the air jet from the bottom and prevents the formation of regions low pressure. On the tail bumper put an anti-cycle, in order to improve the travel stability and stabilization of the flow.

Antiques. Surface with profile, reverse wing of the aircraft. Creates a pressure force to compensate for the lifting force of the case. The anti-cycle put on the lid of the trunk behind the roof, if the car with the body of the hatchback or wagon.

DNA panels. Hide the suspension and the bottom of the car from the counter jet of the air flow, reduce the aerodynamic resistance and interfere with the origin of the vortices.

Side thresholds. At high speed, the side skins remove turbulent vortices from the door of the machine. The air ducts are cooled by rear disc brakes.

What materials are used for the production of kites?

The aerodynamic bundles are made of lung materials: fiberglass, polyurethane, plastics and carbon. Consider their advantages and disadvantages.

Fiberglass. Forms based on artificial resins and harden fiberglass. Comparatively inexpensive and pretty durable. Fiberglass kites - a choice that will be affordable and will not be summarized.

ABS plastic. Components from plastic cheap and lung. The basis of delicate and biting increment increases after the expiration of the service life.
Polyurethane. The material allows you to create flawless smooth shapes, without cracks and folds. The lack of polyurethane products is the complexity of molding and restoration.
Crawlestics (carbon). Modern, lightweight and durable material, but quite expensive. Aerodynamic kits
From the carbon is suitable for premium cars and supercars.

Production of aerodynamic kites to order

Production of collaboration on an individual project is a time-consuming procedure. Designing and creating a form takes a few months:
The specificity of a specific model is envisaged; design project is being developed;
At the stage of the layout, lines are paintakingly, the contours of each part are being studied;
technological processes are thoroughly thought out, master forms and matrices are created;
Ready components are subject to coloring and finishing assembly.

Aerodynamic collaborations to order in Moscow

Auto tuning to order will turn your car into a supercar. The price of the manufacture of aerodynamic kit in Moscow depends on the material and dimensions:

1. Small series - fiberglass. Popular and affordable material.
2. Average series - polyurethanes and vacuum molding. Production will require time and money.
3. Large series - plastic injection in metal forms. Kids "for large boys."

"Bodybuilding" - parts of the car body performing three main functions:

1. Protection of nodes, aggregates and metal parts of the body from light damage.

3. Improving the aerodynamic properties of the car.

Bidding happens from:

• Polyurethane
• ABS plastic
• Metal,
• Composite.

Consider composite families in detail.

Composite parts are divided into several varieties:

First look:

Fiberglass composite colors:

Fiberglass is the most common material in the production of kites and the most popular. Relatively low cost, relatively high specifications firmly attacked this species Founders in the leader's position.

A huge number of tuning companies around the world produced, produce and will produce their details from fiberglass.

Lumma, Hamann., Lorinser, Tech Art, Gemballa, Mugen., Fabulos, Apr., Buddy Club, HKS., Blitz, BomeX. And other global tuning brands are successfully used in the production of their products precisely composite fiberglass.

Advantages of fiberglass tuning bodies for cars:

Low cost in comparison with polyurethane analogues.

• Excellent maintainability.
• Deep forms and complex design, inaccessible to ABS or polyurethane obligations.
• Resistance to temperature drops.
• Mobility of manufacture.
• That is why tuning stuffing is made from fiberglass composites.

Disadvantages of fiberglass kites:

Insufficient comparative elasticity.

• As a rule, a mandatory fit on the car to painting.
• Special requirements for painting fiberglass kites.
• Human factor. There is a low quality due to the manual production method.

As a result, fiberglass composite parts are divided by the buyer buyers in two categories -

The first is the ardors of the composites. As a rule, people are not interested in tuning or do not want to change the appearance of their car and not demanding on the design of their cars. The choice of this category of buyers is most likely to fall on the side of the kites in the factory execution, from ABS or Polyurethane.

Second - fans fiberglass kites. Preferring non-standard options for a complete set of cars. Those who want to stand out from the monotonous flow of the same cars in the stream. Understanding that difficulties in fitting or painting such kites are compensated by their final cost and ready to go through this path.

And those and others in their own way - we will not judge them and let's go further.

Second view:

Carbon composite parts and tuning parts.

Carbon (Ugletka).

Kevlar.

Hybrid. (combination of carbon or kevlar with glass materials)

The peculiarity of this group is the technical characteristics of carbon -

Advantages of carbon boxes:

• Little weight in comparison with fiberglass.
• High tensile strength.
• Thermal features of the material are higher than that of fiberglass.
• Beautiful structure. "Species Manufacturing" does not require painting.

Disadvantages of carbon boxes:

• Working and expensive repair in case of damage.
• Expensive components - more than five times higher than fiberglass.
• A small range of products offered, due to low consumer demand.

This group of body kit on cars exists rather for elected tuning connoisseurs. The choice of details from carbon and kevlar is usually falling in the event of an acute need to reduce the weight of the car or add chic in the case of the use of species details. High price Materials makes similar tuning products by expensive and not massive.

However, in motor racing, these products are used with great success. There are no substitutes for the group of carbon kites.

(To be continued).

Cost for a car - the production technology of inquiries to order.

Both animals are like their owners and cars reflect inner world His owners. One way to emphasize your individuality and allocate your car in the transport stream is a car tuning, that is, a change in technical characteristics or external view car. Body kit for auto is an element external tuning. Custom Custom will make your car unique among millions of others in Moscow.

Budgets for the car can not only give it or brutal and strict or dynamic and sporty appearance, but also improve specifications. Tuning body kit reduces air aerodynamic resistance, facilitates controllability at high speeds, contributes to improving maneuverability.
Bodybag front bumper It serves to give streamlining the front of the machine and the better grip with the roadbed. Flooring thresholds I. rear bumper Eliminate air dive, worsening the stability of the car. Anti-cycle also prevents car separation from the road. And the spoiler redistributes the oncoming air flow. Air ducts and air intakes guide air cooling streams brake system and radiator. Cilia on headlights, radiator grille, expanders wheel arches, diverse overlays and moldings aerodynamic characteristics do not improve, but are tuning a car exterior.

Production of kites for cars are conducted from different materials that have their advantages and disadvantages. Thus, ABS plastic distinguishes low cost and ease, however, it has a narrow range of operating temperatures and is susceptible to the negative effect of ultraviolet and chemicals. Polyurethane and carbon have a number of advantages compared to plastic, however, unreasonably roads. Body kit for the car from fiberglass is the best choice Regarding the price and quality of this material. A wide temperature of the application, plasticity, lightness and strength allow you to create from fiberglass - fiberglass impregnated with resin, Avtuning masterpieces.
Production of tuning of collaboration to order a time-consuming procedure consisting of several stages.

First of all, it is necessary to decide on the design of the future body kit. It can be both universal suitable for a similar car model and made individually according to your drawings and sketches. Then, from foam, sculptural plasticine or polyurethane, the model tuning tuning for the machine is painted. At this stage, it is possible to make changes and the statement of the wishes by the customer regarding the appearance of the body.

In the future, 3D technology comes into business. With the help of a 3D scanner, the coordinates of all points of the car are recorded, which is necessary for the most accurate fitting parts. Also, through 3D scanning, fastening elements of the future body kit on the machine are determined. Layouts of parts in full size is modeled using special engineering programs. Subsequently, the 3D car model and the computer body model are compared, and then the matrix is \u200b\u200bdesigned.
Production of the matrix itself is a complex and time-consuming process. The operator on the computer builds a model that must be reproduced with absolute accuracy. On modern machines with numeric software control 3D milling occurs in several milling mills in different planes according to the specified coordinate operator. 3D milling on the CNC machine allows for accurately and in sufficient quantity to produce parts with a complex geometry.

Then, according to this matrix of fiberglass, details of the carbage tuning for the car are manufactured. Subsequently applies the separation composition based on wax, polishing the surface and facilitating the removal of the part from the matrix in the future. From the inside, the matrix is \u200b\u200bcovered with a special protective and decorative composition of the gelcoat, smoothing the relief and preventing the "bubble" of the surface of the part.

The process of manufacturing the part of fiberglass consists of alternating applied to the matrix of the reinforcing material from fiberglass and special resins. The layers should be laid and seal with the interval necessary for rejecting the resin.
After the item acquires the source form, it is carefully removed from the matrix. The final stage comes. The item is carefully putty, finally grinding and paints.
This is just one of the ways to make a body kit on the car. The method of spraying, contact molding, pressing, infusion can also be used in the manufacture of tuning body kit to order.

High-quality tuning car gives him a certain character and style. And unique fulfilled to order aerodynamic kites The car will allocate you from millions of drivers of identical stock cars in such a huge megalopolis as Moscow and will attach the admiring views of passersby and thread neighbors.
All the characteristics of this type of car tuning are manifested only at high speeds. Installation such as the aerodynamic body kit is not a specialist can lead to a planning result. For example, the screwed poorly spoiler, flying away at the time of the race on the highway, can cause not only regretful of the "money thrown into the wind". Therefore, our specialists will not only manufacture for you the original to order or universal body kit, but also installed it.

Cost for car to order, prices from: