5W30 motor oil for Ford Focus 2. Recommended motor oil for Ford Focus. Marking and admission

Ford Focus second generation - a very popular car on russian market. The car was in demand all over the world - this was facilitated by the optimal level of comfort and manageability, as well as high quality of manufacture, long interceservice interval and unpretentiousness in service. But like any other mechanism, even quality car It is necessary to maintain timely, to carry out according to the regulations, etc. For example, pour oil into the engine. This is one of the simplest and, at the same time, important procedurespositively affecting the service life of the motor. Let us consider in more detail what to pay attention to when choosing an oil for Ford Focus 2.

As known, motor oil Russia is considered one of the most sought-after supplies For the car under consideration. Naturally, you need to regularly replace the oil to ensure normal engine operation. If not follow the elementary rules specified in the instructions, you can face irreversible consequences, up to capital repair of DVS. Let's try to figure out what the most important oil parameters should be considered.

Factory Oil

Interesting the fact that Ford Focus 2 came from the conveyor with high-quality oil Ford Formula F. It is forbidden to merge or change to the first that. The fact is that the factory oil has special additives necessary to host the components of the motor during the run period. So, the onset of the first regulatory should be waited, and only then change the oil to the factory, or to another. Naturally, the first replacement of oil is better to spend in the Ford Dealership Center. When self-service We must adhere to the manufacturer's recommendations.

What does the engine oil affect

Original engine oil has a positive effect on:

• Motor resource
• Reducing fuel consumption
• Dynamics
• Reliability of catalyst

Based on this, we can conclude that to reveal all the advantages. engine Ford. Focus 2 can only be using high-quality oil. It will not be superfluous and an option with additives that will allow to further reveal the potential of the power component of the car.

Types of oils and their differences

Motor oils differ according to the degree of viscosity (SAE) and operational properties (ACEA)

Marking and admission

Not mistaken when choosing suitable oil It will help the labeling and admission set by the American concern Ford. These parameters are indicated on the product label. If they correspond to the numbers specified in the operating instructions, then the oil is suitable.

Periodicity of oil replacement

"Blood" car system is replaced once a year or every 20 thousand kilometers. Suppose the car drove 20 thousand km after three months - it means it's time to change the oil. Or vice versa when in one year ford operation Focus 2 drove only 5 thousand km - in this case, it is also time to change the oil.

Tip: experienced motorists, often operating a car in urban environments, recommend pouring oil every 10 thousand km.

Oil classes:

• Mineral
• Synthetic
• Semi-synthetic

In this case, you can advise synthetics or semi-synthetic, but the exact answer will give a manufacturer

Types of oils:

• Winter
• Summer
• All-season

We note that on the packaging of the winter version there should be a letter w, which is usually preceded by a certain number. As for all-season and summer optionThey are indicated by numbers.

Select Oil

Today, the market car oils Write enough and diverse. Therefore, it is impossible to give an unambiguous answer, the oil of which brand will be most preferable for Ford Focus 2. It is much more important to first pay attention to the parameters, and then consider brands.

As written above, optimal option will be completely synthetic oil - At least because Ford Focus 2 gets such a lubricant at the factory. Synthetic has excellent lubricating properties, and has an optimal viscosity. Alternatively, you can recommend synthetics with additives - for even greater effect.

Pluses of winter oil

1. Reliable work and quick engine launch in low temperatures
2. Winter oil remains liquid even in cold weather, while the starter and battery have a smaller load
3. Synthetics has high fluidity, and due to this quickly applies to all components of the engine. This allows you to avoid the "dry" engine friction
4. Thanks to this oil, the motor warms up faster, and due to this, you can almost immediately start moving
5. Synthetic prevents the motor overheating even in hot weather, since the engine warms only to operating temperature - no more and no less

The best oil producers

Ford approved for Focus 3 a large number of oil producers who have a special certificate. Consider the most sought-after brands in terms of price and quality ratio.

Castrol

The oil of this company enjoys wide demand from almost all European motorists. For example, automakers from France produce their cars only with castrol oil. This is innovative products, to whose quality claims and can not be. In addition, the manufacturer constantly improve its oil, and thus raises its authority. Among the innovations of Castrol, we note the new EDGE oil - it is optimal for the price and quality, and is ideally compatible with the Ford Focus 2 engine.

Mobil 1.

The advanced product that approves all Ford Focus owners 2. Mobil 1 raised the quality bar for ten years ago, and then this oil was not equal in the market. The advantages of Mobil 1 is that it contains a large number of additives that have a positive effect on the nature and reliability of the car, especially when driving along high speed. Unfortunately, there are many on the market mobil fakes 1, so you have to be attentive. The best Mobil 1 oil is the version of Mobil 1 Rally Formula 5W-40, which is well optimized for Ford Focus 2. Naturally, such an oil is not cheap, but it is among the best oils in quality.

Shell.

A decent alternative to Mobil 1. The oil from Shell is cheaper than its nearest competitor, and at the same time is great for Ford Focus 2. Such oil provides a quick start of the engine even in a bodied frost. Therefore, it is not surprising why dealer centers recommend to fill the shell.

Video

Motor oil for Ford Focus 2

Using the right lubricants can extend the engine life and save thousands of blood money on repair. Nevertheless, many motorists do not know which oil is needed for his car. After reading the post about the best motor oil of 2016, I decided to write about the oil for Ford Focus 2.

What oil pouring Ford Focus 2

Unambiguous answer is impossible. Now this number of oils is that even sellers are lost in their assortment. The most important criterion for choosing an oil This should be 100% synthetics and the point here is not that this option is poured at the factory, but in its optimal viscosity and the necessary additives. I will not write about the benefits of synthetics, and immediately go to the answer to the question best oil For Ford Focus 2.

Ford Focus Oil 2

1. Mobil 1 Advanced Fuel Economy

This oil is specially created for those who want to improve the fuel economy of the gasoline engine. It has an unusually low viscosity and a unique combination of additives that give this synthetic oil great advantages compared to other manufacturers. You will feel particular pleasure at low temperatures, and super low viscosity increases the efficiency of the engine and improves fuel efficiency. According to real-world reviews, potential benefits ranged from 0.2 to 2.3% of fuel economy after transition to this oil, and its excellent thermal and oxidative stability helps reduce the aging of the oil.

Good bonus for people who forget to change it.

Available in 0W-20 or 0W-30.

2. Castrol GTX Magnatec

This oil exists for quite a long time and it has special molecules that protect the engine during startup. It will be good choice For those who drive a lot or use the start / stop function.

Available in 0W-20, 5W-20, 5W-30, 10W-30.

3. Valvoline Full Synthetic with Maxlife technologies

This oil is specifically designed for engines with mileage of more than 150,000 km and it has a special additive that helps prevent Jort oil. Antioxidants and the mixture is added to it. Improved leaching and preventing precipitation.

Valvoline Full Synthetic with Maxlife technologies has an additional "relaxed" anti-wear additive that helps prevent premature wear Engine, so it is very desirable to pour like oil immediately after 150 thousand. km.

Available in 0W-20, 5W-20, 5W-30 and 10W-30.

4. Pennzoil Platinum

With this synthetic oil you can participate in the warranty program from the manufacturer. This program covers 15 engine nodes, lasts 15 years or mileage of 800,000 km. If you use this oil and have all checks and records with a hundred, then you get under the insurance of Penniz.

This product is designed to keep the engine pistons up to 65% cleaner than the standards adopted. Customer feedback says that thanks to this synthetic mold, they drove 1000 km more than usual.

Available in 0W-20, 0W-40, 5W-20, 5W-30 and 10W-30.

5. Motul 8100 X-Clean

The last representative in this list will delight dieselists. This is 100% synthetic engine oil compatible with summary filtersSo it can be used in any car that is powered by a turbo diesel engine. It is specifically designed for vehicles with three-component catalytic neutralizers and will help save engines, protecting the environment.

This synthetic oil is suitable for gasoline engines and complies with EURO IV and EURO V standards.

Available in 5W-30 and 5W-40.

Rules for the replacement of motor oils for the Ford Focus of the second generation, as a rule, are reviewed towards reducing the mileage. Consequently, the optimal period between shifts of lubrication in the motor will be 7-8 thousand km. Which oil is better to pour into the Ford focus engine and how much does it make sense to look for official Ford oil, let's figure it right now.

What oil is flooded in Ford Focus 2 at the factory

Mileage is more than 150,000 km. Oil consumption is practically no, within the normal range.

Leone Castrol.

All Ford Focus cars after 2009 are released from a semi-synthetic conveyor, which is called FORD Formula F 5W-30 in the engine. This oil corresponds to the tolerances of FöRD WSS-M2C913-A and FORD WSS-M2C913-B.

Conveyor oil produces French ELF Corporation, while the manufacturer does not recommend changing the lubricant in the engine to the first plan maintenance. This is explained special characteristics semi-synthetic oilpromoting high-quality engine running.

Fake FORD Formula F 5W-30

The fake is distinguished by non-clear text and dimensional structure of the capacitance.

D0 2009.

For motors collected until 2009, when replacing the old lubricant on the FORD Formula F 5W-30 there is no need to use any special flushing and other liquids, the replacement technology also does not change and for topping in old engine with Ford Formula E 5W-30 oil can be used new oil Formula F.

In fact, it is not necessary to use the Ford Formula F 5W-30 specifically. It is enough that the selected oil responds to Ford Ford Ford WSS-M2C913-A and WSS-M2C913-B, especially since for obvious reasons the Ford does not produce any oils and uses third-party products.

Which oil is better to pour in the Ford Focus Engine 2

If there is no desire to experiment with the semi-synthetic, recommended by Ford, you can safely try to pour the oil of the American manufacturer MotoRCraft Full Synthetic 5W-30 S ARI SN.

This is a high-quality synthetic product that has Ford tolerances. At the same time, the price of this oil is one and a half times lower than the promoted European brands.

And how much to pour?

Filling oils oil.

For a two-liter engine, the Ford Focus will need at least 4.5 liters.

From European brands often enjoy Castrol Edge 5W-40 Fully Synthetic, Castrol Magnatec. 5W-30, but they are more expensive. There are more budget series - Motul 5W-30 913C. 2.5 thousand for 5 liters are asked for him.

Specifications

Following the specification, you can maximize the engine life.

In short, the main indicators of the use of motor oils for the Ford Focu of the second generation remains:

• factory specification Ford WSS-M2C913-A and Ford WSS-M2C913-B, which must be designated on the sticker, or simply the recommendation of Ford;
• depending on climatic conditions, it is possible to use oils with viscosity characteristics according to SAE 5W-30 and 5W-40.

Oil filter

Bosch oil filter 0 986 452 044 in context. Made qualitatively.

When replacing the lubricant, an oil filter will be replaced.

For motors of 1.4 and 1.6 liters, the Ford filter will have a catalog number 1714387-1883037, but besides it, you can use analogs from Suzuki with a number in the catalog 16510-61ar0, Bosch filters 0 986 452 019, Bosch 0 986 452 044, FRAM PH3614, as well as good reputation enjoy german filters MANN W 610/1.

Therefore, for any Ford Focus engines, we use the oil of any manufacturer's manufacturer with Ford tolerances and the above-mentioned viscous characteristics on SAE.

Successful to all choices and a large motor resource!

Look interesting video According to this topic

Owners Popular car Ford. Focus is often wondering about the suitable oil into the engine of its machine. This question today is very relevant, given the fact that in Russia there are a lot of focus support. If the oil replacement process itself is carried out without much effort and professional skills, the choice of lubricant requires theoretical knowledge. In this article, consider what parameters you need to pay attention when choosing a suitable motor lubricant On the example of Ford Focus of the first generation.

The engine is the most complicated and important technical unit in the car. It requires timely service, but expensive repair is often available not to everyone, especially owners of supported "focus", which are not entitled to warranty service. Naturally, much easier will entrust the choice and replacing the oil by a specialist dealer CenterBut such a service will cost a round sum. But after all, the replacement of consumables is not the most time-consuming procedure, and it can be performed on its own.
Oil must be changed according to the regulations. In addition, it is possible to understand the need for replacement by oil. So, to check the color and smell of oil, it is required to make a control measurement using a measuring probe. If the liquid is painted in a dark brown tint, has the smell of burned and contains a metal chips, in this case, without replacing the oil can not do.

Oil functions

1. Lubrication of internal components of the engine, preventing their overheating
2. Effective cooling details
3. Reducing fuel consumption
4. Increase the torque and elasticity of the engine
5. Motor can work at full power

Oil parameters

To date, there are certain norms, tolerance levels and temperature viscosity standards for which a suitable product can be selected. For each car brand, these parameters may vary, so it is very important to pay attention to the instruction manual.

In addition, not less important parameter - Oil type. So, in this case, the lubricant is synthetic, mineral and semi-synthetic. The first option is the most suitable for Ford Focus.

1. Synthetic - the most liquid and fluid oil that is not afraid of low temperatures. It can be used to operate in summer and winter conditions.
2. The semi-synthetic is a compromise option for those who have insufficient funds for clean synthetics. Such oil is better to pour into engines of old cars. This is the most thick oil presented on the market today. It is not recommended to use for low temperatures, as it freezes very quickly because of its density. But with such an oil, the owners will never complain about oil leaks.
3. Mineral - the complete opposite of synthetic oil. Like mineral water, it is better to use it for old cars, which have a high risk of oil leaks.

So, for Ford Focus 1, it is preferable to pour synthetic oil. In extreme cases, use semi-synthetic, but only for large runs.
Also, engine oil is distinguished by seasonality - all-season, summer and winter. Each of them has certain viscosity parameters, admission and quality classes.

Factory Oil for Ford Focus 1

Ford Focus FOD FOCUS FOD Formula F. is high-quality and original productwhich is replaced solely according to the regulations, which is about 20 thousand kilometers. If necessary, the regulations can be reduced to 10 thousand if the machine is operated in complex climatic conditions (which is relevant for domestic conditions).

• Castrol is one of the best European engine oils. It is recommended French car manufacturers. As "Castrol" doubt not to have to - this lubricant meets all international requirements, and its beneficial features have a long validity period that favorably affects the replacement periodicity. A high-quality Castrol product plan is explained by the fact that the manufacturer constantly controls production, and at the same time improves its products - makes it more environmentally friendly and efficiently. Relatively recently, an EDGE oil appeared on the market, which is a kind of main product.
• Mobil 1 - product with more than 10 years of history. This firm has a good reputation, and is recognized worldwide. This lubricant is one of the leaders in the market. Mobil oil Contains various additives affecting the efficiency of the motor. With such an oil, the car can be subjected to colossal loads - for example, it is fast enough to ride, and at the same time not to be afraid for engine overload. There are many Mobil 1 options, and the most optimal of them can be considered Mobil 1 Rally Formula 5W-40. It can be recommended by drivers with aggressive driving manner.
• Shell's company - another leader in the market lubricants. Products of this company are resistant to low temperatures, and is suitable even for the most tall frosts.

Output

The brand is not the most important indicator when choosing an oil. So, in this case, first of all it is necessary to study oil parameters - viscosity, admission, quality class, etc., and then select one or another brand. But if the buyer is dealing only with recognized firms (such as Mobil, Castrol, etc.), then in their quality should not be doubted, and you can safely make a choice in favor of them.

Select Motor oil for Ford Focus 2, you can, knowing the year of its release, mileage and most importantly - engine. You can pour both original and not original. There are 4 types of original and several dozen not original oils suitable for this car. To begin with, let's stop at the original:

1. Ford oil Formula. F. 5W30. This is the most popular product for Ford Focus 2. It is recommended to pour it into all gasoline engines with a mileage of no more than 100-150 thousand kilometers or with long-term riding in turnover above 3000. Why is it just before that run? Because when large mileage It, as a rule, begins to evaporate. Motor starts to eat oil. This is due to a small high-temperature viscosity (30) and due to its composition - it is so-called hydrocracking (this is a simplified production technology).

By the way, look at the photo, here it is original oil Ford formula 5W30. Remember it Article 15595E, this is a new article that is not yet faked.

2. Ford Formula S / SD 5W40 oil. This product is created to help for formula 5W30. It has a synthetic composition, does not fade at high loads and large mileage. Excellent choice for gasoline and diesel engines.

3.Ford Castrol 5W20.. It is not recommended to fill it in focus 2. This oil is designed specifically for ecobust engines (with turbine). Although official dealers And they pour it into focuses, there is no sense of any benefit - it costs 30% more expensive than the formula. Moreover, it forms a thinner protective oil film, because it is "energy saving". Definitely - such an oil is not needed!

4. Ford Castrol 5W30.. Special product for diesel engines of the new generation and for Ford Focus Art. Such oil has tolerances for diesel and gasoline enginesbut with priority for diesel engine. Recommend it for Ford Focus 2 No sense - production Focus 2 ended (in 2011) a year before the production of this product (2012).

So - choice of editorial — oil Ford Formula 5W30 and 5W40. Focus on the Mouse - if the oil is 5W30, then go to 5W40. Now you know,