Washing machines for engine parts. Washing machines for details. Wash engine parts to shine. Alternative use of miles for parts and aggregates Magido

LLC "Production Center" Top "is engaged in selling and supplying equipment for washing parts and aggregates for industrial enterprises and automotive services of Moscow. Presented in the catalog automatic washing machines of the "Spectrum" series and portal uroin machines of the Fort series are able to cleaned and degrease:

• large and small parts of engines and gearboxes of middle-class cars;
• malaty and big technique carrying capacity;
• units of special equipment.

Warranty service is provided for all racks for up to 2 years.

Cars for washing partsexcellent proven itself at the enterprises of mechanical engineering and the fuel and energy complex, replacing low-efficient manual labor and significantly increasing productivity. Close cooperation with famous Russian and foreign manufacturers allows you to form favorable prices On the washing equipment, the quality of which is supported by certificates and customer reviews.

Why it is worth buying a washing machinery: advantages compared to manual sink

• The scope of the use of small car workshops to large enterprises of the aerospace industry.
• Reducing the cost of time and improving the quality of washing at the expense of a fully automatic process.
• The use of secure globular solutions of Uniclin 200 and the details of F10.
• Expansion basic configuration equipment at the expense of additional options at the request of the customer.
• Payback and access to profit for a short period of time (usually up to 1 year).

Today, in the machine-building and metalworking industry, where the technology requires a washing of parts and aggregates, more and more advanced washing machines are applied, which allow you to increase quality and performance, reduce energy consumption and negative impact on the environment.

One of the bright examples of manufacturers washing equipment is the Italian company TEKNOX. For over 40 years, this company produces a wide range of inkjet washers for washing parts and units - from small-sized washers to complex conveyor complexes of passing type of multi-stage processing. The uniqueness of the TEKNOX washing machines is that the sink of parts is carried out in a closed continuous cycle. The sink process is carried out by a hot water washing solution under pressure. The solution, in the pot of the washing machine, heats up (up to 80 ° C) by electric tanks and a hydrodynamic pump, through the filtration system, is fed under pressure (up to 10 bar) through a set of nozzles on moving parts in the form of jets, after which, with washed pollution comes back tank. On polluted details in washing machines It turns out the impact of three types: mechanical and physico-chemical. Under mechanical exposure, the effects of a plurality of high pressure jets are exposed to, and under physical and chemical - their temperature and reactivity.
Inkjet type machines allow not only washing and degreased parts from contamination with detergent solution, but also to betray their surfaces specific properties (adhesive, anti-corrosion), applying appropriate special solutions. For this, the leading manufacturers of the chemical industry offer a wide range of efficient and safe concentrates for various materials and contaminants. All the washing machines are designed in such a way that the washing of parts and units occurs in automatic mode. Operator should only set the program settings and run the machine. In the control unit, such parameters are programmed as the duration of washing, blowing, removal of vapors, drying, the heating temperature of the solution, as well as the automatic daily heating of the solution before the start of the work shift. Washing machines Multi-magnetic stainless steel AISI 304 is made and designed with a safety margin for guaranteed operation in heavy conditions. All machines comply with EU security standards.

Advantages of inkjet washers

triple impact;

high performance;

low concentration and temperature of the solution;

economy;

safety and environmental friendliness.

Scope of application

The use of washing machines is very diverse. It can be washing and degreasing, finishing of parts, nodes, units before assembling or painting, processing after casting or machining. Machines also apply to degreasing, anti-corrosion treatment, etching, phosphating, paint removal, etc. The manufacturer shares the use of washing machines into two categories: when maintaining and repairing machinery and equipment (washing parts that were removed from machines, tools, engines and mechanisms, etc.) and in production (flushing new parts after mechanical: turning, drilling, milling, grinding, etc.).

Maintenance and repair of machinery and equipment

Details taken from machines for repair, for the most part covered with various mud: sand, oil and adhesive lubricant, rubber from gaskets, remnants of sealant and various maps. The car wash with such pollution is best carried out in the washing machines if possible with an increased pressure pump and the heating of the solution over 60 ° C, but without additional filtering systems, since such a large amount of dirt will easily cling to any thin filtering system.
Previously, solvents and oil derivatives were used, which dissolved fats, and then the washing pistol with the details were washed off residual pollution. Mainly used the equipment of the submersible type, where the parts were immersed in the tank with the solvent, then they were rinsed with water and manually wiped. After a few flushes, the liquid in the tank became dirty, and the remains of oil and dirt were seen on the washed parts. And since toxic solvents were used, and the corresponding exhaust systems were absent, the work premises were saturated with harmful pairs. To imagine how damage it caused the health of the staff, we will provide some information on the toxicity of solvents.
Chloride solvents are carcinogenic, and in the presence of open fire (lit cigarettes, burners) they decomposed and turned into a neuro-paralytic, deadly gas. Aromatic solvents - oil derivatives - combustion, carcinogenic, toxic for respiratory tract. Other solvents also apply irreplaceable harm to health. In Europe, today is prohibited by the use of solvents. They are used only in equipment for degreasing a closed cycle. In the coming years, prohibitions will be introduced to the production of any type of solvent chloride, as well as other solvents that affect the formation of ozone holes and dangerous when indoors. In some areas, such as cosmic, military, etc., still use hazardous solvents, guided by many years ago regulatory documents. Meanwhile, flushing with solvents can not only be replaced by water-based solutions, but also to optimize, applying inkjet equipment with two or three stages of washing and washing and filtration system.
Modern washing complexes with a rotating basket (platform) and an effective alkaline detergent, non-toxic and not harmful to ecology, allow you to achieve excellent results Washing parts that are processed as part of a care or repair operation.

Temperature 3% alkali washing solution 70 o C, soil duration 15 minutes
Washing machine 1200ht.

Features of choosing a type of washing machine in the field of maintenance and repair of machinery and equipment

The model of the washer should be selected taking into account the maximum dimensions of the washed parts. As practice shows, the greatest popularity is used. the following models Washing machines:

• UNIX 60-80 - for washing small parts in the process of repair and maintenance automotive equipment (for washing engines and gearboxes in general, this installation is not suitable);
• UNIX 100-120 - for washing parts of cars and small vans (automotive engines with the number of cylinders not more than 6);
• Robur 1400. - for washing any parts of engines and gearboxes of cargo-passenger vehicles;
• Robur 1800. - It is used for washing the largest engines, military engines, machines for the mining industry, etc.

Models of milking machines with two baths are usually used for a more thorough flushing, the results of which are presented more stringent requirements. For example, for washing parts of aircraft, helicopters, when grinding engines, when due to rinse is not only achieved more aesthetic appearance Processed parts, but also removes from their surface of those contaminants that could form after the previous washing operations.

Manufacture of machinery and equipment

In the industrial production of machinery and equipment, much attention is paid to the purity of new parts before assembling or packaging. Since the quality of the operation of products largely depends on the results of the sink, completely different demands are presented to the washing machines than in the service and repair. Here you have to deal with the most difficult problems for solving and with a huge variety of machine types. In addition, an extremely important requirement is extended in the industrial sector as quality.

The fact is that in this sector it is now required not to be able to degrease the details, but also flush with various solid particles that remain after machining (chips, abrasive materials, etc.). Moreover, these particles have to be removed from both the outer walls and the deaf holes, the holes with a chopped thread, from all sorts of passages, water and oil distribution channels, the presence of which many mechanical parts differ. Enough, for example, look at the engines and other automotive componentsin which there are many deaf holes and pipelines of water cooling systems or lubrication. Based on these few examples, it is not difficult to understand that now the sink is insufficient, even if it is used in combination with ultrasonic processing or traveling basket, because solid repairers from processing will continue to be present in the washing bath, which will inevitably be deposited again. On already washed details.

Achieve the necessary quality washing allow washing machines with a rotating basket. Here the principle of dive is excluded, and the chip does not settle on the washed details. In addition, this equipment is equipped with a bag filter, which is used when small metal particles cannot be captured by a conventional mesh filter.
Simple details (sheets or stamped) do not represent any problem for successful flushing, since here it is about degreasing the surface. The only one, it is necessary to place the parts in such a way as to avoid the "glass effect", that is, it is necessary to install them so that the liquid after washing is stored inside the part, and the fluid flow. In addition, in order to avoid donating areas, parts should not be blown out each other from water jets. The choice of a washing machine for complex parts, for example, from cast iron and aluminum alloys, parts with holes, as well as parts that have passed mechanical processing should be more carefully.

Features of choosing a type of washing machine in production machine and equipment

For many simple details of a simple form with a small number of through holes, as well as for small batches of various parts, standard washing machines with a rotating basket (platform) are used.
For more complex parts in some cases, modified modified models of washing machines, which are adapted to perform washing in versions providing for positioning or calibration.

Wine contours of special configuration

And only in those cases when there are particularly high and stringent requirements for the quality of the washing of parts and aggregatesIt is necessary to use the above-mentioned special washers, providing for calibration and positioning. In this case, the machines should be designed specifically taking into account both the type of parts (their features, structures and configurations) and the type of process cycle (the number of phases, baths, pressure values, the filtration method, etc.). For such specific cases, with serial production the same or similar to each other, details can be focused on equipment type:

• Robojet. - For washing large parts and parts with plenty of deaf holes (gearboxes, differentials, gearboxes, components of hydraulic systems, etc.).

• Roboclean. – a small-sized washing machine for a small area for washing of responsible details of small sizes.

Washing machine for parts and units, knots, washing complex nodes.

• Roundjet. - For sink of small parts (installation with a single zone of loading and unloading).

• Tunnel. – for washing parts of small and medium sizes, parts manufactured by mass, with a large number of deaf holes and threaded holes (components car enginesMade from aluminum, pump parts, etc.).

• Rotor - For washing of delicate small and small parts made of aluminum, brass, bronze, steel with external thread or threaded holes.

• Linearjet. - for washing long products (axis, cardan and crankshafts, Stanins, etc.) of various weight characteristics.

There are models of washers with two and more baths (tanks). The need for these machines occurs in the following cases:
- Washing of parts made of aluminum or alloys of copper, brass, bronze, etc., and at the same time it is necessary that the details come out shiny, without spots. In this case, after washing, rinsing with demineralized water;
- When the parts are made of cast iron or steel and it is required to ensure protection against corrosion, at least 30-60 days. To do this, a corresponding tool preventing or slowing oxidation (corrosion) is added to the second rinse bath. Protective facilities are there different types: on the oil-basedproviding protection for 30-60 days and dry protective agents that protect the maximum for 30 days.

Recently, detergents have appeared on the market, which simultaneously degrease the surface of the parts and ensure its corrosion protection, that is, the working cycle of the washing is reduced and reduces to processing only in one bath. Due to this, it is possible to simplify the device. wash Installation and reduce the cost of processing parts.

There are models of washing machines that ensure the process of phosphating. Phosphating technological processes can be carried out in different ways, but in our installations only inkjet methods of processing parts are applied, and not submersible. The phosphating is subjected to metal surfaces before painting to ensure a good and longer grip of paint with the surface. In the washing machines under consideration, the principle of spraying phosphating substances on an acid base in a mixture with water is used. The practice of their application turns out to be much more economical compared to the use of solvents, besides, they are much less dangerous, and at the same time able to ensure quite equal results. The only problem with which you have to be considered in this case is that baths should be more than one, two or three (and even more), and the chemical composition of each of them should be monitored almost daily.
The result is the achievement of better clutch paint and varnish coatings. Another advantage of the proposed technological processes should be noted: toxicological problems in the work room can be reduced to zero.

You can infinitely talk about the advantages of Teknox's washers. But, perhaps, the best confirmation of their quality is the names of consumers - for several decades, the company's products have been supplied to the world-famous engineering enterprises, such as Brembo, Lambordini, Same Deutz Fahr Group Italia Spa, Same Deutz Fahr Group Italia Spa, Bonfiglioli Riduttori Spa , ILVA SPA, OTO Melara Spa, Rietschle Thomas Italia Spa

Information for correct selection Washing machine To clean your items. The cleaning of the parts has always been the problem of the machine-building industry, since it is always necessary to choose the sink technology depending on the material and the type of parts, for example, made of aluminum, copper, steel, cast iron, etc. In this regard, it is important not only to choose the type of machine, but also conduct research on the selection of the chemical composition of the detergent solution. In this brochure, we will show several examples of the use of washing machines, but in practice there are much more tasks, on cleaning parts.

It is ready to help all your customers correctly pick up a wash machine under their specific tasks. In any case, our technical staff will be very happy to advise you and answer all your technical questions. Please feel free to contact us at any time.

Washing machines with top loading parts

Purpose: To clean the parts of motorcycle engines, passenger cars and medium-tonnage commercial trucks and mini-buses. Materials of cleaned parts: aluminum, cast iron, steel, etc. Colored alloys The sink of parts is made inside the chamber with sputtering of the detergent solution under pressure ~ 3 atm. through a large number of nozzles.

Special container is used for washing small parts.

Model L-321 for cleaning heads and blocks of cylinders

Washing machines with front loading parts

Purpose: To clean the parts of the large size of the engines of passenger cars, medium and large-tonnage commercial trucks, tractors, buses and special equipment. Materials of purified parts: aluminum, cast iron, steel, etc. Colored alloys.

The sink of parts is made inside the chamber with spraying of the cleaning solution under pressure in automatic mode, controlled by the computer. The detergent solution circulates inside the machine and is disposed of (at the end of its detergent properties) by a special pump.

Basket size

Washing machine with one tank X53 series

Washing machine with two tanks (with rinsing function) -x53 / 2 series

Machine for washing generators

L-212 machine for washing molds

Washing machines tunnel (conveyor) type

Selecting a type of washing machine between the upper / frontal loading of parts, as well as a tunnel (conveyor type), usually depends on the geometric parameters of parts and the required cleaning performance.

All models of washing machines are shown in our catalogs.

: The basic equipment of the machine with a belt conveyor for cleaning parts has functions: -Make; - drying; - The speed of the conveyor belt (smoothly adjustable) - 0.2 ... 1 m / min.

: Very flexible in controlling the car with a belt conveyor for cleaning parts, which is available in two basic equipment having functions:

Option 1 (Single Tank) - washing; -drying.

Option 2 (two tanks) -washing; -rinsing;

Drying. - The speed of the conveyor belt (smoothly adjustable) - 0.3 ... 1.5 m / min.

All washing machines can be finalized, for example, additional options for solving customer tasks. It is important to keep in mind that the low-speed conveyor belt is used for washing parts of complex shape, and high speed - for the details of a simple form.

Standard G400 / 2

Silver S300 washing and drying of all types of pipelines

G1000 / 2 washing, rinse, blowing and drying steel discs for cars

G400 / 2 chain conveyor for washing, rinsing, blowing and drying automotive cardanov

S300 washing, blowing and drying empty plastic boxes

S300 washing blowing with compressed air and drying heavy parts

G400 / 2 chain conveyor for washing, rinsing and blowing pipelines

Silver S300 Washing and Rinse Car Details

Silver S400 Variant of washing and rinse parts from cars in plastic boxes

S300 Washing and drying of automotive parts

Several options for sinks in conveyor washers

Spiral drum machines

The machine has a spiral-drum section, in which the parts rotating in the drum, first cleaned due to the immersion in the detergent solution, and then are washed.

Such machines are designed for washing both small and large parties of small details, such as bolts, nuts, washers, etc.

Two series of such cars are produced: Jolly Line "J" - simple car For washing small batches of details. This machine has functions: only washing and drying. In the standard version, this machine has limited quantity modifications. SPIRA Line "SP" A quick-variable spiral-drum machine, having functions: washing, rinse, blowing and drying, is intended for medium-sized production. This series has a sufficient amount of modifications that will be able to meet the needs of any customer. In the basic configuration produced in two versions: a single tank is washing and drying; Two tanks - washing, rinse, drying.

Spira 480/2 washing + double rinsing + blowing + drying rivets for aviation

N2 SP480 / 2

Washing, rinse and drying of stainless steel sawdust

……..AND MUCH MORE

Platinum series

Rotary machines with a horizontally rotating drum allow you to work out the technology of the sink of parts of a very complex geometric shape. Washing principle: Details are washed with splashing and at the same time the detergent solution is immersed when the drum rotates in the horizontal plane.

The RM 400 washing machine has two drums and provides functions: spraying detergent + immersion and washing + drying of parts. This machine is available with different options.

The washing machine 600-1200-1500 has one drum and performs: spraying detergent + immersion and washing + drying parts. This machine is available with different options.

Washing machine P600 / 2-1200 / 2-1500 / 2 - has one drum and performs: spraying detergent + immersion and flushing + rinse + drying parts. This machine is available with different options.

PM-400 Sink + Drying Details

PM-400 Sink + Drying Car Details

P1500 / 2 m sink (inside-outside)) + rinsing, blowing + drying of large blocks

P600 / 2 washing + washing, blowing + drying

Details from the media

Several examples of parts for washing in platinum series machines

……….. and much more

Selecting the type of machine Depending on the size of the parts, we illustrate on the example of parts with geometrical parameters 40 × 40 × 20 mm, which have a volume of 32000 mm³ or 0.032 liters. If you have a need to wash such parts in the amount of 600 pcs. per hour, the volume of your details will be 0.032 × 600 \u003d 19 liters. According to the Magido directory, the most suitable for this task will be the Jolly J-320 machine, which has a capacity of 30 l / h.

How to choose to choose a washing machine depending on the volume of its one download

Option 1 Basket Filled with Small Details

Details for washing diameter 40 mm Inner hole 25 mm

For example, the volume of the basket is 7 × 9 × 8 \u003d 504 liters. Suppose that in eight hour shift within 5 days you need to make 25 downloads. Then a week you need to load 25 baskets × 504 l \u003d 12 600 l in the car (parts).

The week includes 40 working hours, so in one hour you need the performance of the washing machine 12600/40 \u003d 315.0 l / h.

According to the Magido catalog, we select the closer on the required characteristics of the wash machine - SP-640, which has a capacity of 360 l / h. Features of this car: - When washing parts only from oil pollution (without chips) - the cycle is realized: washing + drying (SP 640); - I wash the parts from oil pollution and metal chips. Cycle is realized: washing + rinse + drying (SP 640/2).

The washing machine has a spiral pitch 200 mm.

ATTENTION. In the Water Machine SP 640, it is impossible to wash the details with a length of 300 mm. If you need to wash the details of a length of more than 300 mm, you must use the Platinum Series series machines. For example, the Jolly series machine wash the parts less than 300 mm, and the Platinum series machines can wash the parts more than 300 mm.

Option 2.
Sink of rectangular details

The volume of one part is 40 x 40 x 150 \u003d 240.000 mm³

With the annual program of washing such parts in an amount of 10,000,000 per year, it is necessary to produce 10,000,000,000: 250 per hour (slave per year): 8 (hours per day) \u003d 5,000 pcs. In this case, the estimated required performance of the washing machine should be no below 240,000 mm³ x 5000 pcs / h: 1.000.000 \u003d 1200 liters / hour.

According to the Magido catalog, we select the P-1500/2 Waken for the desired characteristics, which has a cleaning machine of 1800 l / h.

Option 3.
Washing of fastening details

To implement this task, the most popular solution is the use of two models of washing machines: model SPIRA 640 - 240 l / h with continuous feed feed Model Platinum 1200/2 - 240 l / h Loading parts Add to basket.

Probably, every Russian car enthusiast at least once in his life saw the carburetor was washed in kerosene; And maybe he himself repeatedly practiced. But fortunately, the times are changing, and technology changes ...

Today there are practically no carburetor cars left; And most people prefer to repair them not in the Garage "At Uncle Vasi or Ashot", but in a modern car service, equipped with the latest technology. After all, what is modern and more expensive carThe higher the requirements for its repair, including those used elements and aggregates.

When working related to the repair of the engine of the car, a lot of time and effort leaves for its cleaning from oil residues and other operational contaminants. Unfortunately, it is absolutely not taken into account the harm caused to health; When the mechanic inhales harmful pairs of detergent solutions and liquids.

The most optimal way out of this situation is automatic installation For washing parts of the closed Cycle Magido (Mer. Italy).

Washing in the auto repair shop allows to significantly speed up the process of washing components; facilitates the work of the mechanics, freeing his hands from the routine and painstaking process; And in general, it makes the work of car service staff cleaner and eco-friendly.

In addition, any similar washer for Magido details is made of high-quality stainless steel. This avoids corrosion and exploit it for a long time without any problems.

The principle of operation of the machine for washing parts is very similar to the work of the dishwasher. The main difference is that the basket in which the components are placed, rotates, and the detergent solution can be used repeatedly.

The principle of operation of the installation for washing parts Magido

1. To begin, it is necessary to place dirty parts or units in the filler chamber. Although in Magido devices, additional supports are installed to prevent distillates, it is desirable to distribute them evenly throughout the basket.

3. Inside this device, a P-shaped frame is installed in which stainless steel nozzles are built. This is done in order for the resulting scale does not score nozzles. Through them, under pressure from 2.3 to 4.7 bar, a washing solution is supplied.

Pressure depends on the device model; In addition, it is possible to enlarge it for individual order. In a number of models, two pumps are used to increase productivity (for example, in the stands Magido L102 and L122).

The position of the nozzles is adjustable so that the detergent solution, falling under pressure on the parts or the units, rotated the basket of the device.

4. Some models of washing machines for parts are equipped with a built-in motor sector that rotates a basket with a certain frequency. As a rule, these are models calculated on the maximum load - from 350 kg.

In principle, you can install a motor deuctor on any device for clearing and aggregates (except ECO series); But this option is installed directly at the factory in Italy.

5. When the operation cycle is completed, the timer is turned off and the device can be opened. In this case, care must be taken, because The detergent solution is heated to a temperature of 70 s, and the hazard arises to the ferry. To avoid this, the washing machine for Magido details has one additional option - Hood of hot vapors.

At the end of the purification process, it is recommended to leave clean components in the device for several minutes when open lid.. This will allow them to almost completely dry, because In the process of the device heated greatly and, as a result, when cooled quickly dry. However, there may be moisture in the deepening elements.

The process of washing the elements occurs on a closed cycle: the liquid from the nozzles is first cleans, then flows into the tank; Then through a filter that delays large particles is again fed to the nozzles. Those. No need to change the detergent solution after each cycle of purification.

Washing for parts and aggregates Magido and all of its models are equipped with a function of controlling the level of detergent solution. This avoids damage to the heating elements.

It must be remembered that it is not recommended to put a partial system in the basket that have a smaller size than the cell itself basket itself. For flushing small elements, a basket with a small grid is provided (for all except ECO series).

The average delivery time of this unit (if they are not in stock) is 45-60 working days. Equipment for washing parts comes only under the order. The delivery time of such devices is about 90 working days.

How often do you need to change the detergent solution?

This is a subjective parameter. As soon as it becomes clear that the elements are poorly laundered, and oil films remain on them; We should change the detergent solution. It all depends on how much dirty parts are washed into the installation for washing parts. For example, you can wash slightly contaminated elements, and you can scatter the parts that were on the military conservation.

What fluid should be used for flushing parts?

It is strictly forbidden to use any combustible materials and foaming solutions. Included with the device comes a small amount of a concentrate detergent, which is enough for the first refueling. We recommend to further use Russian counterparts, for example, "Labomid".

How to choose your device for washing elements?

1. First you need to determine maximum dimensions Agregates intended for washing. They should not exceed the diameter of the basket and maximum height Loading devices.

2. In addition, you should know the maximum total weight of the basket download. Excess weight of the load can lead to a breakdown of the entire device.

Some large industrial models can be equipped with gas or diesel heated.

What options are used on Magido?

First it is worth noting that all options are installed only at the manufacturer's factory in Italy. Therefore, it is absolutely necessary at the stage of order decoration, decide on the list of all necessary additional options.

Oil separator. The principle of its work is the following: A thin metal disk slowly rotates on the surface of the detergent solution and the oil film is sticking to it. Then the disk passes through two blades that belong to the oil film from it.

Electric basket. Rotates a basket with a certain frequency. In some units included in standard complete set. Recommended for washing heavy components.

External insulation of the body of the apparatus.Protects mechanics from random burns when contact with the body of the device and reduces heat transfer in the process of heating the detergent solution. Since 2013, Magido has begun production of models: L160, L190 and L210 with already installed case insulation.

A device for extracting vapors.The fan embedded behind the device allows you to remove pairs from the apparatus to the street.

Monitoring the minimum water level and automatic water bay.This option requires constant connection to the water supply.

Frame with nozzles and stainless steel basket.Serve to extend the service life of the device.

Counter hours.Makes it possible to calculate the time of work.

Weekly programming.Allows you to turn on the heating of the detergent solution until the start of the working day and thereby save working hours.

Hot drying.Forced drying of clean elements. Electric heating 3kW.

Carriage for moving basket.Trolley for removing / installing a basket in the device. Used not for all models. It is a standard package of aggregates: L160, L190 and L210.

Increase maximum load up to 1500kg.Only for models: L160, L190 and L210.

Alternative use of miles for parts and aggregates Magido

Washing machine for washing parts can be useful not only in car service. This device is actively operated in the German and France railway depot. In Russia, the demand for Magido products is also growing every year. These devices are used in metallurgy, jewelry and medicine. Large devices are also used when repairing career equipment.

Magido manufactures any industrial devices for special procedures. It can be a conveyor for washing small bolts or a line of several tens of meters for washing non-standard components. All you need for special order is to provide a technical task to the factory so that Italian engineers make the project and calculated the cost and terms of manufacture.