Anti-Laybone for cars. We choose a hydrophobic coating for the car. Anti-Late - Special Coatings with Unique Properties

If an antidote is applied to the windshield, water is going to large drops and quickly comes

When it is useful to anti-Lady

During the rain. At the speed of 45 km / h and above the rain drops begin to "run away" from the windshield. This is how it looks in action:

In winter. In the cold season, the moisture on the windshield quickly turns into ice and prevents the review. After applying the antidest, most of the water goes down from the windows of the car, so the ice is formed much less:

When insects fly. From the windshield treated with antiddle, remove traces of insects is much easier. Most often, no additional cleaning products are needed, and it is enough to wipe the places of contamination with a damp cloth or go through the windshield to the janitor.

When around the puddles. Anti-Layer can also be applied to side glass And on the rearview mirrors. So they will be less dirty from the splashes passing by cars, which will noticeably improve the circular review while driving. And even if the truck sweeps alongside, eliminating the entire car with a wall of water from the neighboring puddle, the anti-duty will break the solid film of water into separate drops and visibility will return in a second.

Antideos for rear-view mirrors make with a very strong water repellent effect: Glaco Mirror Coat Zero

When dirt flies on the headlights. If you treat the headlights with antidest, then even in a very heavy rain or slush the effect of their work is practically not reduced.

On the headlights and the visor of the helmet, it is also necessary to apply a special type of antidesty, otherwise plastic can be poisoned. We recommend universal hydrophobic coating For glasses and plastic: Glaco Blave.

When traveling on a motorcycle. If an antifion is to handle a motorcycle helmet shank, the review during the weather will noticeably improve.

Frequent claims to antiode

Claims to Antifias a lot, but if you sit on the forums and carefully read the statements of the most active participants, you can allocate three main problems.

"The water is going to droplets, but everything also prevents the review. Glass is the same raw "

The task of the antifion is not in the wonderful evaporation of water. His task is to break the water film, collecting water in a drop, which "run away" at speed or under its weight. During the shower, the windshield will still be wet and you will also need to turn on windshield wipers. Just when all they will work at the maximum, you will be quite the most quiet regime.

On the unprocessed antidest, the water of the windshield is a solid wall, sharply makes it difficult to review. On the part where the hydrophobic protective composition was applied, the review is good, because the solid wall of the water is broken into separate drops that quickly go

"After applying the antiform glass as if muddy"

Many complain about a noticeable whitish raid on the windshield after applying the anti-Layman. This is enough frequent problemBut usually it is connected with the fact that a cheap, poor-quality composition was used, or technology was broken: for example, the anti-Layman was applied to the glass, pre-cleaving it from pollution.

"Speaker wiper glass with alcohol-containing cleaning agent and your praised anti-lift immediately sued"

If you want to further care for windows treated with antidest, we recommend a special water-repellent effect cleaner: Glaco de Cleaner

First, "just wipe" any protective composition of something alcohol-containing is a bad idea, because the alcohol will eat everything. Secondly, a layer of any protective composition, even though anti-faded, although, for example, water-repellent wax for LCP, over time, thinned, and then comes out. This is influenced by many factors: what reagents are watered, what liquid the motorist floods into the washer tank, in what condition the wipers and how often the car turns out to be on the car wash.

Therefore, from time to time, the anti-day must be renovated, observing the technology and manufacturer's instructions.

Remember

1. AntiDist - not only about the rain. Together with moisture on the glass, there are a lot of dirt, and special hydrophobic compositions do not give it to cling to the surface of the glasses.
2. Anti-Layer happens different species: Some are suitable only for glass - windshield and side; Others can be applied to the glasses and plastic headlights; Third handy rearview mirrors.
3. In order for the anti-Laybone to benefit, and not harm, you need to carefully choose a particular composition and do not chase for cheap.
4. As with any protective composition, antidote has its own technology of application and use rules - they must be observed.

Send

Now the problem of splashing stains of dirt windshield of the car is quite relevant for all Russian drivers. As soon as it comes to abundant rains or snowfalls, the windshields are almost instantly covered with a large number of stains and flows. Such pollution is significantly hampered by the movement of the machine and often cause a road accident - the glass covered glass does not provide the driver the necessary overview and does not allow adequate to assess the situation on the road. In order not to provoke an accident, the drivers have to ride much slower and constantly look into the road, trying to see something through the layer of spots.

To drop raindrops, snow flakes and just ordinary dirt remained on the windshield of the car, most drivers are now used special toolwhich is called "Anti-Layer".

Being applied to the windshield vehicle, the anti-duty prevents the sticking of dirt and water, as well as snow. It allows you to keep glass clean even when automotive wipers no longer cope with their immediate task. However, this fund has one very unpleasant minus - the cost. Good preparations are very expensive, and therefore many motorists neglect their use, independently inserting themselves in an uncomfortable position while driving in rainy or snowy weather. But from this situation there is a way out: you can make an "antiode" with your own hands. Fortunately, he has a very simple composition, and therefore almost every vehicle owner will be able to independently make equipment for protecting glass with handicraft materials.

How does the "Anti-Date"

In principle, the name of the "Anti-Layer" means for itself. After they cover the windshield or the hood of the car, it appears a hydrophobic water-repellent layer. When raindrops, dirt or snow flakes fall on this layer, they do not spread and do not form drowshes, but form in small balls that quickly roll down. And with a high-speed ride or a strong impact cut, they simply scatter in different directions, cleaning the glass. Most of Fitting on the glass of water simply bounces off the hydrophobic layer, without lingering on it. Thus, the "antidest" can make that atmospheric precipitates will not interfere with the driver to control the vehicle.

It should be noted that the "Anti-Layer" is an absolutely safe means and in no way affects the integrity of the automotive coating, the security parameters and does not worsen the review.

"Anti-Layer" with their own hands

"Anti-Layer" is absolutely optional to buy in the store - it can be easily made himself.

However, before proceeding with the manufacture, it is necessary to clearly understand the principle of its action - the hydrophobic layer created by the drug repels all moisture from the vehicle glasses. Therefore, in the composition self-made means "Anti-Layer" in obligatory Must include hydrophobic drugs. So, the homemade drug, as a rule, consists of:

• Paraffin. A mixture of polymolecular compounds of hydrogen in a solid state. It has excellent water repellent characteristics, because it is used to create this means.

• White Spirit. In domestic conditions, this tool is usually used as a solvent. But if we are talking about processing glass or paint coating Vehicle, you can not worry - it is absolutely safe for these surfaces and does not cause any harm to them. Nevertheless, when using it, it should be remembered that the composition of this means includes flammable components. So it is better to take all necessary security measures.

Also for applying the composition on the surface of the car you will need a regular cotton or non-woven napkin (preferably - in the amount of several pieces).

The method of cooking "Anti-Layer" at home is extremely simple. To create a tool, you will need to grate a conventional paraffin candle on the kitchen grater (with small grain). After that, 10 grams of the resulting paraffin chips will need to be placed in 100 grams of White Spirit. The resulting mixture must be stirred before the paraffin is dissolved. In fact, on this, all the work on the creation of an "antiodey" at home can be considered complete.

How to process the car to the agent "Anti-Layer"

The process of applying an "antidote" on the various surfaces of the vehicle (windshield, wind, side windows), and also on the hood includes certain preparatory stages. In general, the whole procedure is as follows:

• To begin with, all surfaces of the car must be cleaned of dirt and dust. This uses a mixture of a standard car shampoo and ordinary water. It needs to be treated with all the surfaces of the vehicle, which will be applied by the "antiode", as well as the space next to them within a radius of about 20 centimeters.

• After that, the entire plane that will be processed must be degreased. To do this, you can use any standard degreasing agent on alcohol and clean napkins. After degreasing processing, you need to wait for a complete surface drying.
• Only now you can proceed to applying "Anti-Layer". It is necessary to make fast and smooth movements, necessarily tracking fact full coverage Whole glass is entirely. In addition to napkins for applying, you can use a sponge for cleaning without scratches or ordinary cotton discs. They need to soak into the solution and, slightly squeezed, apply to the surface. It should be remembered that if you are in the process of applying tools or polishing, you will attaint the threshold layer of dirt, which can accumulate, for example, under the rubber plugs, it will be able to lead to the appearance of divorces, and all the work will immediately go to the pump. At the same time, forget about the corners and the edges of the surface is also not worth it.

• After the coating was applied to all the planned sections of the external car body, they must be carefully polished. For this, the same napkins or sponge can be used. It is necessary to polish until the surface of the car's glass is absolutely transparent.

Provides improved visibility through the windshield during severe precipitation. This tool allows to facilitate the work of janitor, and not so often. Currently, there are a large number of different anti-teshes for glass windows. Some of them work better, from others there is no effect. Also, such a tool can be made with your own hands using solvent and paraffin (usually ordinary candle). If you had the experience of using this or another anti-Laybone, please write about it in the comments. This will help determine the choice of other car owners.

One ampoule means is enough for processing one windshield and two side windows. Processing recommended 2 ... 3 times. Article - 83199415467. The price is 1000 rubles.

Hi-Gear Rain Guard

Another popular American anti-lift. Positioned as one of the market leaders. The water repeller is made on the basis of polymer compounds. It can be used to process glass, plastic headlight surfaces, and a car body. Prevents sticking of dirt to windows, improves the work of janitors and extends the life of their rubber bands. It can also be used for domestic purposes, for example, for processing window glass.

Sold in three packs - a trigger of 473 ml, and in bottles of 236 and 118 ml. Article of the smallest package - HG5624. Its price is approximately 200 rubles, and the biggest - 550 rubles.

Liqui Moly Fix-Klar Regen-Abweiser

Under the brand name of Liqua Moli, a huge amount is issued automotive chemistry, including antipitious. In addition to directly removing the liquid from the glass, the tool is used to remove traces of insects, as well as inna and snow.

In addition to car glasses It can also be used at motorcycle and other helmets. Apply only on clean and dry surfaces! Recommended periodicity of antipalion application - once a month. One bottle is enough for 3-4 application. It is necessary to store only at a positive temperature! True dry after 10 minutes of exposure.

It is realized by a capacity of 125 ml. Article - 7505. FIX-KLAR REGEN-ABWEISER funds will be 700 rubles.

K2 Vizio Plus.

Produced in Poland. It has an aggregate aerosol form, is implemented in the corresponding 200 ml balloon. The manufacturer declares that the water is given from the glass of the car already at a speed of 55 km / h. But on numerous forums, you can find contradictory statements from full non-exclusion to admiration. However, given it low priceHe is still recommended for use.

It is possible to use the antidest not only on the windshield, but also on the headlights, mirrors, and so on. Note! After applying, the surplus is removed by a wet rag. The price of the mentioned cylinder is only about 100 rubles.

Lavr.

This anti-recorder refers to the average price range and shows satisfactory efficiency. Positioned as an antidote with a dirt-repellent effect. It can be used with windshield and side windows, as well as the headlights of the machine. In everyday life can be used to handle shower doors. It facilitates the work of the gum of janitors and their drive mechanisms. The anti-duty should be applied only on a dry and clean surface.

It is implemented in a bottle of 185 ml. Article packaging - LN1615. Price - 250 rubles.

Mannol Antiaqua REGEN-ABWEISER

Performed by SCT GmbH (Germany). It can be used not only on glass, but also on plastic surfaces (in particular, on the headlights of the car). The polymer formed by the polymer layer has water and dirt-repellent properties.

The tool is highly efficient, however, a small film thickness is marked. Because of this, the antiode has to be applied more often than other similar means. So, one glass processing is enough for 4 ... 5 weeks with small precipitation. It is implemented in a package of 100 ml. The price is 100 rubles.

ABRO CLEAR VIEW.

It is produced in the United States with the corresponding company of the same name. The antidote is a liquid in the canopy, which is used to be applied to the surface. automotive glass. According to the reviews of motorists has a good protective effect.

Before applying it is necessary to wash and wipe dry glass. Anti-Layer can be used only for external glasses (It is impossible to use for surfaces in closed rooms). Shows high efficiency, however, the density and thickness of the film is quite low. Therefore, it is often necessary to process the surface of the glass.

It comes in a 103 ml balloon. His price is 200 rubles.

Runway Rain Guard

Produced on site Russian Federation. The composition is based on silicones that allow you to create a moving coating that facilitates the work of janitors. It is positioned as a means that not only allows you to get rid of moisture on the glass, but also prevents the appearance of nondes and contaminants. The effectiveness of the means is high, and at the same time there is a high thickness of the film and its resistance to mechanical influences. Therefore, it saves a protective effect for a long time.

It is realized in a 200 ml bottle. Article RW2008. The price of the mentioned bottle is 150 rubles.

"BBF Antiform"

The inexpensive is not a very effective antidest in the form of a spray (realized in the form of a push-button sprayer). It has the same properties as the above funds. In particular, its function is to protect the surface of the glass from water and dirt. However, its effectiveness leaves much to be desired, and the film thickness is medium. Therefore, it is possible to buy it only in case of saving money.

The volume of the balloon is 250 ml. Its price is 100 rubles.

How to apply antidate liquid

Immediately it is worth noting that before applying a means, it is necessary to carefully read his instructions for use. After all, only the manufacturer knows exactly in which sequence and what methods and means to use. However, as practice shows, most antifies are applied to the glass surface approximately equally.

The first thing you should remember - apply the antidote is necessary on a clean and dry surface. That is, it is advisable to perform the procedure after washing the car or at least thorough glass cleaning, including using special cleansing agents. It is necessary to remove not only dust and dirt, but also fat stains that can take place on the glass. After performing the cleaning procedure, the surface must be thicker to wipe dry with a vet.

The second - the process of application should performed in conditions when there is no high humidity and exposure to direct sunlight. It is best for this garage, workshop or parking. After applying the antidest, you can use the machine at once (deleting the remnants of the means with the help of a vet). However, what should be known about - during the first day it is impossible to use janitor.

In the warm season, the antidabid has a longer effect, so it is not possible to apply it as often. Conversely, in winter (in the cold season of the year), this time is reduced, therefore it is necessary to re-apply the hydrophobic drug.

An interesting feature of the anti-Layage mentioned is that their action has a cumulative effect. That is, the longer time the car owner enjoys the antidest (for example, over the course of several years it regularly puts it on the surface of the windshield) - the more visible the result of its use.

The process of application is not difficult. Immediately the anti-Layer need to be applied to the surface and grind. The key word in this case is "uniform". After 10 ... 15 minutes with dry veto It is necessary to remove the remnants of the means and make a pretty to polish the glass. In connection with the simplicity of the procedure, it can be completely independently without circulation for help per service station.

Anti-Laybone for cars can be used not only to apply it to the surface of the windshield, but it can also be applied to the side windows, side mirrors, headlights, as well as the machine case.

How to make an antifiere do it yourself

There are several popular antidesty recipes that can be prepared with their own hands. The most popular of them is to prepare the appropriate means from paraffin (Usually, a household candle for lighting is used to obtain it) and any solvent (Most often, the White Spirit is used for these purposes, as a simple and affordable means). Also, instead of paraffin, stearin or wax can be used, of which also produce candles. As for the solvent, instead of White Spirit, solvents can be used for paints (for example, solvent 646).

In general, it can be said that it is necessary to mix paraffin and white spirit in proportion to 1:10 (for example, 10 grams of paraffin and 100 grams of solvent). And then heat the composition so that it is better and faster to stir paraffin.

Observe the rules of fire and chemical safety! Do not overheat the solvent very much and use the means of individual protection. White spirit has a sharp smell, so all work must be carried out in a well-ventilated room!

The resulting homemade anti-lift for car glass is applied similarly to factory facilities. That is, you need to pre-clean the surface of the glass. After approximately 10 minutes, when the solvent is destroyed, the remains of paraffin must be carefully removed with the wind or cotton discs from the glass surface and polish it (however, do not overdo it so that its thin layer still remains there).

This hydrophobic coating has one big drawback - muddy divorces or halo can remain on the glass, which worsens visibility. Therefore, instead this method Pressing the glass of water-repellent properties often use Silicone oil PMS-100 or even trite in the glasses tank pour air conditioner cap for linen ("Lenor").

If it is silicone oil or silicone Grease (Based on which such silicone), then you will need a few drops to apply on the gum of the windshields, and then slightly rub all over its area. When turning on the janitors, they themselves will smear the silicone film on the surface of the glass. Moreover, such a procedure will also be very useful for the gum themselves (they will become more elastic and will be better clean). But it is still better if with the help of the vehicle, the oil PMS-100 or PMS-200 on glass is well confused.

And when there is no desire to bother with processing, but I would like to see the road better in heavy rain, it is sometimes used even a household air conditioner for linen. It was repeatedly observed by car owners, which if add one cap "Lenor" on a 3 liter of water and pour such a mixture into the glass washer tank, then when turning on the windshield wipers and washed with water from the nozzles, the windshield is much cleaned, and the precipitate is much cleaned.

What conclusion?

Anti-Layer for Auto - good method Improve visibility through the windshield, especially when driving along the highway at high speed (when using it in the city, the effect is not felt so noticeable). It also facilitates the operation of the gum of janitors. That is, they work more effectively, and they will need to be changed so often. However, the miracle from the antifier should not wait. As practice shows, the antidest is effectively only when the car is moving at high speed. As for the choice or other means, it all depends on the presence of anti-lifts on store shelves (including it depends on logistics in different regions of the country), their prices, volume and brand. Try to buy an antifion in proven stores In order to minimize the risk of the purchase of fake.

If you want to save, then an excellent solution in this vein will be the manufacture of the mentioned means with your own hands. It will cost you much cheaper, and by efficiency, the homemade antidest is almost not inferior to factory means. However, when making it, remember the safety measures mentioned above!

The service "Anti-Layer" of Russian motorists is familiar for a very long time. However, only the last five years of the history of the development of this driver's assistant were marked by truly the amazing results of application. And this was achieved by. Moreover, cars of the highest price segment are obtained by treatment with the agent of anti-Layer at the production stage - the outer part of the glass is covered special composition. The rest of the motorists turn to the services of the service stations or apply the antiodenda with their own hands.

The right half of the glass is treated with antidest.

How the anti-Laybone works, its advantages

Without going into scientific details, the drugs of the Anti-Layer series, which create on the surface of the water and dirt-repellent effect, are mixtures in which silicone derivatives and polymers are diluted with an organic solvent. When applied, the composition forms a solid connection at the molecular level with glass, alive filling the microcracks formed during operation, and significantly increases its water-repellent (hydrophobic) properties, thereby allowing the surface to remain clean longer. The film that formed does not allow the water drops on it to spread out into the balls - they are collected in the balls and are removed by the oncoming flow of air or roll under the influence of gravity.

This is how the glass protection occurs with the help of antidote

The experimental way is established that the rain compositions most realize their hydrophobic effect when applied on the surface exposed to the windshield of the windshield - headlights of the head light and windshield. The latter is not completely handled, but only in zones that are not cleaned by brushes.

Video: Effect with the use of the antidate

Application on optics helps to work efficiently to operate it. But the use of the composition on the side glasses depends on the aerodynamics of a particular car - here it is necessary to use the anti-foil with a good blowing of the surface by the oncoming air flow. Treatment of surfaces in aerodynamic shadow, extremely ineffective

In general, the advantage of the antidote can be represented as follows:

• Noticeably smaller deposition of water and dirt on the windshield;
• Slowdown in the wear of wiper brushes due to the rarely use of janitors;
• In the windshield, scratches are slower;
• The liquid in the glazyomomer tank is consumed much less;
• Almost complete absence of glare in the dark in the conditions of snow, rain or slush;
• Significantly easier removal of icing in winter and insect traces in the summer;
• On the treated surface, the formation of bold spots from car exhaust products is excluded.

Where can one buy

Aquapel Anti-Laybone is applied using an aplikator

Before purchasing, it is important to remember - not all means with the marking "Anti-Layer" are equally effective. They, like protective polishing formulations, differ in efficiency and resistance. In this regard, two-component complexes in which two chemical preparations are mixed and the protective film is obtained unusually durable. The coating can maintain its effectiveness up to 6 months.

In order to avoid buying a poor-quality antidest, you should follow the rule to acquire products of global manufacturers with a proven reputation. These brands can be safely attributed to Nanonext, Helsfords, Rain-X, Turtle Wax, Liqui Moly., Trico Enduroshield and Ombrelo. Not superfluous in this company will be the well-proven product of Aquapel.

In modern conditions, the anti-Laybone does not have difficulty buying. Specialized auto chemical and autocomestic shops are widely developed in the cities. In the province you can use the services of online services. There is only one rule - it is necessary to abandon the acquisition of extremely cheap tools on the car market, the effect of the use of which will be zero. In this situation, a significant price is due primarily to the use of nano-technologies, highly qualified knowledge and modern equipment.

Proper application with your own hands

To carry out this procedure:

1. Warm and dry weather with air temperature not lower than + 10 ° C and no more than 60% humidity;
2. Water and all sorts of sponges and rags - for washing and drying the surface of the glasses;
3. Means for degreasing the surface that does not include waxes and silicones;
4. Paper towels.

First of all, the car should be put in the sun protected from the sun. Then it is necessary to spend thorough cleaning of the surface of the glass. For high degree Pollution does not do without the use of special detergents. Wine clever brushes need to rinse as thoroughly. After that, all flushed surfaces wipe dry.

Immediately before applying the canopy, the antidote is shaken and the antidote is sprayed throughout the area being processed. Also allowed by applying soft tissue (microfibers) with a significant effort to the vehicle. The most effective will be sectoral processing.

The final stage, when coating surfaces, the antidest should necessarily become a thorough polishing of its defensive film of the maximum degree of smoothness and transparency. This procedure is carried out exclusively with paper towels or a microfiber cloth, removing the excess means in the process.

Something useful for you:

Application Anti-Laybone Aquapel

Video: Aquapel. Aquapel application instructions

The compositions of Aquapel are applied as an applicator, and not spray.

First of all, the working surface is cleaned and carefully degreases. Then with the help of a paper towel, it is brought to absolute dryness and purity.

After that, the Aquapel Applicator is applied to the glass with a sponge, and the wings are very squeezed until the inner ampoule is destroyed. Aquapel composition is distributed over the entire plane processed by several dynamic strokes. Next, the applied substance is rubbed on the surface by the same applicator. During this operation, it is advisable not to bring a sponge to the edges for a distance of about 2 cm, since it can be strongly polluted.

After two minutes, the surface is arranged until the common paper towel is completely transparent, which is replaced by necessity.

It is important to remember that Aquapel should be used no later than 15 minutes after opening. It is also not necessary to apply it on a head optics with plastic lids. And when applied, it is necessary to avoid direct exposure to ultraviolet and any moisture.

Video: example operation of the coating of glass Aquapel

In addition, it is impossible to underestimate the factors affecting the operation of processed parts.

• First of all, these are older wiper brushes with inelastic rubber, which are capable of like sandpaper, rub the glass. In the case of the use of poor-quality janitors, the protective film will last two or three times less.
• Extremely polluted glasses on machines that are rarely clean. On the windshields rarely washable cars formed a film made of soot, dirt and dust, oils, bitumen, etc., which the wipers simply are simply not able to completely remove. Only careful washing with special compositions will help in this issue.
• It is also important to remember that the ancient Aquapel antidest, as itself, and the means of other manufacturers, to ensure maximum efficiency requires periodic updates. It follows this short procedure monthly. You can update the anti-Laybone with your own hands or ask for this specialists of branded miles.

How to remove the antiode

With this procedure, absolutely no difficulty will arise if the composition is initially applied with the compliance with technology. Usually, the film itself is evenly engaged over time under the influence of janitors and air flows. Speed \u200b\u200bup this process can only wash glass with aggressive chemistry. Anti-Layer, applied by one-time and without a subsequent update, usually grabs from 2-3 to 16-20 weeks, depending on the frequency and duration of travel, as well as from the duration of the use of wipers.

In the case of a protective film, individual strips on the scattered areas of the surface such a coating should be removed immediately. If the application technology was observed, then this procedure will not cause difficulties - it is enough to fold the paper towel fourly and with great effort to wipe it with a glass of circular motions.

It should be started from the corner. Accelerate the removal is capable of heating or softening the film Anti-Layer. Assist in this can straight sun rays. Strengthen the effect will be able to reflective web, placed on the back of the glass. In addition, an ordinary medical alcohol will be a good assistant. But, be that as it may, most effective tool It will be the composition for removing the antidote, produced by the same brand.

It is also important to remember that regardless of the selected method of removing the protective film, after this procedure, it is necessary to clean the surface of the abrasive clay and expose glass to careful polishing.