Automotive compressor from cigarette lighter: species, reviews. Automotive compressors: repair, diagonal, prevention How to use a compressor for tires from cigarette lighter

Gains increasingly popular automobile compressor To swap tires, and this is understandable, because it is so controlled by the condition of the wheels is much more convenient than with its predecessor - a foot or manual pump. We will try to figure out how to use such an aggregate.

Certificates of compressors for cars

Already from the name it follows that the main function is the podachka, however, almost all models of such compressors are equipped with additional nozzles that make it possible to easily inflate the rubber boat, the mattress, the ball, as well as other rubber inflatable products. In addition, it is quite often for their package also a pressure gauge, so now you can independently check what pressure in a tire one or another.

For owners of inflatable mattresses and boats, a function is also useful to pump air. And the lantern with a red light filter will help in an emergency. Compressors work from the cigarette lighter and become indispensable assistants on the road, if necessary to go to long distances. However, as practice shows, from the cigarette lighter nutrition is very unreliable, for some reason the compressor burns out, so experienced motorists prefer to eat from the battery.

There are two main types of automotive compressors: piston and membrane. But they all consist of an electric motor, cylinder, as well as a pressure gauge. In the compressors of the membrane type, the main working element is a rubber membrane located between the lid and the cylinder. The compression of the air that can be called the basis of the whole of its work occurs by making a membrane of a number of reciprocal movements. What about piston-type compressors, so in them the compression of the air is due to the movement of the piston.

The general principle of use is to connect the compressor to power, winding the hose on the nipple, test pressure on the pressure gauge and the inclusion of air pumping to the desired pressure.

Mephracted wheel compressor

Because of its shortcomings, membrane compressors were not widely distributed among motorists. Their most important minus is bad tolerability of cold weather. For low temperatures The membrane becomes more rigid, fragile and during operation may generally collapse from the applied loads. Also, due to cold weather, the power wire can be spoiled, its shell cracks, and copper wiring closes, which leads to the failure of the cigarette lighter fuse.

In addition, they cannot provide maximum pressureSo you should not hope for a quick podachka. But at the same time, all of them possess and dignity - an acceptable price, which is an order of magnitude lower than that of piston analogues. If you are still the owner of a membrane compressor, then it is not necessary to overload it strongly, in order not to burn, so if you need to swipe tires truck car, let's take him a rest somewhere every 15 minutes. It is perfect for bicycles as well passenger carsmobiles that are operated in warm regions or simply in the warm season, and do not require too high pressure.

Piston compressor to swing tires

Piston compressors, thanks to their wear resistance and high degree of reliability, are greater popular with car enthusiasts.. Also, they significantly exceed their membrane analogs and in the speed of pumping. Yes, and the possibility of operation at any time of the year plays a considerable role. It is clear that such piston compressors are considered more reliable, which all parts are metallic. In addition, such models are considered to be resistant, where the metal connecting rod is installed directly on the shaft, and the piston ring is Teflon.

Despite its positive characteristics, piston compressors can also not work for a long time without rest, as strong friction is created in a pair of piston-cylinder. Choosing them, it is necessary to pay attention to the carrying capacity and metal from which they are made. The most enduring are steel, but compressors made of soft metal types of aluminum are out of construction much faster. Such aggregates are perfectly suitable for owners of both passenger and trucks.

Many people do not have ideas about what a car compressor is needed. This unit is required in each vehicle. It is used to pump the wheels and determine the tire pressure.

Devices are available large sizes and small. Miniature models can be taken with them on a trip, placing a car in the trunk, large - installed in the garage stationary. Many copies are able to assist in painting the body. There are instances with a built-in flashlight and auto-power function.

In order to purchase a high-quality car compressor, which will last for a long time you need to properly approach his choice. In the case of acquiring a poor-quality apparatus, there is a risk to face a breakdown of the device after a couple of months.

In choise car device This article will help you to swing tires. For you are collected best models Compressors for cars. When drawing up a selection taken into account specifications Each model and consumer reviews. All advantages and disadvantages of models are indicated.

Berkut R24.

A car compressor for Berkut R24 SUVs has high performance and is convenient for use. Equipped with a high-precision analog pressure gauge. Connected device K. car battery. When working does not vibrate and not noise.

The kit includes: twisted the extension hose on which the DF-029 pressure gauge is installed, 2 adapters for pumping mattresses, 1 adapter for pumping the air of rubber balls, a bag-case for storage and transportation.

Pros:

• High efficiency.
• Accurate readings of analog pressure gauge.
• Low noise published.
• Tire pumping takes little time.
• The coagulation of the air hose and the valve deflator does not increase the temperature in the process of use.
• Connection fitting to the wheel is not very heated at long work, the temperature is comfortable for hands.
• Air flow rate - 64 liters per minute, it is more than most compressors this type.
• High-quality assembly and components.
• The kit includes shift nozzles.
• Low weight is only 5.5 kg.
• Small dimensions: 350x140x183 mm.
• For a long time without a break - 1 hour.

Minuses:

• Too rigid cap button cap.
• With a long operation of the compressor, the cylinder head is strongly heated.

Best two-star car compressor

King K90x2s

K90x2c Kachka Compressor - Apparatus russian production. It has low power consumption and high performance. Comes complete with a bag cover and set of nozzles.

Equipped with overheating protection system and pressure safety valve. Can work up to 30 minutes without breaks. The device has a compact size and handle for transportation. Connects to the nest of the car cigarette lighter.

Pros:

• High air supply speed - 57 liters per minute.
• Rich equipment.
• Long universal extension air hose - 5.5 m.
• There is an overheating protection system.
• Analog pressure gauge of high precision, generations by two scales.
• Safety valve pressure.
• High pump speed.
• Carrying handle.
• The device has small dimensions: 260 x 220 x 230 mm.
• Low weight - 2.7 kg.
• The use of the device without a break is 30 minutes.
• There is a pressure descent button.

Minuses:

• Higher price in comparison with counterparts.

Best Automotive Membrane Compressor

Berkut R15

The model has low weight and sizes that unconditional plus for a car compressor. The configuration has a long hose, allowing to reach any wheel and a set of removable nozzles. different sizes.

Differs high performance in combination with a device compactness. The device is equipped with a high-precision pressure gauge and automatic overheating protection. Connects to a car battery or to the cigarette lighter.

Pros:

• Good performance - 40 liters per minute.
• Automated overheating protection.
• High-precision pressure gauge with two measurement scale: atm and psi.
• Long air hose - 1.20 m.
• The presence of a built-in fuse.
• The duration of continuous use is more than 30 minutes.
• The presence of a trigger valve.
• Dustproof performance.
• Resistant to abrasion piston ringproduced from fluoroplastic.
• Air valves made of stainless steel.
• Large set of replaceable adapters.
• Low weight - 2.36 kg.
• Small dimensions: 90 x 155 x 170.

Minuses:

• High price.

Best Piston Car Compressor

Vitol KA-T12181 Tornado

Buying a car piston compressor Vitol KA-T12181 Tornado will cost cheaper than buying another piston model. The manufacturer reduced the cost of the apparatus at the expense of some significant simplifications.

The model is ideal for passenger carsBut with cargoes may arise difficulties. High performance and low consumption current. Equipped with a powerful lantern. There is a device connecting to the battery.

Pros:

• Low consumption current. Maximum value - 14 A.
• High accuracy analog pressure gauge.
• The temperature range in which the device runs - from -40 ° C to + 80 ° C.
• Good power - 150 watts.
• Long air hose - 3 m.
• Long power cable - 2.7 m.
• The duration of continuous use is 20 minutes.
• Comfortable bag-cover from fabric for transportation, with rubber inserts at the base that prevent gliding in the trunk.
• The model is equipped with a built-in flashlight of 5 LEDs.
• Protection against overheating.
• Minimum dimensions: 207x80x160 mm.
• Low weight - only 2.4 kg.
• Low cost.

Minuses:

• Little nozzles in the configuration.

The best car compressor from the cigarette lighter

Hyundai Hy 60.

Compressor with high performance and low noise level. Does not make vibration. It is used to infamize tires of passenger cars, motorcycles, bicycles and even inflatable rubber boats.

LED lamp is embedded in the case. The device has compact dimensions and automatic system Overheating protection. The device connects to the onboard network of the car through the cigarette lighter.

Pros:

• High air supply speed - 60 liters per minute.
• Low vibration and noise.
• Equipped with a built-in LED flashlight.
• Compact. Dimensions: 100 x 155 x 200.
• Lightweight weight - 1.8 kg
• Does not heated with long use.
• High pumping rate.
• The greatest pressure is 10.5 bar.
• Comfortable bag for storage and transportation.
• An acceptable time of operation without breaks is 30 minutes.
• Fuse - 15 A.
• Long power cord - 3 meters.
• Connector with pressure discharge valve.
• Low cost.

Minuses:

• Small errors in the testimony of the pressure gauge.
• Short air hose - 80 cm.

Best car compressor from battery

AVS Turbo KS 600

The model can be used not only for pumping automotive wheels, but also for inflatable boats or mattresses, for this kit there are appropriate nozzles. The device has high performance and low consumption current.

Equipped with overheating protection and high precision pressure gauge. There is a button shutter button. Non-slip rubberized legs are provided for greater stability of the device.

Pros:

• High air supply speed - 60 liters per minute.
• The power of the device is 250 watts.
• Small consumption current. Maximum value - 23 A.
• Button to descend excess air and pressure correction.
• Non-slip rubberized legs.
• Automated overheating protection system.
• High-precision double analog pressure gauge.
• Rich equipment: Bag-cover for carrying, large set of nozzles of various sizes.
• Universal extension hose.
• Power wire - 3 m.
• Light weight and sizes.
• Quick-release connection.
• Not high level The noise published during operation.
• Fast pumping wheels.
• Low cost.

Minuses:

• Heated with a long work strongly, so the manufacturer has a special carrying handle.

The best car compressor running 220 V network

BERKUT SMART POWER SAC-180

The device is designed to inflate and test pressure in wheels. vehicle of any type. The compressor has been operating from the household network 220 V. Made in a shockproof case. It has automatic protection of the device from overheating.

Pressure gauge gives testimony with high accuracy. The device is sold complete with additional fittings and nozzles. It has high performance and durability of operation.

Also, it is worth noting, ample opportunities and low levels of noise published during operation.

Pros:

• Wide functionality.
• High performance: 180 liters per minute.
• Good equipment.
• A large set of additional nozzles and fittings.
• Shockproof case.
• Low level of noise published during operation.
• Overheat protection.
• Minimum dimensions for the compressor of this type - 300x225x340 mm.
• In comparison with the analogs, a small weight is 6 kg.
• Comfortable air hose, 3.1 m long.
• Tire gun.
• High accuracy of the testimony of the pressure gauge.
• Good duration of continuous use: about 30-40 minutes.
• Capacious pocket for storing wires and nozzles.

Minuses:

• High power consumption - 1100 V.
• The cost of the device.

Best Automotive Battery Compressor

Airman Owl 2000.

The compressor with the battery is designed specifically for those who do not want to mess with wires. And at least the Airman OWL 2000 apparatus is not the highest performance, it is the best instance among the compressors with the battery.

Pros:

• No need to mess with wires.
• If desired, the device can be connected to the cigarette lighter connector, while the device performance and air supply rate increase significantly.
• Small sizes: 205x75x60 mm.
• Lightweight weight: 1 kg.
• Long power wire - 3.4 m.
• Low current consumption indicators. Maximum consumption - 14a.
• Excellent equipment: replaceable battery, with a power of 9.6 V; a set of replaced nozzles of different sizes; charger; wire to connect the device to the car cigarette lighter socket; Convenient transportation bag; Automatic pressure regulator.

Minuses:

• Low capacity - 18 liters per minute.
• Slow pumping.

Best automotive compressor with electronic pressure gauge

AVS KE 350EL

The model is made in a plastic case. The compressor is equipped with ventilated panels and lantern with scattered orange lighting. Included there are three removable nozzles.

The hose is equipped with a quickly removable clamping tip. Display at the model - liquid crystal. For transportation of the device there are two handles made of metal. The device is connected to the cigarette lighter socket.

Pros:

• High accuracy of electrical pressure gauge readings.
• Excellent air supply rate. 35 liters per minute - this is higher than most analogues.
• Sustainable rubberized legs.
• A large set of replaceable adapters, expanding the borders of the application.
• The presence of a flashlight.
• Quite a long time continuous operation - 30 minutes.
• Low power consumption - 12 V.
• Small dimensions.
• The weight of the device is only 2 kg.
• Device protection system from overheating.
• Quick-release clamping tip.
• LCD display.
• The presence of handles for carrying.
• The low level of the noise of the noise and the lack of vibrations.
• Automatic pressure level limiter.
• Available cost.

Minuses:

• Scooty equipment: set of nozzles, bag-case for storage.

Best Car Receiver Compressor

AGR-3LT aggressor

The device is designed for rapid pumping wheels of different sizes. The compressor is equipped with a 3-liter receivers. The compressor has a fairly high air supply speed - 35 liters per minute, it allows you to fill the receiver with a compressed air in two minutes.

With full filling the receiver, the device automatically turns off.

The polyurethane hose in a length of 10 meters does not lose flexibility at minus temperatures. The gun is equipped with a pressure gauge with two measurement scales and bypass valve.

The body of the apparatus is made of metal, it allows the compressor to avoid overheating during operation. A compressor is connected to the cigarette lighter or vehicle battery.

Pros:

• Long hose - 10 meters.
• High performance - 35 liters per minute.
• The presence of a receiver, a volume of 3 liters.
• High precision double gauge.
• Built-in fuse to protect against voltage drops.
• Long continuous operation - 30 minutes.
• Low consumption current. Maximum value - 14 A.
• A wide range of temperatures of which is possible to use: from -40 ° C to + 80 ° C.
• Low weight - 6 kg.
• Compact dimensions - 340 x 245 x 290 mm.
• There is a pressure descent button.
• Good equipment: extension hose, adapter for connecting the pneumatic tool, wires for connecting to the battery and cigarette lighter, spare fuse, spare sealing rings.

The price corresponds to the quality.

Minuses:

• The cigarette lighter plug breaks.

The best car compressor with a lantern.

Katch K70.

Compressor in plastic housing. Equipped with ventilated panels on the side walls of the case. On one of the walls placed the lantern.

Liquid crystal display with illumination ensures the convenience of reading the readings. The control buttons are conveniently located and simple. There is a handle for transporting the device and a bag-case for storage.

Pros:

• Double digital pressure gauge.
• The flashlight illuminating with red light is convenient, you can use in an emergency. It has two modes of operation - permanent and intermittent.
• The ability to check the battery and generator state.
• There is a function of establishing an inflation limit.
• Low level of noise published when working, lack of vibrations.
• Wide range of permissible temperatures: -30 ° C to + 40 ° C.
• Low consumption current. Maximum value of 13 A.
• Automatic overheating protection.
• Comfortable sizes - 230x225x110 mm.
• The low weight of the device is 2.2 kg.
• The duration of continuous use is 30 minutes.
• Moderate price.

Minuses:

• Small number of replaceable nozzles - 3 pcs.
• Scuntful equipment: set of replacement nozzles, bag-case.

Best Professional Car Compressor

Heyner 230 V / 500W

Portable compressor high power. Used to pump the wheels of any vehicles. It works from the network 220 V. It has high performance, copes with the pumping of tires of trucks and minibuses.

The kit includes 4 removable nozzles of different sizes and bag. It has good stability due to the support plate.

Pros:

• High performance - 50 liters per minute.
• Long cable - 3.4 m.
• High pressure - 10 bar.
• High precision pressure gauge -10 ATM / 150 PSL.
• Low weight - 3.7 kg.
• Small dimensions - 120 x 180 x 250 mm.
• High power - 500 watts.
• The presence of the support plate.
• In comparison with the analogs - low cost.

Minuses:

• Short hose - just 1 m.
• Small duration of continuous operation - 2 minutes.
• Scooty equipment: bag, 4 adapters.

The best car compressor with auto power desk.

Chameleon AC-200

The operation of the device is very simple - controlled in electronic mode and is equipped with the auto-power function. After connecting the hose to the nippel and the selection of the required pressure, the compressor will make it all independently.

Equipped with a liquid crystal display and built-in light.

Temperature range at which Operation is possible - from -30 ° C to + 50 ° C.

It has a thermal sensor and voltage control sensor.

Sold bundled with a set of nozzles of various values. There is a special compartment for storing wires and hose. Works compressor from the cigarette lighter.

Pros:

• Good accuracy of an electronic pressure gauge.
• AutoCillion.
• The presence of a thermal sensor and acb tester.
• For a long time of continuous operation - 30 minutes.
• Low consumption current - 10 A.
• Long power cable - 3.5 m.
• Automatic overheating protection.
• Small weight - 1.65 kg.
• Compact sizes.
• There are additional nozzles.
• The presence of a built-in lamp.
• Low cost.

Minuses:

• Short hose - 70 cm.
• Scuntful equipment: a set of three nozzles.

The best car compressor for airbrush

FIAC Cosmos 50.

FIAC Super Cosmos 50 piston oil compressor is used in everyday affairs and repair shops for working with airbrush.

It has high power and performance. The weight of the device is high, but this is compensated by the presence of wheels for transportation. Works apparatus from the household network 220 V.

Pros:

• Excellent productivity - 240 liters per minute.
• The large volume of the receiver is 50 liters.
• Low level of noise and vibrations produced.
• The greatest working pressure is 8 bar.
• The presence of a support leg for stability.
• Two high-precision analog pressure control pressure gauge.
• Pressure adjustment reducer.
• Wheels for transportation.

Minuses:

• It takes quite a lot of space. Dimensions: 760 x 320 x 670 mm.
• Large weight: 36 kg.
• High price.

Best rotary automotive compressor

Katun-307.

The device is used to pump the wheels of passenger and small cargo trucks. The device has a plastic housing with special ventilation holes. It has high performance and low energy consumption.

Analog pressure gauge gives testimony with high accuracy. The device is equipped with a light bulb and switch. The apparatus is powered by connecting to the car cigarette lighter.

Pros:

• Low consumption current. Maximum value - 12 A.
• High air supply speed - 40 liters per minute.
• High precision analog pressure gauge.
• Long power cable - 3 m.
• Small sizes: 160x80x155 mm.
• Light weight - 1.85 kg.
• Lamp for highlighting.

Minuses:

• Very short air hose - 30 cm.
• Small duration of continuous operation - 12 minutes.

Best Automotive Stationary Compressor

Berkut Pro-24

Stationary automotive machine for pumping tires Berkut Pro-24 is one of the most powerful. It has high performance and compact dimensions.

The main distinguishing feature of the apparatus is a long-continuous work. The device is equipped with an overheating sensor and IP67 protection system. The kit includes a set for mounting.

Pros:

• High performance - 47 liters per minute.
• The possibility of continuous operation is 2 hours.
• Protection against temperature drops.
• Water protection - I
• Set for mounting.
• High efficiency.
• The operating power of the device is 250 watts.
• Not much high noise.
• Small dimensions - 284x102x167 mm.
• Low weight for stationary installation - 5.6 kg.
• The temperature range at which it is possible to use: from -30 ° C to +80 ° C.

Minuses:

• Short hose - 50 cm.
• High consumption current - 21 A.

The car is a mechanism that a person uses to pump the car tires. At the moment, this device is found in the market in a variety, make the choice of a specific model among them is extremely difficult. It is worth first to figure out how the work is performed by this mechanism, due to which the pressure and other nuances are injected. Among the common models, the use of a crank-connecting mechanism prevails, with the help of reciprocating movements of which the device pumps the pressure necessary for operation.

Tire during operation is exposed to a huge number of factors - both the external environment and from the use of the car. This creates conditions for sliming the tires, it is necessary to re-pump. To pump air into the tires with a mechanical pump is extremely uncomfortable, therefore, the autocompressor was invented, with which this problem is solved at times faster. However, the selection of the model of this device should be done carefully and focus not only for the available funds, but also on quality. Before you purchase a car compressor, it is better to read the reviews, the characteristics of the models that have faced models and to pay a few munut this modest article.

Technical device

The small compressor for purging is purchased in order to maintain the air pressure in the tires. What should be the wheel and which inside should be pressure written in technical conditions operation of a particular car.

Air pressure in the tire can become less than the desired level due to several reasons.

Common cause - punctures and cutting cuts. Yes, and some manufacturers make products so thin that compressed air under its own pressure can pass through the tires. It happens unnoticed, but it is necessary to regularly get out of the car and pump the rubber. Sometimes it is not even possible to call for the station maintenanceAnd to pump the rubber need a compressor. FROM technical side The device of this device is simple:

• Metal cylinder;
• Engine and crank-connecting mechanism;
• Manometer.

From how high-quality materials and parts from which the compressor body is performed depends on the durability of the device. As you can see, the design is quite simple and operate from electric engine. The piston is common in the world more than others, they are more convenient than membrane. Nevertheless, this kind of device is classified and for such a sign: stationary and portable. Stationary are installed in the body of the car and are connected to the pneumatic system. Portable is in the trunk as an additional device and turns on only when it is necessary for the driver. A car piston compressor feeds from the battery, the cigarette lighter is used as a socket.

Construction varieties

So, the choice of an autocompressor stands between such:

• Membrane;
• Piston.

Compressors for piston tires has the main part - the compression chamber in which the air pressure creates. At the same time, it is extremely simple and does not show technical innovation. Therefore, before buying a portable compressor it is worth asking what metal is made by piston. The quality of this element is the key to the durability of the design - the stronger the piston, the more you will use the compressor.

It is worth noting that the manufacturers of compressors have a property to save on each element and use fine galvanized instead of durable alloyed. Having bought inexpensive devices, it can be found that the compressor consists for the most part From plastic parts. The physical wear of the mechanisms of such a device will be extremely quickly and cannot be fixed. Compensates such minus small cost, but this device will have to change every few months.

Automotive tire swap compressor is caused by such positive points of use:

1. The operation of the device is allowed at low temperatures;
2. High permissible power.

Disadvantages:

1. Replacing the main parts is impossible, the design of the compressor is not calculated;
2. When active use is allowed to overheat the device, so it should be resting periodically.

The membrane is somewhat different. Air hit inside and discharge there is due to a special membrane web. It should be noted that there are no driving parts in the device of such a pump, which simplifies the design. Therefore, such compressors for automotive tires They break somewhat less often and when the membrane knot needs easily on the same design. In addition, having minimal engineering skills to collect a car compressor of this type of girlfriend will not become a challenge. In this case, the power will not give way to the factory options. The pluses of such devices include:

• High degree of reliability;
• Maintainability.

To disadvantages:

• Low power;
• The impossibility of using in harsh conditions.

Principle of operation

An overview of auto compressors can not be full, if you do not mention the main indicators of this device:

1. Performance;
2. High pressure;
3. Availability .

When the average car enthusiast picks up the pump, it first turns attention to the pressure. Therefore, you should immediately dispel the myth - in cheap options for compressors rarely, when the figure of the declared developed pressure corresponds to real Regulations affairs. First of all, the performance of compressors and quality should be viewed on the box - if the pressure is more than 8 atmospheres, then this is a poor quality option.

In addition, it is worth considering the performance of an air compressor separately, it is measured in a liter of air that pump pumps per minute. Therefore, before making a purchase, remember which radius of the car's wheels on which this type of pump will be installed. If you have sport car Or need a compressor for trucks, then focus on a number of 7 liters / minutes. The device with smaller indicators will not be able to pump one wheel at once and it will have to give to rest and swing a tire in two approaches.

Power type. For this parameter, three options are distinguished:

1. Feed from the cigarette lighter;
2. Using the battery. In this case, you can install devices more power. Included such a wheel compressor has several crocodiles at once, so that it is convenient to connect to the battery terminals. When running the engine machine must be running;
3. Work from the electrical network. At the same time, they have a built-in small battery and need recharging.

The presence of a pressure gauge. Air cars Compressors for pumping tires manometer are completed, otherwise it does not check the result of the work. Manometers are divided by measurement accuracy classes. When buying it is necessary to give preference to those devices that the measuring device is more accurate. They are divided into shooting and digital. The shooter is equipped with several scales to easily monitor information when working. However, the digital version is somewhat more convenient, since the vibration, which is created when the car compressor Berkut pumped the wheels can break the arrows. The digital pressure gauge is more accurate process information and issues data with an accuracy of up to thousandths. In addition, the electronic measuring instrument can limit the pumping on the specified range, automatically shut down after that.

On this, we complete the device for tires for tires, now it is worth paying attention to the choice of the correct device.

Making a conscious choice

When you decided on the model and came to the store before buying it is worth a visual inspection and test compressors for the car. Yes, those devices that are produced by responsible companies are always indicated by the corresponding stamps on each part. Each device external species It should hint on reliability, the hull must be durable, nothing should ring when shook.

Pay attention to the automotive compressor device and at such moments:

1. Technical performance;
2. Permissible tire volume;
3. Developed pressure;
4. Wire length and plugged hose;
5. Permissible operation time without overheating.

Not only the principle of operation of the compressor on the car, but the case is important. You should not give preference to plastic options - they are short-lived. If you decide to such an option, it must necessarily be heat-resistant, plastic must be resistant to resist mechanical damage and sharp temperature changes. The same durable, as well as the body should be nozzle, so that they do not get into disrepair from time and cold and did not start passing the air. Consider that the hoses are served high pressureTherefore, the break of such a pipe will lead to unpredictable consequences.

The multitasking is also the multitasking of each specific option, because the use of high pressure pumps can be used differently:

• Purging with compressed air;
• Applying anti-corrosion liquids on the body surface;
• Padding;
• Removal of pollution under pressure;
• Pumping wheels;
• Work with pneumatic instruments.

Such additional functions are found in a large number of pumps from each manufacturer's company. This is done not only to attract a larger number of customers, but also in order to increase the versatility of the pump. In addition to multitasking, we also observe such useful moments - automatic shutdown and air pumping.

Automatic shutdown is an extremely useful feature that is used in two cases - when the pump overheating and at the request of the driver. A special temperature sensor can turn off the engine during overheating, and electronics will allow you to set pressure by reaching the pump to disconnect. Air pumping is also a useful surprise - turning inflatable circles and mattresses easier by pumping oxygen from them. Some compressors are also equipped with a lantern and a pressure gauge backlight to work in the dark.

View video design

On this review of automotive compressors ends. The proposed information will provide the concept of the device of automotive compressors and will help make the choice of the correct device.

At the mention of automotive compressors, most represents a rigine device with a hose that goes to the wheel. And what's there inside and how does it work?

Electric pumps for swing tires are two types: membrane (they are vibrating) and piston. In the first, as follows from the name, the main part is the membrane.

It makes reciprocating movements and pumps air. From the rubbing parts in the design, only a pair of bearings, therefore, in general, it is rather durable and maintainable. If the membrane breaks, it is easy to replace. Similarly arranged, for example, fuel pumps domestic cars from carburetor engines. They can be repaired "on the knee." The fundamental shortcomings of the scheme is that it is not capable of issuing high pressure and is not very productive. For pumping big wheel Such instruments are not suitable, because of what Jippers are practically not used by them, and we will no longer mention them.

Proportionality. By choosing the device, pay attention to the correspondence of its power to your requests.

The second type compressors work as follows. The air is absorbed into the cylinder, then compressed by the piston and is released in the highway, according to which the pressure can be served in the bus or in blocking. In motion, the piston is driven by a crank-connecting mechanism, and in turn electric motor direct current With gearbox. The capabilities of the system are quite simple. From the volume of the cylinder directly depends on the productivity - the amount of air, which per unit of time can submit a compressor (measured in liters per minute). And the engine turnover determine the pressure developed by the device. At the same time, the turnover is higher, the stronger the pair of piston-cylinder heats up, so they need mandatory cooling in hot weather. In addition, their durability affects dust, falling into a cylinder with air.

Food. The plug in the cigarette lighter is convenient, but "crocodiles" give a larger current

More and faster
Do I need to strive to purchase necessarily "the most powerful" compressor? No, if you are going to use it on a motorcycle, for example, or compact crossover. It should be guided by common sense. After all, high performance entails large dimensions, weight and cost of the device. In general terms, the situation with the choice is approximately so. Compressors with a capacity of up to 50 l / min, though inexpensive, and compact, but swing tires for too long. Yes, and their life is short due to constant overheating. For standard wheels of nelible all-wheel drive cars, the productivity of about 50-70 l / min is required. Well, the owners of large SUVs designed for serious off-road, it is worth paying attention to one of the more powerful models.

How much hang.
It is very important that the compressor is equipped with a good pressure gauge. Remember that it will show when influencing about 0.2 bars more than really in the tire, due to the spool resistance

Reliable. Screw the hose, equipped with the fastening of the type "Nut", more complicated. But such a fastener will last longer

Easier. Clip is put on almost instantly. But he may eventually refuse

Important note: The maximum compressor performance is indicated at a certain output pressure. In this case, various manufacturers mean different values, which is why any direct comparison of devices will be incorrect. In the characteristics of some small compressors, sometimes you can meet fantastic figures almost 20 atm. This is nothing more than a marketing trick! Really, most compressors give pressure, barely reaching 8 atm. This is enough, since the operating pressure in tires usually does not exceed 3 atm., And on SUVs hesitate from 0.3 to 2.5 atm. Although fairness it should be noted that there are models that can develop honest 10 atm., For example, American Viair.

Fresh air. For air purification in a good compressor there is a filter with interchangeable elements.

No electricity!
The electromotor of the compressor can be powered by several ways. Convenient, of course, when it is equipped with an autonomous battery, but it greatly increases weight and requires charging. The network 220 V is used for very powerful stations in stationary conditions. The cigarette lighter socket is most functional, but it has limitations on the current current, it is enough for the low-speed electric pumps. And the optimal solution for powering the compressor on an SUV or crossover will be its direct connection to the terminals of the regular battery. Yes, it is required to open the hood, but nothing burns, and you will save time on the process of pumping, using a more powerful unit. But do not forget to launch the car engine, in order not to plant the battery.

Tube not for cocktail
Choosing a compressor, pay attention to the air hose is an equally important part of the entire system. Its material should be high-quality and frost-resistant, and the length is to allow reaching any wheel. Reliable if the fitting on the nipple will be threaded. The quick-consumption clip of many seems more convenient, but it quickly loses hermeticity with frequent use.

Look in the wallet
So, considering the above, summarize, projecting them on the "financial line". Immediately we can say that compressors worth up to 1000 rubles. - These are thrown money. For a long time they will not serve, with difficulty shaking even regular wheels. Ranging from 1000 to 2500 rubles. You can already find something suitable for infrequent use on the crossover, without counting on high speed. More worthy products, of course, will cost more. Most likely, not less than 3000-5000 rubles. Going to the store, keep in mind that good models Equip air filter From dust and overheating protection - with increasing temperature, automatically disconnected for a while. And, of course, it is always better to have some power supply, strength and durability, so that somewhere in the distant "pampas" accidentally not be on the "empty" wheels.

Considering the abundance of automotive compressors for pumping tires on the market, the ordinary buyer is easily lost, so we offer an overview of the best, according to expert reviews and motorists, autocompressors 2018-2019.

Faced with small repair on the road will have to any motorist: from such things as a puncture of the wheels, it is impossible to insure. But if before the faithful companion of the driver was a hand pump, during the pumping of the wheel at the same time strengthened the main muscle groups, now there are at the disposal of motorists a rich choice of automotive compressors. And so rich that it is difficult to understand the assortment rather difficult. What is the first to pay attention to, standing at a shop window and solve which car compressor is better to choose?

The main parameters of the automotive compressor

Part of the specified parameters can be found in the compressor passport, part of you will have to be described, to determine the method of feeling:

• Performance: In this case, not only the speed with which the compressor is fully inflecting your wheels. When pumping a completely slossed wheel, driving from Hampa (ring-speaking disk holding board, you may encounter the fact that the compressor of insufficient performance simply cannot compensate for air leaks and the board will not be able to place.
• Connection Type: As we understood in the previous paragraph, we need a powerful compressor, which, in turn, is needed by a powerful engine. Accordingly increase energy consumption, so it is skeptical to relate to models included in the cigarette lighter socket - either the stated power of them is only as in the inscriptions on the package, or permanent replacement Drop fuses will become inevitable. Connecting an autocompressor "crocodiles" directly to the battery - the best wayBut only if you do not need to make out half of the car on your car to access terminals.
• Length of the cord: Perhaps the strongest disappointment in the automotive compressor can be the detection of the fact that the length of the cord is not enough missing to reach the rear wheels of the car. In addition to the length of the cord, appreciate it and hardness - with a strong stretching, the hard twisted cord will pull out the plug or "crocodiles" from the place, preferably the cable of the usual type, although it is not as easy to storage
• Accuracy of the pressure gauge: Assess the accuracy of the testimony without a reference pressure gauge is difficult, so pay attention to the right to how well the pressure gauge is read. On small manometers, the arrow can calmly overlap the divisions - ran up in a pressure of up to 0.2 bar between different wheels will be inevitable. Strive to avoid pressure gauges with double digitization: to put pressure in pounds per square inch (PSI) you definitely do not have to prevent an additional scale will be pretty.
• Duration of continuous operation: This parameter should be assessed with productivity. For example, if you have an SUV or crossover on a high-profile 16-inch rubber, a low-power compressor will not only swing the wheels for a very long time - it is also tritely overheated.