Autodoma homemade. Wheel house with their own hands: Designer photos, a phased process of work. Paul, Lower Vent

If you decide to make a car with your own hands, you will need some basic knowledge, tools, a lot of patience and even more free time. And, of course, a reliable vehicle to create a camper.

This article presents some photos of the house on wheels built by your own hands on the basis car Volkswagen.. Most of the Soviets can also be used during the construction of motorways on the basis of other cars.

Before you start it very important to read the next item!

IMPORTANT! Before the beginning of the creation of a camper with their own hands, it is necessary to legalize the implementation of such a procedure. In this case, you can prevent various difficulties of a legal nature. The rules differ depending on the country, so we cannot publish uniform recommendations on this occasion.

The first steps

Building a house on wheels with their own hands consists of the following steps:

• Outdoor work
• Internal work
• Work on water supply
• Gas and electricity
• Furniture
• Other

If the van is operated only by two people, there will be a lot of space. If you plan to travel 3 or more people, you need to consider the number of places. Remember that places should be equipped with appropriate safety belts.

How many places to sleep do you need? One option is to arrange a bunk bed for children. If you have a reserve of place under the roof, you can make a "drop-down" bed.

At this stage, you must have a clear plan for further action. Of course, you can improvise, but much easier to have a thoughtful plan on paper.

Outdoor work

The first thing to be done in the preparation of the basic vehicle- It is a thorough cleaning of the inside of the car.

At this stage, it is also necessary to consider the form of the body as a whole. It is time to deal with body damage, rust. Local or full painting Auto.

As a rule, vans have no windows, so you can think about their installation. They are needed to provide the influx of fresh air and entering sunlight inside the autodoma. The windows are of different shapes and sizes, the choice depends on your preferences and body features.

During the construction of the house on wheels, there will have several holes in the car body. We are talking about holes for ventilation, gas output (in case of leakage), exhaust gases Heaters, filling gorlovin for water, etc. Some of them can be made later, but it is much easier to solve the issue now, if you know exactly where they will.

Do not forget to apply primer in all places where naked metal appears to prevent corrosion.

Build your own autod right!

Internal work

Most likely, the wagon will be partition behind the front seats. Some partitions are attached to screws, others weld to the body. Solve the problem will help "Bulgarian".

Remember the need to use protective products. Sparks can leave unpleasant stains on the glasses, from which it is impossible to get rid of.

Begins the most interesting. The insulating layer is very important because it will protect your camper from external noise and temperature. There are many materials that can be used. The choice depends only on you.

In this case, was used material Armaflex. It should be cut into pieces and glue. The main point is the protection against moisture. If the insulating material does not protect the moisture from entering, it is not worth using it.

It is necessary to prepare insulating material, lightweight and moisture-proof, as well as a soft and flexible carpet.

For side covers, a thicker phaneer should be used, as Furniture will be installed on them.

Use glue or sealant with a large temperature range for the insulation and carpet coating on the side walls. Because the van will be exposed to both the minus temperature and the hot summer sun. Also will affect the work of heating. In the case of the use of poor-quality glue, it is necessary to redo it again after a while.

Where to begin? Start sowing an autode, ranging from the roof and ending with the floor. First, mount the insulation and facing layers on the ceiling, then go to the side panels.

Use wooden planks on the floor to equip sufficient space for isolation. Reiki are attached to the floor with the help of the appropriate sealant. Then the layer of insulation is stacked, after which it should be covered with plywood. Plywood is fastened with sealant or screws.

Remember the water supply, as well as the need for laying electrical cables and gas tubes. Wires and hoses can be paved through isolation or under plywood lids, if you already know where all the devices will be installed.

Work on water supply

The house on the wheels should have the supply of cold running water. For this, two canisters with water are installed under the sink. Submersible pump Provides water supply to the crane.

If you need warm water, extra sink or shower, the system will be more complex. You can install large water tanks in another place, for example, under the van. Support hoses to combine the entire system.

When you make an autode yourself, only fantasy limits you.

Do not forget about wastewater. You can set the appropriate tank under the car or pave the hose through the floor to merge water into the portable tank or the usual bucket.

Remember that the water used will terribly smell like in the summer and freezes in winter. Therefore, it is necessary to get rid of it as soon as possible, so the bucket can become an ideal solution.

What about the toilet? You can set one of the comfortable portable toilets.

Gas and electricity

IMPORTANT! Gas supply hoses and electrical wiring must be installed only by qualified specialists! In case of incorrect installation, they may be of serious danger. Make an autode on your own, but do not expose other people at risk.

Propane In Cepers can be used for cooking, heating, as well as refrigerator connections. You can do without it without electric stove and refrigerator as well autonomous heater Webasto.

The gas cylinder must be stored in a separate location with holes at the bottom. Why is the hole be undeporting? Because propane is heavier than air, so it will always go down.

You can even make a valve to connect the gas stove outside the car to cook food outside the van in the future.

Again, build a camper right for your own security!

Electricity Need to launch all devices designed for 12V. The system consists of a battery, charger / converter, control panel and a plurality of wires.

Do not forget about the external connector, for charging rechargeable battery Avtomoma from ordinary power grid (110V or 220V). You can also use it at home, charging acb during winter storage.

In order to determine which battery capacity you need, easy calculations will have to perform. Let's say you will use the following:

• Halogen lamps: 2 × 20W 2 hours a day \u003d 80 WT⋅ch
• Refrigerator: 45W 12 hours a day \u003d 540 VT⋅

The total power consumption is 620 VT). Now divide the 620 VT⋅ch by 12V and you will receive 52Ah. This is your daily power consumption. As a rule, the battery per 100Ah is enough for about two days of autonomous work.

Calculate, taking into account energy consumers you use. This will help you get the average power digits of electricity consumption.

Gas and electricity are very important issues that need to be considered during the construction of a camper. If you plan to send an auto toward travel away from civilization, autonomy should be maximum. Do not hurry, we carefully think over and calculate.

Furniture

In this question, nothing limits you. You can boldly realize your dreams. Make and install furniture in different ways.

Sometimes quite suitable furniture occurs on various disassembly, we advise you to search. Non-good offers sometimes appear on the Internet auctions, and the furniture is sometimes sold at quite an affordable price.

You can also design everything from scratch. Some firms sell ready-to-install parts, veneer coating. You will only have to apply lacquer (if necessary) and install furniture. You can also contact a professional who will help you in this matter.

Make a person's personnel - not too complicated task for an experienced master. But the dates of such construction can be strongly delayed due to the continuous improvement of the design. In order not to get into such a situation, you should think in advance the interior, refusing obviously unnecessary elements. This is especially important when equipped small carsFor example, when creating a house on wheels from Gazelle with your own hands.

The mobile home has indisputable advantages - comfort, comfort and mobility. Moscow is a noisy city, from which you want to sometimes leave. The owners of trailers do not have to look for a place for overnight stay, and travels become very economical. If you used to use this original housing, it was not possible to get an opportunity, you should first get acquainted with their classification.

Types of auto houses and their classification

Choosing the type of future mobile housing, one can be guided by its division by:

• kind - there are trailed, van or combined with a car at the wheels;
• class - distinguish three classes of autodomas comfort;
• trailer type - exist trailers trailers, hybrid and fifth-wheel trailers.

If everything is clear with the trailed view of the mobile house, then the difference between the van and combined auto-bodies is not immediately visible. In the first version, the residential premises is located in the car van and separated from the driver's seat.

Such an option is suitable when traveling together, when no one remains in the "house" at the time of relocation. Thanks to this design, it is possible to enter more functional furniture using a deaf front wall.

Converted from Gazelles or minibuses of the Avtomom is just combined.

Comfort class can be called conditional. So, to homes on the wheels of class A "include spacious trailers made on the chassis big trucks. Outwardly, they resemble a bus, may have folding structures, and inside the functionality they do not differ from a small apartment.

It should be borne in mind that the driver should have the right category "C" to manage this transport.

The spaces in it are much smaller, but still traveling in them convenient. What is important - it is possible to manage such a car with the rights of category B if the weight of the car or the total weight of the car with the trailer does not exceed 3.5 tons.

The class "C" indicates the most simple autoomom. It may be a small trailer or converted to a minibus. There is no separate sleeping place here - its function is performed by folding sofas or chairs. But equipping such a mini camper with a trunk-tent, folding canopy and a set of furniture for camping, you can get a comfortable stay with a minimum cost.

Similar trailers designers are also called hybrid to distinguish them from simple trailers. Separately, it is necessary to note the FIVSVIL trailers, the form of which is designed for use in conjunction with pickups. Due to this, it is possible to reduce the length of the entire caravan, because part of the trailer hangs over the body of the car.

Errors in the construction of houses on wheels do it yourself

Prices for mobile homes are noticeably "biting". Not surprisingly, the desire of the mace of the heads of families to save the budget and do it all. It is important to be wise and learn from other errors:

• it is not necessary to do all of the girlfriend - the house will have to live at least a week and you want to stay with comfort;





• it will require serious refinement of the body, the heating systems, wiring - without the skills of the car mechanic, do not do;



• if the shower and the toilet still managed to enter, do not forget about the tank for a drain - pour out dirty water on asphalt or the lawn is extremely unethical;
• it is better not to forget to make a connector for connecting 220V on camping parking, well, and the converter for 12V from the car battery.

Production of trailer with its own forces

If the difficulties are not frightened, and the desire to action is not strangular, you can try your strength in the construction of the house. And to redo the gazelle or build from zero trailer trailer - the choice is strictly individual!

House on wheels from Gazelle do it yourself

You will need a Bulgarian, a welding machine, a hand saw on a tree and a lot of patience. Phased the modernization of the car looks like this:

1. The seats from the cabin are taken, the old sheathing is removed. All metal parts are processed by a special solution that prevents the appearance of rust. Walls and ceiling are insulated with foam polyethylene, plywood sheets are laid on the floor. The entire wiring passes under the sheaving of the floor and walls, it should be thought out in advance.



2. Right in the bodies are welded frame for furniture. If you set a smooth car, you can not use a pipe as a level, overlooking the ends into the bottom edge of the window openings. After a draft welding, the frame is removed and everything is welded, it is cleaned and reappeared inside.



3. Window openings are punishable by carpet. Ceiling panels are also installed. After the interior is completed, it is possible to mount the racks under the mezzanine and mount furniture frames.



4. For the front seats, you can make a swivel mechanism. To do this, you will need anterior hub, for example, from VAZ and part of the rotary rack. The scheme is quite simple.





5. The final stage is to install furniture on the frame, the connection of the lighting, the installation of the pump for the kitchen service, the trimming of the antlesole and minor improvements in the interior. For cooking, you can put a small gas stove per single burner.



6. Instead of welding the furniture frame, you can use ready-made headsets, reinforcing them from the inside with corners and additional screws. Bold the kitchen is also needed to everything - the floor, sofa, wall. This is done to protect the furniture from the breaking during the movement along the bumpy roads.

We should not forget that such a remission of the car requires registration in REO. To do this, you need to write a statement and get a resolution from the Tehotel of the State Training of the FAI and the Protocol of an authorized organization.

Stylish plywood trailer

If there is a carbon car, sin does not take advantage of the situation and do not make a pretty trailer "drop" for overnight stays outside the city. For this:

1. Side walls of the future van are cut and attached to the base. All holes under the doors and windows, as well as to relieve the frame, should be cut in advance, so it's better to think about the drawing.



2. Shelves are collected from the furniture shield and are installed on the base. The same shelves will perform the functions of the front and rear walls of the van.



3. On the shape of the van above the shelves on both sides, a plywood sheet bent, the power frame of the bar is fixed above. One side is made lifting, opening access to the kitchen.





4. The top hatch and the roof window is cut. The entire frame is insulating, the wiring is stacked.



5. On top everything is stuck with veneer sheets. When door and window openings are cut, you can proceed to the outer painting and varnishing.





6. Installed doors, top hatch and supply and exhaust ventilation. After fixing all the accessories, overall lights and wings for the wheels, you can safely go on the journey!

And the video shows the detailed assembly of the autooma with the installation of solar panels:

Some travelers and relax lovers in nature prefer home on wheels made by their own hands ready. The choice is explained not only to the smaller cost of homemade structures - you can consider the layout and equip the interior at your own request. Before building a house on wheels with your own hands, it is worth learn more about the process of making an auto houses, decide which option is better: cottage-trailer or camper.

Original autodom

Autodoma and residential trailer

Regardless of the type of authom, there must have minimal amenities: sleeping places for each traveler and cooking and cooking area.

In addition, inside a minibus or trailer can be:

• washbasin;
• gas stove connected to the cylinder;
• shelves, lockers and other storage systems.

In the houses on wheels intended for long-term travel, there is usually a bathroom combined with a small shower.

Making an autode for himself, with their own hands, you can envisage the availability of a bathroom and everything else that may be required on the trip.

Making an autodoma with their own hands

The house on wheels is made on the basis of a van or trailer. The buses are suitable for this purpose - a spacious salon, a high roof make it a good contender for reorganization.

Before removing the trailer or van, find out the conditions for the setting of the automotive records in the auto inspection.

Autodom bus

The construction of the house on wheels consists of several stages:

• project preparation;
• conducting outdoor and internal works;
• communication device;
• placement of furniture.

First of all, it should be decide that to take as a basis: a trailer or van. The first option is more difficult - the van has already has a wall and a roof, and in the trailer they will need to be erected independently.

Maintenance with your own hands on the basis of the car

To create mobile housing, a car is used or, for example, old bus. The vehicle for re-equipment into the house is chosen based on the financial capabilities and the number of people who will live inside the structure.

Depending on the number of residents, they think over the construction of the house on the wheels, as well as its filling. To work it was easier, make up a plan.

Autodom on the basis of a cargo van

Before making an autode, you need to stock the materials and tools necessary for work:

• bulgarian;
• automotive paint;
• screwdriver;
• welding machine;
• thermal insulation;
• materials for finishing (plastic panels, lining or other);
• moisture-resistant plywood;
• carpet;
• fastener (self-drawing, nails, dowels);
• mounting foam;
• primer;
• painting brushes;
• sealant;
• metal brush.

Outdoor work

When the drawing is ready, the design is thought out, go to external work. Required:

1. Clear car body from rust and other damage. If the paint on the surfaces peeled, it is possible to consider it.
2. Make a few holes under the windows in the van if they were not initially. At the same time, cut holes for ventilation.
3. Determine the location and cut holes for the output of exhaust gases, drain holes and other communications.
4. Cove the sections of sections, plots where the paint was removed, the primer to prevent rust formation. Wait until it is dry.
5. Cove the paint outdoor surface of the van.

Autode based on the van

Internal work

If you plan to separate the cab with a residential compartment. Then the partition is mounted either by fastener, or welded a metal frame to the body with a welding machine.

First, the body is carried out with thermal insulating material. Any insulation suitable for residential premises. To fix the material on the walls, the ceiling is used by hardware, made of the same metal as the body - such a reception will help protect the car from the appearance of rust.

If the selected insulation does not tolerate contact with water, it will be necessary to additionally pave waterproofing.

Insert windows. Go to the walls of the walls. For the trim, choose moisture-resistant Phaneur. Sheets must be pretty thick to withstand a serious load - they will subsequently mount the lockers, shelves, furniture.

Works start from the ceiling. Pluging sheets there, cure walls. Next, the wooden beam is fastened to the floor with a height of the insulating material, the insulation slabs are placed between them. Fill the plywood floor, attach to Brusa with self-draws.

The salon in which the kitchen is located and the shower with a bathroom should be divided using a frame partition.

Phaneur can be painted, covered with varnish or fix carpet coating on it. The last option simultaneously serves as an additional thermal insulation. For fixing the carpet apply special glue.

The next step is the device of communications in accordance with a predetermined scheme: electricity, heating and ventilation. The cable, plumbing and gas pipes are paved either over the inner casing, or are mounted simultaneously with the insulation styling inside, making holes for the output of communications.

Furniture

Furniture for Avtomoma is selected individually. The necessary objects of the situation include:

• table with a bench for the dining area;
• bed or folding sofa;
• hinged shelves and cabinets for storing stocks, clothes, bedroom accessories;
• washing.

Since during the movement of the house on wheels, the furniture is exposed to increased load, it must be high-quality, strong, have reliable accessories and minimum moving elements. It should be verified that during a sharp turn of the locker door will not open, and the contents do not crush the cabin.

All furniture must be firmly fixed, it is desirable that it is fixed at two points: on the floor and wall.

Interior solutions in the auto house

Motor do it yourself from the trailer

Make a house on wheels from the trailer harder than to remake the car. In this case, it will be necessary to build the base of the floor, walls, roofs from zero.

For the construction of a cherry, the uniaxial autographs, withstanding the load of up to 1 ton, are often chosen. Therefore, you have to select materials for the frame, considering the weight of the future design.

The trailer-camper is emitted using a frame:

• metal;
• wood;
• sandwich panels.

The most affordable and relatively lightweight material for the manufacture of the house on the trailer - wood. It is easier to work with it, and special tools are not required for connecting items.

Vintage trailer autodoma made by hand

Frame

For the manufacture of the frame will be required:

• bar 50 * 50 mm;
• moisture-resistant plywood 10 mm for walls;
• plywood 12 mm thick for floor;
• fasteners (selflessness);
• screwdriver;
• olife, brush;
• galvanized corners;
• electrolovik;
• metal profile for roofing;
• galvanized steel (for outdoor clamping);
• silicone sealant;
• insulation.

Pre-draw the drawing of the future trailer dacha, only after that they are purchased building materials For the manufacture of the facade and the roof of the house on the wheels.

Minimum autodoma parameters - 230 * 160 cm. The height of the construction is from two meters. With such sizes inside the residential compartment, you can organize 2 beds, a dining area and washing. If there is a need to equip full-fledged housing with everything you need, then the sizes should be increased by 2-3 times.

Process manufacturing trailer-autodoma

Order of work

1. Remove from the trailer of the side.
2. Clean the chassis, paint it with an anti-corrosion composition.
3. In the presence of a sufficiently strong base of lags and the lower strapping of the frame is fixed directly on it, if it is missing, then the frame of the metal pipe 50 * 25 mm is welded.
4. Perform the lower strapping from the bar 50 * 50. Side elements are connected to each other using lags. Lags are placed at a distance of every 20 cm. Metal corners are used for their connection with the bar.
5. Covered wooden elements of olphouy in 2 layers.
6. The plates of the insulation are put in the space between lags.
7. Stip the base of 12 mm plywood, fixing it with self-draws.
8. Moving to frame racks. The bar is connected to the bottom strapping with the help of corners and screws. After that, the top strapping is performed.
9. Cover the whole design of the oil.
10. In places where windows should be located according to the plan, crossbars and racks from the bar are installed.
11. The trim starts S. inner. Phaneur is fixed on galvanized self-tapping screws every 25 cm around the perimeter of the sheet.
12. Grinding the inner surfaces using grinders. Covered with varnish.
13. Outside, sheets are treated with oil.
14. The insulation is placed in the cavity between the frames of the frame of the frame of the frame, they are cutting the frame with sheets of 10 mm plywood, which are pre-covered with oil from both sides.
15. Made the door from the bar and sheets of plywood. Installation of the door is made on galvanized loops.
16. Insert windows. A simple solution - sheets of plexiglas.
17. The house made on the wheels made with their own hands is sheathered by galvanized steel sheets. Self-tapping screws are used as a fastener, they are screwed around the perimeter at a distance of every 10 cm. The corners of the trailer are squeezed.
18. Processing sheets of sheets of sheets with each other and corners with a sealant to prevent water from entering inside the design.
19. It remains to make a roof and roof. It is necessary to cover it with a professional flooring, fasten sheets on galvanized self-tapping screws.

Internal planning

Walls, ceiling and floor are already trimmed, so they can only be painted or covered with varnish. If the size of the construction allows shower and a bathroom to be equipped with a separate room. The frame partition is erected, hang the door. All remaining space shall be divided into zones: sleeping, recreation area and eating, kitchen. It will be necessary to install outlets under the electrical appliance, it is important not to forget about high-quality ventilation for the house on wheels.

Furniture

To save space inside the trailer, we establish transformable furniture. For example, they do or acquire a folding table, a sofa bed. In the upper part of the walls, the shelves are mounted, in which things will be stored, kitchenware, clothes.

Useful little things

What else should you learn before you start making a house on wheels:

1. For the outer sheaving of the carcass of the trailed auto farm, it is not only galvanized steel, as well as a professionalist.
2. If you can not organize the ventilation system, you can cut small holes in the door and close them with a mosquito net. If there are drop-down windows, it is not required.
3. In order for the mobile home to serve for a long time, the condition of the trim is necessary to monitor, paint metal if necessary.

The process of creating a mobile home is quite laborious, it requires financial investments, spending time and strength. Therefore, proceed to it with full confidenceWhat will work out to independently develop a project and implement it into life.

The house on wheels is one of the types of vehicle, which combines a vehicle and a residential premises. We received a widespread housing in the middle of the last century.

A car can accommodate up to eight people. Every inhabitant of housing can sleep on a separately equipped bed. Also in the house on the wheels mounted a small kitchen. Of course, the availability of equipment and functionality varies depending on the model of the house, but there are many in many:

• gas stove,
• oven,
• sink,
• lockers for cutlery and dishes.

In more luxurious models there is also a microwave, grill.

The house on wheels is equipped with a bathroom. As a rule, it is presented with a relay, shower and washbasin. Later highways are equipped with a separate shower.

In the house on the wheels of the driver and passenger, there are a movable base. Thus, during the parking lots, these places become part of the living space. In the auto house can also be placed room, most often it has u-shaped upholstered furniture located in the "tail".

Houses on wheels can be divided into several types. For example, by type of construction, they may be trailed, with residential premises in a van, or combined with the vehicle itself. You can also divide them on the autoom, which are used for travel, or for permanent residence. Houses on wheels for living are more equipped and comfortable. Travel homes rarely have built-in toilets and showers and are not divided into a residential part and a cabin.

A bit of history

The beginning of creating a house on wheels is rising last century. Although, as researchers believe, there were also previously homemade versions of moving houses. These were mobile vans in carts for people who were engaged in cattle breeding and breeding horses. In 1938, Jennings introduced the world on wheels, setting a residential premises on the chassis of an ordinary car.

Categories

Avtomoma can be divided into 3 categories:

1. C-class.

Such American houses on wheels have not a lot of space and are intended for short travel. They are produced on the basis of large SUVs. For example, a driver's cabin is transformed into a double bed during the night.

2.V-class half-integrated.

The design of such a house on wheels is very similar to C-Class. The bed is fixed and located in the rear of the transport. Such a house on wheels are very popular among family pairs.

3. A-class integrated.

This type of houses on wheels, externally resembling a bus, is most comfortable. It is built on the chassis of full-fledged trucksAnd because of the large mass, the transport category "C" is attributed to the transport category. It is these autodomes - the most expensive houses on wheels.

Read also

Houses of houses with an area of \u200b\u200bup to 250 square meters. M.

The house has a fixed driver's seat with a large windshield for best Review Roads and surrounding landscape. The inner walls can be moved, thus forming various zones or additional sleeping places.

Such houses on wheels are autonomous and have large stocks of water, gas and a generator, which makes them a full-fledged venue for their inhabitants.

There are also:

• Hybrid trailers. Outside, they are equipped with retractable tents for recreation or sleep during parking on specially equipped areas.
• Trailers trailers. This is usually a small trailer in the form of "drops". The main advantage of such houses on wheels is the possibility of moving the trailer with a motorcycle technology.

• FIVSVIL-trailer. A trailer that is a little more than a trailer trailer. Such a house on wheels must be transported by a car equipped with a special coupling device.

Other names of houses on wheels

The term "Ceper" refers to classes "in" and "C", and the term "house on wheels" itself apply only to the class "A".

In some countries, the term "Vinebago" denote all houses on wheels, regardless of their class or type.

Luxury home on wheels

Exclusive models do not have competitors in comfort or price. Their design has become a new concept, making this model at home on wheels the most functional and most comfortable. Such an autode has a fairly spacious salon from best species Finishing materials.

In such a house bathroom handmade Covered with glass tiles. Plumbing made of copper, and the handles are made of crystal. Shower cab is made of onyx. Driver's cabin ceiling and armchairs are covered with pearl italian skin, dashboard Made from natural African wood. The residential part has a sofa with two electrical modules. The cabin has a bar. A stunning table from Onyx is located in the dining area.

The living part provides a small working office with a laptop computer, the monitor of which is a wall-mounted 17-inch screen. Also in the office there is a multifunction printer and a lot of drawers of a variety of destination.

The ceilings along the entire length of the house on wheels are covered with all sorts of sculptures from copper sheets, and the lamp is decorated with beautiful crystals, which is a pleasant addition to the coating of the dining area.

To fully assess the exceptional nature of this car, you need to see it with your own eyes. The description is simply not able to pass through all its luxury.

To make a house on wheels with your own hands, you need not only to explore the instructions, but also stock the necessary material.

Many do not know how it is correctly called a house on wheels. In America, the name of the camper or trailer is distributed. In Russia, such cars are often called vans or also trailers.

Photo: StructuresSvoimiruki.rf.

Mobile housing can be divided into several types: van or trailed, elevated level of comfort, hybrid or trailers-trailers. Choosing a house on wheels, you should study many options to choose the one that will suit the most.

The van is a full-fledged house on wheels. He is adapted to the car. In case the vehicle is aligned, access to the driver's place is available directly from the room. This option is more suitable for families traveling by car, as everyone can be in sight of each other.

Comfort in this case is only conditional because the best option It is considered to purchase spacious trailers replacing themselves. Externally, such a design can resemble an ordinary truck, but it is multifunctionable, and, if necessary, can be increased due to the presence of retractable elements. To manage such a machine, the driver must have the rights of the category "C".

In the class of class "in" places less, but for two it is excellent option. You can collect the trailer designer with your own hands. Such work will be much more complicated than the alteration of the ordinary bus in Avtodom, but the result will justify itself at 100%.

Article on the topic:

: Advantages and disadvantages, species, for which parameters should be selected by an authome, average prices, the main recommendations for the operation of the house on wheels, the nuances of manufacture with their own hands - read the publication.

House on wheels Price for van and details

Not everyone will be able to purchase a ready-made and fully furnished van on wheels, since the cost can reach the price level at the city. Making such a van with their own hands, you can save significantly. But the final cost depends on many factors: what a trailer will be bought to make a mini-house on wheels, which furniture and plumbing will be selected.

average price The house on wheels made by their hands from the minibus is about a million rubles. You can save, buying ex-in-use details and furniture, but you can make mobile housing more comfortable and expensive.

If the car is already there, but it only needs to make a van to it, you can reduce the cost of the entire project from 10,000,000 rubles to 200-300 thousand. Additionally, it is worth considering the amount of paperwork for leakageing the autoomom. On average, the cost of the entire package of documents can reach 50,000 rubles.

To the arrangement of the toilet room will take about 45,000, if you purchase a good cassette toilet. You can save by installing biofabik, but it is important to take into account that the last option is inconvenient in service.

Economic re-equipment of the car into the house on wheels will cost 275,000 rubles, since it is necessary to install furniture, and, as well as lay the wiring and install tanks with water. Not a budget option It starts from 670 rubles.

House on wheels: how to make a frame and floor

Before making homemade house on trailer wheels, it is necessary to specify the size of the car, since the trailer cannot exceed the width of the vehicle.

Photo: CS4.Pikabu.ru.

The easiest and budget way to build a camper on your own - use the frame of the freight trailer, to which you need to lay out a wooden foundation. Then you can make a wall of wooden bars and plywood sheets, covered with aluminum overlays. This building is a kind of cottage.

To make a mobile home look more presentable and stylish, it is worth building a house on wheels with your own hands from the bus.

Warming and trimming van

The main task is the trim and insulation of the van case. For these purposes, plywood and metal sheets are used. In the corners necessarily install aluminum lining for strength and stability of the structure.

Interior decoration and furniture selection

To inside the trailer, I wanted to be, you must take care of a beautiful finish. The house on wheels and a regular trailer can be furnished in modern or comply with minimalism.

Photo: CS4.Pikabu.ru.

Ordinary folding furniture or make yourself.

House on wheels do it yourself from Gazelle

The house on wheels, which in America is called camping, can be used both for travel and for permanent residence. Although in Russian realities, the latter is practically not possible, since there are no specially equipped camping sites in the country for refueling with water and waste waste. In addition, such a design can be used as a cafe on wheels by organizing your own business, such as a trailer for making delicious coffee.

Make a full-fledged house on wheels, you can even from Gazelles if you follow the instructions:

Illustration	Description of action
	We remove all the armchairs from the car and measure the width of the gazelle. Standard size - 182 cm
	We measure the length of the cabin and throw the layout of the furniture. We decide where the bed will stand, the table
	Remove the entire inner lining of the cabin, check the state of metal structures and, if necessary, process the agent of anti-fruner
	Remove the floors in Gazelle, remove all the extra details and process the iron special compositionsand then coated with thermal insulating material and are trimmed by an autode

Since the Gazelle car has a low ceiling, you can make an autode for temporary accommodation or cut off the existing ceiling and raise it, welding a metal sheet.

Making a van and finishing of a finished house

You can make an autode made of metal container and trailer. To stop somewhere with such housing, you need to find out in advance where the camping base is where there is no signs forbidding signs. Automotions on wheels may look modern, if you correctly pick up the finish.

Illustration	Description of action
	Collect the usual trailer for the car or buy ready already. We put a metal container on it. So that such a design has become residential, it must be insulated and furnished, but first do measurements
	We are wearing walls inside with wooden panels
	On the floor, we roll over the protective and insulating layer of automotive carpet, and then another layer of linoleum or other, brighter and light carpet
	With the help of a construction laser, we cut small metal parts to secure the retractable staircase, with which it will be possible to climb the van
	Make ramp. Connect metal profiles using special parts and weld
	Lay out the plinth inside the trailer in order to secure carpet
	Attach wooden bars in order to make a small suspension baby bed. Snorge the mini-room necessary things: table and chairs, small fridge, box for things and hanger

Interior decoration is performed according to personal needs. If there are children in the family, then you need to equip a sleeping place for them.

Internal finish with your own hands

To avoid a decent appearance and was cozy, it is worth thinking of its design in advance. According to standards, 6-8 people should be placed in one house. There should be a small kitchen, sleeping places, as well as, or, toilet.

A mobile house can be equipped with a compact shower and a beyatuette - this is the most convenient and common option. Wooden or plastic panels are used for wall decoration.

Water supply

Creating a house on wheels, it is necessary to equip the water supply system. As a rule, it is quite primitive. Two tanks are installed - one for clean water, another for collecting recycled, dirty water.

Kitchen

In Russia, the option is quite common - a cottage house on wheels. In this case, it is not necessary to equip a full-fledged kitchen with a stove, tables and a dining area. But if the trailer is created for long trips, then the kitchen will still need.

The first thing to be done is to choose between the gas and induction stove. Induction is suitable only if there is electricity in the trailer.

Heating

In the cold season, as well as when traveling to the northern cities and countries, transport must be made. In most cases, the heating system operating on gas is established, however this method There is a significant minus - hot air blows up with a loud whistle, all oxygen fuses in the room, and when heating is turned off the heating, the trailer cool down very quickly.

The optimal option is to purchase a heat gun and include it as necessary. The gun works almost silently and gives a soft, but warm air.

House on wheels: photo inside and outside

To equip the house trailer on wheels by studying various photos.

By drawing up a project, the legal nuances should be examined and properly arrange a homemade mobile home, so that it could be safe to go on the journey.

The house on wheels do it yourself from the trailer: errors in construction

You can make a house on wheels from Pazika, Gazelle or any other large-sized car. The main error that many is allowed - thinking of design during repair, and not to it.

The car-house on wheels is a complex mechanism in which all systems must be in working condition. It is necessary to take into account how many people will travel in such a house, and provide sleeping places in advance.

Another error that car owners allow, reworing old transport to the house on wheels - ignoring existing problems. It is necessary to strengthen the old and shaky design, the rust is removed, and the ceiling leaving the ceiling in advance.

Home on wheels Homemade: how to legalize the construction

Mobile home on wheels need not only to build, but also properly arrange documented. To register an autoom on wheels made by your own hands, you need to contact the Research Automotive and Motor Institute. Then, having received all the documents, the owner of the car should attribute them to the traffic police.

We will have to visit these organizations several times, issuing all the required permits and evidence.

Finally

"American Dream" is not alien to some Russian people who want to break from a spaced place and go travel in a van. This can be done by putting some amount of money and spending a certain time. For those who have no funds for the purchase of a ready-made crepe, there is a budget option - the manufacture of such a van with your own hands to your taste.

Would you like to travel in the van? If you already have suitable car, will you equip the house on wheels with your own hands or ask for help?