Secretakes on the wheels do it yourself: protect against theft. How to do it yourself, install and remove the secret on wheels of the machine's secrets on the wheels with your own hands drawings

the main / Engine

Using automotive alarm Allows Security vehicle. But due to the fact that many criminals have learned to break up anti-theft systems, car owners are more likely to put additional references on cars. One of these devices is the secret to the car from the hijacking.

[Hide]

How does the secret work on the car?

The owner of the security tool with mechanical or automatic box The gear must press a special button launching. If the system against the hijacking on the car is equipped with a magnet, then the key must be attached to it and enter the password. Depending on the type of the installed secret anti-rone, you may need to additionally turn the key. If the hijacker succeeds in hacking the security complex and the siren will not reproduce the alarm signals, it will take time to search and disable the button.

The detailed principle of operation of the secret system is considered on the example of a simple, but effective blocker:

The car owner enters the code after the engine is stopped. This allows you to block the operation of the steering shaft.
If the criminal tries to catch the car and start the engine, the motor will start. However, he will arbitrarily stop a few minutes later. This option is implemented by developers so that the hijacker could not leave far.
If the criminal finds the place of installation of the secret, then you will try to enter the code. As a result of several unsuccessful input attempts, all major vehicle systems will be blocked.
Perhaps, after that, attempts to invade the car by unlocking the nodes. In this case, the mechanisms will begin to make an alarm signals by scarying the criminal.

Canal Axius-Auto talks about the principle of functioning of the device on the example of the "Needle" model and car Range Rover..

A variety of secrets by mechanism

Between themselves, secret devices are divided into mechanical and electronic. The first option is simpler in terms of constructive performance. The second, due to the presence of an electronic component, will ensure reliable protection of the car.

Mechanical

This way to protect the car is used for different purposes:

Blocking the wheels of the car. The anti-theft is performed as a locking product equipped with a screw and nut. The point is that the device has a unique pattern and key equipped with a special print. This element is used to open the blocking.
Door lock blocks or wheels.
Devices designed to protect doors luggage compartment either hood.
Mechanisms for blocking the muffler.

Electronic

This type of blocks is divided into several groups:

secretakes on buttons for blocking work power aggregate;
motion sensors to determine activity in the car cabin or near the machine;
electric shockers for shocks of the criminal when trying toft car;
mechanisms equipped with passwords that allow you to turn off the secret button.

Types of Secretakes on the principle of action

Security agent for cars has different type Trigger and operation:

Sequence of entering the code, the password is specified by the key.
Implementation of the inclusion and disconnection of the blocking node using the code that is entered into the numbers.
Deactivation and activation of the secret of the passwords indicated by the consistent press of full-time togglers. Control regulators can be used heating system either by the car radio at certain events. For example, when the ignition is disabled or turned on sequentially several times.
Secret motion sensors. Their inclusion is made with the illegal penetration of the attacker in the cabin car. The controller does not produce its presence, but transfers the coordinates of the location of the vehicle owner. Transmission is carried out by means mobile device either through the official developer's official web resource.
Blocking the power unit when you illegally start the engine. These devices cannot track the coordinates of the vehicle, but do not give an attacker on it to ride.
Hinged type of secret to the car from the hijacking, which refers to the class of mechanical devices.
Locks, equipped with an added lirefront. If there is a car hacking and disable the secret fails, it starts to play alarm signals. This type of devices is usually connected to the battery or equipped with a built-in battery.

Auto electrician Sergei Zaitsev spoke about the varieties of secret mechanisms and their principle of action.

On the wheels of cars

The secrets of this type are represented by three species in accordance with the profile:

In the polygon housing. The devices performed in this form are simple in terms of performance and design, so they are the least safe. The number of polygon faces varies in the range from eight to forty, the number of elements data is directly proportional to the protection level. Installation of the device is carried out on special bolts located outside and from the inside.
Secret mechanisms equipped with a curly profile. This type of devices is complex in terms of constructive design and it allows you to securely protect the vehicle wheels. The profile component is characterized by a set of lines with different curvature. If the hijacker has no key, then unscrew the screw and unlock the wheels it will not be able.
Dirt type devices. In the head, the bolts are installed special holes that differ from each other in size and depth. These elements are usually located in chaotic order.

One of the most reliable types of secrets for wheels - hybrid devices that combine the advantages of figure and holes.

On the hood

The blocking device for the engine compartment is a device designed to prevent the embezzlement of the main engine elements. This type of secret is made in the form of a lock and refers to a mechanical variety. The blocking element itself is mounted away from the locking product back from the standard cable. At the other end, the key mechanism with the key itself is installed, it can be located under the dashboard or in the glove compartment. If the second mechanism is locked, then using a regular handle open motor compartment will not work.

Demonstration of the secretion installed on the hood is represented by the user Leonid Kovalenok.

On the engine

Map of locking starter node using relay

Step-by-step instruction

Manual for creating and installing a homemade secret:

In the cabin of the car, dismantling plastic panels around the steering wheel and the ignition switch.
The search for electroles, which go to the starting mechanism is performed.
Cutting in the found chain is carried out. To do this, it is gently removed from the insulating layer from the cable site that goes to the starter. Contact elements from the transceiver are connected to it.
Requires a radio receiver. It is important that it is reliably fixed in order not to vibrate while driving. Place on the conductor, where the device was connected, it is necessary to exhibit.
At the final stage, diagnoses the correctness of the secret of the secret. The radio transmitter bundle includes a device for unlocking and closing electrolyinium. The chain should recover when the driver is suitable for the car.

User Dmitry Bondarchuk talks about independent procedure Manufacturing a secret mechanism to prevent hijacking.

How to install a secret?

You can put on your car different variants blocking devices. But the easiest way is to install blocking screws on the wheels.

What do you need?

To fulfill the task, you will need:

drill with a blank;
working screws, for example, can be taken from the vase;
wireless relay;
multiple wires for connecting.

Step-by-step installation instructions

Secret Blocking Installation Guide:

Using a drill with a blank, you need to make three holes. They are drilled so that they are symmetrically relative to each other. After the hole is ready, carving is done.
It is recommended to make another well, but its diameter should be greater. The hole is equipped with carvings. At this stage it is better to turn to a professional turcarriage.
Installation of bolts into the hole on the wheel disk. Fastening elements need to be highly fixed in the rim.
To ensure a sequential click key is made electrical system. You will need a wireless relay.
The component is installed on any section of the rugway line. Installation must be performed by a plus output. When carrying out the task, it is necessary to take into account the nuances of laying standard electrolynees. Cable from the wheel block are displayed in the interior of the car, in the area dashboard Or another place on the torpedo. To ensure the hidden installation, the ends of the conductors can be removed under the control shield or in the glove box.
Then, follow technical managingwhich comes with a secret mechanism, the electronic part of the block is installed. In the place where the wires are displayed, the switch is installed, it is securely fixed. Connection is performed in accordance with the scheme.

MOS-OLIMP channel on the example car Honda. Shows the process of mounting the touch block.

Advantages and disadvantages

Pros characteristic of blocking mechanisms:

Ensuring an additional level of vehicle protection. If the car is equipped with a security system, the installation of the blocking device will become another obstacle for the attacker. Additional protection is characterized by a low cost.
Efficiency of the device. When you try to disconnect the secret mechanism, the criminal will lose precious time. As practice shows, the attackers leave the car.
Branded devices connected to the machine power grid almost do not consume electricity. Therefore, with the problem of discharge, the user will not encounter the consumer when the battery is partially discharged.
Installation of secret blocking mechanisms is possible on any vehicle model.
Reliable protection. With incorrect Introduction, the code is blocked by all car systems, the work of which is needed to start and move the machine. Depending on the device model, the failure of the mechanisms may occur with the incorrect input of three incorrect codes.
The absence of the ability to intercept the signal, as in the case of a security complex.

According to the reviews, the deficiency of the secret is one - it cannot guarantee full security car. If the criminal is experienced, then he knows about possible places setting the buttons. Some attackers with hacking pricks the armchairs.

How much is the secret against the hijacking?

The price of the device depends on the type of block and its manufacturer.

Installing a bolt-secret - a fairly effective way to protect the wheel of a car from intruders. To unscrew such a bolt, you need a unique key that owns only the owner of the car. But if the original tool is lost or forgotten at home, even the owner has a problem, how to remove the secret from the wheel without a key. It is not necessary to address this issue to contact the car service, where for the service will have to pay a fairly decent amount. There are several ways to independently unscrewing secret bolts.

What is a secret, and why it is installed on wheels

Theft of automotive wheels is the most real business that flourishes in modern conditions. Car owners have to confront such "merchants". That is why the so-called "Secret" appeared on the car accessories market.

Without a special key, the attacker will not be able to remove the wheel

This is a set of nuts or bolts that are twisted from the wheels only with a special key included in the kit. The head bolt with an unusual configuration is installed on the wheel instead of one or more standard. After installing it, unscrew the wheel without the original key it is impossible.

Varieties

The difference of the secret from ordinary wheel bolts is a non-standard head profile. Depending on its shape, all the secrets are divided into four main types:

Simple models with a profile in the form of an irregular polygon with the number of edges from 4 to 40.
Models with a figure profile consisting of drawn lines of various shapes.
Pershot - have several holes of different depths and diameter. This type of secret is considered more reliable compared to previous options in terms of the selection of the key.
Combined models. Bolts with maximum reliability combine a holey and curly profiles.

General view of a bolt-secret on Audi car

Methods of removal of secret

Unscrew the bolt secretion with a special film - a minute case: the form of profile and key is ideally suited to each other. But if the key from the acquired set of lost, the problem with the removal of the wheel arises already at the owner of the car.

You can try to pick a key to the bolts purchased in the usual automata. Inexpensive Chinese kits have only a few combinations, therefore, a passing several sets, you can find the right key to the wheels on wheels. Specialists do not recommend using Chinese beats protection bolts, because the attacker can purchase several sets and pick up the appropriate key.

There are several removal methods without a key, however, most of them lead to a breakdown of the bolt itself

With sets purchased in foreign stores, such a focus will not pass. To remove complex models, one of the following methods are used.

Relief

The essence of the method is to loosen the secret of the tight and releasing the rest of the bolts. Sequencing:

All nuts on the wheel are tightened as stronger as possible to remove the load from the secret.
The car is lifted by the jack in such a way that the wheel with the secret does not concern the earth.
The secret is cutting down from all sides so that the bolt is loosened.
The car is lowered so that the wheel falls on the ground.
From the wheels, unscrew all the bolts to keep it only on the secret.
Again raise the car by jack.
The wheel is loosened with hands until it starts fluid on the hub.
Spin all the bolts to remove the load from the secret and break it even more.
The secret after these manipulations is unscrewed by hand. If the bolt has not been unscrewed for a long time, and he "baked", all manipulations will have to repeat.

It is important! Before twisting the secret, it is necessary to treat it with penetrating machine oil. Popular car enthusiasts WD-40 liquid for these purposes will not suit. Penetrating oil is a rust, holding the bolt, and then it will get out without much effort.

Using the end head

To remove the bolt, this method will need:

The end head is a bit of smaller diameter than the head of the secret;
Dynamometer key;
A hammer;
Standard bolt;
Screwdriver.

The sequence of actions is as follows:

The end head with a diameter for half a million meter is less than a bolt on it with a hammer. It turns out that the secrets are usually made of soft metal. As a result, the soft secret takes the shape of the face head.
Install the knob (dynamometric key) on the head and start to unscrew the secret bolt. According to the laws of physics, the lever helps to influence the bolt with greater force. It is advisable to not overdo it and turn the key slowly with periodic stops. The main task is to move the secret from the spot, then it will be easily unscrewed.
An ordinary bolt is installed in place.

Twisted secret remains in the end head. They knock it out with a large scolding or chisel installed in vice. You can take out the secret, slightly screwing it into your former place. The degree of spinning should be such that then you can unscrew the bolt with your hands. The end head in this position is loosened and chopped from the secret.

It is important! If the car is expensive alloy wheels With the secrets installed by manufacturers, trying to remove them on their own. It is difficult to remove such a secret, so it is better to contact the masters of a hundred.

Using an internal extractor

Conical extractor - tool for extracting broken studs and bolts. It can also be used to remove secret bolts. The procedure for the use of this tool is as follows:

To insert the extractor, the opening of the corresponding form and size is drilled in the secret.
The extractor is scored into the hole, and the bolt is unscrewed with it.
Capturing an extractor with a gate, rotate it clockwise. It is necessary to twist smoothly, without jerks, otherwise the carving will break, and without the help of specialists, it will not work off the wheel.

To remove a broken hairpin or bolt, a tool called an extractor, which can help and in the case of a lost secret

The main problem of using this method is the selection of the appropriate drill material. If the secret is made of raw metal, it will suit the drill for high-speed steel. For hardened steel, used swells with winning tips. So that during drilling the pen is not broken, the head of the bolt is abundantly lubricated.

Production of a new key

This method is suitable if there is a high-class specialist who is capable of making the key on the cast. The work is quite complicated, but the method will allow to use the secret in the future, as well as completely eliminate the risk of damage to the disk, tires and wheel hubs.

For the manufacture of duplicate make plasticine cast from the head of the secret. So that the plasticine does not stick to the head of the bolt, it must be pre-lubricated with machine oil. The resulting cast should be attributed to the wizard, which will make a new key on it.

Exotic ways to extract the secret

The most unusual version of the bolt extraction is freezing with liquid nitrogen. The impact of ultra-low temperature will give metal fragility, so the bolt is simply broken up with a hammer and removed in parts.

When performing freezing with nitrogen from the can, you will have to show supervision and get exclusively on the head of the secret. There should be no nitrogen to spray on other details and the nitrogen disk. After breaking the head, the threaded part of the bolt is easily unscrewed from the wheel.

How to unscrew the secret in the auto repair shop

Masters service station use to dismantle the secret of the "Dedovsky" method of welding on her bolt or hexagon suitable size. To save the disc often from the inside weld the piece of the pipe, and the nut, bolt or hexagon.

One hundred more secrets are most often removed by welding

When using this method, it is important to correctly select the electrode, otherwise the seam during welding will turn out to be fragile and during the unscrewing of the bolt will break the bolt. Without having experience, it is not recommended to use a similar method. The minus of such a method also consists of an irrevocable loss of the secret, although if the key is lost, it makes no sense to keep the bolt.

It is important! Sometimes the secrets are made of the material to which it is impossible to privar.

Video: How to unscrew the secret without a key

Common avto owner errors

Using the advice of "folk craftsmen", some car owners are trying to solve the problem radically. Such methods lead to unpleasant consequences.

Cut bolt chisel. The secret of such a barbaric way will be removed, but at the same time the wheels will be damaged.
Collapse by gas key. Sometimes this method works on stamped discs. But most of the manufacturers of the secrets learned to defend themselves from attempts to unscrew the bolts with a gas key. The bolt is installed a special rotating ring that prevents the capture.

It is important! Inappropriate actions when removing the secrets may not decide, but only aggravate the problem. If the bolt was damaged, but did not succumb to, it is not worthwhile. It is better to immediately contact the specialists in the car service.

Any problem with the car is easier to prevent than subsequently look for ways to solve it. In order not to take out a secret from the wheel without a key, it is worth thinking of a reliable place for its storage. It is desirable to purchase a special case that is attached to a balloon key. Required tool To unscrew the secret will always be at hand.

Non-standard fastener connectors allow reliably to protect the car from unauthorized disassembly. The secrets are removed from the removal, but sometimes they act the main reason why it is impossible to quickly replace the wheel on the road. Knowledge, how to unscrew the secret on the wheel without a key, will make the procedure for removing the wheels easier and prevent damage to the disks during the dismantling process.

For more information on what is and how to install it, read in the material of our author.

Depending on the configuration, the secret is divided into several varieties.

Asymmetric. The head of the bolt usually has a non-standard hat, which can consist of a figure with 3, 4, 5 angles.
Eccentric. Several round shape profiles and different sizes are in each other. Circles can be shifted for a certain distance from the central axis.
Drychatuyu. Several holes with the same or different diameters provide reliable protectionBut finding special keys to order for such secrets are almost unrealistic.
Figured. The figure depicted on the Hat has small recesses that only a specific key can enter.
Combined. Secret bolts on wheels with several degrees of protection and combining 2 or more element.

Since the secrets are installed with a certain goal, Most often another type of protection is mounted - shelter. The washer prevents the promotion of the secret to foreign keys. In almost all factory sets of secret bolts, shelter is attached, but if it is not, it is better to buy and put it.

What instruments need

In the absence of a key for a secret, you can use the standard set that implies:

end heads and key for them;
a hammer;
score;
extractor;
gas key;
welding machine;
chisel.

Depending on the selected method of dismantling the secret, the corresponding tool is selected. For the secrets that were quite recently delivered and have a relatively standard drawing, there may be conventional keys. If the secrets on the wheels are strongly accuited, they will have to dismantle them only with additional equipment. It is important not to forget when performing work about the safety of others and yourself.

Ways to remove the secret

There are several ways to dismantle secret bolts. Not all of them are characterized by safety and ease. Most. simple way He appeals to the service center, but the cost of work in it can cost much more than the entire set of fasteners on the wheels. If there is time and desire to do everything yourself, you should try to dismantle the secret without a key yourself.

Method of hacking all bolts

This method is suitable only for those secrets that have been screwed quite recently and have no shelter. In other cases, the efficiency of the method is very low, therefore it does not deserve attention. To unscrew the secret, you will need to reset the usual bolts several times. It is better to use a dynamometric key, but if not, you can do without it.

The method includes several stages.

It is necessary to tweak the nuts and bolts on the wheel. You don't need to touch the secret.
The car rises with the help of a jack to a height on which the wheel will rise above the earth.
Next, you need to catch up on a secret bolt from all sides and lower the car to the ground.
All standard bolts must be unscrewed.
After the wheel began to be fastened with just one secret, the auto raise the car with the help of a jack.
The secret of the secret is recommended to apply WD-40 or any other similar composition.
The wheel must be slightly digging on the hub.
Further, all bolts and nuts are swirling again to the place with a maximum effort. For this action, it is better to use a dynamometer key, as all mounts must be tightened with the same force to prevent skew.
If the secret is not very encouraged to the disk, then the first time should turn out to be removed by its hands.

In the case when dismantling is difficult, it is worth repeating the procedure 2 - 5 times. If even after 5 times the result is not, then it is worth thinking about changing the way of removal.

Dismantling with extractor

This method is effective in 80 - 85% of cases. Save a special bolt will not work, but no sense in it, since the key is still absent. Due to the fact that the extractor has a reverse thread, the process of the duck is quite simple and fast. The extractor must be knocked out the hammer to the bolt itself and with the help of a balloon wrench to unscrew the secret. Minus this method It is that, in rare cases, the head can freeze into 2 parts and the dismantling will somewhat complicate.

Welding

With the help of a welding machine, you can screw the bolt to the secret, which will help unscrew the fastener. Some manufacturers specially make secrets from a special alloy, which is not amenable to welding by household semi-automatic. In this case, it may be necessary to search for argon-arc welding or other way.

When welding work, it is necessary to prevent sparks and splashes to the car itself and rubber. For this, the wheels can be drilled slightly wet dense textiles. It is also recommended to throw a cover from dense instextics tissue. After the seam hardened all parties, you can try to unscrew the item. Sometimes it may be necessary to lubricate WD-40 and other materials.

Another popular way is the use of a gas key. The method is suitable only for convex secrets. To begin with, you can try to use the key without changing the bolt design.

If the tool greatly slides along the cap, then it is necessary to cut the face for a more dense contact of the key and the surface. Cutting faces can occur with a grinder or a file. It is more convenient to use the power tool, but if there is no confidence that the sparks will not damage the body and windows, it is better to use the file.

This method is suitable only for experienced masters or professional turdes. The method does not suit the secrets in the form of nuts. In the bolt thin drill it is necessary to make a hole in which the screw will be screwed. It is important to remember that the thread should be opposite towards the secret. It is assumed that during screwing the bolt, the secret will be turned out. If the threads will coincide, the secret bolt will be twisted even the tight.

With the help of a drill, you can try to drill the whole secret, but for beginner masters, this task is quite complicated.

If there is no confidence in the accuracy of work, it is better to refrain from drilling, as this can break the threads in the seats.

Production of duplicate (cast)

If the secret was made on special order, then there is a high probability that the keys duplicate can be made in the same place. Some turaries are taken to make a duplicate key keys even with a complex configuration. In order to take a picture, you can use various plastic materials.

Every car enthusiast, when buying new carFirst of all, it wants to take care of what His "swallow" did not bother. For this, every day, on car markets, You can see more and more different devices that prevent car hijacking or theft of its details. The secret can be deservedly called the most relevant and popular option for protecting the car from thieves. In this article we will tell you how to install, do, and take off the secret on your own, not referring to the specialists.

The secret is the most effective method of protecting the car from the hijacking and is represented in a wide variety of variations. For example, it can be a hidden button that blocks a fuel pump, a starter or a hood lock, which is able to exclude vehicle to theft, as well as, secret nuts or bolts that prevent the wheel abduction.

But, whatever the secrets would not be, they act equally - specialized devices block the movement of the car and without the necessary key or pressing certain hidden buttons, no thief will not be able to start and sneak the car (or steal its details), regardless of his knowledge and Attached efforts.

Often, they set them into the hidden places of the car, for example, in the niche of the instrument panels or under the hood. This is due to the fact that if the thief finds a secret, he can neutralize it. Undoubtedly, it will take a lot of time, but still not worth the risk.

Options Secretok

Anti-theft secrets are mechanical and electric.

Mechanical secrets are not allowed to unscrew and kidnap the wheel, without having a special key, and electrical - do not allow you to start the engine of the car without certain acts of the driver.

Most criminals cannot understand why the car does not start, and leave the crime scene. But, even if the attacker lets about the presence of a secret, then it will have to spend a lot of time and effort on its search and elimination. You should know that the main advantage of the secret is its uniqueness and lack of mass production. Because if a whole series of identical devices is published, then the solution is identical. Thus, an attacker will easily impair your defense if it used to deal with a similar mechanism.

Electric secrets

Such adaptations are effective even in cases where the attacker kidnapped your keys with a key chain from the alarm. They are quite different, depending on control algorithms or service functions:

1. Meeting button pressed or multiple buttons.
2. Settings, controlling the hood lock.
3. Properties to which the siren is connected.
4.Mochrooms in which motion sensors are installed.
5. Definitions that have limited time to enter code.
The huge advantage of electric anti-theft devices is their inability to read by special software devices, which have long been used by professional hijackers.

The simplest example of an electric anti-theft device can be called a hidden toggle switch, which is responsible for the rupture of the power supply chain or fuel pump.

Secretakes do it yourself, options for settings of the secret

Make a secret personally can every driver, using his fantasy and trick, and, thus, bring to zero the chances of the hijacking of your car. Here are some options for making secrets alone:

Option number 1. Install the toggle switch in the most hidden location of the cabin and attach it to the two ends of the starter drive (or the carburetor). If you build several similar togglers at once, you will win a lot of time when you try to hijack the car.

Option number 2. You can buy a factory secret called immobilizer. It is mounted on one of the electrical chains involved in the operation and starting the engine.

Option number 3. On the wires leading to the carburetor and starter, you can install a radio transmitter. It must be hidden as far as possible, and when approaching it, the circuit will automatically close. Minus - such a transmitter should always be worn with you.

Option number 4. Very effective is the remote overlap of the valve exhaust pipe. At the same time, the intruder will turn out to start the engine, but it will catch up for a minute. The attacker will decide that the car is broken and leave it.

Option number 5. You can install an additional latch, it will block the gearbox or steering wheel.

Option number 6. The most effective option will be the creation of a specialized system, which will consist of several relay blocking circuits and will have complex algorithms to affect the toggle switch or the button. That's just here you need experience, knowledge and professionalism.

Wheel secrets - protection of wheels from theft, how to put and how to remove

Although electric secrets are more popular, but also mechanical devices should pay tribute, since no one and nothing can protect your wheels as efficiently as they. Special nuts or bolts are very easy to install and do not make much difficulty, because they are mounted using an individual key. Each separate secret, which is attached to the wheel, has a unique pattern displayed also on the key. It must be kept in reliable placeTo exclude a loss. Otherwise, you will not be able to change the wheel yourself in your car.

Important Tip: Before twisting the secret, you need to lubricate the thread. Often, the twisting of such devices is done with the help of a gun, and a strongly tightened nut drains to the thread. Even if the drawing is damaged on the key due to a tight landing, then, with a lubricated thread, the secret will easily turn off.

If you have lost the key or he broke, you will have to make a lot of effort to remove the protective device. However, it is still possible. Best patience and proceed to work.

To begin with, try tightening and letting bolts fixed on the wheel, thereby loosening the secret. Tighten the nuts on the wheel as much as possible, this procedure will significantly reduce the load on the protection device. Next, we raise the wheel with a jack and knock on a protective bolt from all sides. Lower the wheel.

The subsequent stage will be the twisting of all bolts, in addition to the secret. We leave only a secret bolt tightened, we pin down the wheel with a jack and tent it on the hub. Then we again twist the bolts and nuts as much as possible. However, you need to fasten them symmetrically, to avoid chasing the disk. Well, now you can try to unscrew the secret.

If for various reasons, you have nothing left, you can use another way.
To do this, it is necessary to choose the head that is most suitable for the diameter. With the help of a sledgehammer, you feed it on a secret bolt and trying to rip the gate. Often it solves the problem - the protective device is removed, and the wheel is easily unscrewed. Instead of sledgehamps, you can act and other way, you can take welding and screw the ordinary bolt on the head of the secret.

Wheel secrets for disks, how to put and how to remove

If you have alloy wheels, then you can use semi-automatic or automatic welding and clean the disk asbestos. However, welding helps only if the secret is made of high-quality materials that in our time there is little likely.

In fact, there are still many options for removing the secret, but compared to those described above, they are less effective, and some of them are generally useless. However, if you tried all the ways, it did not work out the secret, you should not torment yourself and the car. You can always contact the workshop where all the necessary work will make instead of you, and, while, very quickly and efficiently. Thus, you will save time, but do not forget that it will cost money. Good luck and God to help you.