Friends, let's deal with: Do I need it, the birth, wash? After all, the engine is hidden, reliably under the hood, and no one sees it. Is that harsh and even more dirty autoslese during repair

My advice is necessary! Not so often like a body or salon, but the engine is useful. Personally, I chose a frequency for myself: one, maximum twice a year. Most often, I do it in the fall, because in the Siberian region the engine is more dirty in the summer, and in the winter is preserved clean.

So, first, a clean engine is just nice. I do not know who, but I am pleased, opening the hood, see a neat, well-kept engine compartment.

Secondly, a strongly polluted engine will not allow the state technical inspection. Such a car can simply deploy and send to the sink.

Thirdly, it is better visible on the clean engine. But the sooner the malfunction is noticed, the easier it is cheaper to eliminate it.

Fourth, repair a clean engine and easier and more pleasant. Eliminating dirt particles to the internal cavities of the engine and attachments are excluded.

Fifth, a thick layer of dirt on the engine is, in fact, the fur coat. In the fur coat, the engine is hot. And the engine overheating can have extremely unpleasant consequences.

Sixth, the same fur coat is also not a bad conductor who provokes unintended leakage of electricity. In particularly launched cases, the embarrassing and interruptions in the engine are secured.

Finally, the seventh: items 5 and 6 jointly provide an increase in the fire hazard of the engine compartment. I would not like that at one fine moment all this oil-gasoline film flashed from a random spark.

So, figured out - it is necessary to wash, not often, but regularly. Question the second - how to wash? The thing is that under the hood there are many "gentle" places that are afraid of the aggressive effect of the water jet and moisture itself. It is electrical equipment, wires, contacts and connectors, factory stickers, hood insulation and much more. So wash the engine, unlike the body, apparatus high pressure Not recommended.

The correct washing technology may be like this:

1. Clear cellophone and scotch nodes that are afraid of moisture: battery, generator, engine control unit, fuse block, distributor, wires, electrical connectors;
2. Nonsense chemistry for washing on the entire space of the engine compartment, wait for the time;
3. Make a foam of lightweight water, it is possible from a washing machine, but at minimum pressure;
4.If somewhere dirt remained, repeat the procedure for individual parts of the engine;
5. Accept the cellophane, dry the engine with compressed air, especially cavity and electrical equipment;
6. Purchase the engine and make sure that it is sustainable.

And in conclusion, a few more tips:

It is best to wash the engine on the sink. Now most of the miles provide such services. However, make sure that the washers know how to do it, otherwise there is no problem. It is useful to be near and control the process.
For self-sinking engine, you can use special chemistry purchased in any automata. Instead of chemistry, Profam 1000 or Profam 2000 cleaners are well suited. You can use brushes. different size For cleaning hard-to-reach places and scrapers to remove strong contaminants.
Wash the engine washing powder or liquid type FAIRY- is useless. Saloar, gasoline or kerosene - dangerous.
If there is no compressor, you can dry the engine with a vacuum cleaner or pump.
It is better not to wash the engine at negative temperatures overboard. Moisture, instead of evaporating, freezes and can interfere with the normal operation of the engine.

Car owners are divided into two types: those who are washing the engine, and those who do not think about it. But there are cases when you have to think about the need to clean the engine compartment from oil and dirt. Therefore, in this article we will understand whether you need to wash the motor and how to wash it correctly if necessary. As well as. Consider how to wash the car engine, as well as all the pros and cons of this.

Pluses of washing of the engine compartment:

Dirt, and especially oil pollution can affect the efficiency of electronics and wiring. Due to the large mud cluster impregnated car Oil, Circuit or overheating of the wiring can occur, which will result in ignition (extremely rare case). But with a clean engine compartment - you can completely avoid this.

With a very serious degree of pollution, the engine heat exchange with the environment is deteriorating, which increases operating temperatureAnd the engine begins to work with an increased load, while the mechanisms are accelerated.

Oil pollution under the hood is a flammable material that does not contribute to the safety of the car.

When selling a car, washed motor compartment, adds odds to good deal. The vehicle view of the car plays an important role in selling.

Complicated visual inspection Engine during primary diagnostics. When the motor is badly contaminated, you can not notice new oil drips due to gasket or seals. This will lead to serious consequences for further operation.

Cons Motor compartment sink:

It is necessary to carefully use aerosols to clean oil pollution on the engine, as they are flammable, and with inaccurate circulation, you can make troubles.

Especially foreign cars can be badly transferred by the effects of wet engine washing. Water enters electrical equipment and microcircuits of complex electronics. This fact may lead to serious breakdowns, even with careful protection of responsible places.

It is necessary to choose a professional car wash on which competent staff is working. Having knowledge and experience in the sink of the podcast space.

When the engine washing at home, an increased chance of poor-quality drying appears, which can lead to numerous closures in the wiring of the car.

Note that most automakers are not allowed to wash the car engine, and recommend it only in exceptional cases. So everyone possible consequences And risks, the car owner accepts. And the decision on the need for car wash, only the car owner also takes.

The following is offered a video on the topic: "Needed or not, wash the car"


How to wash the engine

Here we will try to describe detailed schema Washing of the boost space, since not every car owner is familiar with all the nuances and with the procedure in general. Also, we will discuss some methods and chemicals to help bring the car engine. The process itself cannot be called easily, and some conditions must be performed as accuracy according to the instructions.

Before the engine washing procedure, it must be heatured at least 40 degrees Celsius, and the entire process is carried out on a muffled machine.

Blocks of alarm and air intakes must be closed from water from entering water.

Also, all electrical equipment and battery are closed from possible moisture.

For cleaning, it is necessary to use specialized agents to avoid negative influence on rubber elements.

The means for cleaning complex contaminants and oil spots is applied to the entire engine, and is left for some time to interact with contamination. After, the pumproom space is thoroughly washed with clean water. If necessary, you can repeat the procedures.

After, all protective coatings are removed from electrical equipment and air intakes.

The engine compartment is thoroughly dried with a jet of air under pressure, you can use the compressor.

Only after careful drying, you can start a car, and check the performance.

And the final stage is removed all the flows of water.

In the process of the engine washing, you need to pay special attention to the motor cylinder block and the pallet of the crankcase. Also worth cleaning well from dirt high voltage wires, To avoid breakdown on the mass of the electrical spark. It is worth noting that the most best result Opened when washing the car on the overpass when there is a convenient way to get to the bottom of the car.

Chemicals for engine cleaning

The most important moment in the engine washing is an application. specialized funds for this. Remember, the use of powders or other household funds is unacceptable, as they can negatively affect the rubber parts of the car in particularly important places.

Also, you should not use the "Dedovsky" methods using diesel fuel or gasoline. Not only nasty smell In the cabin you will continue for a long time, and the first hour after cleaning from the working motor will go white smoke. So more, gasoline pairs can ignite from any spark. Such methods are extremely unsafe, and should not once again risk themselves and their car.

It is worth clarifying that the used equipment for washing the engine should not have a strong water pressure. This can lead to some malfunctions and moisture getting into unnecessary places. For engine drying, it is best to apply a compressor with a receiver or a compressed air cylinder. When drying the engine, it is necessary to pay special attention to electrical connections and other contacts to avoid possible closing electrical equipment.

Engine washing on special service

This service can offer some stations of maintenance or car wash. With the unwillingness or impossibility of self-sink of the boost space, you can refer to those skilled in the art. But it is not necessary to turn to the first you caught, it is better to work hard and find proven masters, after which there will be no malfunction in the work of the car.

Before the sink itself, find out the masters, how exactly they are going to wash the engine, and pay special attention to the use of high water pressure devices. The use of such aggregates may result in serious consequences. A stream of high pressure water can erase some inscriptions on the details of the car or damage the insulation of the hood. Also, water easier falls into hard-to-reach places, and can cause unwanted consequences in the relay or control unit.

Therefore, it is possible to give an accurate answer that the use of high water pressure during the engine washing is categorically undesirable, it can lead to serious problems in the future.

Also. There are many opinions, on the topic of the need for a car wash, which is on warranty service. If a problem occurs, there may be a situation that the car will not accept warranty and you will have to pay for repair. But if such a need arose, then use the company a hundred that will provide documents for the procedure conducted. And also, be sure to observe the sink process, it will increase the quality and accuracy of work.

Features of the washing of diesel engine

Washing diesel engine Even easier than gasoline. In this question, it is much more reliable and difficult to damage it when washing. The greatest trouble with it can only happen when using a large water pressure. In this case, some hoses can fly, including fuel. This can lead to a trusting of the system or the water getting into it.


Electrical protection is similar to all other vehicles. And with the high-quality drying of the boost space with the help of compressed air, nothing to worry about.

Output

As mentioned above, automakers are not recommended to clean the engine compartment, due to the possible moisture ingress in electronic systems car, which will lead to complex and expensive repair. But if such a need arose, or is held pre-sale preparation, It is necessary to approach this responsibly, and comply with all the cleaning technology of the motor compartment of the car.

In the event that you are resorting to the services of outsiders, it is necessary to carefully choose the maintenance station or car wash, which employs qualified personnel, and providing payment checks.


The main thing is responsibly referring to this procedure. Indeed, with poor performance, there may be serious consequences in the future if they do not appear instantly.

Any car enthusiast is regularly washes its car, as the net body has aesthetically pleasant appearance and less susceptible to the corrosion process. Over time, all owners of the car get a question of the engine washing for cleaning all the dirt that has accumulated under the hood. The opponents of this procedure are not harmoniously guided by the principle of "no harm", which is due to the capriciousness of electrical equipment during contact with moisture. But the arguments in favor of washing are much more, it is possible to do and need, but in compliance with precautions.

To wash the engine and do not kill the car, carefully examine the recommendations in this material.

Why wash the engine and motor compartment

A good engine with the absence of oil and coolant fluxes needs a periodic washing based on the following considerations:

  1. The engine without dirt is not inclined to overheating. Dust layers serve as a heat insulator that creates an excess load on the cooling system.
  2. Clean engine easier and more pleasant to serve. Replacement at the oil service station, spark plugs, filters or technological fluids with a dirty power unit can cause careless attitude towards the car and reduce the quality of its work.
  3. The dirty motor compartment is more fictional. There are cases when the oil appears on the engine and other parts of the compartment caused ignition due to the ignition of combustible vapors from the spark, overheated or damaged exhaust manifold, breakthrough exhaust gases.
  4. A clean engine immediately allows you to detect the place of the drift and quickly eliminate the problem, without waiting for its exacerbation.
  5. When selling a car, the probability is faster to find the buyer, having a clean engine, above.

Watch the material of the progressant on how to choose a car vacuum cleaner and what manufacturers can be trusted.

The refrigerator bag will certainly be useful to you on long journeys. How to choose it - see here.

Preparation for the engine washing

Before starting the procedure for washing the engine compartment, certain preparatory actions are performed to prevent the negative impact of moisture on the wiring, electrical appliances sensitive to the wetting parts. Procedure Next:

  1. Disconnecting minus battery terminal.
  2. Dismantling protection of the engine compartment.
  3. Protection of sensors, connectors and wires with scotch joints and polyethylene film. A good effect is given water-repellent aerosols, which are processed by connectors and electrical contacts.
  4. Disconnecting parts and nodes that interfer access to the engine.

Than to wash the car engine at home

When choosing a detergent for the engine, it comes from the density of the location of the aggregates under the hood. In simple and relatively old machines, it is not filled too tight, which allows the use of vials having a manual sprayer. Such a design provides accurate meal dosing and saving it. For new cars, aerosols are suitable for new cars, allowing you to process all hard-to-reach places.

In automotive cosmetics stores there are concentrated detergents. They are not too convenient to use, but they are indispensable with strong pollution, allowing it to get rid of the large layer of accumulated mud at once. For the engine washing, it is prohibited to apply the means intended for the body due to the content of acid damaging metal parts. The use of diesel fuel and gasoline is unacceptable, as it threatens with instant ignition in the engine compartment.

See which exterior engine cleaners are better coping with their work:

How to wash the car engine yourself

The engine washing is carried out in the following ways:

  1. Installation for washing under pressure. This method is not the best, since a powerful water jet is able to damage the insulation on the hood and knock the stickers with information in the engine compartment. Also, water under pressure penetrates the inside of the connectors, where he does not dry out for a long time, provoking the refusal of electrical equipment, and causing corrosion.
  2. Washing a pre-applied detergent composition of a weak jet of water or watering from the bucket.

To carefully remove the deposits of dirt and flows of technological fluids when washing the engine compartment, special detergents are used. Depending on their species, the method of application and preparation varies in detail painted in the instructions on the packaging. It is impossible to produce a hot engine car wash, as the remedy on the unit of the unit dries. The procedure itself is performed in the following order:

  1. After preparatory work on the engine, determine the detergent and expect during the time specified in the instruction.
  2. With the help of brushes, the most contaminated, hard to access and problem places Engine.
  3. Washing detergent. The operation is repeated until the foam and dirt from all sites are completely removed.
  4. Removing the previously installed isolation from film and tape.
  5. Dry engine compressed air. Special attention is paying out candle wells, contacts and varnishes where water is going.
  6. Starting the engine and checking its uninterrupted operation.

The engine washing, made with ignoring the above rules is dangerous with its consequences, the most innocuous of which is not a starting engine due to water from entering the electrical wiring connectors. Sometimes car owners do not take into account the significant temperature difference, leading to the deformation of the cylinder head. For this reason, the washing in the winter is better to postpone until the summer.

During the procedure itself, it is impossible to use a strong jet, working with a connected battery and apply detergents for this not intended.

Outcome

When everything is done correctly, and the washing is made with all precautionary measures, the result of the effort will be pure engine compartment, pleases not only external species, but also the absence of certain technical problems. With uncertainty B. own power, it is better to resort to services specialized servicewhich will not only perfect its work perfectly, but also will give a guarantee of eliminating possible problems of the power unit caused by the sink.

procrossover.ru.

How to wash the car engine from oil? - leading auto portal

Maintain a car engine clean - the duty of each owner of the car. And the point here is not only aesthetic form, because dirt is not the best friend of the mechanism. However, most motorists do not pay due attention to the cleanliness of the motor, fearing him to harm.

About how "harmful" is, we will talk in this article, and consider how to wash it right car EngineSo that this procedure brings exclusively.

Why wash still worth

To begin with, we will understand why the engine must be maintained clean. First, the clean motor looks much better. If you are going to undergo a technical inspection, or sell a car with mud under the hood it is better not to do. Secondly, dirt will not allow you to notice and prevent possible leakage of technological fluids (oil, toosol, fuel). Thirdly, dust passable with moisture is a pretty good electricity conductor, which can cause not only the current leakage and the discharge of the battery, but also a short circuit. And if the base of the mud is not moisture, but gasoline, solarium or oil - the fire risks increase.

So the engine is needed, it is only important not to make mistakes.

Motor Motor Methods

If you do not have the ability or desire to wash the motor yourself, you can use the services of special services. There will make everything for you, naturally, not free. The cost of such a procedure begins from 2000 rubles. But here there are nuances. Having stopped at the sink, where such services are provided, ask if its employees will take responsibility in case of anything. If you immediately refuse, motivating the fact that "everything can happen", feel free to leave with such a sink.

The classic sink involves applying a special solution to the surface of a special solution that can dissolve and neutralize the dirt, followed by its washing and drying with a jet of air.

Some "specialists" wash the motors acetone, gasoline, kerosene, a means of cleaning carburetors, etc. We extremely not recommended this, as it carries the fire danger, and in addition, the listed fluids are solvents and, when interacting with rubber or plastic, cause their destruction.

There is another way - washing dry steam. It is considered the most efficient and safe, however, without a steam generator, it is hardly possible to implement it at home.

Means for washing

Now let's talk about detergents. Immediately designate that no powders, liquids and gels for washing dishes or kitchen appliances are not suitable here. To wash the engine at home, you will need to buy a special shampoo for it. Before buying, pay attention to its composition. Shampoo must have a neutral level of acidity, otherwise rubber and plastic parts will be injured again.

Choosing a detergent, preference should be given to liquids, gels in canopy or spray bottle. Of course, they are, of course, somewhat more expensive than conventional bottled liquids, but with them you will be more convenient to apply the tool on the surface of the engine, without using tassels and washcloths.

As for the manufacturer, it is better to choose the means of well-known foreign manufacturers, such as "Liqui Moli", "Engine Degrazer and Cleaner", or domestic, such as "Consol" or "Sintec".

Preparation for washing

Wash engine better on the street in warm sunny weather. Do not do this in frost, snow, rain. In advance, take care of your hand:

  • detergent;
  • clean water, preferably running;
  • merchal;
  • a small brush with a long handle;
  • clean rags;
  • rubber gloves (for hand protection);
  • polyethylene film (packages);
  • aluminium foil;
  • scotch.

Getting to wash the engine

The procedure for performing work is as follows:

  • install the car on the flat site, fixing it parking brake;
  • warm the engine up to 30-400C is the optimal temperature for washing;
  • lift the hood, disconnect both terminals from the battery;
  • remove the battery and remove it from the engine compartment (this is not necessarily, but preferably);
  • remove plastic and rubber lining that can interfere with the washing process
  • with the help of a plastic film or packages, insulating the engine elements to which water should not fall (generator, starter, air intake, distributor and ignition coil, sensors and their connectors, mounting block fuses, etc.);
  • secure the film or packages of scotch;
  • where the film or packages fail to overlap the likely water from entering, isolate such places with foil;
  • when everything is ready, you need to wet the engine surface. To do this, you can use a mini-sink with a weak water pressure (if it is), or by the usual wet washcloth;
  • while the wet engine, put the gloves and apply detergent on its surface, so that they are fully covered with foam;
  • give the center for 15-20 minutes to "work" on your own (the instructions indicated the exact time);
  • waving the specified time, wash and brush remove the dirt from the surfaces of the engine, not forgetting to rinse them in clean water (if there is a mini-washing, a miserable jet of dirt);
  • when the dirt is removed, with the help of a cloth, wipe the engine, removing water from it;
  • moisture residues are removed using a compressor and air jet;
  • if there is no compressor, you can use the usual automotive pump;
  • remove and remove polyethylene packages, foil;
  • leave the car S. open hood Squash for 3-4 hours, preferably under the outdoor sun;
  • after specified time, install and connect the battery;
  • run the engine and allow it to work until it warms up to the operating temperature.

Errors allowed when washing the engine

  • 1. Using strong water pressure. Applying a mini-washing for washing of a motor in no case cannot be directed to it a powerful jet. It can damage not only polyethylene, which is protected by important elements of the engine, but also its communications (hoses, tubes).
  • 2.Moy with household detergents. As a result of such a procedure, you may not achieve the desired result, in addition, it is possible to oxidizing the surfaces of the engine, damage to plastic and rubber products.
  • 3. Another effective or incomplete insulation of electrical appliances.
  • 4. waters using gasoline, kerosene, acetone: high risk of fire, dangerous evaporation, unpleasant smell.
  • 5. The motion of the engine in frosty weather: the efficiency of the detergent is reduced, completely removed moisture is impossible due to low temperatures.
  • 6. Water hot engine: water evaporates instantly, the detergent is folded, not so much to dissolve dirt.
  • 7.Connected battery: Forgetting to turn off the battery, you jeopardize the entire electrical circuit of the machine.
  • 8. The excavation of the engine immediately after washing: moisture remains may still be present on electrical equipment, which can lead to short circuit.

What if after washing there were problems with the engine work

No one is insured against errors, so if you find that when starting the engine, it does not start or "troit", float the speed, the emergency oil pressure lamp or the "check" lights up, in the engine compartment or in the cabin there is a smell of burned plastic, turn off immediately Ignition and disconnect the terminals from the battery. After that, analyze possible reasons Fault.

If the engine started and worked, it means that the starter is most likely everything is in order. First, remove the lid of the traver and remove the residues of moisture from under it with air jet. Check the high voltage and candle wires. Note the oil pressure sensors connectors, mass flow The air, the position of the crankshaft, the temperature of the coolant, etc. Most often the cause of the "check" to illuminate is a violation of contact or entering the water connector. If the engine started and worked normally, but the smell of burned plastic appeared, it is possible to enter the generator winding and their closure. In this case, the further operation of the power unit is undesirable before the diagnosis of the generator.

If the motor refuses to start, checking should be started from the fuse block and the connection of the plus wire of the starter.

In addition to the topic, watch the video:

miravto24.ru.

Self car wash car

During the operation of any car sooner or later, the windscarette will pollute and lose initial View. By a larger account, dirt does not affect the technical characteristics of the engine, and the washing of this node is not mandatory. Also, no automaker regulates the frequency of the engine washing and does not give recommendations regarding the fastement procedure itself.

However, it is worth being aware of the risks that will arise if not to wash for a long time. force aggregate.

What problems can be from a dirty motor

First, it is very difficult to remove oil leakage, coolant, etc., is very difficult on a polluted engine, etc. Subsequently, the auto owner will not notice a small problem that will then become greater.

Secondly, thick layers of mud complicate the normal heat transfer of the motor, and it will overheat. And this situation leads to a reduction in power, increasing the consumption of fuel and accelerated wear DVS.

Thirdly, the possibility of electric current leaks on the dirty wiring is higher, which makes it difficult to start the engine in some cases.

Fourth, oil trails will inevitably evaporate and form easily flammable pairs, which increases the possibility of fires in the engine compartment.

Finally, in a dirty windscarette space, it is not so pleasant and easy to perform repair and preventive work. The owner of the car with strongly blurred internal mechanisms can simply refuse maintenance in the auto repair shop.

How to wash the dirt from the engine

It is logical that the competent car enthusiast will monitor the purity of the engine. How to do it right on your own, without resorting to the help of third-party people?

Any car wash begins with a selection. special tools To purify the engine. The use of household detergents is ineffective, as they will not be able to dissolve the oil-containing dirt.

Also, many believe that household sinks of high pressure will help to quickly clean the engine, but such a procedure is actually dangerous. The water jet is easily damaging various seals, causing corrosion in the generator and other electronics, flushes important stickers from the nodes and can even damage paintwork. As an alternative, compressed air is used, but it is inffective in hard-to-reach places and with severe pollution.

The most effective cleaning method

It is best to adhere to the next engine washing algorithm. Before you start, it is necessary to isolate with polyethylene and scotch all vulnerable to water nodes: electrical displacements, generator, air intake air filter, relay and so on. The battery needs to be removed. For greater efficiency, the engine is to warm up on idlingbut it should not be hot.

The special foam cleaner is best removed. It must be applied on all the surfaces and wait a few minutes to do it. Active stable foam very effectively eliminates the most deprived and burnt stains, without bringing harm to plastic and rubber. For hard-to-reach places and the strongest pollution it is worth using a hard brush. Then weak jet of the water wash off the detergent, wipe the places available to us and remove all the applied isolation.

Cleaning the battery

Mixture in certain proportions of water and food Soda Proceed rechargeable battery. Such a procedure will perfectly protect the terminals from corrosion, improve the engine launch and will slightly increase the battery life.

You need to dry moisture after washing

In the presence of the compressor, the drying engine drying process will be the most simple and rapid, but the household vacuum cleaner or the compressed gas can also significantly speed up the evaporation of water. In extreme cases, you can start the car and give it to work for five minutes. However, drying is an important point When washing, and it is not necessary to skip it, since moisture can cause great damage to the electronics.

The better wash at home

Cleaning the engine and its car wash, not a complex process, quite affordable for each motorist. The main snag is by and large in the choice of detergents and compliance with a certain technology. It is worth noting the fact that it is best to make a motor with your own hands, alkaline detergents or chalp concentrates for car wash are best suited.

With the help of a sprayer, the solution is applied to the subcontrol space and hard-to-reach places. Next, it is necessary to wait 10-15 minutes while the remedy is the dirt, after which it all washed off the water pressure. Use brushes and sponges for rubbing pollution is extremely not desirable, as it is easy to damage the wiring and so on hinged equipment. The sink should be the most contactable.

Adhering to such an algorithm for washing of the boost space, you definitely do not harm nodes and aggregates. It is recommended to carry out a sink as contaminated, which is very dependent on climate and operating conditions. Additionally, it is worth wash the engine before diagnostic and repair work, And when selling this high-explore occupation will improve the perception of the car in the eyes of the buyer.

avtoexepr.ru.

What is better to wash the car engine from oil and dirt?

  • External purity of the engine
  • Cleaning market suggestions
  • Materials and tools for cleaning the power unit
  • Technology cleaning the power unit

Very often, in front of motorists, the question arises than to wash the engine of the car from the oil. The power unit is one of the most important and expensive devices of the car. The life of its operation is directly dependent on its technical condition. It is very important to monitor the purity of the outer surface of the motor.

The engine needs efficient cleaning, as the dirt signals the deterioration of the cooling of the motor.

External purity of the engine

Engine housing while driving, especially on country roads, covered with dust and mud. When oil gets on the walls, the layer of dirt grows. Engine cleanliness is not only aesthetics under the hood. The dirt on the housing indicates the poor attitude of the owner to the car, and also signals the deterioration in the cooling of the motor. The engine needs an effective heat removal, which is formed when combustion of fuel. His overheating entails:

The spraying of the mixture occurs right from the spray, forming a large amount of foam.

Timely cleaning of the outer surface from oil and mud will extend the service life of the power unit. Also, the oil entering adversely affects the state of rubber products and the electrical wiring isolation. It must be remembered: the excessive accumulation of oil on the case can cause a fire! Missing the engine engine from the oil is required at least once a year.

To wash the outer part of the engine, some owners turn to those skilled in the art. The "Moting Motor" service is offered on car sinks. The price of its low and the procedure takes up to half an hour. The engine is washed with a jet of hot water under pressure. At the same time, there is a risk of water to the responsible components of the car electrical equipment (starter, generator, ignition system, etc.).

You can still wash the engine of the car from the oil on its own. There are many detergents of domestic and foreign manufacturers. When selecting the brand and volume of liquids to remove oils, it is necessary to take into account the degree of contamination of the engine housing, its character and area.

In order to wash the oil on the ribs and in other hard-to-reach places of the engine, the spray cans apply. Means do not need to prepare. The mixture is sprayed directly from the spray, forming a large amount of foam. The latter is well corrosive oils and is held on the vertical walls of the engine. All tranquits of reusable, have a small volume, lungs, take up little space, it is convenient to store them on the shelf in the garage.

Let's immediately divide all cars to those operated mainly on the asphalt and those that ride a lot of off-road. Our advice concern the first. For the second tips, they do not need - their owners and everyone knows everything. Obviously, these professionals or too passionate lovers are the category of car owners, which is simply forced to periodically waste details and nodes in the engine compartment.

The washing for them is obligatory that the layers of dirt do not interfere with the movement of the controls, and also did not prevent the engine cooling and gearbox. After all, clay layers thick up to several centimeters can form a kind of ceramic cocoon on the details. Here you can advise only one thing: wash the car, if possible, shortly after contamination, while the dirt did not have time to order.

Where to go?

Now let's talk about another category of cars. Motor compartments of these machines, although polluted, but still not so intense. Car lists living in private houses with household plots most often. Purification of the car Most owners, especially in large cities, are carried out on paid car wash. Wash the body outside, clean the mats, or even the upholstery of the cabin - is great, but to let these MoidOdovs of the XXI century under the hood?

Let's first decide for what purpose the engine and motor compartment are used.

Sink for sale

Trying to wash the engine before selling - the lesson is very dubious. Many buyers are aware that it is often in order to hide traces of recent engine repair after intensive oil leakage. Much more confidence in them causes a blurred dry dust engine, which "did not touch the hand of a person." And I fully agree with this opinion. Summary: Before selling the machine, the engine, if it is really dry, is not to wash.

Sink before ambitious

Wash the power unit before dismantling - the idea is attractive: still do not get out when working. But I would advise if I wash the unit, then after that it is no longer run. And during the repair, any moisture will dry.