Tires VIATTI STRADA 185 65 R15

How to travel for free: For this you will need a pillow - in a dream you can travel around the world for free and even fly to the moon.
For other cases, you will need money on the journey.

I continue the series of articles addressed to the progressive class of independent travelers started in this:

To start a couple of charts that you yourself will be able to come to one of the "Currency Converter" sites
Playing ratios of different national currencies to the ruble, you can notice the binding of a certain region or country to the dollar or euro.

As you see - the dollar has a greater influence in the world. Approximation of the national currency to the euro is noticeable only in Europe. Yes, national currencies remained in Europe: Czech Republic, Poland, Hungary, Lithuania, Bulgaria, Romania, Serbia, Albania ....

What money to take with you on the journey

If you are going abroad - forget about rubles. Well, didn't you come in handy on the RB on the RB.
If you are going to hold a Christmas or New Year In the Czech Republic or Hungary - take euro
And if your path lies in the country different from Europe - there is only a dollar
I do not argue that the ruble is accepted in Thailand exchanges, but if you did not stroll to mathematics at school and know how to solve the fraction, you will see the advantages of the dollar's home billet, followed by Bat's exchange in comparison with the direct exchange of rubles in the country of smiles - there will be no smile

Compact pays and ATMs

Only cash + cards tied to currency accounts (in euro or dollars)!
No ruble cards
First, you cannot assume whether your bank will be able to meet your next birthday, simply speaking - no one will tell you anything about his health
Secondly, having rubles on the card, you lose every day of falling the national currency of their dollar equivalent. In addition, you will lose abroad on the conversion rate of the bank - in our time, the banks lay in their exchange rate differences between the sale / purchase of the dollar (euro) / ruble more points with a margin - all this if you have a ruble card account
Thirdly, you lose on removing money through an ATM. In the case of Thailand, they will lean both Thais - ATM owners and the Russian bank - where you have money

Important addition and correction of this item:

Cards tied to a bill in dollars or euro allow you to save on the exchange rate of the dollar (euro) / national currency

Fresh example from today's alpha bank statement, an account in euros:
Payment of expenses at the Madinat Jumeirah Dubai: 1040 Dirham \u003d\u003e written off from account 226.81 € \u003d\u003e Course 4,5853
We look at the currency converter: http://www.oanda.com/lang/ru/currency/converter/

Cash exchange rate in Dubai 4,46264 (in the parameters I ask the interbank course 5%)
Setting a typical interbank + 3% on the converter I get the course 4,55659 and for an ATM (+ 2%) 4,60356

Currency exchange - only no airport and not a hotel

The worst exchange rate of your dollars or the euro will be offered at the airport or at the hotel.
It is also necessary - the best exchange rate in Sri Lanka will be in jewelry shops, and in the capital of Burundi - Bujumbura in the construction market.
Based on this, before the expected trip, find out the best exchange of your money.
We also specify in exchange offices - whether the Commission for the exchange is taken

Overhead, minimization

It's time to count money. If you could have been wrong before, now these errors are expensive.
When preparing for travel, carefully learn the booking conditions. Refusing additional charges - all sorts of insurance, charges for paying tickets by credit card, additional spending for breakfast in hotels (there are free breakfasts, as well as a free airport shuttle service), additional reasons in the form of an additional driver or GPS

Travel always and everywhere

Travel starting from the aircraft exit. Trade even if the price tag is screwed to the subject of bargaining. Use the acting deposit that there is any enlightened person: gesticulating, go back, appeal to the public ... But do not replay, otherwise you can shock. That is, feel the enemy, and the seller - he is your opponent enemy, with whom it is necessary to see a draw - neither to me. Otherwise, again, it can be shilled. If the enemy won you, then you are a sucker in his eyes and forever all them

Are there cheap countries in the world?

Of course there is. Going to Thailand - look aside. Gathering in brazil know - in

• Manufacturer VIATTI
• Seasonality Summer
• 185
• 65
• 15
• Speed \u200b\u200bindex
• Load index
• Extended warranty VIATTI
• Spikes Without spikes

The Russian company VIATTI confidently takes a strong position in the auto business world. It offers inexpensive tires, while maintaining competitive quality. Model VIATTI STRADA (V-130) 185/65 R15 H 88 has not exceeded. These tires are invariably popular. They are often chosen and 'in' Ufa '', which prove reviews.

Why experienced drivers advise to buy Viatti Strada (V-130) 185/65 R15 H 88

• Low noise level, high acoustic comfort;
• Durable sidewalls are not terrible damage;
• Easy handling in direct and when turning;
• Absence effect of aquaplaning when increased speeds;
• Reliability in conditions of sudden weather;
• Wear resistance. You can ride on such rubber, not one season;
• Perfect ratio Prices / quality. Similar value are offered a few brands.

Important characteristics

Tire Viatti Strada (V-130) 185/65 R15 H 88 was created for all types of passenger cars in a large number of sizes. Manufacturers have chosen an asymmetrical non-directional pattern of a tread that allows you to drive along asphalt and dirt roads.

Smooth rigs ribs helps quickly. With their help, the car confidently holds the course. They are complemented by transverse grooves. They act as primer, provide sufficient adhesion on the wet track, reduce the braking path.

The protector is complemented by wide annular channels. With their help, the contact stain remains dry, transport does not record during maneuvers. Control the situation is becoming easier, because the tires quickly respond to driving movements.

Prices for automotive products have purchases. Learn how much this product is on the Wheel Dar website.

Online payment by bank card

Only the owner of the card can be paid by the bank card. Upon receipt of the goods, the owner of the card must be present personally, to present a card and a document certifying the person (passport, or a driver's license).

Cash settlement (for individuals)

• Payment of goods is made only in rubles.
• The calculation is made directly in place.

Payment of bank card

You can pay the order by the bank card upon receipt.

Cashless payment (for legal entities)

• When ordering goods or services for non-cash payments, it is necessary to provide a company manager by fax or e-mail: INN, CAT, full name, legal address, actual address, surname, name and patronymic of the head, last name, first name and patronymic of the contact person.
• The invoice is valid for 5 banking days.
• The goods are released from the warehouse or delivered to the specified location only after the actual receipt of money for the current account in the presence of a power of attorney from the organization and passport of the trustee.

Self-help

When placing an order, select a convenient time and take your purchase yourself.

• You come for a commodity to that shop where they ordered.
• Save money at the cost of courier delivery.
• Do not lose time on the expectation of the order, and take it at any suitable time.

Standard warranty

The warranty period is the term during which the buyer, discovering the lack of goods, has the right to demand from the seller or manufacturer to take measures to eliminate the defect. The seller must eliminate the shortcomings, if it is not proved that they arose due to violations by the buyer of the rules of operation.

Who establishes a warranty period

The warranty period is set for each product by the manufacturer and is indicated in documents or warranty documents issued by the Seller.

Warranty service includes

Elimination of the shortcomings of goods in certified service centers

Exchange for similar goods without surcharge

Exchange on a similar product with surcharge

Return of goods and enumeration money At the expense of the buyer

Exchange and Return Rules

Return of goods of proper quality

The buyer has the right to refuse the goods of proper quality before it is received or within seven days after.
The buyer has the right to exchange goods of proper quality within 14 days from the date of its receipt.

Exchange and return of goods inappropriate quality

In accordance with Art. 26.1. Law of the Russian Federation No. 2300-I "On Protection of Consumer Rights", the buyer has the right to refuse the goods at any time before its transfer, and after the transfer of goods - within seven days.

In accordance with Art. 25 of the Law of the Russian Federation No. 2300-I "On Protection of Consumer Rights" Buyer has the right to exchange goods of proper quality to a similar product from the seller, if the specified goods did not fit in shape, dimensions, styasus, color, size or configuration. The buyer has the right to exchange of goods of proper quality for fourteen days, not counting the day of its purchase.

In the event that the similar product is not available on sale on the day of the buyer's appeal to the seller, the buyer has the right to demand the return paid for the specified goods of the sum of money.

The requirement of the consumer about the return of the amount paid for the specified goods is subject to satisfaction within three days from the date of return of the specified product.

The return of goods of good quality is possible if its transportation is preserved, consumer properties, as well as a document confirming the fact and conditions for the purchase of the specified goods. The lack of a document from the buyer confirming the fact and conditions for the purchase of goods does not deprive him of the opportunity to refer to other evidence of the purchase of goods from this seller.

The buyer is not entitled to refuse the product of proper quality having individually-specific properties, if the specified product can be used exclusively by the buyer.

If the buyer's refusal from the goods, the seller must return the amount of money paid by the Buyer under the contract, with the exception of the Seller's expenses for delivery from the buyer of the returned goods, no later than ten days from the date the buyer has relevant requirements. By the time of the reset, the goods must be transferred to the buyer to the seller.

In the event that the goods acquired by the buyer in the online store refers to the "List non-food products Good quality, not refundable or exchange for similar goods of other size, forms, dimensions, shapes, coloring or configuration, approved by the Decree of the Government of the Russian Federation dated January 19, 1998 No. 55, the refund or exchange of such goods is not possible.

About the intention Return the seller Goods Buyer reports that the seller by mandrel to its email address of the letter (messages) with details to transfer funds.

A refund

The return period is determined in the law on the protection of consumer rights (Article 25, 31), the rules for sale of goods by remote method (approved. Decree of the Government of the Russian Federation of September 27, 2007 No. 612 (Ed. From 10/04/2012) and also depends on The type of payment originally chose the buyer.

To list the return amount to the buyer's account in non-cash, the buyer is obliged to inform the seller full details for listing.

Decoding Tire Model ✕

1. Tire pressure
2. Vertical load

3. XL (Extra Load)

8. Ortheological tires

">3 040

Decoding Tire Model ✕

This model The following characteristics of the tire model are: Load index - 88 (560 kg), speed index - H (210 km / h).

What other tire characteristics are?

The load index is the maximum allowable (limit) load on the tire (measured in kilograms) when the vehicle moves with the maximum allowable (limit) speed at a given pressure in the tire. In other words, it shows what load, it withstands each tire at the maximum speed. It should not be forgotten that the load on the wheel is determined not only by passengers and cargo cargo, but also the weight of the car itself.

The detection of the tire speed index can be given simple - this is the maximum speed that the tire is withstanding. Another thing is that it is understood by the term "withstands". Of course, first of all, these are understandable conditions for use:
1. Tire pressure
2. Vertical load
3. External environmental parameters (coating quality, weather conditions)
With comparable use conditions, the speed index is a certain manufacturer's warranty that, with the claimed maximum tire speed, its physicomechanical properties will save and will not collapse.
The tire speed index during marking is indicated by one of the letters of the Latin alphabet, which should be immediately behind the load index. It is usually used to decrypt it.

3. XL (Extra Load)

Stressed tire, the load index of which is 3 units higher than that of the usual tires of the same size.

Runflat technology is based on the concept of reinforced bus sidewalls. When the usual tire is blown away, it simply settles under the weight of the car, the side departs from the disk and the sidewalls flatten the weight on the road completely destroys the tire over a few kilometers. Runflat tire's reinforced sidewalls hold the bus on the disk and successfully keep the weight of the car after the puncture and full pressure loss. At the same time, all the dynamic security systems of the car, such as ABS, ESP, DSC, CBC, etc. remain active.

5. Presence of a bump (bus with a side, protecting the disk from damage)

Tire has a fibers that protects the disk from damage

6. ContiSeal - Technology designed to seal the buses

Tightens the punctures with a diameter of up to 5 mm.
- Plugs are delayed, even if the subject that caused the puncture, departs from the tire.
- ContiSeal ™ tires have the same magnificent characteristics as the other Continental tires.
- When proof, there is no need to immediately stop and change the wheel.

7. Contisilent - technology developed by the Continental Concern specialists to reduce noise in the car

Reducing internal noise on all road surfaces
- ContiSirent ™ works in any weather
- no changes in technological characteristics
- No negative impact on speed tire characteristics
- Easy installation and storage of tires

8. Ortheological tires

In addition to the standard set of labels, some tires can detect special designations that relate to automotive oligations. Oligation is the result of the selection and recommendation of the tire automaker for a particular car, which laid a certain potential. This means that the tire is adapted to technical features The car and ensures the highest possible characteristics when driving on it. Currently, there are a number of manufacturers who apply their own signs to tires, indicating that these specific tires are specially designed for certain car models. As a rule, it is these tires that are installed on new cars on the conveyor.
- * (asterisk) - tire is optimized for bMW cars
- A - optimized for audi cars
- F - Optimized for Ford cars
- G - optimized for cars Opel
- J - Optimized for Jaguar cars
- lro - optimized for land cars Rover
- M3 - Optimized for BMW M3 cars
- Mo - Optimized for Mercedes cars
- N0, N1, N2, N3, N4, N5, N6 - Optimized for Porsche cars
- RO1 - Optimized for cars Audi Quattro.

">2 730

Decoding Tire Model ✕

This model has the following tire model characteristics: Load index - 88 (560 kg), speed index - H (210 km / h).

What other tire characteristics are?

The load index is the maximum allowable (limit) load on the tire (measured in kilograms) when the vehicle moves with the maximum allowable (limit) speed at a given pressure in the tire. In other words, it shows what load, it withstands each tire at the maximum speed. It should not be forgotten that the load on the wheel is determined not only by passengers and cargo cargo, but also the weight of the car itself.

The detection of the tire speed index can be given simple - this is the maximum speed that the tire is withstanding. Another thing is that it is understood by the term "withstands". Of course, first of all, these are understandable conditions for use:
1. Tire pressure
2. Vertical load
3. External environmental parameters (coating quality, weather conditions)
With comparable use conditions, the speed index is a certain manufacturer's warranty that, with the claimed maximum tire speed, its physicomechanical properties will save and will not collapse.
The tire speed index during marking is indicated by one of the letters of the Latin alphabet, which should be immediately behind the load index. It is usually used to decrypt it.

3. XL (Extra Load)

The reinforced bus, the load index of which is higher than 3 units than the usual tires of the same size.

Runflat technology is based on the concept of reinforced bus sidewalls. When the usual tire is blown away, it simply settles under the weight of the car, the side departs from the disk and the sidewalls flatten the weight on the road completely destroys the tire over a few kilometers. Runflat tire's reinforced sidewalls hold the bus on the disk and successfully keep the weight of the car after the puncture and full pressure loss. At the same time, all the dynamic security systems of the car, such as ABS, ESP, DSC, CBC, etc. remain active.

5. Presence of a bump (bus with a side, protecting the disk from damage)

Tire has a fibers that protects the disk from damage

6. ContiSeal - Technology designed to seal the buses

Tightens the punctures with a diameter of up to 5 mm.
- Plugs are delayed, even if the subject that caused the puncture, departs from the tire.
- ContiSeal ™ tires have the same magnificent characteristics as the other Continental tires.
- When proof, there is no need to immediately stop and change the wheel.

7. Contisilent - technology developed by the Continental Concern specialists to reduce noise in the car

Reducing internal noise on all road surfaces
- ContiSirent ™ works in any weather
- no changes in technological characteristics
- No negative impact on speed tire characteristics
- Easy installation and storage of tires

8. Ortheological tires

In addition to the standard set of labels, some tires can detect special designations that relate to automotive oligations. Oligation is the result of the selection and recommendation of the tire automaker for a particular car, which laid a certain potential. This means that the tire adapts to the technical features of the car and ensures the highest possible characteristics when driving on it. Currently, there are a number of manufacturers who apply their own signs to tires, indicating that these specific tires are specially designed for certain car models. As a rule, it is these tires that are installed on new cars on the conveyor.
- * (asterisk) - tire optimized for BMW cars
- A - Optimized for Audi cars
- F - Optimized for Ford cars
- G - optimized for cars Opel
- J - Optimized for Jaguar cars
- Lro - Optimized for Land Rover cars
- M3 - Optimized for BMW M3 cars
- Mo - Optimized for Mercedes cars
- N0, N1, N2, N3, N4, N5, N6 - Optimized for Porsche cars
- RO1 - Optimized for cars Audi Quattro

">2 810

Decoding Tire Model ✕

This model has the following tire model characteristics: Load index - 92 (630 kg), speed index - T (190 km / h).

What other tire characteristics are?

The load index is the maximum allowable (limit) load on the tire (measured in kilograms) when the vehicle moves with the maximum allowable (limit) speed at a given pressure in the tire. In other words, it shows what load, it withstands each tire at the maximum speed. It should not be forgotten that the load on the wheel is determined not only by passengers and cargo cargo, but also the weight of the car itself.

The detection of the tire speed index can be given simple - this is the maximum speed that the tire is withstanding. Another thing is that it is understood by the term "withstands". Of course, first of all, these are understandable conditions for use:
1. Tire pressure
2. Vertical load
3. External environmental parameters (coating quality, weather conditions)
With comparable use conditions, the speed index is a certain manufacturer's warranty that, with the claimed maximum tire speed, its physicomechanical properties will save and will not collapse.
The tire speed index during marking is indicated by one of the letters of the Latin alphabet, which should be immediately behind the load index. It is usually used to decrypt it.

3. XL (Extra Load)

The reinforced bus, the load index of which is higher than 3 units than the usual tires of the same size.

Runflat technology is based on the concept of reinforced bus sidewalls. When the usual tire is blown away, it simply settles under the weight of the car, the side departs from the disk and the sidewalls flatten the weight on the road completely destroys the tire over a few kilometers. Runflat tire's reinforced sidewalls hold the bus on the disk and successfully keep the weight of the car after the puncture and full pressure loss. At the same time, all the dynamic security systems of the car, such as ABS, ESP, DSC, CBC, etc. remain active.

5. Presence of a bump (bus with a side, protecting the disk from damage)

Tire has a fibers that protects the disk from damage

6. ContiSeal - Technology designed to seal the buses

Tightens the punctures with a diameter of up to 5 mm.
- Plugs are delayed, even if the subject that caused the puncture, departs from the tire.
- ContiSeal ™ tires have the same magnificent characteristics as the other Continental tires.
- When proof, there is no need to immediately stop and change the wheel.

7. Contisilent - technology developed by the Continental Concern specialists to reduce noise in the car

Reducing internal noise on all road surfaces
- ContiSirent ™ works in any weather
- no changes in technological characteristics
- No negative impact on speed tire characteristics
- Easy installation and storage of tires

8. Ortheological tires

In addition to the standard set of labels, some tires can detect special designations that relate to automotive oligations. Oligation is the result of the selection and recommendation of the tire automaker for a particular car, which laid a certain potential. This means that the tire adapts to the technical features of the car and ensures the highest possible characteristics when driving on it. Currently, there are a number of manufacturers who apply their own signs to tires, indicating that these specific tires are specially designed for certain car models. As a rule, it is these tires that are installed on new cars on the conveyor.
- * (asterisk) - tire optimized for BMW cars
- A - Optimized for Audi cars
- F - Optimized for Ford cars
- G - optimized for cars Opel
- J - Optimized for Jaguar cars
- Lro - Optimized for Land Rover cars
- M3 - Optimized for BMW M3 cars
- Mo - Optimized for Mercedes cars
- N0, N1, N2, N3, N4, N5, N6 - Optimized for Porsche cars
- RO1 - Optimized for cars Audi Quattro

">2 110

Decoding Tire Model ✕

This model has the following tire model characteristics: Load index - 88 (560 kg), speed index - H (210 km / h).

What other tire characteristics are?

The load index is the maximum allowable (limit) load on the tire (measured in kilograms) when the vehicle moves with the maximum allowable (limit) speed at a given pressure in the tire. In other words, it shows what load, it withstands each tire at the maximum speed. It should not be forgotten that the load on the wheel is determined not only by passengers and cargo cargo, but also the weight of the car itself.

The detection of the tire speed index can be given simple - this is the maximum speed that the tire is withstanding. Another thing is that it is understood by the term "withstands". Of course, first of all, these are understandable conditions for use:
1. Tire pressure
2. Vertical load
3. External environmental parameters (coating quality, weather conditions)
With comparable use conditions, the speed index is a certain manufacturer's warranty that, with the claimed maximum tire speed, its physicomechanical properties will save and will not collapse.
The tire speed index during marking is indicated by one of the letters of the Latin alphabet, which should be immediately behind the load index. It is usually used to decrypt it.

3. XL (Extra Load)

The reinforced bus, the load index of which is higher than 3 units than the usual tires of the same size.

Runflat technology is based on the concept of reinforced bus sidewalls. When the usual tire is blown away, it simply settles under the weight of the car, the side departs from the disk and the sidewalls flatten the weight on the road completely destroys the tire over a few kilometers. Runflat tire's reinforced sidewalls hold the bus on the disk and successfully keep the weight of the car after the puncture and full pressure loss. At the same time, all the dynamic security systems of the car, such as ABS, ESP, DSC, CBC, etc. remain active.

5. Presence of a bump (bus with a side, protecting the disk from damage)

Tire has a fibers that protects the disk from damage

6. ContiSeal - Technology designed to seal the buses

Tightens the punctures with a diameter of up to 5 mm.
- Plugs are delayed, even if the subject that caused the puncture, departs from the tire.
- ContiSeal ™ tires have the same magnificent characteristics as the other Continental tires.
- When proof, there is no need to immediately stop and change the wheel.

7. Contisilent - technology developed by the Continental Concern specialists to reduce noise in the car

Reducing internal noise on all road surfaces
- ContiSirent ™ works in any weather
- no changes in technological characteristics
- No negative impact on speed tire characteristics
- Easy installation and storage of tires

8. Ortheological tires

In addition to the standard set of labels, some tires can detect special designations that relate to automotive oligations. Oligation is the result of the selection and recommendation of the tire automaker for a particular car, which laid a certain potential. This means that the tire adapts to the technical features of the car and ensures the highest possible characteristics when driving on it. Currently, there are a number of manufacturers who apply their own signs to tires, indicating that these specific tires are specially designed for certain car models. As a rule, it is these tires that are installed on new cars on the conveyor.
- * (asterisk) - tire optimized for BMW cars
- A - Optimized for Audi cars
- F - Optimized for Ford cars
- G - optimized for cars Opel
- J - Optimized for Jaguar cars
- Lro - Optimized for Land Rover cars
- M3 - Optimized for BMW M3 cars
- Mo - Optimized for Mercedes cars
- N0, N1, N2, N3, N4, N5, N6 - Optimized for Porsche cars
- RO1 - Optimized for cars Audi Quattro

">2 368

Decoding Tire Model ✕

This model has the following tire model characteristics: Load index - 88 (560 kg), speed index - H (210 km / h).

What other tire characteristics are?

The load index is the maximum allowable (limit) load on the tire (measured in kilograms) when the vehicle moves with the maximum allowable (limit) speed at a given pressure in the tire. In other words, it shows what load, it withstands each tire at the maximum speed. It should not be forgotten that the load on the wheel is determined not only by passengers and cargo cargo, but also the weight of the car itself.

The detection of the tire speed index can be given simple - this is the maximum speed that the tire is withstanding. Another thing is that it is understood by the term "withstands". Of course, first of all, these are understandable conditions for use:
1. Tire pressure
2. Vertical load
3. External environmental parameters (coating quality, weather conditions)
With comparable use conditions, the speed index is a certain manufacturer's warranty that, with the claimed maximum tire speed, its physicomechanical properties will save and will not collapse.
The tire speed index during marking is indicated by one of the letters of the Latin alphabet, which should be immediately behind the load index. It is usually used to decrypt it.

3. XL (Extra Load)

The reinforced bus, the load index of which is higher than 3 units than the usual tires of the same size.

Runflat technology is based on the concept of reinforced bus sidewalls. When the usual tire is blown away, it simply settles under the weight of the car, the side departs from the disk and the sidewalls flatten the weight on the road completely destroys the tire over a few kilometers. Runflat tire's reinforced sidewalls hold the bus on the disk and successfully keep the weight of the car after the puncture and full pressure loss. At the same time, all the dynamic security systems of the car, such as ABS, ESP, DSC, CBC, etc. remain active.

5. Presence of a bump (bus with a side, protecting the disk from damage)

Tire has a fibers that protects the disk from damage

6. ContiSeal - Technology designed to seal the buses

Tightens the punctures with a diameter of up to 5 mm.
- Plugs are delayed, even if the subject that caused the puncture, departs from the tire.
- ContiSeal ™ tires have the same magnificent characteristics as the other Continental tires.
- When proof, there is no need to immediately stop and change the wheel.

7. Contisilent - technology developed by the Continental Concern specialists to reduce noise in the car

Reducing internal noise on all road surfaces
- ContiSirent ™ works in any weather
- no changes in technological characteristics
- No negative impact on speed tire characteristics
- Easy installation and storage of tires

8. Ortheological tires

In addition to the standard set of labels, some tires can detect special designations that relate to automotive oligations. Oligation is the result of the selection and recommendation of the tire automaker for a particular car, which laid a certain potential. This means that the tire adapts to the technical features of the car and ensures the highest possible characteristics when driving on it. Currently, there are a number of manufacturers who apply their own signs to tires, indicating that these specific tires are specially designed for certain car models. As a rule, it is these tires that are installed on new cars on the conveyor.
- * (asterisk) - tire optimized for BMW cars
- A - Optimized for Audi cars
- F - Optimized for Ford cars
- G - optimized for cars Opel
- J - Optimized for Jaguar cars
- Lro - Optimized for Land Rover cars
- M3 - Optimized for BMW M3 cars
- Mo - Optimized for Mercedes cars
- N0, N1, N2, N3, N4, N5, N6 - Optimized for Porsche cars
- RO1 - Optimized for cars Audi Quattro

">2 510

Decoding Tire Model ✕

This model has the following tire model characteristics: Load index - 88 (560 kg), speed index - H (210 km / h).

What other tire characteristics are?

The load index is the maximum allowable (limit) load on the tire (measured in kilograms) when the vehicle moves with the maximum allowable (limit) speed at a given pressure in the tire. In other words, it shows what load, it withstands each tire at the maximum speed. It should not be forgotten that the load on the wheel is determined not only by passengers and cargo cargo, but also the weight of the car itself.

The detection of the tire speed index can be given simple - this is the maximum speed that the tire is withstanding. Another thing is that it is understood by the term "withstands". Of course, first of all, these are understandable conditions for use:
1. Tire pressure
2. Vertical load
3. External environmental parameters (coating quality, weather conditions)
With comparable use conditions, the speed index is a certain manufacturer's warranty that, with the claimed maximum tire speed, its physicomechanical properties will save and will not collapse.
The tire speed index during marking is indicated by one of the letters of the Latin alphabet, which should be immediately behind the load index. It is usually used to decrypt it.

3. XL (Extra Load)

The reinforced bus, the load index of which is higher than 3 units than the usual tires of the same size.

Runflat technology is based on the concept of reinforced bus sidewalls. When the usual tire is blown away, it simply settles under the weight of the car, the side departs from the disk and the sidewalls flatten the weight on the road completely destroys the tire over a few kilometers. Runflat tire's reinforced sidewalls hold the bus on the disk and successfully keep the weight of the car after the puncture and full pressure loss. At the same time, all the dynamic security systems of the car, such as ABS, ESP, DSC, CBC, etc. remain active.

5. Presence of a bump (bus with a side, protecting the disk from damage)

Tire has a fibers that protects the disk from damage

6. ContiSeal - Technology designed to seal the buses

Tightens the punctures with a diameter of up to 5 mm.
- Plugs are delayed, even if the subject that caused the puncture, departs from the tire.
- ContiSeal ™ tires have the same magnificent characteristics as the other Continental tires.
- When proof, there is no need to immediately stop and change the wheel.

7. Contisilent - technology developed by the Continental Concern specialists to reduce noise in the car

Reducing internal noise on all road surfaces
- ContiSirent ™ works in any weather
- no changes in technological characteristics
- No negative impact on speed tire characteristics
- Easy installation and storage of tires

8. Ortheological tires

In addition to the standard set of labels, some tires can detect special designations that relate to automotive oligations. Oligation is the result of the selection and recommendation of the tire automaker for a particular car, which laid a certain potential. This means that the tire adapts to the technical features of the car and ensures the highest possible characteristics when driving on it. Currently, there are a number of manufacturers who apply their own signs to tires, indicating that these specific tires are specially designed for certain car models. As a rule, it is these tires that are installed on new cars on the conveyor.
- * (asterisk) - tire optimized for BMW cars
- A - Optimized for Audi cars
- F - Optimized for Ford cars
- G - optimized for cars Opel
- J - Optimized for Jaguar cars
- Lro - Optimized for Land Rover cars
- M3 - Optimized for BMW M3 cars
- Mo - Optimized for Mercedes cars
- N0, N1, N2, N3, N4, N5, N6 - Optimized for Porsche cars
- RO1 - Optimized for cars Audi Quattro

The load index is the maximum allowable (limit) load on the tire (measured in kilograms) when the vehicle moves with the maximum allowable (limit) speed at a given pressure in the tire. In other words, it shows what load, it withstands each tire at the maximum speed. It should not be forgotten that the load on the wheel is determined not only by passengers and cargo cargo, but also the weight of the car itself.

The detection of the tire speed index can be given simple - this is the maximum speed that the tire is withstanding. Another thing is that it is understood by the term "withstands". Of course, first of all, these are understandable conditions for use:
1. Tire pressure
2. Vertical load
3. External environmental parameters (coating quality, weather conditions)
With comparable use conditions, the speed index is a certain manufacturer's warranty that, with the claimed maximum tire speed, its physicomechanical properties will save and will not collapse.
The tire speed index during marking is indicated by one of the letters of the Latin alphabet, which should be immediately behind the load index. It is usually used to decrypt it.

In addition to the standard set of labels, some tires can detect special designations that relate to automotive oligations. Oligation is the result of the selection and recommendation of the tire automaker for a particular car, which laid a certain potential. This means that the tire adapts to the technical features of the car and ensures the highest possible characteristics when driving on it. Currently, there are a number of manufacturers who apply their own signs to tires, indicating that these specific tires are specially designed for certain car models. As a rule, it is these tires that are installed on new cars on the conveyor.
- * (asterisk) - tire optimized for BMW cars
- A - Optimized for Audi cars
- F - Optimized for Ford cars
- G - optimized for cars Opel
- J - Optimized for Jaguar cars

Viatti Strada Asimmetrico.

Pneumatic radial, with a road asymmetric pattern of a tread, a tubeless tire is designed for operation on passenger cars. Tires Viatti Strada Asimmetrico - summer tires for passenger carsDifferent with a combination of affordable price and high performance, ensure safe and comfortable movement in any weather. Rubber informs the car with confident handling, as well as stability when passing complex turns and maneuverability in urban streets. Tire VIATTI Strada asymmetric demonstrates the ability to effectively resist the deformation influences arising during active maneuvering. Due to the rigidity of the frame, the shape of the contact spot remains stable even with an emergency shift of the trajectory, which determines the high transverse stability car. Protectory rubber is characterized by resistance to abrasive wear and is not afraid of temperature increase when driving on the summer heat. This determines the long-lasting mileage of the series of this series, one set of tires is enough for several seasons, while the coupling indicators do not deteriorate. Viatti Strada Asimmetrico: Comfortable and fast summer tires Tire Viatti Strada asymmetric are greatly suitable for economical motorists who do not want to overpay for the brand, but the comfort and reliability of the tires appreciate. Performance features provide all the needs of the driver who uses vehicle in standard mode. In addition to excellent clutch and informative manageability of the Viatti Strada Asimmetrico V-130 tire provide the driver and passengers. high degree Comfort - Elastic rubber compensates for all road surface irregularities, vibration that occurs at high speed is practically not transmitted to the body. Low noise level determines high acoustic comfort, and also reduces driver fatigue. In the manufacture of parts of VITITI tires, the asymmetric (central part of the tread, shoulder zones, sidewalls) were used a different composition of the rubber mixture. Variable sidewall rigidity allows the bus to compensate for the irregularities of the road, providing comfort of travel. Tight tread tires guarantees protection against mechanical damage, and the rigid corners of the shoulder part determine the stability of the shape of the contact spot; Deep longitudinal channels and grooves that share the shoulder zone blocks make up the Viatti Strada Asimmetrico drainage system, which provides a quick removal of water from the contact stain. This makes it possible to exclude the effect of aquaplaning - one of the most common causes of emergency situations.

Yuri., 11.09.2017 10:09:40

Rubber and disks arrange) price and quality

Aleks., 20.04.2017 11:25:33

I liked the wheels!

Write your review