Interesting homemade for the car. The most unusual homemade cars (20 photos). Construction of a vehicle with firing materials

If you think that homemade is the lot of kids and bored housewives, we will quickly dispel your errors. This section is completely all devoted to the manufacture of homemade from automotive spare parts and rubber tires. You can make almost everything from the auto stroke. From garde shoes to a full-fledged playground with swings, fabulous characters and elements for recreation. Finally, and eternally busy dads will appear the opportunity to show their creative talents and create something useful and beautiful on its own landed area or a rival yard.

The automotive tires are intended to come into disrepair, especially considering domestic quality Roads and sharp temperature differences. Instead of sending the old auto stroke into a landfill, it can be slightly transformed and give a new life on the playground, in the garden or garden.

Nowadays it is hard to surprise some kind new model car, but here vehicleMade with your own hands, always attracted attention and excitement. A person making a car with their own hands, expects two options for developing events. The first is admirable for creation, and the second is a smile of surrounding in the form of the invention. If you figure it out, there is nothing complicated in the car's own assembly. From self-taught engineer, it is only required to know the design of the car and the basic properties of its details.

Historical facts

The start of the construction of cars was preceded by some historical conditions. During the existence of the Union, the mass production of cars was carried out. They could not satisfy certain consumer needs. That is why self-taught inventors began to look for ways out of the current situation and made it by designing self-made cars.

In order to make one car with their own hands, three non-working, from which everyone was shot required spare parts. If you take into account people living in deaf villages, then they most often have improved the various bodies, thereby increasing their capacity. Began to appear cars that had high passability And even water could overcome. In short, all the forces were thrown on simplification of life.

A separate category of people attached great importance to the appearance of the car, and not only its technical properties. In addition to beautiful passenger cars, sports cars were made, which were small in the factory instances. All of these inventions not only surprised others, but also became full parties to the road.

In times Soviet Union There were no specific restrictions on homemade vehicles. Bans appeared in the 80s. They concerned only certain parameters and technical characteristics of the car. But most people could bypass them by registering in the relevant bodies of one vehicle under the guise of a completely different.

What is needed to build a car

To proceed directly to the process itself, it is necessary to think everything in detail. It is necessary to clearly understand how to make future carAnd what technical characteristics it should have. First, it is necessary to determine for what purposes the car will be used, and then embody the idea. If a frank workhorse is required, in order to make it with their own hands, they will need special materials and details. It is also important to make the most resistant to the loads of the body and the car frame. When the car is done only for the ride, the question is only in its appearance.

How to make a car with your own hands for a child, you can learn from the following video:

How to make drawings

Do not trust your head and imagination, it will be better and more correct to think about what kind of car should be. Then all available considerations are transferred to paper. Then it is possible to correct something and as a result, it will appear while the hand drawn copy will appear. future car. Sometimes for full confidence Two drawings are done. The first is depicted appearance Car, and on the second more detailed image of the main details in detail. Before performing the drawing, you need to prepare everything required tools, that is, pencil, eraser, watman and ruler.

Nowadays, there is no need to draw a picture for a long time using an ordinary pencil. To facilitate this task, there are special programs with wide opportunities and with their help can be made any drawing.

Tip! If there are no engineering programs, the usual Word test editor will help in this situation.

With a big desire, you can make any car with your own hands. If there are no own considerations, then ready-made ideas and drawings can be borrowed. This is possible because most people engaged in the creation of homemade cars do not hide their ideas, but, on the contrary, represent the public.

Kit-kara

On the expanses of Europe and America wide distribution reached the so-called "Kit-Kara". So what is it? This is a certain number of different parts with which you can make a car with your own hands. Kit-karas have become so popular that many of their options appeared, which allow you to fold any desired car model. The main difficulty is not assembly, but in the registration of the car obtained as a result of the assembly.

For full-fledged work with Kit-Kara, you must have a spacious garage. In addition, you need tools and knowledge sets. If you do not have defined skills, then the work will not give the desired result. In the case of work with assistants, the assembly process will be faster and fruitful.

This kit includes everything starting from small screws and instructions to large details. For full-fledged work should not have serious difficulties. It should be noted that the instruction has no printed look, but is represented by a video master class, where everything is considered to the smallest details.

It is very important to collect the car correctly. This is necessary in order for creation to comply with all standards and standards prescribed in the regulatory acts of the traffic police. Since non-fulfillment of items leads to the problems of installing a vehicle in accordance with the relevant authorities.

Tip! If there is such an opportunity, you can consult specialists in this field.

In more detail about what kind of whale kira and how to do them, you can learn from the following video:

Construction of a vehicle with firing materials

In order to make the task as much as possible in the assembly of a self-made car, you can take the base of any other car that fully functions. Best to take a budget optionbecause it is never known which way to lead the experiments. If there are old worn items, they need to be replaced with serviceable. If possible, you can make parts with your own hands on lathes, but this is if there is professional skills.

First of all, the assembly of the car must be started from the body, devices and the necessary parts of the cabin. Modern inventors for body use fiberglass, and before such a material was not, and plywood and tin material was used.

Attention! Fiberglass is quite elastic material, which allows you to carry out any idea, even the most extraordinary and original.

The availability of materials, spare parts and other components makes it possible to construct a car that in external parameters and the form will not give up the models of the cars of the world's most leading autoconcens. This requires ingenuity, good fantasy and certain knowledge.

Summarity, made by hand:

Construction of a car from fiberglass

Start assembling a car from fiberglass follows from the moment of selecting a suitable chassis. After that, the selection of the necessary aggregates is carried out. Then it is necessary to move to the marking of the cabin and the attachment of the seats. Upon completion of this, the chassis is strengthened. The frame should be very reliable and strong, because all the main parts of the car will be mounted on it. More precisely, the size of the spatial frame, the better the parts are docked.

For the manufacture of the body it is best to apply fiberglass. But it will pre-make the basis, that is, the framework. To the surface of the frame, you can attach foam sheets that are maximally appropriate to available drawings. Then the holes are cut into need, and if there is a need, the parameters are fitted. After that, fiberglass is fastened to the surface of the foam, which covers it from above and is cleaned. It is not necessary to use precisely foam, any other material possessing high levels Plasticity. Such material can be a solid cloth of sculptural plasticine.

It is worth noting that the fiberglass has a deform property during operation. The reason is the impact high temperatures. To preserve the design form you need from inside Strengthen frame tubes. All unnecessary pieces of fiberglass must be removed, but it should be done after it is completely dry. If everything is done correctly and there are no other works, relative to the design, you can proceed to the equipment of the cabin and the electronics fastener.

If in the future it is planned to restore, then you can make a special matrix. Thanks to her, the process of manufacturing the body will be faster and easier. The matrix is \u200b\u200bapplicable not only to make the vehicle with your own hands from scratch, but also in order to improve the condition of the available car. Paraffin is taken for making. To get a smooth surface, it is necessary to cover it from top to top. This will increase the convenience of fastening parts for the new car body.

Attention! With the help of the matrix, the entire body is made. But there is an exception - this is the hood and doors.

Conclusion

In order to implement the idea and make the car with your own hands, there are a number of suitable options. Here will be useful all kinds of work details.

Do it yourself not only a car, but also larger and powerful truck. In some countries, the craftsmen manage to make money on this decent money. They make cars under the order. Cars with various original body items are in great demand.

How to make Porsche do it yourself:

There is no limit to perfection. This statement is well known to everyone and everyone. And any car owner seeks to make perfection from his car. For many factory installation drivers are not enough. They strive to bring something their own. What will distinguish them from the rest. But what to do, if what I want, you can not buy in the store? It suggests only one way out: you can not buy - do it yourself.

Steel recently very popular. They improve the appearance of the machine, change some specifications Or bring pleasant additions to the option. Among the entire variety of possible alterations, we suggest to consider several options.

Washing for cars

Let's start, perhaps, from the appearance. When the car is clean, its paint coating glitters and sparkles. It is nice to watch this technique. Immediately the feeling that the owner is watching his car. But it is not always possible to ride a car wash in various circumstances. In such cases, homemade for the car will come to the rescue. You can collect a small washing with your own hands, which can be used at any convenient time.

For the manufacture of washing, the following details will be required:

• canister with two plums;
• 2 m hose (suitable such as to connect a washing machine);
• watering pistol with telescopic barbell;
• fitting;
• spool;
• rubber gasket (outer diameter 2.4 cm, internal - 1.5 cm);
• coupling.

And now I will proceed:

1. In the lid canister make a hole. "Spool" smeared the sealant and insert into the prepared hole of the cover. Let dry.
2. In the second lid we make a small hole. It is necessary for the place of connecting the lid and the coupling process the sealant and also let it dry.
3. From the curved end of the bulk hose, we cut off the nut with the mount. The mount is no longer needed. On the nut we apply a sealant and secure it on the reverse side of the coupling. Sliced \u200b\u200bside hose Connect with quick-screen fitting nut. Next, the main fitting is tightened, which is also connected to the watering gun.
4. From the second side of the hose in the nut insert the rubber gasket. This will protect the system from air penetration. After that, the nut is screwed on the rapid fitting.

On this process of manufacturing homemade for the car, its own hands is completed.

Hairing seats

Homemade can also come in handy. Useful devices and crafts for cars allow you to replace the wear parts, supplement the interior with backlight and make much more. Consider the option how to update the seats.

This will require fabric. You can choose two colors - for the central part of the seats, the back of the back will suit beige leather (it will take about 4 m), and everything else will be black. Black leather is needed about 3.5 m. All the fabric needs to be duplicated (cry) with a layer of foam rubber 0.5 cm. The foam rubber is sick with a phlizelin. Due to this, it will work with it easier.

With removed seats (so more convenient) we remove the covers. Separate parts of them are numbered. In order not to get confused, we carry everything on paper. Also on paper, it is necessary to note the places of fastening of the spokes (they are on the reverse side of the covers). The spokes themselves later get into new covers.

Next, we deal with the trim on the individual details (we dissolve the seams). The patterns of the necessary elements are obtained. We decide on them on the involving side of the tissue (the invalid side up, so that the mirror reflection of the parts does not work) on dense paper (on wallpaper) and supply around the perimeter. At the edges, we leave the allowance of 1 cm, which will go on the seams. Then all patterns are cut and stitched (ranging from the center). From the back of any fabric, we make pockets where the needles are inserted.

By connecting all the details, we get new covers. Such a process is done alternately for all seats. By making such interesting and useful homemakes for the car with your own hands, you can upgrade the salon without contacting the service.

Ceiling update

You can also replace the skin on the ceiling. Homemade for the car in this case it is necessary to start with removal of the ceiling. It may take quite a lot of time. Fastening in each case individually. There is nothing complicated, the main thing is to inspect everything carefully and check all the details to remain integer.

When the ceiling panel is removed, the old fabric is cleaned with it. Preparing the material for the ceiling, you need to remember one important moment: From the wrong side, he should have a small layer of foam rubber. The tissue is sick with heat-resistant glue. When the glue dries, the panel can be installed back to the ceiling. Do it in the reverse order.

"Angel Eyes"

Collect electronic useful homemakes for cars with your own hands is quite possible. For example, "Angelic Eyes" will allow update the headlights of any car. For their manufacture, you will need:

• plastic transparent sticks (from blinds);
• resistors (220 ohms);
• battery (9 V);
• lEDs (3.5 V).

The process looks like this:

1. On any metal can, the same in diameter with headlights, screw the ring from plastic sticks using pliers. To do this, it is a little heated.
2. Next join a pair of LEDs and a resistor. Their performance is checked with a battery.
3. Another LED is connected to it.
4. On the frozen ring of plastic sticks make deep cuts.
5. Collect the ring, connect the LEDs, connect.

Conclusion

Homemade for the car with your own hands to gather for everyone. The main thing is to be confident in your abilities. Some information from our article, a bit of their reasoning and thoughts, and everything will work out. And the car from this will only be better. And doubly nice that it is done with their own hands.

Some motorists categorically do not suit cars produced by official manufacturers. And then they are solved on the creation of homemade cars, which will fully satisfy all the individual wishes of the owner. And today we will tell about the 10 most unusual similar vehicles.

Black Raven - homemade SUV from Kazakhstan

Black raven is perfect car For the Kazakh steppe. It is fast, powerful and undemanding to use. This unusual SUV was made from zero enthusiast from the city of Karaganda.

Black raven has a 5-liter engine capacity of 170 horse powerThanks to which the car can accelerate the speed of 90 kilometers per hour when driving around the rough terrain and off-road.

Angkor 333 - homemade electric car from Cambodia

Angkor 333 is the first fully electric carcreated in the kingdom of Cambodia. Surprisingly, that this car It is not the result of the development of the automotive industry in the country, but a private project of one person - a modest mechanic from the Phnom Penh.

Author Angkor 333 dreams that in the future it will open its own plant for mass production both electrical and gasoline variants of this car.

Homemade Batmobile from Shanghai

Fans of films about Batman from around the world dream of Batmobile - delightful on the design of the superhero auto, with a variety of diverse functions inaccessible to conventional serial machines.

And the engineer Lee Vailee from Shanghai decided to realize this dream with his own hands. He created a real batmobile that came out of cinema screens. At the same time, the Chinese spent less than 10 thousand dollars to build this car.
Shanghai Batmobile, of course, does not have ten different species Arms and does not go with a speed of 500 kilometers per hour, but appearance, he definitely repeats the Batman's car shown in the latest films about this hero.

Homemade Formula 1 Racing Char

The real car for racing Formula 1 is a huge amount of money - more than a million dollars. So in private possessions there are no such cars. At least official options. But the craftsmen from all over the world with their own hands create copies of racing cars.

One of these enthusiasts is the Bosnian engineer MISO KRUVVANOVICH, who spent 25 thousand euros to create a street car in the style of Formula 1. As a result, he turned out an incredibly beautiful car with a capacity of 150 horsepower, which can accelerate up to a speed of 250 kilometers per hour.
Drouzing on this red car through the streets of your city, Kuvdanovich received the nickname "Bosnian Schumacher".

Old GUO - a homemade car for $ 500

The Chinese farmer of Old Guo since childhood was fond of mechanics, but all his life worked as a farmer. However, after the fifty-year-old anniversary, he decided to go beyond the dream and began to develop a car of its own production, which was called in honor of the inventor - Old GUO.

Old GUO is compact copy Lamborghiniintended for the children's audience. But this is not a toy car, but real Machine from electric enginewhich can pass on one charge of accumulators up to 60 kilometers.
At the same time, the cost of one copy of the Old GUO is 5,000 yuan (just under 500 American dollars).

BIZON - homemade SUV from Kiev

Kiev resident Alexander Chupiliel along with his son for the year collected from spare parts from other cars as well original details Own SUV called them Bizon. Ukrainian enthusiasts have a huge machine with a 4-liter engine capacity of 137 horsepower

Bizon can accelerate 120 kilometers per hour. Fuel consumption in mixed mode This car is 15 liters per 100 km. In the SUV cabin there are three rows of seats on which nine people can accommodate.
The roof of the Bizon car is also interesting, which is built in the unfolding tent for overnight in the field.

Super Awesome Micro Project - LEGO homemade pneumomobile

The LEGO designer is so universal material that it can be constructed even a completely working car. At the very least, it managed to two enthusiasts from Australia and Romania, established the initiative with the name Super Awesome Micro Project.

Within its framework, they built a car from designer LEGO.which can move due to a 256-piston pneumatic engine that accelerates at the time of 28 kilometers per hour.
The cost of creating this car amounted to a little more than 1 thousand dollars, of which most of Money went to purchase more than half a million details of the LEGO designer.

Homemade student car on hydrogen fuel

Every year Shell suits special races among cars on alternative fuel sources. And in 2012, this competition won a car created by a group of students from Aston University in Birmingham.
Students built a car from plywood and cardboard, which is equipped with a hydrogen engine, producing water vapor instead of exhaust gases.

Homemade Rolls Royce Phantom from Kazakhstan

A separate direction of creating home-made cars is the construction of cheap copies of expensive and famous cars. For example, a 24-year-old Kazakh engineer Ruslan Mukanov built a visual copy of the legendary Limousine Rolls Royce Phantom.

While prices for real Rolls Royce Phantom start from half a million euros, Mukanov managed to build a car in just three thousand. In this case, its car is visually almost indistinguishable from the original car.
True, this car looks very unusual on the streets of the provincial Kazakh mines.

Upsede Down Camaro - car up legs

Most creators of homemade cars lead the desire to improve the visual and technical component of the serial car. The American Racer and Speedycop engineer pushed out of opposite principles. He wanted to worsen the appearance of his car, turning it into something unimaginable funny. So there appeared a car with the name of UPSIDE DOWN CAMARO.

UPSIDE DOWN CAMARO is Chevrolet Camaro. 1999 with inverted upside down. The car was created for parody racing 24 hours Lemon (24 hours of lemons), in which only cars worth not more than 500 American dollars can take part.