Original BMW 0W40 oil. Life is gaining momentum. Like my BMW. Mixing oils: Avoid or stick

BMW TWINPOWER TURBO LONGLIFE-01 Motor oil FE SAE 0W-30.

Fully synthetic engine oil, produced based on GTL gas-liquid conversion technology. The original Motor oil BMW Longlife-01 Fe 0W-30 is specifically designed, manufactured and tested to fully disclose the potential of BMW engines, providing their higher performance features and protection. Compared by S. standard products The engine oil BMW Longlife-01 Fe 0W-30 provides improved fuel efficiency, which fully allows BMW engines to implement the capabilities of EfficientDynamics technologies.

Benefits:
- Proven fuel savings with gasoline engines according to the parameters of the new European Riding Cycle NEDC accounts for at least 1.0% higher than BMW Longlife-01 products.
- stability of performance in a wide range of operating temperatures and engine loads, even in extreme operating conditions.
- Lighter cold launch at negative temperatures.
- The patented technology of active cleansing protects against the formation of sediments and corrosion, thus extended the service life of the engines.
– High level Wear protection.

Applicability:

- For gasoline engines since 2002 release. Currently this: N1x, N2x, N4x, N54, N55, N63, N74 and others.

BMW tolerance: LongLife-01 Fe
SAE viscosity class:SAE 0W-30
Quality class by ACEA: A5 / B5.
Quality class by API: SN.

Motor oil BMW M TwinPower Turbo SAE 10W-60.

BMW M TWINPOWER Turbo SAE 10W-60 engine oil is created specifically for BMW M engines.
Thanks to the use of innovative production technology basic oils GTL provides engine protection at the level, superioring industry standards. This engine oil maintains the optimal purity of the BMW M engines and allows you to fully use their potential.
Motor oil passed complex tests and allowed to use in BMW M Engines.
This engine oil is made by a BMW concern to use as a all-season.

Benefits:
- Provides exceptional dynamic quality engines BMW M.

Applicability:
Apply strictly in accordance with the instruction manual for your car!
Suitable for M5 / M6 / Z8 with the date of release until 2010 inclusive. For M3 - until 2013 inclusive.

BMW tolerance: BMW M.
SAE viscosity class: SAE 10W-60
Quality class by ACEA: A3 / B4.

Motor oil BMW M TwinPower Turbo Longlife-01 SAE 0W-40.

BMW M TWINPOWER TURBO LONGLIFE-01 SAE 0W-40 engine oil is created specifically for BMW engines, as well as for engines BMW M new generation. Thanks to the use of innovative technology for the production of GTL base oils, the engine is protected at a level that exceeds industry standards. This engine oil supports the optimal purity of BMW and BMW M engines and allows you to fully use their potential. Motor oil has passed complex tests and allowed to use in BMW engines, as well as in the BMW M engines of the new generation. This engine oil is made by a BMW concern to use as a all-season.

Benefits:
- Provides exceptional dynamic quality engines BMW and BMW M.
- Confident start of the engine at low temperatures.
- Excellent wear protection.
- The patented active cleaning technology protects against the formation of sediments and corrosion, thus extended the service life of the engines.

Applicability:
Apply strictly in accordance with the instruction manual for your car!
- for gasoline engines and BMW diesel engines without squeeze filter.
& ndash for all bMW cars M, except:
- M5 / M6 with the date of release until 2011
- M3 with date of release until 2014

BMW tolerance: Longlife-01.
SAE viscosity class:SAE 0W-40
Quality class by ACEA: A3 / B4.

Engine oil BMW TwinPower Turbo Longlife-01 SAE 5W-30.

BMW TWINPOWER Turbo Longlife-01 SAE 5W-30 engine oil is based on GTL technology. This ensures the protection of the engine at the level, which is superior to industry standards. This engine oil supports the optimal purity of BMW engines and allows you to fully use their potential.

Benefits:

- Confident start of the engine at low temperatures.
- Excellent wear protection.
- The patented active cleaning technology protects against the formation of sediments and corrosion, thus extended the service life of the engines.

Applicability:
Apply strictly in accordance with the instruction manual for your car!
- For all BMW gasoline engines.

BMW tolerance: Longlife-01.
SAE viscosity class: SAE 5W-30
Quality class by ACEA: A3 / B4.

Engine oil BMW TwinPower Turbo Longlife-04 SAE 0W-30.

Motor oil BMW TwinPower Turbo Longlife-04 SAE 0W-30 is based on GTL technology. This ensures the protection of the engine at the level, which is superior to industry standards. This engine oil supports the optimal purity of BMW engines and allows you to fully use their potential.
In comparison with ordinary motor oils, it is characterized by improved viscous temperature indicators, providing high fuel efficiency.
New BMW original engine oil allows you to use the full potential of BMW engines.
This engine oil has passed comprehensive tests and is approved by the BMW concern as the All-season.

Benefits:
- Stability of performance in a wide range of operating temperatures and engine loads.
- Confident start of the engine at low temperatures.
- Excellent wear protection.
- The patented active cleaning technology protects against the formation of sediments and corrosion, thus extended the service life of the engines.

Applicability:
Apply strictly in accordance with the instruction manual for your car!

BMW tolerance: Longlife-04.
SAE viscosity class: SAE 0W-30
Quality class by ACEA: C3.

Motor oil BMW TwinPower Turbo Longlife-04 SAE 5W-30.

BMW TWINPOWER Turbo Longlife-04 SAE 5W-30 engine oil is based on GTL technology. This ensures the protection of the engine at the level, which is superior to industry standards. This engine oil supports the optimal purity of BMW engines and allows you to fully use their potential.
In comparison with ordinary motor oils, it is characterized by improved viscous temperature indicators, providing high fuel efficiency.
New BMW original engine oil allows you to use the full potential of BMW engines.
This engine oil has passed comprehensive tests and is approved by the BMW concern as the All-season.

Benefits:
- Stability of performance in a wide range of operating temperatures and engine loads.
- Confident start of the engine at low temperatures.
- Excellent wear protection.
- The patented active cleaning technology protects against the formation of sediments and corrosion, thus extended the service life of the engines.

Applicability:
Apply strictly in accordance with the instruction manual for your car!
- For all Diesel engines BMW with a soup filter and without it.
- Application B. gasoline engines BMW.
permissible only in the EU region, including Norway, Switzerland and Liechtenstein.

BMW tolerance: Longlife-04.
SAE viscosity class: SAE 5W-30
Quality class by ACEA: C3.

Engine oil BMW TwinPower Turbo Longlife-12 Fe SAE 0W-30.

BMW TWINPOWER TURBO LONGLIFE-12 FE SAE 0W-30 engine oil contributes to fuel economy, supports optimal purity, provides high degree BMW engines protection and allows you to fully use their potential.
The LOW-SAPS formula provides protection for the diesel engine filter from contamination.
This engine oil is designed specifically for BMW car engine and differs from conventional engine oils in the fact that it will fully allow the engines to implement the features of EfficientDynamics technologies.
Motor oil passed comprehensive performance tests and allowed to use BMW concern as energy-saving and all-season.

Benefits:
- proven fuel economy diesel engines According to the parameters of the new European Riding Cycle, the NEDC is at least 1.5%.
- Stability of performance in a wide range of operating temperatures and engine loads.
- Confident start of the engine at low temperatures.
- Excellent wear protection.
- The patented active cleaning technology protects against the formation of sediments and corrosion, thus extended the service life of the engines.
- Low oil flow rates.
- a new composition of a package of additives with a reduced content of substances forming ash.

Applicability:
Apply strictly in accordance with the instruction manual for your car!
- This oil is allowed to use only for certain models of diesel and gasoline engines BMW new generation. For information on applicability, refer to your BMW dealer.
- The use of BMW gasoline engines is permissible only in the EU region, including Norway, Switzerland and Liechtenstein.

BMW tolerance: Longlife-12 Fe
SAE viscosity class: SAE 0W-30
Quality class by ACEA: C2.

Engine oil BMW TwinPower Turbo.

Motor oil is one of the most important operational materials of modern high-mounted BMW engines. BMW engines traditionally impose very stringent requirements for its properties. In order to be allowed to use, the engine oil must have not only excellent lubricators, but also have special properties and perform a number of necessary functions:

• Energy Saving

  Oil should allow the engine to work using Efficient Dynamics technology: help reduce internal losses, raise fuel efficiency and provide exceptional dynamic qualities. New Specifications of BMW LL12FE motor oils and BMW LL14FE + allow new and promising BMW engine models to achieve unsurpassed fuel and economic indicators.

• Melting

  During operation in the engine, various contaminants are inevitably formed. The oil must wash off and remove them to the oil filter, not allowing the formation of deposits.
  

• Anticorrosive

  The oil should protect against corrosion and not be aggressive to friction surfaces and engine parts.
  

• Launchers and viscosity

  Oil must work equally well in the conditions of cold engine launches at extremely low temperatures and in working conditions when high temperatures, as well as on high speed.
  

• Cooling and sealing

  Any engine BMW. - the brainchild of high innovative technologies. In the process of operation, some friction surfaces are heated to very high temperatures and oil should continuously allocate the highlighted heat. Also, the oil carries in itself the function of the combustion chamber seal, allowing you to achieve the magnificent power and fuel and economic characteristics of the engine.
  

• Durability

  The oil is one of the main operational materials to ensure the operation of the engine, therefore resistance to oxidation, low aging speed and low oil consumption for avgar are one of its key qualities.

The entire spectrum of these characteristics was taken into account by BMW engineers when developing new original engine oils. Created by newest ruler Oils absorbed all the most advanced achievements from the field of technologies for the production of motor oils. The entire ruler covers needs and takes into account the features of the operation of BMW cars in many corners of light. It also concerns countries with a harsh climate and unstable fuel quality, where high risk of failure of expensive elements of a system to reduce the level of toxicity of exhaust gases. The basis of the production of original Motor oils BMW is a GTL * technology complex that allows you to obtain crystal clear basic oils from natural gas.

Therefore, using the original BMW TWINPOWER Turbo engine oil, you can be in full confidencethat the engine of your car is under protection high technologies Even in the most difficult modes and operating conditions.

1. Attend your official dealer BMW. For the next replacement of the original motor butter BMW. TwinPower Turbo through the mileage interval prescribed by the manufacturer, or following the instructions on-board computer Your car;
2. Control the level of engine oil at least once every two weeks, using the measuring probe of your BMW. Electronic system Automatic control of the level and quality of the oil will inform you in a timely manner of the need for topping or replacing the oil.
3. Get the original BMW TWINPOWER Turbo engine oil only in official BMW dealerships. Only this way you can protect yourself and your car from counterfeit products and get the highest quality items.

According to the developed classification car oils From the leaders of European manufacturers, the Motor oil BMW is fully and fully complies with ASEA criteria, namely, according to the regulated quality classes A3 / B4, C2 and C3.

Absolutely all modern lubricants, like BMW engine oil, are developed by the concept of preferences for these manufacturers, where the BMW autoconecern acts actually and other companies known to the world.

It is no secret that the lubricant is necessary in order for the engine to work most efficiently, and for this this parameter as viscosity must fully comply with all criteria. Due to the viscosity, which will form the thickness of the oil film on the inner surface of the motor. That is the higher the viscosity rate original oilMoreover, the formation of a protective film in an engine with a thicker layer occurs.

For motors bMW brands Increased viscosity can play not only too high consumption of lubricants, but also due to increasing friction and increase temperature loads on piston system, the service life of some details.

If this parameter becomes below optimal, the film accordingly becomes as thin as possible, in view of which the engine appears on the engine.

For almost all models BMW releaseStarting from 2001, (excluding the motors S54, S62 / 39 and M43 / CNG), allowable viscosity of the oils - 0W30.0W40 and 5W30, 5W40.

Recommendation. The more auto mileage, the higher it is recommended to use viscosity indicator, but within the ranges described. Again in the conditions of the Russian Federation, in the cold time, more relevant lubricants 0W30 and 0W40.

Composition of synthetics and semi-synthetics for BMW

The most important thing in any oil is additives. It is they that improve the characteristics of any engine oil and take up to 1/5 of the total composition of the total composition, in particular LongLife 01.

As for the% ratio, it changes on the basis of the basic oils:

1. Special additives to reduce BMW motors wear.
2. Washing additives.
3. Chemicals, at the expense of which the mechanism is included with a reduction friction.

Increased resistance to chemical interactions of the original BMW oil is provided by special technology, which is based on the creation of substances with a complete spectrum of specified properties and a special molecular structure.

Depending on the composition of the oils and their chemical components, the synthetics are divided into several types of varieties. Despite this, all types of lubricant have a general direction to protect the BMW motor:

• At low temperatures.
• With overheating.
• Despite the negative impact, any oil should remain radiant to decomposition and oxidation.
• Do not allow on the details of the engine of the nagar formation.

As for semi-synthetic lubricants, this definition means that mineral and synthetic bases are applied in their manufacture at the same time. Regarding% ratio, accurate regulations are not available. Depending on the conditions, the semi-synthetic can be both 50/50, 80/20 and 30/70. The price of such oil is naturally lower than on synthetic lubricants. With quality, the situation is similar.

How to choose oil for bmw

Many owners car BMW Often, do not know what to be guided in the choice of lubricant, such as synthetic or semi-synthetic. In fact, it all depends on many factors that need to be considered. First of all, attention should be paid to the general state of the motor, and in what conditions it is to be operated.

Most often, preferably for BMW engines are semi-synthetic lubricants. It is the oils of this series are more relevant for conditions with frequent reduced temperatures, as well as for those cars in which the mileage is from 100,000 km.

If the operating conditions of cars are tougher and the mileage of them is minimal, from the semi-synthetic one should refuse synthetic lubricants, for example, for BMW it is:

1. LongLife 01 5W30.
2. LongLife 010 W40.
3. LongLife 04 0W30.
4. Longlife 04 5W30.

These oils are the best for BMW:

• They do not absorb the air.
• Possess excellent resistance to temperature drops.
• Sustainable oxidative processes.
• And they have excellent lubricants.

If these oils compare with numerous analogues carefully, you can see that they are not much more expensive. But due to the fact that there is a minimum waste on the volunteer, LongLife 01 and its analogs have a much less consumption than any other synthetic lubricants, in addition, due to all these properties, the recommended interval for replacing lubricants to 30,000 kilometers is increasing, which cannot Do not rejoice.

Naturally, all these calculations were made for the conditions within European countries, as for russian roads and climatic features the replacement of oils should be made on the basis of:

• The nature of driving the owner of the car.
• Male car.
• It is necessary to take into account whether interaction with road reagents and if so how often.
• The state of the road canvase.
• And which% of the total time is on traffic jams.

Do not forget when calculating the replacement interval lubricant and about the quality of the fuel used.

It is important to remember that the original synthetic lubricants can be changed much less often than mixed type oils. It should also be borne in mind that the LongLife 01 tolerance includes both clean synthetics and mixed type options. There is only one condition - complete correspondence in the nature of the additives and in viscosity indicators.

As for the common question, is it possible to mix the types of oils in engines BMWDespite the fact that the owners are often admitted, manufacturers categorically insist about the inadmissibility of such actions.

Mixing oils: Avoid or stick

Any specialist will confirm that it is not recommended to mix synthetics and semi-synthetic in principle. The fact is that the properties of these base oils, completely different and not in contact between the goals. In view of this, the most unforeseen situations may occur, with chemical reactions, to predict which is simply unreal.

That is, it can happen anything from the rapid growth of slag formation in the motor before its complete failure. If there are situations in which mixing cannot be mixed, it should be taken into account that the viscosity of the oils was the same.

Even if the car is visually operated without changes and the engine does not show negative consequences, it is necessary to drive a car into service in the shortest time to the service where it is complete and replacing the original oil, in this case on LongLife 01.

Immediately it should be noted that the cleansing of the motor can occur independently, unless of course used BMW 0W40 Longlife 01 oil and other original lubricants. This is achieved by the specifically provided by the composition of additives.

Regarding the emergency washing of the engine, if it is necessary, then only:

• Subject to the change of viscosity of lubricant material.
• Replacement of composition.
• When changing the manufacturer of engine oil.
• Either when purchasing a car with hands.

To ensure the replacement approach, you should act according to the instructions:

• To begin with, carry out a complete drainage of the existing oil in the system.
• Pour the original recommended oil 0W40 LongLife 01.
• After 2 - 3 day operation, replace the lubricant.
• And further reduce the recommended period of oil change by 100%.

If a car bMW series It is purchased in a second-hand state, the manufacturer recommends replacing and oil filter.

Video: BMW 0W40 oil LongLife 01