Motor oil Shell HX7 10W 40. Shell Helix HX7 engine oil. Basic characteristics and scope of NX6

the main / Driving

How to find universal engine oil, which will be evenly lubricated to all engineering engine areas? The answer is the famous company Shell. The market for fuel and lubricants is presented semi-synthetic lubricant Shell Helix HX7 5W40, having high cleansing abilities. The mixture is intended for almost any type of engine.

Shell Helix HX7 5W-40

Automotive shell oil HX7 5W40 is a semi-synthetic composition, which includes mineral and synthetic base oils. Speaking about the parameters of the composition, the mineral base is not made of hydrocarbons, but from natural gas. And this indicates the purity of the product obtained.

The basic composition introduces an active set of Active Cleansing additives to maintain the purity of the internal decoration of the engine. In addition, the introduced complex of additives prevents the early wear of the engine parts, which helps to reduce the consumption of fuel and lubricant itself.

An increase in service life contributes to the stable viscosity of the composition, which remains throughout the entire period of operation. Oil film motor fluid Resistant to high loads and temperature effects.

The car mixture has good fluidity in the frost, does not dilute in the heat. Therefore, there will be no problems with starting the engine at any time. Car motor is protected from the first seconds of work.

But the main indicator in oil properties are cleaned parameters. If, when using poor-quality lubricant, the engine begins to work properly and there is a huge number of contaminants, then Lubricant Shell Helix is \u200b\u200bable to quickly resolve this problem. All pollution split into small particles and washed out of the system. Thanks to the dispersing properties of oil, all the contaminants are in suspension, without giving them to settle on cleaning filters and valves. It is noteworthy, but the oil is not thick with polluting components, and this allows you to maintain the engine performance for a long time.

The lubricant is designed for power aggregates of lightweight transport, "feeding" gasoline, diesel fuel, gas, biodiesel and ethanol-based mixtures.

The consumable material is designed for various working conditions, but it is particularly well it manifests itself in an environment of elevated loads and urban start-stop mode. In urban environments, the car has to constantly stop - on the traffic light, a pedestrian zone or in traffic. Similar operation of the car adversely affects the working units of the motor. At the time of the vehicle idle, all lubricants flow into the base of the crankcase, so when moving a second working surfaces power aggregate Stay without lubricant, and this is fraught with premature wear. Lubricant does not flow into the pallet of the crankcase, and forms a strong oil film on the surface of the engine's working parts, thereby avoiding the oil hunger of the mechanisms.

Specifications

Machine oil Shell HX7 5W40 has the following specifications:

IndicatorValue
The density of the substance under standard conditions, kg / m³ at 15 ℃843,3
Viscosity, CST:
at 40 ℃ / 100
87,42/14,45
Viscosity modifier172
Solidification substance, ℃-45
Inflammation, ℃242

The crystallization of the semi-synthetic component occurs at very low temperatures. This indicator does not all boast, even some synthetic oils, the temperature of frozen above this mark.

Approval, tolerances and specifications

SHELL HELIX HX7 5W 40 motor fluid has compliance:

  • SN / CF API;
  • ACEA A3 / B3, A3 / B4;
  • Jaso SG +.

OEM-Tolerances of automakers:

  • MB 229.3;
  • VW 502.00 / 505.00;
  • GM LL-A / B-025;
  • RN0700, RN0710.

Responsible to the declared requirements of Fiat 9.55535-N2 / 9.55535-M2.

Release form and articles

Manufacturer Releases consumables in different packaging. Each shell Helix HX7 5W40 lubricant is assigned personal rooms for convenience of order.

How 5W40 is decrypted

The manufacturer in the product marking indicated the viscosity-temperature modifiers in which the consumables retains technical specifications. The W letter W shows that lubricant is suitable for use in winter time Years, that is, is all-season. Figure 5 defines the frost resistance of the consumor. In the case under consideration, the engine oil retains its operating parameters to -30 degrees of cold. The digit on the right, on the contrary, shows the stability of viscosity up to 40 degrees of heat.

The permissible temperature range of the consumility from -30 to 40 degrees Celsius.

Advantages and disadvantages

Motor semi-synthetic liquid Shell Helix NH7 5W40 took all the best from synthetic and mineral oils. Practically nothing is inferior to 100% synthetics, frost resistance and cleansing the mixture at the height.

Among the advantages of this engine fluid are distinguished:

  • High performance indicators;
  • Good balance of mineral synthetic base and package of modern additives;
  • Excellent washing-dispersing ability;
  • Excluding the formation of new deposits and precipitation;
  • Regeneration of the motor system of the car after poor quality lubrication;
  • Protection against friction between working surfaces, which prevents their early wear;
  • Stability of performance characteristics in all operating conditions;
  • High-quality motor protection in urban start-stop mode;
  • Increased lubricant replacement interval;
  • High resistance to corrosion and oxidative processes;
  • Easy engine launch in frost;
  • Minor inchar and its evaporation;
  • Universality of use, compatibility with different species Fuel and power plants.

Minuses at Shell Helix HX7 5W 40 are available. But they are purchased in different circumstances. It all depends on the nature of driving, the type of motor system, the brand and the operation time of the car. The disadvantages of lubricants are counted:

  • Motor oil It cannot withstand the test of the cold in the northern regions of Russia, it freezes below 40-45 degrees. Therefore, for the northern regions, it is necessary to find something more substantial;
  • It is impossible to achieve perfect purity. Such active cleaning is available only to synthetic oils. The ratio of this lubricant to Nagaru is softer and gentle. When used, it must be considered.

How to distinguish fake

Distinctive signs of original oil

Falsification today can be found on the shelves of any store. The effect of the use of poor-quality goods is always sad, it all depends on what is flooded in an oil canister. At best, the car simply does not start in the frost, at worst - you have to capitalize the engine.

Recently, the manufacturer has taken a new generation container, for better protection against counterfeit products. Old packaging is still found on sale. The main distinguishing features of the engine fluid in the new packaging look like this:

  • Original packaging is not transparent. Container is distinguished by blue, red, gray, yellow colors;
  • The surface of the container should be smooth and high-quality, without visible defects;
  • The PurePlus logo has a glossy look, you can see your reflection;
  • The manufacturer's cipher is fixed on a white field from all sides;
  • Figures of the issue must begin with the value of 50, regardless of the place of manufacture;
  • An explicit feature of the originality of products is a special batche code, which indicates a party, place and time of release. If it is absent on the place free from the label, then this is a sign of falsification;
  • For visual inspection Original All images are bright, also should not be detected errors in the text.

After the purchase, the consumables must once again double-check the houses on visual defective signs. To protect yourself from handicraft products, it is necessary to buy lubricating products only from proven sellers.

Reliable oil for any conditions.

Imagine the perfect engine oil. What is it? Probably all-season, suitable for both winter and summer. It also cleans the engine, but gently and carefully. It can be pouring into an SUV and in a passenger car. In the engine of a honey old man with big mileage And in shining cleanliness, just descended from the conveyor a new motor ... If such an oil and exists, it is very similar to the description on Shell Helix HX7 10W40. The main thing is not to evoke to the fake.

Canister 4 liters of a new sample (release from 03.10.16)

Description of oil

Shell semi-synthetic engine oil Helix HX7 10W40 took all the best from "synthetics" and "mineral water". Created along the unique PurePlus technology from natural gas, it has flawless purity, compared with oil-hydrogen counterparts. This technology is the only one of its kind. She is patented by Shell and has no analogues in the world.

Active cleaning additives Active Cleansing is another invention of the manufacturer used in this product. Thanks to these two technologies, the engine is reliably protected from nagar formation, oil cleans it and subsequently supports cleanliness without losing efficiency from replacement to replacement.

The oil is almost not spent on the Nagar and evaporates little, which allows you to practically not add it to the period between replacements. It retains stable viscosity performance throughout its service life.

Focused primarily on cars such as foreign and Russian, operating on gasoline and gasoline mixtures, as well as on diesel and bio diesel fuel and natural gas. It is possible to use it and in SUVs. Suitable for any cars regardless of age. Received concerns Ferrari, Volkswagen, Renault and Fiat. It is also used by other famous European car manufacturers.

Canister 1 and 4 liters of old sample (release until 03.10.16)

Specifications

Shell Helix HX7 10W-40 oil Specifications have the following:

IndicatorMeaning / Lessonation
1 Kinematic viscosity at a temperature of 40 ° C96.31 CST
2 Kinematic viscosity at a temperature of 100 ° C14.37 CST
3 Viscosity index154
4 Dynamic viscosity at -30 ° C (MRV)21100 SP.
5 Density at 15 ° C860 kg / m3
6 Flash temperature246 ° C.
7 Frozen temperature-45 ° C.

Some characteristics of the product, as well as its specifications, can change from time to time and be inaccessible in the territory of the Russian Federation.

Tolerances and specifications

The product has the following specifications:

  • SN / CF API;
  • ACEA A3 / B3, A3 / B4;
  • Jaso SG +;
  • MB 229.3;
  • VW 502 00/505 00;
  • RENAULT RN0700, RN0710.

Maintains the requirements of FIAT 955535-G2.

Old sample canister (left) and new (right)

New canister

Shell 03.10.2016 announced the beginning of the production of a canister with oils of a new sample. Old canisters are still found on store shelves, but new ones are already supplanted. Here are the main differences between the new canister from the old:

  • new label design;
  • other form of canister itself, more resembling a trapezium, new neckline;
  • new cover with a hologram applied to it with a protective 16-digit code or QR code. On this code, on the manufacturer's website, you can determine the authenticity of a particular canister;
  • corrugated handles and throat.

Release form and articles

  1. 550040312 Shell Helix HX7 10W-40 1l
  2. 550046365 Shell Helix HX7 10W-40 1l (New Canister)
  3. 550040315 Shell Helix HX7 10W-40 4l
  4. 550046360 Shell Helix HX7 10W-40 4l (New Canister)
  5. 550040008 Shell Helix HX7 10W-40 20l
  6. 550040119 Shell Helix HX7 10W-40 55l
  7. 550046522 Shell Helix HX7 10W-40 55l
  8. 550040009 Shell Helix HX7 10W-40 209l

The viscosity schedule of oils depending on the ambient temperature

How 10W40 is decrypted

Shell Helix HX7 10W40 Oil All-season, judging by its marking. The letter W (Winter) tests about all-season. Figures 10 and 40, in turn, talk about what as low as possible and maximum high temperaturesoh, it retains optimal viscosity performance. Namely: figure 10 means that the lower threshold of oil is located at minus 20-25 degrees Celsius, and the upper (indicator 40) is plus 35-40.

Advantages and disadvantages

Shell Helix NH7 10V40 has absorbed all the best qualities that are in synthetic and mineral oils. This is what positive aspects It possesses:

  1. Universality. Can be used in passenger cars and SUVs; in Russian and foreign; In old and modern, and working on any form of fuel. In addition, it can be used both in winter and in the summer, in the city, on the highway and off-road.
  2. Effective engine protection. This lubricant protects the engine from almost all negative processes that may occur in it: from wear, corrosion, harmful deposits, oxidation. Due to the extension of the engine life in general and its individual details.
  3. Economy. Due to its low evaporation, the oil is consumed economically, almost not spent on the Nagar and rarely requires topping between full replacements. Replacements can be carried out less often, because the viscosity of the product remains stable throughout the service life. Promotes fuel economy.

In addition, this oil is cheaper than completely synthetic products of Shell, and has a stable viscosity, practically independent of changing external conditions, which allows it to be used for any weather, temperature and on any road.

Shell HX7 10W-40 and disadvantages:

  • not so effective in severe frosts;
  • not so well cleans the engine as pure synthetics;
  • not suitable for high-tech engines.

Many car owners note that after changing the manufacturer's plant, the quality of the oil became much worse. What is caused, unknown.

In general, we can say that this product is the optimal combination of price and quality. It meets most of the requirements of car owners, thanks to which many people give preference to him.


How to distinguish fake

Production of the company Shell is a real magnet for fraudsters. Motor oils of this manufacturer are among the most frequent in the world. Shell NH7 10W-40 is no exception.

A sure way to protect yourself and your car from the acquisition of fake, it is to buy lubricants Only from verified vendors. Large specialized stores also cannot give a 100% guarantee that the fake will not be "leaning" to them. However, purchasing oil in doubtful eaters, with hands, on the market, on spill, you risk significantly more.

When buying, inspect the container. Of course, it should be branded, in this case blue, with a company logo, full output. Refuse to acquire a lubricant in a simple plastic bottle, even if it was poured from a barrel with branded signs.

The packaging should be a whole, not have obvious defects. If the canor is opened, it can always be noticed on scratches, chips on the lid, disturbed and loosely adjacent connective ring. Plastic Shell packs is always high quality, dense, even color without transitions and stains. The color of the lid completely coincides with the color of the canister. The packaging of the company uses only four colors: blue, gray, yellow and red. Another color canister testifies to fake.

Here are three points that guaranteed to help identify the fake:

  • ring at the original adjacent to the lid, in the fakes between them, the gap;
  • the emblem with the name of technology at the original is covered with mirror spraying, there is no fake;
  • the barcode at the original is always surrounded by a white field from four sides, for fakes only with three.

If something causes doubts, refuse to buy. High-quality engine oil is a guarantee of good car work.

  • branded gas stations "Shell";
  • large supermarkets (Kemp, Aga, Auchan, Crossroads, Ribbon, Okay, etc.).

Read 8 min.

Clean, maximum performance, frost resistance and resistant protection against wear. What else is needed by the engine for good work and have a good mood? Only love and care of the owner. If you don't buy it for any money, then everything else is please. Sold in a plastic canister of different volumes, with a twisting cap and a bright label. Called Shell Helix HX7 10W-40.

Description of oil

Updated Kanister 4L

Shell Helix 10V40 - Synthetic or semi-synthetic? This question is asked by many motorists who choose this engine oil. The fact is that, according to the manufacturer, it is produced by synthetic technology. But does the technology make it pure synthetics? Not. The composition is also important, and there are synthetic and mineral base oils there, which in combination with each other increase the productivity of the finished mixture. Thus, it turns out that this lubricant is semi-synthetic.

However, it is necessary to immediately say that in its properties it is as close as possible to the synthetics. What other oils will have such magnificent lubricants? This product creates a particularly solid oil film on the surface of parts, which significantly reduces friction and effectively protects parts from premature wear. The film is durable, stable, under any conditions - even the most extreme - it remains in its place and continues to perform their work.

The viscosity of the lubricating fluid Shell Helix HX7 10W-40 also remains stable, regardless of the test engine of the test. In the heat, the oil does not dilute over the norm, evaporates and treats at a minimum. The frost does not hush, keeps excellent fluidity, providing a slight start of a cold motor and quickly distributed through the system.

A separate conversation is the magnificent cleaning additives added to the product. These additives are their own development of the company. If you used to use poor-quality lubricants, then different slurry and varnish sediments could remain inside the engine, Nagar. In order for the engine to start working fine, you need to get rid of them. Shell NH7 10W-40 effectively and quickly split these sediments. And what then? Probably, oil thickens and becomes unsuitable for further use? Not at all. Due to the excellent dispersing ability, this liquid can keep in itself, in suspension, sage particles, without changing their properties and viscosity. At the same time will not let them settle, score valves and filters. And also will prevent the formation of new deposits.

This engine oil matches all modern standards and standards. For properly operation And utilization does not carry dangers for humans and the environment.

High quality, excellent properties The product confirm tests and laboratory tests, repeatedly carried out. Well, for a potential buyer, it will be important will be reviews of car owners who chose this oil.

Specifications

Indicatorunit of measurementValueVerification method (ASTM)
1. Vissed characteristics
Kinematic viscosity at 100 ° CcST14.37 ASTM D445.
Kinematic viscosity at 40 ° CcST96.31 ASTM D445.
Dynamic viscosity at (MRV) -35 ° CsP21100 ASTM D4684.
Viscosity index 154 ASTM D2270.
Density at 15 ° Ckg / m3.860 ASTM D4052.
2. Temperature characteristics
Flash temperature° C.246 ASTM D92.
Frozen temperature° C.-45 ASTM D97.

Application area

Canister 4 liters of old sample

Butter motor Shell. HELIX HX7 10W40 is applicable in a wide range of passenger cars. vehicle. Oil purpose - modern enginesworking on gasoline, diesel fuel (except for those equipped summary filters), as well as varieties that function on natural gas, biodiesel, gasoline mixtures with ethanol.

Shell HX7 10W40 lubricant applies to different conditions operation and for different ride styles. Well shows itself both in the city - in mode with frequent stops on traffic lights and traffic jams, followed by start and the city, on the highway, at elevated speeds and facilities. But this substance manifests itself especially well in extreme conditions, with serious engine loads. It can be both road adverse conditions and climatic. Elevated speed, high loads, maximum power - in all these cases Shell HX7 10W-40 provides reliable protection Motor from wear, helps him reveal its potential, increase the efficiency, and also to express himself as much as possible.

Approval, tolerances and specifications

Specifications:

  • SN / CF API;
  • ACEA A3 / B3, A3 / B4;
  • Jaso SG +.
  • MB 229.3;
  • VW 502 00/505 00;
  • RENAULT RN0700, RN0710;
  • Complies with the requirements of 955535-G2.

As deciphered 10W-40

This lubricating fluid is applicable in a wide range of temperatures. Thanks to a stable viscosity, it does not dilute, not thick, almost does not burn and does not evaporate. And what else is needed for year-round use of lubrication? This is what can tell the decoding of the viscosity labeling of this substance 10W40.

For the beginning - the letter w. It is noted all lubricants that can be used in winter. Because it comes from the English word "Winter" - Winter. Since the numbers stand on both sides of it, it means that the lubrication of year-round use. The number standing at the beginning is the viscosity indicator of the substance in SAE at minus temperatures. To calculate, to which "minus" viscosity will remain stable, you need to take away this number from forty. In our case, forty minus ten will turn out to be thirty. It means that it is best to use the product to minus 30 degrees Celsius.

The number behind the letter denotes the temperature with a plus sign, to which the viscosity of the substance will also remain stable. Thus, it turns out that this engine oil is best used in the temperature range from minus 30 to plus 40 degrees Celsius.

Advantages and disadvantages

In order for the buyer to choose this or that other engine oil and began to use only them, the product should have something that distinguishes him from competitors. Here are the advantages of Shell Helix HX7 10W 40:

  • optimal combination, balance of mineral and synthetic ingredients;
  • the highest level of operational characteristics;
  • unique detergent additives - the company's own development;
  • effective removal of contamination;
  • excellent dispersion ability;
  • preventing the formation of new deposits;
  • extending the engine life, an increase in its efficiency;
  • effective protection against engine wear, even in the most extreme operating conditions;
  • wide temperature Range use;
  • a significant reduction in friction inside the motor;
  • increased oil resistance to oxidation and destruction;
  • long replacement interval;
  • good low temperature fluidity;
  • stable viscosity;
  • ensuring light cool engine start;
  • promoting a rapid warm engine warming;
  • low evaporation and minimal consumption on the avgar.

Judging by the reviews in winter, this product has shortcomings. In particular, many noted that with cold weather, the lubricant is thick, which makes it difficult to start the engine. That is, viscosity in fact is not so stable as promised by the manufacturer. And of course, many are not satisfied with the overestimated product price and a large number of fakes. How to protect yourself in this regard, read further.

Release form and articles

How to distinguish fake


Protective sticker on oil lid

Motor oils Shell are popular among fraudsters. Meet fake these products can be very often. And the use of such incomprehensible fat fraught unpleasant consequences For the motor and, as a result, for the wallet of the owner of the car. Using fake oil Capably anyone to dismiss from this brand forever.

But the company Shell worries about his reputation and its consumers.

Important! To distinguish a fake, a special protection system has been developed. From 03.10.2016, new cans with an improved fake protection system arrived. A special 16-digit code is applied to the hologram on the cover of the canister. If you enter it on the site www.ac.shell.com, the product authentication will come. If the system, without giving a response, redirect the user to the official website, then it is a fake.

However, it is possible to take this opportunity only if you buy an ill-fated canister. After all, to see the code, you need to beat the protective sticker. No one will allow in the store to check all the canisters in a row to each coming. Therefore, it is important to learn to distinguish the original by appearance Packaging.

Oil script later than 2016 (this year the canisters changed) necessarily has a mirror hologram with an indication of production technology on it, a two-layer label on the turnover, on which the product description is duplicated in different languages. Another important difference is the barcode. Any oil shell, regardless of the country and the manufacturer, it begins with 50. And also surrounded on all sides by a white field. In the fake field only from three sides.

Purchase lubricants follow only from official vendors: on the branded gas station "Shell", in supermarkets Kemp, Aga, Auchan, Crossroads, Ribbon, Okay (full list - on the official manufacturer's website), and also know the article.

Video

Shell Helix HX7 10W-40 - Motor Oil Overview

For urban roads, for any cars.

Semi-synthetic engine oil - the best choice Almost for any engine. It effectively supports the purity of the engine, at the same time acts more mildly and carefully than pure synthetics. One of the oldest and famous shell companies in the world is famous for its products of all kinds, using their own unique technologies. Shell Helix HX7 5W40 is one of a row of high-quality semi-synthetic oils.

Canister 4 liters of a new sample (release from 03.10.16)

Description of oil

Motor oil of this brand is created specifically for passenger cars and their engines operating on gasoline, diesel and gas fuel, in the conditions of urban ride. It is possible to use it for motors, "feeding" ethanol mixtures and biodiesel. Gorgeous lubricating and cleansing properties of oil are achieved through the use of both artificial and natural basic ingredients.

By the way, Shell makes a mineral base from natural gas, not petroleum products, thanks to which it turns out a completely unusual, pure product. And the company's own technology is Pureplus and Active Cleansing cleaning additives support the engine in a varical clean state. Perfect purity allow you to achieve purely synthetic oils, and Shell NH7 5W40 is only half. Thanks to this it cleans, maybe not so effectively, but gently and carefully.

Canister 1 and 4 liters of old sample (release until 03.10.16)

Specifications

For Shell Helix HX7 5W40 Specifications are as follows:

IndicatorVerification methodMeaning / Lessonation
1 Kinematic viscosity at a temperature of 100 ° CASTM D445.14.45 CST
2 Kinematic viscosity at a temperature of 40 ° CASTM D445.87.42 CST
3 Density at 15 ° CASTM D4052.843.3 kg / m3
4 Dynamic viscosity at -35 ° C (MRV)ASTM D4684.20,200 SP.
5 Viscosity indexASTM D2270.172
6 Flash temperatureASTM D92.242 ° C.
7 Frozen temperatureASTM D97.-45 ° C.

As you can see from the table, it lubricant It has very high viscosity indicators, and the outbreak and frost indicators allow you to use it in a variety of difficult conditions.

Kanister 1 and 4 liters of old sample and barrel 209 liters (canisters Issue until 03.10.16)

Tolerances and specifications

This product has such specifications:

  • SN / CF API;
  • ACEA A3 / B3, A3 / B4;
  • Jaso SG +.
  • MB 229.3;
  • VW 502.00 / 505.00;
  • GM LL-A / B-025;
  • RENAULT RN0700, RN0710.

In addition, it meets the requirements of Fiat 9.55535-N2 and 9.55535-M2 specifications.

The lubricants of the company Shell earned a good reputation, so that they recommend such dinosaurs of autoinadustrius as BMW and Ferrari.

Old sample canister (left) and new (right)

New canister

Shell oil manufacturer Because 03.10.16 started the release of a new sample canister. Old canisters are still found on store shelves, these are the main differences:

  • corrugated handles on top and side;
  • other neckline;
  • kanister itself got a new form and design;
  • new label;
  • new fake protection system. On the cover of the original canister, a hologram with a 16-digit code or QR code should be pasted, according to which the manufacturer's website can be checked, in your hands the original or fake.

Release form and articles

  1. 550040340 Shell Helix HX7 5W-40 1l
  2. 550046374 Shell Helix HX7 5W-40 1l (New Canister)
  3. 550040341 \u200b\u200bShell Helix HX7 5W-40 4l
  4. 550046366 Shell Helix HX7 5W-40 4l (New Canister)
  5. 550040318 Shell Helix HX7 5W-40 20l
  6. 550040305 Shell Helix HX7 5W-40 55l
  7. 550046509 Shell Helix HX7 5W-40 55l
  8. 550040319 Shell Helix HX7 5W-40 209l

How 5W40 is decrypted

The 5W40 marking means that this is all-season oil, the figure 5 ensures the preservation of the product of all its characteristics at least 30-35 degrees Celsius. And the high temperature index 40 means that it is plus 40 it is quite suitable. So wide range makes Shell HX7 5W40 suitable for almost any climate and any weather.

Advantages and disadvantages

Shell Helix HX7 5W40, due to the combination of mineral, synthetic bases and unique additives has a number of advantages compared to similar products.

  • Higher technical characteristics than in pure mineral or artificial oils.
  • A very wide temperature range that makes the product convenient for use in any climate.
  • Careful, but effective cleansing of the motor from the sludge and maintaining it purity afterwards.
  • Saving viscosity at temperature fluctuations or adverse road conditions.
  • Facilitate the launch of the car in the frost.
  • Prevent corrosion and oxidation of motor parts.
  • Universality for various types of engines and types of fuel used.
  • Extending the life of the entire engine and its individual parts.
  • Small oil consumption and substantial fuel economy.

The statement that this oil does not have flaws, it would be too brave. Of course, they are, as in any other product. But not so much essential. We can say that it does not so much flawlessly cleans the engine as clean synthetics, and a little more spent. However, his consumption is still much smaller than that of mineral oils.

Some motorists stop from the use of shello lubricants their higher price than the analogs from other manufacturers. On this occasion, it can be said that, firstly, semi-synthetic (and in our case there is a speech about it) it is still cheaper than synthetics. Secondly, taking into account the low consumption of oil and saving the fuel, the overpayment is unlikely to be obtained at all. And thirdly, paying this amount, it is guaranteed to get impeccable quality. In pursuit of cheap opportunities you can harm your car such that you will have to fork out for repairs, if not worse. Moreover, a lot of falsification is currently divorced. How to distinguish the shell Helix HX7 5W40 oil from fake, read in our review further.

New fake protection system. Now there is a disruptive sticker on the lid, there is a 16-digit code or QR code under this, by this code, entering it on the official website, you can check, in your hands a fake or original.

How to distinguish fake

There are several rules that will help identify current oil Shell NH7 5W40 and distinguish it from fake when inspection in the store.

  1. On each canister of this product there is an emblem with the inscription PurePlus. This emblem fake fraudsters harder. After all, it covers a special deposition that creates a mirror effect. Due to this, in a small round, you can see your reflection.
  2. The cork canister always fits tightly to the connecting ring, so that they seem to be uniform. And they are not connected by thin "legs", like a fake.
  3. The barcode is certainly surrounded by a white rectangular field from all sides. In the unreal oil, the white part is usually absent from top of the barcode. The numbers on the code always begin with 50.
  4. On the canist itself (not on the label) there is another code in which this liquid is spilled. In addition to what he is, he should also read.

What signs should not be guided? Many, acquiring the product and unpacked it, frighten, not seeing the white protective membrane under the cap. However, this does not mean that in front of you fake. This film can both be and absent from the original.

Focus on the proper printed address of the manufacturer is also not worth it. Fraudsters are far from stupid, so the address they in good faith are printed. Another point: a lot where you can read the information that the Shelnovskaya label is divided into two parts, "a book". And that if part of only one is a fake. However, this is not at all. The presence or absence of a "book" depends on the manufacturer's factory. But, of course, the label should be well glued and clearly pricked, without it.

  • branded gas stations "Shell";
  • large supermarkets (Kemp, Aga, Auchan, Crossroads, Ribbon, Okay, etc.).

© 2021 Bugulma-lada.Ru - Portal for car owners