Automal and all you need to know about motor oils. Motor oil Ford Motor oil for Ford Focus 2 1.8

the main / Engine

IN technical manual For any service modern car Ford says the engine can only work on the synthetics. IN last years Only synthetic engine oil 5W-30 was allowed to apply.

When advanced turbocharged engines appeared, such as EcoBoost, distinguished by low fuel consumption at enormous power, there was a need to develop a new lubricant fluid for them. As a result, an energy-saving alternative was created - Synthetic 5W20.

Properties 5W-20

It differs from analogs with low high temperature viscosity. Benefits include:

  • Easy start;
  • Reduced fuel consumption;
  • Increased wear-resistant elements of the motor system, especially in winter.

However, use synthetic oil 5W-20 is not allowed in each car model. The label should indicate certain values \u200b\u200bof the admission corresponding to the outdated models of Ford - WSS-M2C913-A / B / C.

The newest WSS-M2C948-B specification reflects all the requirements that are presented to the 5W-20 lubricant by Ford. It is applicable only in gasoline installations. The manufacturer's most suitable for the diesel power unit considers the former composition 5W-30. However, it must meet the WSS-M2C913-D conditions.

ACEA A5, B5 lubricant is allowed to pour only in special cases. It possesses several positive qualities: reduces friction force, saves fuel, is characterized by high thermal oxidative resistance. You can use for a long time without replacement. Suitable for working with diesel or high-octane fuel.

Analogs

Castrol Concern for many years together with Ford technologists has been developing new products for power plants Car Ford Focus. Castrol releases a car that Ford advises to pour into their motors. In particular, it is Castrol Magnatec:

  1. A5 5W-30,
  2. E 5W-20 - Professional oil for high-octane fuel.

You can only purchase such joint products in the official center. Popular Ford Formula F synthetics has ceased to be sold only through authorized dealership companies. Now it is implemented in conventional car stores.

Than you can replace 5W-20

Today, many manufacturers produce cars that can fully replace newest oil 5W-20. Their list is quite extensive:

  • Level Moli Special,
  • Motul Specific,
  • Q8 Formula Exclusive,
  • WUNCSH SYNTHOLUBE F1E,
  • Total quartz 9000.

Excellent replacement diesel oil 5W-30 are considered:

  • Shell Helix Ultra PROFFESIONAL,
  • Mobile Super 3000,
  • Q8 Formula Nechno Fe Plus,
  • Kroon-Oil Duranza LSP,
  • Liqui Moly Special.

The most optimal tolerances for the Ford car are:

  • WSS-M2C948-B - for gasoline motors;
  • WSS-M2C913-D - for DVS on the diesel.

The ideal option is considered WSS-M2C913-C. It is allowed in the case of extreme conditions to use oil, the properties of which meet the requirements of the international standard ACEA A5, B5.

100% Synthetic 5W-20 Book with 5W-40 can successfully replace the compositions manufactured by well-known world manufacturers: Shell, Mobil, Total and others.

Selection of lubricants are made taking into account the parameters of the auto motor and its technical characteristics. A poor quality or incorrectly selected machine leads to a set of negative consequences. We invite you to familiarize yourself with the requirements for recommended engine oil for Ford Focus.

Model 2000 release

According to the plant requirements, the Ford Focus Car Manufacturer preferably use Ford's branded lubricants or Motorcraft Formula E, having a viscosity indicator SAE 5W-30. In the absence of original motor lubricants, an alternative is allowed to be poured by autosals, having a viscosity indicator SAE 5W-30, which meet the standards of Ford WSS-M2C913-B.

The selection of viscosity is made according to Scheme 1.

Scheme 1. The dependence of the viscosity of the car on the ambient temperature.

According to Scheme 1, it is recommended to apply liquids having a viscosity indicator SAE 5W-30. For topping you can use motor liquids SAE 5W-30, 5W-40 or 10W-40 corresponding to the type of oil A1 / B1 (preferably) or A3 / B3, depending on the ambient temperature. It is forbidden to apply cars with a viscosity of 10W-40 if the air temperature is less -20 0 C.

  1. ZETEC engines - SE 16V 1.4 l:
  • 3.75 l, if we take into account the oil filter;
  • 3.5 excluding the filtering device.
  1. Motors ZETEC - SE 16V 1.6 L, ZETEC - E 1.8 L, ZETEC - E 2.0 L, DURATEC ST 2,0 L:
  • 4.25 liters, considering the oil filter;
  • 3.75 without oil filter.
  1. DURATEC 8V 1.6 L:
  • 4.2 l with oil filter;
  • 3.7 without a filtering device.
  1. Motors Endura-TDDI / DURATORG TDCI 1.8 l:
  • 5.6 l, taking into account the oil filter;
  • 5.0 liters excluding the filtering unit.

Ford Focus MK2 2004-2011

Model 2006 release.

According to the manual, the manufacturer Ford focus is recommended to use lubricants corresponding to the characteristics:

  • original motor ford oil either Motorcraft Formula E;
  • the viscosity indicator SAE 5W-30.
  • wSS-M2C913-B tolerances.

It is permissible to use alternative lubricating fluidscorresponding to the requirements of WSS-M2C913-B having a viscosity of 5W-30.

Also in the instruction manual of the Auto indicates the following information:

  1. It is forbidden to pour oils having a viscosity indicator SAE 10W-40 if the ambient temperature is below -20 0 C.
  2. In the absence of cars that meet the requirements of WSS-M2C913-B, it is recommended to use the SAE 5W-30 viscosity of the SAE 5W-30 viscosity. If there is no possibility to purchase recommended lubricants, you can pour fluids that have a viscosity of 5W-40 (except machines using FlexFuel fuel) or 10W-40, which according to ASA standards correspond to the class A1 / B1 or A3 / B3 oil. Preferably use A1 / B1.

The volume of lubricant required when replaced is:

  1. Complete set 1.4 L Duratec-16V:
  • 3.8 l with an oily filter even;
  • 3.5 liters excluding the filtering unit.
  1. Complete set 1.6 L Duratec-16V:
  • 4.1 l with even oil filter;
  • 3.75 liters without taking into account the filtering device.

Ford Focus MK3 2011-2017 release

Model 2015 release.

From the instruction manual for auto-recommended engine oil for Ford Focus is determined by the type of engine. For engines working on gasoline, it is recommended to use Ford or Castrol motor oils with a viscosity of 5W-20 that meet the requirements of WSS-M2C948-B. As an alternative lubricant, except Engines 1.0 L ECO Boost (Fox), you can pour the 5W-30 viscosity of the 5W-30 viscosity corresponding to the requirements of WSS-M2C913-C. At the same time, preference is worth paying products. ford companies or Castrol.

In the absence of these lubricants, it is allowed as a top of the use of oils with a viscous indicator 5W-30, corresponding to the ASE ASA class A5 / B5.

The volume of engine oil required when replaced is:

  1. For Motors 1.0 L Eco Boost (FOX):
  • 4.1 liters with oil filter;
  • 4.0 liters excluding the filtering device.
  1. For autodware 1.6 L Duratec-16V-VCT-SIGMA:
  • 4.1 l with oil filter;
  • 3.75 liters without oil filter.

On manual car Ford Focus, for diesel power aggregates Ford or Castrol lubricants are recommended with a viscosity of 5W-30, complying with the requirements of WSS-M2C913-C.

Conclusion

Recommended Motor oil for Ford Focus has a positive effect on the operation of the machine engine, increases the operating period of the lubricant system. Therefore, it is important to choose a lubricant suitable for a certain engine type, given the temperature of the region in which it will be operated vehicle. It is not necessary to use fluids designed for summer at too low temperatures, and lubricants calculated for the winter, pour in heat. Buy all-season oils, it is possible if the ambient temperature difference corresponds to the all-season fluid operating temperatures.

Please note the permanent ride on motor oils recommended for the topping is prohibited. Such exploitation leads to a set of negative consequences:

  • increase the number of harmful impurities in the exhaust gases;
  • reduction of the efficiency of the automotive;
  • increasing the consumption of fuel;
  • reducing the starter resource.

Also consider the basic base of motor oils during lubrication selection. Synthetic and semi-synthetic fluids work with a wider temperature rangethan mineral.

Recommended motor oil for Hyundai Solaris. Recommended motor oil for Toyota Corolla

Dear experts read a lot of similar topics with a question about oil in ...

Auto Ford Focus 2, engine gasoline DURATEC HE 2L, MCPP, Mileage 153000km. I am geographically in the Rostov region, the temperature of the OCD. Wednesdays from -27 in winter to +40 in the shade in the summer. Riding 70% city without special traffic jams, the rest of the track with a different style of driving from calm to aggressive, but the engine turnover never raise above 4500-5000 boom / min under overtaking.

Luya always 95th gasoline on TNK and Rosneft. I change the oil through 10000km. I'm the 3rd owner of the car, the previous owner of Lil Castrol 5W30, the periodicity of the replacement was exactly at least 15000km. On the recommendation of the manual pouring 5w30, and is also allowed 5W40 or 10W40, but the fuel consumption and emissions will be increased. Recently, the dealer is filled with catastrophe 5W20.

Dear experts read a lot of similar topics with the question about the oil in the same car, but why did you decide to open a new topic. After buying a car (the mileage was 120,000) I was the cast of 5W30. Changed the oil through 10kkm. Curved forums about his tendency to Nagara formation, changed the brand of oil and began to follow Zhor, because this disease of the DURATEC family engines, but only with a volume of 1.8 and 2l.

Oil consumption at 1000km was about 200-220. Then, stumbled upon the network for the statement that an unofficial recommendation for the dealership service of oil with an index 5W40 instead of 5W30 in engines with a mileage with a mileage of more than 120km was supposed to be published from FMK. Outcasting the oil-free wheels with each oil change. Oil consumption fell to 170g / 1000km. Then due to the lack of at reasonable prices 1l the canister of this oil on the plot (they do not like our stores Lukoil
To take on the implementation, and refueling LUKOIL, by the way, too), had to change to a more affordable Mobil 5W40. Further, I read that the DURATEC engine has a very narrow tubing of the lubricant system and only 5W30 or 5W20 oil is suitable for it.

I understand that Mascinal is not good (the first sign of the overhaul) Motorists advise pouring 5W40 to reduce the wholesale, but I began to wake, but it is better to add oil to me just more often, and not having an oil starvation if it is present. In addition to the massembly of other problems in the engine, did not observe, it was normal in frosts. Watched here in fak for novice video about cold launch And about the runoff different species Oils - alerted. I compiled a comparative plate with the characteristics of oils Castrol with various indices, but decided to ask people, the dog here was eating:
1.

Is the statement about the use of more dense oils in engines with a mileage of more than 150kkm? 2. If we compare the oils of one manufacturer, the oil with which index is better pouring for operation in winter and summer in my region and with the condition of the wear resistance of the engine parts? I mean: 0W20; 0W30; 0W40; 5W20; 5w30; 5W40. 3. Does it make sense to go to 0W2040? four.

What is the advantage of 5W20 in comparison with 5W30? Judging by the table data, in 5W20 below kinematic viscosity at 40 and 100`s, as well as dynamic at -30`c. At 150`C, the castrol does not give data. 5. Advise some good anti-wear oils, taking into account the above issues. Sorry for many letters and do not kick much about stupid questions, but I wanted to write more in more detail, so that you understand my Logic torment to the oils of different viscosity. Thank you in advance for understandable answers.

Motor oil for Ford Focus 2

Using the right lubricants can extend the engine life and save thousands of blood money on repair. Nevertheless, many motorists do not know which oil is needed for his car. After reading the post about the best motor oil of 2016, I decided to write about the oil for Ford Focus 2.

What oil pouring Ford Focus 2

Unambiguous answer is impossible. Now this number of oils is that even sellers are lost in their assortment. The most important criterion for choosing an oil This should be 100% synthetics and the point here is not that this option is poured at the factory, but in its optimal viscosity and the necessary additives. I will not write about the benefits of synthetics, and immediately go to the answer to the question best oil For Ford Focus 2.

Ford Focus Oil 2

1. Mobil 1 Advanced Fuel Economy

This oil is specially created for those who want to improve the fuel economy of the gasoline engine. It has an unusually low viscosity and a unique combination of additives that give this synthetic oil great advantages compared to other manufacturers. You will feel particular pleasure at low temperatures, and super low viscosity increases the efficiency of the engine and improves fuel efficiency. According to real-world reviews, potential benefits ranged from 0.2 to 2.3% of fuel economy after transition to this oil, and its excellent thermal and oxidative stability helps reduce the aging of the oil.

Good bonus for people who forget to change it.

Available in 0W-20 or 0W-30.

2. Castrol GTX Magnatec

This oil exists for quite a long time and it has special molecules that protect the engine during startup. It will be good choice For those who drive a lot or use the start / stop function.

Available in 0W-20, 5W-20, 5W-30, 10W-30.

3. Valvoline Full Synthetic with Maxlife technologies

This oil is specifically designed for engines with mileage of more than 150,000 km and it has a special additive that helps prevent Jort oil. Antioxidants and the mixture is added to it. Improved leaching and preventing precipitation.

Valvoline Full Synthetic with Maxlife technologies has an additional "relaxed" anti-wear additive that helps prevent premature wear Engine, so it is very desirable to pour like oil immediately after 150 thousand. km.

Available in 0W-20, 5W-20, 5W-30 and 10W-30.

4. Pennzoil Platinum

With this synthetic oil you can participate in the warranty program from the manufacturer. This program covers 15 engine nodes, lasts 15 years or mileage of 800,000 km. If you use this oil and have all checks and records with a hundred, then you get under the insurance of Penniz.

This product is designed to keep the engine pistons up to 65% cleaner than the standards adopted. Customer feedback says that thanks to this synthetic mold, they drove 1000 km more than usual.

Available in 0W-20, 0W-40, 5W-20, 5W-30 and 10W-30.

5. Motul 8100 X-Clean

The last representative in this list will delight dieselists. This is 100% synthetic engine oil compatible with summary filtersSo it can be used in any car that is powered by a turbo diesel engine. It is specifically designed for vehicles with three-component catalytic neutralizers and will help save engines, protecting the environment.

This synthetic oil is suitable gasoline engines and complies with EURO IV and EURO V standards.

Available in 5W-30 and 5W-40.

Owners Popular car Ford. Focus is often asked about suitable oil In the engine of his car. This question today is very relevant, given the fact that in Russia there are a lot of focus support. If the oil replacement process itself is carried out without much effort and professional skills, the choice of lubricant requires theoretical knowledge. In this article, consider what parameters you need to pay attention when choosing a suitable motor lubricant On the example of Ford Focus of the first generation.

The engine is the most complicated and important technical unit in the car. It requires timely service, but expensive repair is often available not to everyone, especially owners of supported "focus", which are not entitled to warranty service. Naturally, it will be much easier to entrust the choice and replacement of oil by a specialist of the dealership center, but such a service will be in a round sum. But the replacement supplies - Not the most time-consuming procedure, and it can be performed on your own.
Oil must be changed according to the regulations. In addition, it is possible to understand the need for replacement by oil. So, to check the color and smell of oil, it is required to make a control measurement using a measuring probe. If the liquid is painted in a dark brown tint, has the smell of burned and contains a metal chips, in this case, without replacing the oil can not do.

Oil functions

  1. Lubrication of internal components of the engine, preventing their overheating
  2. Effective cooling details
  3. Reducing fuel consumption
  4. Increase the torque and elasticity of the engine
  5. Motor can work at full power

Oil parameters

To date, there are certain norms, tolerance levels and temperature viscosity standards for which a suitable product can be selected. For each car brand, these parameters may vary, so it is very important to pay attention to the instruction manual.

In addition, not less important parameter - Oil type. So, in this case, the lubricant is synthetic, mineral and semi-synthetic. The first option is the most suitable for Ford Focus.

  1. Synthetic - the most liquid and fluid oil that is not afraid of low temperatures. It can be used to operate in summer and winter conditions.
  2. The semi-synthetic is a compromise option for those who have insufficient funds for clean synthetics. Such oil is better to pour into engines of old cars. This is the most thick oil presented on the market today. It is not recommended to use for low temperatures, as it freezes very quickly because of its density. But with such an oil, the owners will never complain about oil leaks.
  3. Mineral - the complete opposite of synthetic oil. Like mineral water, it is better to use it for old cars, which have a high risk of oil leaks.

So, for Ford Focus 1, it is preferable to pour synthetic oil. In extreme cases, use semi-synthetic, but only for large runs.
Also, engine oil is distinguished by seasonality - all-season, summer and winter. Each of them has certain viscosity parameters, admission and quality classes.

Factory Oil for Ford Focus 1

Factory oil for engine Ford. Focus - Ford Formula F. It's high-quality and original productwhich is replaced solely according to the regulations, which is about 20 thousand kilometers. If necessary, the regulations can be reduced to 10 thousand if the machine is operated in complex climatic conditions (which is relevant for domestic conditions).

  • Castrol is one of the best European engine oils. It is recommended French car manufacturers. As "Castrol" doubt not to have to - this lubricant meets all international requirements, and its beneficial features have a long validity period that favorably affects the replacement periodicity. A high-quality Castrol product plan is explained by the fact that the manufacturer constantly controls production, and at the same time improves its products - makes it more environmentally friendly and efficiently. Relatively recently, an EDGE oil appeared on the market, which is a kind of main product.
  • Mobil 1 - product with more than 10 years of history. This firm has a good reputation, and is recognized worldwide. This lubricant is one of the leaders in the market. Mobil oil Contains various additives affecting the efficiency of the motor. With such an oil, the car can be subjected to colossal loads - for example, it is fast enough to ride, and at the same time not to be afraid for engine overload. There are many Mobil 1 options, and the most optimal of them can be considered Mobil 1 Rally Formula 5W-40. It can be recommended by drivers with aggressive driving manner.
  • Shell's company - another leader in the market lubricants. Products of this company are resistant to low temperatures, and is suitable even for the most tall frosts.

Output

The brand is not the most important indicator when choosing an oil. So, in this case, first of all it is necessary to study oil parameters - viscosity, admission, quality class, etc., and then select one or another brand. But if the buyer is dealing only with recognized firms (such as Mobil, Castrol, etc.), then in their quality should not be doubted, and you can safely make a choice in favor of them.

© 2021 Bugulma-lada.Ru - Portal for car owners