Recommended engine oil for Ford Focus. Car oils and everything you need to know about Ford focus 2 engine oils restyling which oil to pour

Engine oil for Ford Focus 2

Using the correct lubricants can extend the life of the engine and save thousands of hard-earned money on repairs. However, many motorists don't know what kind of oil they need for their car. After reading the post about the best engine oil of 2016, I decided to write about the oil for Ford Focus 2.

What oil to pour Ford Focus 2

It is impossible to find a definite answer. Now there are so many oils that even sellers are lost in their assortment. The most important criterion for choosing an oil should be 100% synthetic, and the point here is not that this option is poured at the factory, but in its optimal viscosity and the necessary additives. I will not write now about the advantages of synthetics, but I will immediately move on to answering the question of the best oil for Ford Focus 2.

Oil for Ford Focus 2

1. Mobil 1 Advanced Fuel Economy

This oil is specially formulated for those looking to improve the fuel economy of their gasoline engine. It has an unusually low viscosity and a unique combination of additives that give this synthetic oil great advantages over other manufacturers. You will feel special pleasure when low temperatures and the super low viscosity improves engine efficiency and improves fuel economy. According to real people, the potential benefits were from 0.2 to 2.3% in fuel economy after switching to this oil, and its excellent thermal and oxidative stability helps to reduce oil aging.

Nice bonus for people who forget to change it.

Available in 0W-20 or 0W-30.

2. Castrol GTX Magnatec

This oil has been around for quite some time and has special molecules that protect the engine during starting. This will good choice for those who drive a lot or use the start / stop function.

Available in 0W-20, 5W-20, 5W-30, 10W-30.

3. Valvoline Full Synthetic with MaxLife Technologies

This oil is specially formulated for engines with a mileage of more than 150,000 km and has a special additive that helps to prevent oil grease. It has added antioxidants and a blend to improve leaching and prevent precipitation.

Valvoline Full Synthetic with MaxLife Technologies has an additional "ashless" antiwear additive to help prevent premature wear engine, so it is very desirable to pour such oil immediately after 150 thousand. km.

Available in 0W-20, 5W-20, 5W-30 and 10W-30.

4. Pennzoil Platinum

With this synthetic oil you can take part in the manufacturer's warranty program. This program covers 15 engine nodes and lasts 15 years or 800,000 km. If you use this oil and have all receipts and records from the workshop, then you are covered by Pennzoil.

This product is designed to keep engine pistons up to 65% cleaner than accepted standards. Customer reviews say that thanks to this synthetic monster, they drove 1000 km more than usual.

Available in 0W-20, 0W-40, 5W-20, 5W-30 and 10W-30.

5. Motul 8100 X-CLEAN

The last representative on this list will delight diesel operators. This 100% synthetic motor oil is compatible with particulate filters so that it can be used in any vehicle that is powered by a turbo diesel engine. It is specially formulated for vehicles with 3-way catalytic converters to help preserve engines while protecting the environment.

it synthetic oil fits gasoline engines and complies with EURO IV and EURO V.

Available in 5W-30 and 5W-40.

Dear experts I read many similar topics with a question about oil in ...

Auto Ford Focus 2, gasoline engine Duratec HE 2l, manual transmission, mileage 153000km. Geographically I am in the Rostov region, ambient temperature. Wednesdays from -27 in winter to +40 in the shade in summer. Riding 70% of the city without any special traffic jams, the rest of the track with a different style of driving from calm to aggressive, but I never raise the engine speed above 4500-5000 rpm when overtaking.

I always pour 95th gasoline at TNK and Rosneft. I change the oil after 10000 km. I am the third owner of the car, the previous owner lil Castrol 5W30, the replacement frequency he had exactly at least 15000 km. On the recommendation of the manual, pour 5W30, and 5W40 or 10W40 is also allowed, but this will increase fuel consumption and emissions. Recently, the dealer has been pouring Castrol 5W20 at TO.

Dear experts I read a lot of similar topics with a question about oil in the same car, but that's why I decided to open a new topic. After buying a car (mileage was 120,000) I poured Castrol 5W30. I changed the oil after 10 km. I read the forums about its tendency to carbon formation, changed the brand of oil and began to monitor the zhor, since this is a disease of engines of the Duratec family, but only with a volume of 1.8 and 2 liters.

Oil consumption per 1000 km was about 200-220g. Then, stumbling across the network on a statement that FMK allegedly published an unofficial recommendation for dealer service stations to fill oil with an index of 5W40 instead of 5W30 in engines with a mileage of more than 120 km, filled himself with Lukoil Lux Sint API SN / CF 5W40, and produced decarbonization of oil scraper wheels at each oil change. Oil consumption dropped to 170g / 1000km. Then, due to the lack of 1 liter of canisters of this oil for refilling at reasonable prices (we do not like Lukoil stores
take for sale, and refueling Lukoil by the way too), had to be changed to the more affordable Mobil 5W40. Further, I subtracted that the Duratec engine has very narrow channels of the lubrication system and only 5W30 or 5W20 oil is suitable for it.

I understand that this is not good for oil (the first sign of overhaul), the minders advise pouring 5W40 to reduce the oil, but I began to ogle, for me it’s better to add oil a little more often, and not have oil starvation of the engine, if this is present. In addition to the oil lubricator, I did not observe any other problems in the engine, it started up normally in cold weather. Watched here in FAK for beginners video about cold start and about dripping different types oils - alarmed. I made for myself a comparative plate with the characteristics of Castrol oils with various indices, but I decided to ask the people who ate the dog here:
1.

Is the statement about the use of thicker oils in engines with a mileage of more than 150 km long true? 2. If we compare oils from the same manufacturer, what index is better for pouring for winter and summer operation in my region and with the condition of observing the wear resistance of engine parts? I mean: 0W20; 0W30; 0W40; 5W20; 5W30; 5W40. 3. Does it make sense for me to upgrade to 0W2040? 4.

What is the advantage of 5W20 over 5W30? Judging by the tabular data, 5W20 has lower kinematic viscosities at 40 and 100`C, as well as dynamic at -30`C. At 150`C Castrol does not provide data. 5. Advise on a few good antiwear oils based on the above questions. Forgive me for a lot of letters and don't kick too much about stupid questions, but I wanted to write in more detail so that you understand my logic of tormenting oils different viscosity... Thanks in advance for the clear answers

The selection of the lubricant is made taking into account the parameters of the car engine and its technical characteristics... Poor quality or incorrectly selected car oil leads to many negative consequences. We suggest that you familiarize yourself with the requirements for the recommended engine oil for Ford Focus.

2000 model year

According to the requirements of the Ford Focus car manufacturer, it is preferable to use branded Ford or Motorcraft Formula E greases with a viscosity index of SAE 5W-30. In the absence of original motor lubricants alternatively, it is allowed to fill in motor oils with a viscosity index of SAE 5W-30 that meet Ford WSS-M2C913-B standards.

The selection of the viscosity is carried out according to scheme 1.

According to scheme 1, it is recommended to use fluids with a viscosity index SAE 5W-30. For topping up, you can use motor fluids SAE 5W-30, 5W-40 or 10W-40 corresponding to the oil type A1 / B1 (preferred) or A3 / B3, depending on the ambient temperature. It is forbidden to use motor oils with a viscosity of 10W-40 if the air temperature is less than -20 0 С.

1. Zetec engines - SE 16V 1.4 l:

• 3.75 l, if you take into account the oil filter;
• 3.5 excluding filtering device.

1. Motors Zetec - SE 16V 1.6 L, Zetec - E 1.8 L, Zetec - E 2.0 L, Duratec ST 2.0 L:

• 4.25 liters, if you take into account the oil filter;
• 3.75 without oil filter.

1. Engines Duratec 8V 1.6 l:

• 4.2 l with oil filter;
• 3.7 without filter device.

1. 1.8L Endura-TDDi / DuraTorg TDCi Motors:

• 5.6 liters including the oil filter;
• 5.0 l excluding filter unit.

Ford Focus Mk2 2004-2011 years of release

According to the manual by the manufacturer Ford Focus, it is recommended to use lubricants that meet the characteristics:

• original Ford or Motorcraft Formula E engine oil;
• viscosity index SAE 5W-30.
• tolerances WSS-M2C913-B.

It is acceptable to use alternative lubricants meeting the requirements of WSS-M2C913-B, having a viscosity of 5W-30.

Also, the following information is indicated in the car operating instructions:

1. It is forbidden to fill in oils with a viscosity index SAE 10W-40, if the ambient temperature is below -20 0 С.
2. In the absence of motor oils that meet the requirements of WSS-M2C913-B, it is recommended to use motor oils with SAE 5W-30 viscosity. If it is not possible to purchase the recommended lubricants, you can fill in fluids with a viscosity of 5W-40 (except for machines using Flexfuel) or 10W-40, which, according to ACEA standards, correspond to the A1 / B1 or A3 / B3 oil class. A1 / B1 is preferred.

The amount of lubricant required when replacing is:

1. 1.4 L Duratec-16V complete set:

• 3.8 liters with a couple of oil filter;
• 3.5 liters excluding the filter unit.

1. 1.6 L Duratec-16V complete set:

• 4.1 l with a couple of oil filter;
• 3.75 liters excluding the filtering device.

Ford Focus Mk3 2011-2017 years of release

From the operating instructions for the car, the recommended engine oil for Ford Focus is determined by the type of engine. For gasoline engines, it is recommended to use Ford or Castrol 5W-20 engine oils that meet the requirements of WSS-M2C948-B. As alternative lubricants, in addition to 1.0 L Eco Boost (Fox) engines, you can pour motor oils with a viscosity of 5W-30 that meet the requirements of WSS-M2C913-С. In this case, preference should be given to products Ford companies or Castrol.

In the absence of these lubricants, it is allowed to use oils with a viscosity index of 5W-30, corresponding to the ACEA class A5 / B5, as a topping-up.

The amount of engine oil required when changing is:

1. For engines 1.0 L Eco Boost (Fox):

• 4.1 l including oil filter;
• 4.0 l excluding filtering device.

1. For auto engines 1.6 L Duratec-16V-VCT-Sigma:

• 4.1 l with oil filter;
• 3.75 L without oil filter.

According to the manual auto Ford Focus, for diesel power units it is recommended to pour Ford or Castrol lubricants with a viscosity of 5W-30 that meet the requirements of WSS-M2C913-С.

Conclusion

Recommended engine oil for Ford Focus has a positive effect on the operation of the engine of the car, increases the operating period of the lubrication system. Therefore, it is important to select a lubricant suitable for a particular type of engine, taking into account the temperature of the region in which it will be operated. vehicle... You should not use fluids developed for the summer at too low temperatures, and lubricants designed for the winter should be poured in the heat. Buy multigrade oils, it is possible if the difference in ambient temperatures corresponds to the operating temperatures of an all-season liquid.

Please note that continuous driving with engine oils recommended for topping up is prohibited. Such exploitation leads to many negative consequences:

• an increase in the amount of harmful impurities in exhaust gases;
• decrease in the efficiency of the car engine;
• increased fuel consumption;
• reduction of the starter resource.

Also consider the base base of the engine oil when selecting the lubricant. Synthetic and semi-synthetic fluids work with a wider temperature range than mineral.

Recommended engine oil for Hyundai solaris Recommended engine oil for Toyota Corolla

Ford Focus second generations is a very popular car on Russian market... The car was in demand all over the world - this was facilitated by the optimal level of comfort and control, as well as high quality workmanship, long service intervals and low maintenance. But like any other mechanism, even quality car it is necessary to timely service, carry out maintenance in accordance with the regulations, etc. For example, pour oil into the engine. This is one of the simplest and, at the same time, important procedures positively affecting the service life of the motor. Let's take a closer look at what you need to pay attention to when choosing an oil for a Ford Focus 2.

As you know, engine oil in Russia is considered one of the most demanded consumables for the car in question. Naturally, the oil needs to be changed regularly to keep the engine running smoothly. If you do not follow the elementary rules specified in the instructions, you can face irreversible consequences, up to overhaul ICE. Let's try to figure out which are the most important parameters oils should be taken into account.

Factory oil

An interesting fact is that the Ford Focus 2 rolled off the assembly line with high quality oil Ford Formula F. It must not be drained or changed before the first service. The fact is that the factory oil has special additives necessary for the running-in of the engine components during the running-in period. This means that you should wait for the onset of the first routine maintenance, and only then change the oil to the factory one, or to another. Naturally, the first oil change is best done at a Ford dealership. When self service you must adhere to the manufacturer's recommendations.

What does engine oil affect?

Genuine engine oil has a positive effect on:

• Motor resource
• Reduced fuel consumption
• Dynamics
• Catalyst reliability

Based on this, we can conclude that it is possible to reveal all the advantages of the Ford Focus 2 engine only when using high-quality oil. The option with additives will not be superfluous, which will further reveal the potential of the power component of the car.

Types of oils and their differences

Engine oils differ in viscosity grade (SAE) and operational properties(ACEA)

Marking and approval

Make no mistake when choosing suitable oil will help markings and tolerances established by the American concern Ford. These parameters are indicated on the product label. If they correspond to the figures indicated in the operating instructions, then the oil is suitable.

Oil change intervals

The "circulatory" system of the car is replaced once a year or every 20 thousand kilometers. Let's say the car has driven 20 thousand km after three months - then it's time to change the oil. Or vice versa, when in one year Ford operation Focus 2 has driven only 5,000 km - in this case it is also time to change the oil.

Advice: experienced motorists who often operate a car in urban conditions, it is recommended to fill in oil every 10 thousand km.

Oil classes:

• Mineral
• Synthetic
• Semi-synthetic

In this case, you can advise synthetics or semisynthetics, but the exact answer will be given by the manufacturer

Types of oils:

• Winter
• Summer
• All-season

Please note that the packaging of the winter version must have the letter W, which is usually preceded by a certain number. As for the all-season and summer option, they are indicated by numbers.

Oil selection

Today the market car oils quite wide and varied. Therefore, it is impossible to give an unambiguous answer, which brand will be the most preferable oil for the Ford Focus 2. It is much more important to first pay attention to the parameters, and then consider the brands.

As written above, the best option there will be a fully synthetic oil - if only because the Ford Focus 2 receives such a lubricant at the factory. Synthetics have excellent lubricating properties and optimal viscosity. Alternatively, you can recommend synthetics with additives - for even greater effect.

Pros of winter oil

1. Reliable operation and fast engine start in low temperature conditions
2. Winter oil stays liquid even in cold weather, while starter and battery are less stressed
3. Synthetics have a high fluidity, and due to this, they quickly spread throughout all engine components. This avoids "dry" engine friction
4. Thanks to this oil, the engine warms up faster, and due to this, you can start moving almost immediately
5. Synthetics prevent overheating of the motor even in hot weather, as the engine warms up only up to working temperature- no more and no less

The best oil manufacturers

Ford has approved a large number of oil manufacturers for the Focus 3, which are certified. Consider the most popular brands in terms of value for money.

Castrol

The oil of this company is in wide demand by almost all European motorists. For example, automakers from France only produce their cars with Castrol oil... These are innovative products, to the quality of which there can be no claims. In addition, the manufacturer is constantly improving its oil, and thereby raises its credibility. Among the novelties of Castrol, we note the new EDGE oil - it is optimal in price and quality, and is ideally compatible with Ford engine Focus 2.

Mobil 1

A pioneering product that all Ford Focus 2 owners endorse. Mobil 1 raised the quality bar a decade ago and was second to none on the market. The advantage of Mobil 1 is that it contains a large number of additives that have a positive effect on the character and reliability of the vehicle, especially when driving on the highway at high speeds. Unfortunately, there are many Mobil counterfeits 1, so you need to be careful. The best Mobil oil 1 is considered a variant of Mobil 1 Rally Formula 5W-40, which is well optimized for the Ford Focus 2. Naturally, this oil is not cheap, but it is among the best oils by quality.

Shell

A worthy alternative to Mobil 1. Shell oil is cheaper than its closest competitor, and at the same time is excellent for Ford Focus 2. This oil provides quick engine start even in severe cold. So no wonder why dealerships it is recommended to fill in Shell.

Video

Along with the products of AvtoVAZ and Hyundai, Ford model Focus in our country is cult. The number of owners is growing steadily, and these are not only buyers of new versions, but also participants in the "secondary" market.

Before buying a used car, the potential owner collects certain information:

• features of operation;
• disadvantages, advantages over classmates;
• the procedure for passing and the cost of routine maintenance;
• what parts are used and expendable materials.

Let's take a closer look at the last point. Today we'll talk about which oil is best for Ford Focus 2, especially after the end of the warranty period.

The main problem for used cars is that the owner often does not follow routine procedures and tries to save on consumables. This leads to accelerated wear engine, or its breakdown.

What is poured into a Ford Focus 2 at the factory?

It's not a secret for anyone that refining of petroleum products is not organized at automobile plants. All liquid consumables are ordered from other manufacturers and delivered to the conveyor with the car factory logo on the packaging.

For Ford Europe Motor company, the oil is produced by the French company Elf. Of course, the Ford logo flaunts on the cans and barrels, and the consumables belong to the automaker's brand.

The oil for Ford Focus, as well as for many other models with similar engines, is called Ford Formula F 5W-30.

It comes to the plant in 200 liter barrels, and dealer service stations can use 5L and 1L packages.

What is the best oil for the Ford Focus 2 engine

If you bought new car in a car dealership, it will contain original oil... Moreover, during the entire warranty line, you will not be tormented by the question of which consumables to change during the scheduled maintenance (unless, of course, you are going to violate the terms of the guarantee).

All work is carried out by the dealership, Ford engine oil is poured in accordance with the instructions for the regulations.


Lubricants meet all parameters and quality standards:

This is quite high quality semisynthetics, which have been tested for decades. With the advent of each subsequent manufacturer's tolerance, the composition of the additives changes slightly (of course, for the better), but the basic base remains the same.

For American owners (this model is also available for the overseas market), products are offered by the court supplier of spare parts for Ford - Motorcraft.

There is an opinion of a number of experts and experienced motorists that synthetic oil is by default better than semi-synthetics, and even more so mineral water. Especially a lot of such advice applies to engines with solid mileage. It makes no sense to argue on this topic.

The surest recommendation is to follow the manufacturer's instructions. In the regulations for a mileage of 20,000 and 200,000 km, the same oil is indicated: semi-synthetics 5W30. There are no scientifically proven facts of the miraculous transformation of the old motor into a new one (when switching to full synthetic).

The use of one or another basis (within the framework of the factory approval) is everyone's personal business. It will not be worse for sure, it is also pointless to wait for improvements in the operation of the motor.

How much oil should be poured into Ford Focus 2, and how much “topping up” reserve should be left until the next MOT? There is no definite volume for the Ford Focus 2. More precisely, there are many options, depending on the type of engine.

The spread is quite large, if you buy standard packages - there will always be a certain margin. You should be aware that during a normal replacement (without vacuum pump) there is always some lubricant left in the motor.

Therefore, a stock of 200-500 ml is provided in any case. In normal operation, and a serviceable engine, this volume should be enough "topping up" between maintenance.

Important: If you buy oil in North American packaging (in this case, it is Motorcraft), the volume will be slightly less.

The unit of measure for volume in the United States is quart. 1 quart equals 946 ml, so when ordering 5 liters American butter, you get the European 4.73 liters. By the way, the amount of oil in engines manufactured in the USA (for the USA) is tied precisely to the whole number quart.

In any case, this amount is only poured into a "dry" engine. With the current replacement, the stock still remains.

Analogues of "branded" oil for Ford Focus 2

There is no strict binding to the manufacturer. The main thing is that the label contains Ford approval WSS-M2C913 and SAE viscosity in accordance with maintenance instructions.

Engine oil for Ford Focus 2 is not unique in composition, all leading manufacturers offer a replacement: both more expensive and cheaper.

If you are a fan of pure synthetics, you can pour Castrol Edge 5W-30 Fully Synthetic or Castrol Magnatec 5w-30. For more economical owners, Motul 5W-30 913C or Lukoil Armortech Genesis 5W-30 are offered.

Often used Petro canada Supreme Syntetic 5W30 is a solid semi-synthetic from the USA. Moreover, when pouring any analogue, complete flushing is not required. It is enough to shorten the first interval after the brand change, to 3000 km.

Ford oils are often counterfeited

Most often, you can find a fake exactly branded oil for Ford Focus 2. It is not difficult to identify counterfeit, here are the signs of the original:

What is the difference fake oil from the original - video

Conclusions:
It is much easier to buy oil for Ford Focus 2 than for many other foreign cars. With all the richness of choice, there is no point in chasing advertising promises. It is better to fill the Ford Focus engine with branded oil.

And in order not to fall for counterfeit, consumables must be bought in stores where you can be provided with accompanying documents for the goods.