What oil to fill in the Mitsubishi engine Lancer 9. Defining the conditions for choosing an oil liquid

For each vehicle With engine internal combustion After a certain distance or the time interval comes the moment of replacement oil filter And oil in the engine. Sooner or later, every responsible owner of the Ninth Lancer is asked by a number of questions: what is the interval of the engine oil replacement, in what quantity and how to fill lubricant? Modern market Offer big choice Motor oils. They all differ technical characteristics - a set of additives, viscosity, chemical composition (mineral, synthetic, semi-synthetic) and, most importantly, quality. Replace oil in the motor Mitsubishi Lancer. 9 is quite simple, however, there are a number of nuances that should be known to each owner of this car model. About this further in the article.

Mitsubishi Lancer 9 motor can be poured actually any oil. famous brandswhich is suitable for those climatic conditions in which the vehicle is planned. For our climate, as a rule, the lubricant is suitable for a viscosity of 5W30-5W40. Choose only original synthetic oilsIn order to avoid problems with the power unit.

For the car under consideration, there are enough about three or four liters of oil, which directly depends on the volume of the engine. In addition, it is necessary to take into account the fact that some of the lubricant will be filled into the oil filter.

The total volume of lubricant in the engine, given the volume of the oil filter, is: 2.0 - 4.3 liters, 1.3-1.6 - 3.3 liters. In addition, it should be remembered that in any case it will not be able to merge the oil completely - about 300 grams will continue in the system.

Lancer 9 oil into the engine, as often needed to change, recommendations

According to the factory instruction, the replacement of lubricant should be made every 15,000 mileage mileage or when maintenance. In our conditions, which relate to extreme (country smart roads or city ridden), oil replacement should be carried out at least 2 times more often, that is, every 7.5 thousand km of run. Looking through the instructions for the transport facility, be sure to find the section where the oil consumption is said for your type of motor.

Tools, fixtures, consumables

So, to replace the oil in the Mitsubishi Lancer 9 motor you will need:
1. Auto lift, overpass or pit.


2. New motor oil 3-4 liters;
3. New filter element;
4. Key to "17";
5. The key to "13";
6. Capacity for drain;
7. Ribs;
8. Special key to dismantle an old filter;


9. Oil;
10. Oil filter.


11. Laying drain plug.


12. Gloves and protective clothing.

Replacing the oil in the engine, step by step instructions

1. First of all, you need to run the motor and warm it up to the operating temperature.


2. Drive the car on the lift or the observation pit. After that, muffle the motor.
3. Open the plug-in cover.


4. Next, you need to go down and substitute the container under the drainage of waste fluid. Unscrew drain plug The key to "17" (for safety is better than a ratchet with the extension - the oil is hotter).

You can wind the wiring bolt, in order to avoid falling the bolt into the tank for the drain and enter the lubricant on the hands.

5. Unscrew the oil filter with a special puller or hands (if it does not work, run the oil filter with a flat screwdriver and use it as a lever to unscrew the filter).

6. While oil flows, replace the laying on the drain plug on the new one.

7. When oil stalks, put a drain plug in place.

8. Remove the new oil filter and pour 2/3 oil into it, after that smear Sealing ring and tighten the filter.

9. Take the oil and fill in the neck of the engine. Property Control the oil level - it should be in the center between the MIN and MAX marks. Now you can twist the lid of the neck.

Check if there are leaks from the filter and plugs. Get the car, let it work 5-10 minutes.

10. For engine 1.6 / 1.3, it will take 3.3 liters of oil (including an oil filter), and for the engine 2.0, a 4.3 liter oil (including oil filter).

Experienced car owners advise the following motor oil for Mitsubishi Lancer 9:

1. Liqui Moly.
   
   
2. Motul (for example, Motul X-Cess 8100 5W-40).
   
3. LUKOIL.
   
   
4. Shell (for example, Helix Ultra 5W40).
   
   
5. Mobil.
   
   
6. Also advised Castrol 10W60 Sport.

Some motorists prefer to apply those motor oils that are recommended by the manufacturer, namely Mobile 1 5W50, 5W40, 0W40.

It is worth noting that the Mitsubishi Lancer 9 vehicle manual indicates that the following types of oils can be used depending on the season (winter-summer) - SAE 0W30, 0W40, 5W30, 5W40. After a run of 65 thousand kilometers, the officials recommend changing the lubricant on the oil with a viscosity of 5W50. The golden middle is 5W-40.5W-30 oil. It is worth noting that many pour mobiles, but it is often faked. Also good Motul or Esso Ultron.

It is important to understand that in principle the brand depends a little, so it is more necessary to focus on the viscosity of the oil for the season and by the state of the engine. In the motors with mileage for a hundred thousand km, it is not recommended to pour modern oils Type 0W30 or 5W30. In the "engines" with mileage is considered optimal option Fill the oil with a viscosity of 0W40, 5W40 and 5W50 (it will burn less, however, it will be dark faster, as a result of which the lubricant will have to change more often, but the engine will work much better).

From compliance with the deadlines for replacement and following recommendations for right choice motor lubricant The reliability of the power plant and its durability depends.

Oil provides protection of rubbing surfaces from excessive wear, provides heat transfer, reduces shock loads. Therefore, the car owner must accommodate the selection of lubrication and observe the intervals maintenance.

ATTENTION! Found a completely simple way to reduce fuel consumption! Do not believe? Auto mechanic with 15 years old also did not believe, until he tried. And now it saves 35,000 rubles per year in gasoline!

Official dealers Recommend to pour into the engine Mitsubishi Lancer 9 brand mitsubishi oil Motors. Its cost is more than 3000 rubles. This grease Fully the same with ENEOS Grand Touring, the price of which is just over 2,000 rubles.

Corporate oil Mitsubishi Motors.

Therefore, many car owners prefer to acquire ENEOS. It should be paid to the manufacturer. Well-proven grease JX Nippon Oil & Energy. ENEOS oil is released and domestic producer - IP Tungusov. This lubricant, according to the reviews of the car owners, shows itself much worse in Mitsubishi Lancer engines 9, so it is not recommended for the acquisition.

When choosing an oil, attention should be paid to the brand. The table below shows lubricants that have proven themselves well in Mitsubishi Lancer 9 power plants according to the reviews of the car owners.

When choosing an oil into the Mitsubishi engine Lancer 9, it is necessary to focus on the required viscosity according to the SAE classification. The most suitable lubricant options are shown in the diagram below.

It should be borne in mind that there should be more viscous oil on worn engines. Otherwise, the owner will face the flow of pads and glands, as well as a large lubricant fug.

The final stage when choosing an oil is to check its compliance with ASA and API standards. According to ASA, lubricant should belong to one of the classes: Al, A2, A3. According to the classification of PO API Oil For Mitsubishi Lancer 9 should relate to the SG class or higher.

When taking oil, it is necessary to take into account that it is forbidden to fill the lubricant intended for use in the checkpoint. Even the short work of the power plant, in which case, can bring it out of order. To eliminate the effects of filling not that fluid will need overhaul Motor.

Filling volume

The filling volume depends solely from the engine litter. In the machine and mechanics in power installation The same amount of oil is poured. In more detail, the required amount of lubricant is shown in the table below.

Table - filling volumes

Replacement regulations

The official regulation prescribes the replacement of motor oil every 15,000 kilometers. Car owners note that when complying with such a service life, when driving a car of 60 thousand km, a problem with the massener may appear.

• there was overheating of the power plant;
• there was an ingress of others technical fluids in lubrication;
• the car owner prefers a sporty driving style;
• the car often moves through traffic jams;
• operation is prevailing on country roads or with an increased load on the power plant.

Replace lubricant after purchasing a supported car. This is due to the fact that the last car owner did not necessarily poured the original or similar operational properties Motor oil, and could use low-quality alive.

Normal oil consumption in Mitsubishi Lancer engine 9

According to the official data of the manufacturer, the entire line of power plants has the same tolerance for oil consumption. It is 1 liter of lubrication per thousand kilometers of run. Such consumption among car owners is considered too large.

According to the reviews experienced drivers It should be worried about the masserer when more than 200 grams of lubricant are burned per 1000 km of way. Weak place Motor are piston rings. They can heal when running at 60 thousand km.

Required tools

In order to replace the oil on Mitsubishi Lancer 9 successfully, the tools that are shown in the table below are required.

Table - List of tools required to replace motor oil on Mitsubishi Lancer 9

The key to dismantle the oil filter

The process of replacing the oil on Lanser 9 do it yourself

In order to replace the engine oil by car Mitsubishi Lancer 9, it is recommended to use the instruction that is shown below.

• Heat the power plant to operating temperature.
• Motor drowned.
• Unscrew the filler neck.
• Unscrew the drain plug.

Drain plug

• Substitute the container under the drain hole.

Drain of old oil

• To accelerate the drain of the spent lubricant, you must unscrew the filter. This is recommended to use a special key. With its absence, you can switch the filter housing and, using the handle as a lever, unscrew the filter element.

Oil filter location

• Clear the seat of the filter element from pollution.
• To prevent oil starvation of the power plant nodes during the first start, pour lubricant into the filter.

Filling with oil filter

• Treat a grease sealing gum.

Treatment of sealing rings

• Screw the filter into place from hand. Excessive effort should not be made, as it will complicate the subsequent disassembly.
• Split drain plug.
• Pour fresh oil into the engine.
• Tighten the lid of the oil cylinder neck.
• Control the absence of leaks from under the filter. If necessary, tighten it stronger.
• Launch the power installation of Mitsubishi Lancer 9. Heat to operating temperature.
• Control the level of motor lubrication with the help of probe. If necessary, add oil to the required level.

Many owners Mitsubishi. Lancer invariably think about the possibility self-substitution Oils in the engine of this car. Indeed, such service work does not pose a special difficulty, which allows them to do themselves independently, saving on the use of services of professional specialists. Tell you in more detail, as such a replacement of oil Lancer 9 is performed.

Preparing for replacement

In accordance with the recommendations of this manufacturer, the oil replacement in the Lancer 9 motor is recommended to hold every 10 thousand km of run. At the same time, if you use your car in the city and mainly through traffic jams, the oil change interval is recommended to cut up to 8,000 mileage kilometers. This substitution does not represent difficulties, and it can be done independently if there are looking Jama In the garage or corresponding overpass.

What oil pouring

Japanese automaker Mitsubishi recommends using in Mitsubishi Engine original oil or synthetic from Castrol. A 1.6 liter motor is required to replace about three liters of oil.

If before replacing you plan to perform complete, then you need to purchase the appropriate washing liquid and 3.5 liters of auto shock. You also need for this operation to lay the oil plug and filter element. The oil filter in the engine in Mitsubishi is better to use from MANN or original.

Required tool

To carry out such work, it will not be necessary to use some complex and professional tool. You will need a key size 16, filter puller or a conventional flat screwdriver. For the drain of the old oil, we recommend using a small trough or an old saucepan. It will come in handy a little rag.

Change the oil: step by step instructions

We offer you a fairly simple instruction for replacing oil in the engine Lancer 9 volume of 1.6 liters:

1. First you need to warm up the engine, which will increase the oil fluidity and will allow it to completely merge. That is why it is necessary to drive the car on the overpass or pit.
2. Next, in the pallet, we unscrew the drain plug, putting in advance under the carpenter the required volume of the container.
3. Usually it takes about 20 minutes to completely flow. After that, you can try to unscrew the oil filter. It is possible to do this manually, using a special puller or breaking the housing of the filter element with a flat screwdriver. Act carefully, because the heated metal elements of the power unit are located nearby, about which you can burn with inaccurate circulation.
4. Next, you can proceed to replace the filter element. Pour a small amount of oil inside the filter, after which we lubricate the sealing ring, install a new gasket and tighten the filter to the stop. Remember that the filter is twisted solely manually.
5. Next, we go under the car and tighten the drain plug.
6. Gently pour fresh oil into the motor. It is usually required to pour about three liters of a new lubricant, constantly controlling its level level.
7. Next, launch the motor and let it work for a few minutes. The first few seconds after the launch can be lit the lamp of insufficient pressure in the engine. Soon it will go out, and the engine will type the required pressure in the system.

Important. It should not be overwhelmingly a lot of self-samples, as this can lead to serious breakdowns. It is better to nourish a little, after which, by checking the dipstick, add the required amount than to pour and disable the motor.

The engine should be made to work for about 5 minutes, after which it is wasting it, we expect about 10 minutes, and check the level of self-loss again, if necessary, fill it. On this, all the work on the service is fully completed, and you can use your car.

Rinse the engine

In the event that the car is operated in heavy conditions Or you are not sure of the quality of the oil and the service that performed the previous owner, it is necessary to carry out the so-called engine washing procedure.

This washing is performed simultaneously with the change of auto. You need to additionally acquire about 4 liters of the appropriate flushing fluid. It should be inexpensive, and with her search usually do not arise any problems. Remember that there are various tools on sale that may vary by their action. That is why we recommend obligatory To get acquainted with the instructions for a specific means and only after that begin to these works.

Such a flushing of the engine is performed as follows:

1. It is necessary to merge the old oil, after which, without changing the filtering element, close the plug-in and pour the plug in force aggregate 3.5 - 4 liters of cleaning fluid.
2. We start the engine and let it work for about 10 minutes.
3. The engine after 10 minutes of operation of the wasting, unscrew the drain plug and drain the liquid for cleaning the motor.
4. Next, you can only change the filter elements and pour new oil into the engine. On this, all the work on the cleaning of the engine is fully completed. It is recommended to carry out such cleaning once every 50,000 kilometers of car run.

Conclusion

As you can see, the oil replacement work in Mitsubishi Lancer does not differ in difficulty. Each car owner, if desired, will be able to fulfill such a service independently, providing high-quality lubricant to the engine, and it will be possible to save several thousand rubles at such a service.

Remember only the fact that you are not recommended to save on the quality of the used lubrication. Therefore, take exclusively the original liquids and the corresponding filter elements by conducting this work in full compliance with the manufacturer's requirements.

The engine replacement in the engine must be carried out regularly. For example, experts recommends it to perform it every 10-12 thousand km. Although there are car owners who change the oil every 8 thousand km. It will definitely not be worse than this, the more often the oil in the engine is the better. In Mitsubishi Lancer 9 Replacing the oil of special problems does not cause, oil can be chosen in any car shop, and the oil filter is there.

Oil volume in engine Lancer 9

Depending on the volume of the engine, a different amount of oil is required. The larger the volume of the engine, therefore and more oil is required.

• 1.3 / 1.6 Motor - Oil volume for replacement of 3.3 liters
• 2.0 Motor - Required Oil volume 4.3 liters

If, when replacing the oil, you decided to change it on the oil of another brand, you should also buy a special wash oil And rinse the motor before replacing.

Characteristics of the required engine oil Lancer 9

The choice of engine oil is carried out on the basis of the manufacturer's manufacturer's recommendations for the type of motor. The oil must comply with the ASEA A3 and API SG (or higher) specification with the viscosity of the OW-30. OW-40, 5W-30 or 5W-40. Based on the temperature modes and the car run, the appropriate oil is selected.

For example, if you are operating a car in areas with strong motors, the thick oil is not suitable, the engine in a heavy frost will be difficult to scroll through it. In a hot climate, on the contrary, there is no meaning too liquid oil.

As a rule, most often car owners choose oils: SAE 5W-30, SAE 5W40, SAE 10W40. The choice of oil producer depends on preferences and recommendations. Marketing works more here, each brand oil makes a bet on some of its own features. Ultimately, the function has all one. However, some types of engine oils engine can "firm". It would seem with the engine all in order, and oil leaves. This does not mean that it is time to apply for the repair of the engine, it is rather oil.

1. After 100 000 mileage Try to change the oil more often
2. Do not buy cheap oils in dubious stores
3. When changing the brand of oil, always rinse the engine with washing oil
4. Oil filter must be changed with each oil replacement

For each car with an internal combustion engine at a certain time interval or the distance passed, the moment of replacing the oil and oil filter in the engine occurs. And each responsible car owner of the Ninth Lancer is sooner or late as a few questions: which oil replacement interval, what and in what amount to fill oil into the engine? If you look into any specialized auto shop, we will face with a large selection of engine oils, since each of them differs from others with its own characteristics: chemical composition (synthetic, semi-synthetic or mineral), viscosity, additive set and, most importantly, quality. In order not to have such questions and difficulties, let's try to understand all this.

Attention! All the following tips and instructions are written by the usual owner of the Ninth Lancer, which are based on many years of exploitation. this car. They cannot guarantee 100% of the correctness of reasoning, so listen to them or not, to solve only you.

Oil volume

Oil volume - This is the total volume of the oil poured, including the volume of the oil filter. As a rule, with any replacement of oil on any engine, it is impossible to completely drain the engine oil, so in the engine most often there remains about 0.2 - 0.3 liters of old oil. There is nothing terrible in this, it is not particularly worried.

Oil replacement interval

"Recommended" oil replacement interval in the engine for 9 lancer is 15,000 km. In quotes, because This interval will most likely help you only faster to waste engine wear, after which you may begin to interest another topic - increased zhore oil in the engine. If you search the Internet information about this, you can find an incredibly large number of reviews of the angry car owners of the Lancer of the ninth generation, which can reach 1 liter for 1000 km. I do not take as an example reviews of the second (or more) owners of Lancer, because on the odometer they highlight the figure around 50,000 - 100,000 km, and in reality, the mileage may be several times more.

For many years of operation and study of the forums revealed a small pattern. Who has 15,000 km from the oil replacement interval and the problems of Zhora oil began to appear after 60000 km, who changed the oil more often - there were much less problems.

In many, the oil replacement period is based on the car's distance traveled, but this is not entirely correct. After all, all internal combustion engines continue their work on traffic lights when the car is in a stationary state, or, in traffic jams, when the average speed can be 5-10 km / h.

Let's carry out minor calculations. Take as an example a period of oil replacement of 10,000 km and three owners. The first of them performs its movement in a densely populated point on traffic jams at an average rate for 10,000 km - 20 km / h. The second one also goes around the city, but already without traffic jams, and its average speed was 40 km / h. The third extremely overcomes the distance along the highway at an average speed of 70 km / h. By not very complex computing, we calculate the number of engine troubled watches: for the first - 500, the second - 250 and the third ~ 143.

What can be done from this? An oil change interval to everyone should choose individually depending on the style of driving and location, but in any case, change the oil is better not less than 10,000 km.

I'll tell you about my car. Starting from 30 km to 200,000 km, the engine replacement period in the engine was about 7500 km. Up to 15,000 meters, there were no absolutely no problems, after 15,000,000 km, a small consumption appeared: up to 0.5 liters by 7500 km.

Choosing engine oil

The main property of the engine oil is its viscosity, i.e. Dependence on the ambient temperature during the cold start of the engine in winter to the maximum oil temperature in the engine at the maximum load in the summer. Especially for this, the classification - SAE generally accepted at the international level, which brings the temperature range for the safe operation of the engine. Plant Mitsubishi. It recommends applying the following types of oils for 9 lancer depending on the ambient temperature:

After abbreviation SAE follow several numbers separated W. and dash, for example, 5W-40which is universal all-season oilYou can decipher so: 5w. - Low-temperature viscosity showing that the engine starting in the winter is possible at a temperature not lower than -35 ° C (from the number before W it is necessary to take 40). The second number (high-temperature viscosity) is impossible to simply take and translate to a normal and understandable language, because This indicator is a prefigure indicating the minimum and maximum viscosity of the oil at operating temperatures (100-150 ° C) of the engine. The higher this number, the greater the viscosity of the oil at high temperatures.

Universal oil for 9 Lancer is SAE 5W-30, SAE 5W40, SAE 10W40 (for not very cold places). What to choose the manufacturer, solve only you. It is not necessary to chase expensive oils, it is better to take cheaper, but it is more often changed. Over the entire history of operation 9 Lancer Lil semi-synthetic shell oil Helix Plus 10W40 (in summer) and Shell Helix 5W40 (in winter) and never experienced problems with launch due to oil.

What oil pour you? Tell us about it in the comments.