We independently install turn signals in the mirrors in the garage conditions. We independently install turn signals in the mirrors in the garage conditions how to install add-turns in the mirror

Automotive mirrors are important elements of safety. Different with simple design and compact sizes. Install in any serial machine, regardless of the brand and model of the car, the type of body and the level of the configuration. Differ in form and appearance. Combined with body design and common interior design.

Improve the visibility for the driver and allow you to evaluate the situation on the road. Simplify the movement process reverse and prevent from accidents and accidents. They contribute to the safer commitment of various maneuvers on the road (rebuilding, overtaking, throwing out obstacles, etc.). Autoser, depending on the installation site, are divided into 2 species - salon and side.

How the rear view mirror is arranged

1. Cases. There is a different form, more often than oval or rectangular with rounded edges. The design of the housing should be injurious, without sharp edges.
2. Reflective element. Sends information to the driver. It is a solid glass with a special reflective layer and an additional protective coating. For the safe operation of the vehicle, the presence of chips, scratches and sweepers on car meters that can affect the display quality is not allowed. It should not distort the color, increase or decrease the distance to objects, change their shape.
3. Devices for adjusting the tilt of the reflecting element. Allows you to adjust the angle of the optical element.
4. Mounting mechanism. Provides consolidation of the car at the installation site. Fasteners should be reliable as when driving along the way of good quality, and during the TS shaking on the traffic lights defects.

Additionally completed the folding mechanism. It should work smoothly and without jerks. To fold the mirror you need to apply the effort. If the mechanism has a minimal resistance, the optical element can suddenly be found when driving at high speed or during a strong shaking of the body.

Types of car mirrors

1. Salon (internal). Installed inside the cabin with a solid bracket. It is securely attached, but easily adjustable. Standard shape is rectangular, with rounded edges.
2. Side (external). Two side mirrors are installed in cars. One is on the left, and the second is right.

In addition to the basic safety and prevention functions on the roads, perform decorative. Complement and transform the appearance of the machine. For example, stylish lateral mirrors ("rapid" shape with beautiful turning repeat) give the automotive exterior sports traits.

On the right-hand drivers ("Japanese") used in the territory of the Russian Federation, an additional side mirror on the hood is installed for the convenience and safety of driving.

About panoramic mirror

Panoramic rearview mirror

The panoramic rear view mirror refers to the inner type of automotive mirrors. It has a spherical optical element and a large length in contrast to a standard flat mirror. Provides a more complete rear review, reducing the number of "dead zones". Promotes the improvement of visual perception, increases the viewing angle (up to 160 degrees on both sides). The main disadvantage is the distortion of the real distance from the car, in which the driver and passengers are located, to the object.

Uniformity of curvature is one of the basic requirements for the panoramic mirror. Otherwise, the form of reflected objects and distance to them will be very distorted. In some defective models, the autoser occurs the effect of "double reflection". It can confuse the driver, lead to incorrect score road situation and making an erroneous decision.

We need to get used to ride with panoramic car member. It is especially important to learn how to correctly determine the safe distance.

Panoramic mirror is selected individually for each car model. When it is installed, you must pay attention to the following points:

• high head restraints rear seats, wide rear racks and spare wheel on the trunk doors can close a large area of \u200b\u200breview;
• the unsuccessful choice of shape, size and installation site of the panoramic mirror may prevent the disclosure of sun visors.

Rear View Mirror with Built-in Monitor

Rear View Mirror with Monitor

Installed inside the cabin to the regular verge of car meter. It is a monitor capable of working as a conventional mirror. Differ overall dimensions - from small to large (9 inches).

Connects to. Works together. This contributes to the highest possible movement by reverse. Simplifies the process of maneuvering in difficult situations. The display shows the picture, prompts (information about the distance to the nearest obstacle) is displayed, the dimensions of the vehicle are indicated.

In more expensive car meters, it is possible to touch the control, installation of the memory card, connecting the front chamber or the DVR.

Setting up salon and side mirrors

1. Salon. Everything is very simple. Find the central point of the rear view. Simulate it with the central line of the rear window.
2. Side. Adjust the driver's seat for yourself. Return to the left, practically touching the side window. Install the left mirror in this position to see the rear wing of the machine. When ordinary landing, it should disappear from your field of view. Crop to the right to the head in the central part of the cabin (between driver's seat and chair front passenger). The right mirror should also be seen the rear wing. To check the adjustment of 3 autoser as a single rear viewing system, enjoy the use of the passenger. Ask slowly bypassing the car. At this point, it is necessary to monitor its movements in the rearview mirror. If a person disappears from one car aurkal and immediately appears in another (with small pauses), the number of "blind zones" is minimal. The side mirror is configured correctly.

Video: It is better to see once than read a hundred times - how to set up mirrors in the car and what is a dead zone

On additional options for lateral mirrors

Extra mirror for the dead zone

1. Electric drive Comfortable remote control system of mirrors, whose buildings are integrated compact electric engines. Different with minimal power consumption. The mirror control process is carried out using the buttons.
2. Rota repeaters. Provided additional safety movement, visually warning other participants road about maneuvers performed. Perform a decorative function, giving the car a stylish appearance. Installed from the factory or in the tuning process. As regular signposts of turns on the mirrors, conventional halogen lamps are used. In premium machines, LEDs are installed in their place.
3. Additional small mirror. Embed into standard side auto-board to the right of the driver. More often has a spherical shape. Improves visibility and reduces the number of "dead zones". It is an additional element of security. It is often installed on cars for learning new drivers.
4. Decorative lining. Made from ABS plastic, stainless steel, chromium, carbon and other materials. Make a car more stylish and unusual, isolated from a common urban flux. These are an additional protective element for the main mirror body. Some linings are supplied complete with rotation pointers. The installation process is carried out using mounting elements or special sealant glue.
5. . The heating system is working at the expense of special heating elements. And the coating of mirrors by condensate, prevents the formation of land. Ensures the driver from concerns by wiping while strong humidity on the street. Heated car metering is carried out from the car power supply of the car. Connection is made in several ways: parallel or separate (with a fuse, relay and switch).
6. . Light toning side mirrors can protect the driver's eyes from the reflection of bright headlights, strong - distort the color reproduction, reduce the overall perception of what is happening on the road.

There are 3 different heating elements used when heating outdoor car verse:

• resistive wire with insulation having heat-resistant properties;
• resistive element based on conductive paste. Applied by screen printing;
• heating element in the form of a film. At the same time is a reflective layer.

About making mirrors

Car Mirrors - Inalienable Elements safe Movement. Must be reliably installed and properly adjusted. But for the safe operation of the machine this is not enough. Another important factor is the correct cargo care. They must be kept clean, to remove dust and dirt in a timely manner, prevent strong icing during winter operation.

For this purpose, special car napkins, detergents and anti-freezing compositions are used. Protective coatings are applied, preventing the adhesion of dirt and effectively removing water. They are better to acquire in specialized stores on auto chemicals.

The repeater of rotation on the mirror is a fairly curious decoration for the car and the original tuning move. The fact that this is the device, its characteristics, the principle of operation, as well as the installation instructions - read below.

[Hide]

Device characteristics

Repeators can be attached absolutely to any vehicle. This is a fairly universal device, which is a plate equipped with LEDs.

Purpose and principle of work

Repeater is established by side glasswhich are responsible for moving back. They can be said to exchange information with original turn signals. It is done in such a way that when the driver will turn on the rotation notification, both devices - both regular, and the repeater - will show similar data. The type of duplicated values \u200b\u200bby car will also add a highlight.

On the automotive market You can easily find ready-made models that suggest their own installation, however, to the word to say, the device can be made with your own hands. Making turn signals in the mirrors with their own hands is easy, it will require only minimal skills and desires from the driver or mechanic (author - Tver Garage).

Installation Instructions

The installation of turn signals in the mirror involves the presence of some tools and skills. Below more about this business.

Tools and materials

To install the device, you will need:

• repeaters;
• file;
• key on 10 and cross screwdriver;
• glue;
• steel wire.

Stages

Repeators in the mirrors are set as follows in stages:

1. To begin with, it is necessary to dismantle the car mirror, that is, disconnect the fasteners and remove the mirror surface.
2. Next, disconnect the plate from plastic mounting. If the mirror is in a plastic frame, it is possible to pull it out using a hair dryer if some time heated the surface of the desired point. If it is suitable hermetically, then for the removal of a mirror surface, it is necessary to warm up from both sides to about 5 minutes. After it, you can withdraw. If it is attached by double-sided scotch, then it is necessary and the fastening frame.
3. If the mirror has an automatic heating, then it is necessary to carefully separate it to free a little space for the repeatar LEDs.
4. Next, you need to create arrows where LEDs will be attached. For marking, a regular notebook is used, where the points are drawn a future figure. One mirror can be installed about nine LEDs.
5. After marking, you need to duplicate the drawing on the tape marker. And in the scotch paste LEDs, given the polarity. LEDs are attached to the sticky side of the ribbon.
6. After that, you need to take the wire, clean it and separate five wiring, which you need to twist together and solder between the soldered LEDs and subtle wiring. Resistance when the minus wire switch must be 180 ohms.
7. Next, you should withdraw a mirror for mounting LEDs, immediately after the previous item will be checked for power supply. Now it is necessary to make a hole in the amalgam so that the LEDs that match with the markup were better visible through the mirror element.
8. You need to take a handwheel for metal and remove sharp holes from the mirror surface. It is done for stripping glass.
9. If the mirror is made of plastic, you can lower the resistance to 140 ohms. Thus, the LEDs will break through the plastic and the difference as such will not be.
10. At this stage you can start assembling. Because of the LEDs mounted on the mirrors, it is possible to make difficulties with the density of pressed the rear panel. To solve this problem, it is enough to warm the technical hairdryer problem placewhere there is a contact of the LEDs. IMPORTANT: Fasteners and latches it is impossible to warm up, in order to avoid deformation.
11. As soon as the plastic warms up to the desired temperature, it must be squeezed to the surface of the glass. In this form you need to hold a slightly mirror to "the village".
12. The final stage consists in connecting wires. The minus wire must be connected to the car body, and the plus to the airstarts. Thereafter useful device It will work regularly, duplicating the value of the turn signals, and its car will become even more interesting and individual.

IN last years of various types Tuning flourishes, despite the prohibition of the authorities to establish certain light devices. Today it is very popular neon lights. It is installed both inside the car and outside.

We will look at how you install the rotation repeater on the mirror on their own. There is nothing difficult in this, but it looks quite interesting. This species Tuning significantly facilitates maneuvers, since for road users, you become more noticeable.

Why start?

With a rotation repeater, it looks much better, you will see it yourself. It must be understood that there are several ways to implement the conceived:

• installing LEDs directly on the mirror;
• installing the repeater into the housing of the rearview mirror.

The first option is simple, but quite spectacular. The second is suitable for those who want to put the repeater of turn on the mirror from a particular car. Consider both options. But first, I would like to say that such a tuning is needed not only for beauty, but also for increased safety during the movement of the car. A bright example is to rebuild from a number in a row. The neighboring car that is on the halfpox from you may not see rear turning, and this increases the accident. The repeater on the mirror is visible perfectly.

We buy everything you need for tuning

The number of elements that we will install is not like that, so they will cost you inexpensively. The main thing is to forget anything and buy everything that may be needed. This list includes:

• 18 SMD LEDs;
• transparent quality tape;
• resistance elements (180 ohms and 0.5 watts);
• technical hair dryer;
• small soldering iron;
• 20 centimeters wire and a thin marker.

The presence of the above tool is necessary, so buying everything. Soldering iron, for example, not necessarily acquire. Most motorists he already has. Hairdryer can also be asked for a neighbor or rent for a couple of days. Everything else is not so expensive. Well, now we turn directly to the installation process.

We perform work quality

First stage - dismantling the mirror. There should be no difficulties here, since everything is extremely simple. First you need to remove the mirror from the case. Manufacturers use three main fastening methods: on sealant, dense fit in the case and installation on double-sided tape. In order to get a mirror, you need to warm the case after which it is necessary to extract it without any problems and proceed to markup.

This stage, though responsible, because the view of the repeater depends on it, but it is extremely simple. We take a sheet of paper into a cage and at equal gaps put the point. These are the locations of future LEDs. Next, we glue the tape to the sheet of paper and duplicate the marks on it. After that, glue LEDs to Scotch, not forgetting about polarity.

Soldering and collect design

Next, we take a pre-prepared wire and separated from it 5 lived. They need to twist and climb. After that, in parallel we connect the LEDs and solder thin wires. At the minus wire we sold the resistance to 180 ohms. We connect the power and check the performance. If everything functions, it means that the side mirrors with the rotation repeater are almost ready. If not, we are looking for a malfunction in the chain.

In order for the LEDs to be seen through the mirror, you need to make the appropriate holes in the amalgam. Remember also that not all products are glass, there are plastic. In the latter case, you can try to reduce resistance up to 140 ohms. The brightness of the LED will increase, and they will be visible through plastic. To install the mirror back, the housing you need to warm the hair dryer. It is not recommended to warm latches and fastenings, as they can deform. As for the wiring, the minus wire cling to the body, and the plus we lead to the aircraft track through the door.

Installing the repeater to the housing

Everything is somewhat more complicated here, as you need to cut the plastic case. It is extremely important not to hurry at this stage, since any inaccuracies will fall into a loosely landing of the repeater or an ugly appearance. Repeater can take from any car - everything depends on your preferences. There are also rotor repeaters on universal mirrors. Their advantage is the rapid installation and the availability of all the necessary posting for connecting. In our case, the wires need to be chosen and pull yourself.

The easiest way is set by the repeater of rotation on the left mirror, although there is no significant difference. The most responsible stage is cutting overlays. Everything needs to be done carefully and not hurry. After that, you can proceed to check and back assembly. Another point - you need to find wires going on the right and left turn signals. You are not always easy to get to the harness of the wires. It is located at the car threshold and passes through the cabin.

Conclusion

The easiest way to make LED repeaters on the mirror, if there are regular on the lining. Conducted by the presence of the wires you need. Although if there is no, there should be no difficulties in the search. The rotation repeater on the mirror may not work if you do not connect resistance. Although it will most likely function, but due to the voltage drops, the LEDs will be abrupt.

In general, everything is fairly realized. You can use universal repeaters. Their main plus is that they are already collected. All you need to do is remove the mirror, set the LEDs and connect the wiring. Manipulations on a sheet of paper is no longer required. But everything depends on you. You may want another color or the size of the arrows, and maybe you will choose an unusual form of the latter. There are many opportunities here, and how you implement them, it depends only from imagination. In general, the repeater is turning on the mirror - the thing is necessary and interesting. Why not do this craft in your free time, especially if there is a desire and opportunities.

Driving safety by car always remains in priority for each driver. He is responsible not only for himself, but also for passengers. Especially for this and developed "turn signals". Could indicate the direction where the vehicle rotates to optimize the movement of cars. One of the innovations of "Chinese craftsmen" is a repeater of turn on the mirror. We will talk about its installation today and talk.

The rotation repeater on the mirror duplicates the signal indicating the direction of movement

Basis of device

Installing such equipment is an original and decent decoration for the car. By virtue of its versatility, the repeater can be attached to any vehicle. The rotation device is a small device having a type of plate. This textiles base is quite durable and equipped with LEDs. There are some variants of models: Mounting into a reflective surface or installation of a flexible "signal" on the corners of the mirror. They have low cost, but they can be done with their own hands.

Principle of operation

The repeater is attached, which is responsible for the posterior view. They are connected to the original turn signals to produce similar information. When the driver turns on the rotation notification, the factory and installed device will show the same data. Duplication of the signal will also give the originality appearance car.

The market presents ready-made models that require only manual installation. But you can make turn signals in the mirror and independently - this is a pretty lightweight process that will require:

• lEDs or ready-made "turns";
• scotch;
• 2 elements causing resistance in 180 ohms and 0.5 W;
• 20 cm long wire;
• marker for marking;
• soldering iron.

Mounting Process: Disposal

If you are interested, turn signals in the mirror, first need to dismiss the elements of reflection. To disappear the reflective surface from the mirror, carefully drop fasteners. After that, you need to disassemble this element and plastic base. Usually the mirror is inserted into a special frame, fastened with glue or scotch. To do this, warm the surface with a technical hairdryer for five minutes, then the elements must be freely removed.

Marking and power supply

For self-assembly The devices are important to correctly specify the locations of the LEDs. Installing repeaters in the mirror is done using a marker, which is drawn a figure of nine-circles on the back of the reflective surface. Such a number of light bulbs is enough to ensure comfortable visibility. After that, the shape on the mirror is glued, and LEDs are installed. It is important that they are compared in polarity. They must be attached to the luminous side.

At the next step, you need to solder wires. To begin with their stripping, and dividing five veins. Then they need to twist among themselves. The resistance in 180 m is alternately soldered into the minus wire. Now it is checked, whether the power goes.

Cleaning mirrors

So that the arrow is visible through a reflective surface, it must be cleaned with excess material. When the whole design is tested for performance, and the markup coincides with the location of the light bulbs, you need to make small holes in the amalgam. LEDs must be cleanedly visible through a reflective surface. Next, it is necessary to clean the holes of the metal with the metal to remove sharp edges. It is important to remember that not all mirrors are made of glass. If the model is made of plastic, it will be enough to reduce the resistance in 140 ohms. In this case, the brightness of the light bulbs can pass through plastic.

Collect back

Many notice that the installation of turn signals in the mirror creates a loose fastening of LEDs. To do this, warm the hairdryer's rear panel in places where light bulbs are. But in no case can you warm fasteners! After sufficient warm-up, press the design to the glass - it will move a little and connect firmly. After a couple of minutes you can move to the last stage.

Wiring

In this process, it is enough to pay a "minus" on the body, and the "plus" should be removed from the door and connect to the aircraft. After that, the device will be as the rear turn signals.

Such manipulations are available to each motorist. Having spent a small amount of time, you can get high-quality mirrors with repeaters. This method is fully safe and requires only attention to the stages of work. Thus, you can independently improve safety on the road, because it is not always possible to notice the rear turns. In the case of mirrors, they will always be clearly visible to drivers from behind.

Of personal experience I would like to say that the repeater is useful trick. He is unusual for our places, so it is always noticeable, and therefore acts.