Recommendations for replacing lubricants in the automatic transmission of Ford Focus. Replacing Oil in the Ford Focus of the Third Generation Transmission Oil for Ford Focus 3 Robot

Regulated oil replacement in Ford Focus 3 automatic transmission 3 is not provided, it is explained by the accuracy of fitting all the parts of the gearbox and the change of lubricant only during the replacement of the entire automatic transmission. However, there are situations in which the oil in the box has to pour a new one.

In the service centers of Ford replacing oil in automatic transmission, it is quite expensive, in order to avoid overpayment, this operation can be made independently. With certain situations, the car owner has to repair an automatic transmission on Ford Focus. Most often, it fails due to external factors negatively affecting it.

In the event that you are not sure about the need to replace oil into the Ford Focus 3 automatic transmission, you can make a simple test. It will help to identify whether lubrication fluid copes with its function on required level. This requires to take a test of oil from the gearbox and produce a visual analysis of the sample.

If the liquid has darkened and lost the desired viscosity, then it should be changed. An alarming bell may be the presence in the lubricant of foreign impurities in the form of fine metal chips. This will talk about the processes of developing contacting parts and simply replacing the lubricant may not save automatic wear automatic transmission.

How to choose the gearbox oil

All Fords are very susceptible to low-quality lubricants, in the case of an automatic transmission of Ford Focus 3 this rule is only confirmed. Acquire oil only in dealer centers Or in the stores of confidence. The Ford Dealer Network goes towards its customers and even in the telephone mode you can consult with a specialist who recommends the best lubricant liquid For automatic transmission.

Most often at warranty and post-warranty service points in the automatic Ford Focus 3, WSS-M2C919-E lubricant is poured, but there are other decent analogues.

Required materials and tools for replacing oil

The main goal during self-replacement of transmission oil in motorists is accuracy in compliance with the proportions spent on this time secondary. However, it is possible to facilitate and speed up the process using a suitable tool, That's what you need:

1. Transmission oil - You should buy a five-liter canister, the full volume of the gearbox is 2.2 liters, the purchased canister is enough by 2 times;
2. Oil filter for an automatic transmission, for Ford Focus 3, it must be under the WSS-M2C919-E code. The use of the original American will cost two times cheaper than manufactured by European manufacturers;
3. Capacity for working out;
4. New rubber gasket under the pallet for sealing;
5. Sealant;
6. Tube from transparent capron or rubber;
7. Screwdriver cross;
8. Set of wrenches;
9. Set of hexagons;
10. Syringe - you can use medical for 20 cubes.

Step-by-step action

It is best to replace oil in a gearbox on an automatic lift, it will make it easier to test after filling a new lubricant. But a simple estacade or garage pit is quite suitable.

Important! If this is not done, then the magnet will continue to cope with its functions in the future, since only a certain amount of metal can attract.

• Docking places on the pallet should also be cleaned from the remains of the gasket. The sealant on which the gasket was kept should also be removed, and shine to the sanding place sandpaper;
• Install new filter in place and you can proceed to the installation of the pallet;
• Stick a new rubber gasket to the pallet using a sealant, and wake the connection location on the gearbox and the top of the gasket;
• Press the pallet to the landing place and tighten the bolts diagonally, after you can fix all the bolts, but try not to transmit the gasket;
• Disconnect the feed pipe from the cooling radiator and insert the prepared transparent tube on its place, the other end is lowered in its bucket with the development. Install the gearbox in the Parking position "P" and get the car;
• The exhaust oil from the hydrotransformer will begin to merge through the transparent hose, it will be dark color;
• Mock the car after approximately 1-1.5 liters in the effusion of testing;
• After pouring clean lubrication in about the same volume as the work out and repeat the procedure, until the light oil flows;
• Return the nozzles into your places and fix them. After checking the level of the oiled oil;
• Get the car and squeeze the brake pedal, while switching the box to all possible positions;
• Move the motor and wait about ten minutes, the oil should penetrate all remote locations in the automatic transmission;
• Repeat the procedure and measure the oil level, if necessary, add it to the desired mark and you can start riding.

If you are not sure that you can independently cope with the replacement of oil in automatic box Transmissions Ford Focus 3, then better refer to the specialists.

Transmission oil - Consumable material that supports the performance of the gearbox for a certain period. Oil change is performed according to the regulations. Also here are also taken into account various oil compatibility parameters with a gearbox. In addition, the volume of oil poured oil is equally important. The procedure for selecting and replacing the oil does not take much time, and with it any inexperienced motorist will cope with this - for example, the average owner of Ford Focus foreign cars 3. The information in this article will be relevant for the owners of a popular car equipped with automatic transmission.

Third generation Ford. Focus is equipped with semi-automatic box PowerShift.in which the transmission oil is designed for the entire service life.

At least the manufacturer does not indicate the exact replacement regulations. In this regard, it is necessary to navigate the condition of the oil, since under the influence of negative factors, the liquid will sooner or later loss beneficial features. The oil change will probably need in special cases.

Let's call some of them:

• Over speed, full time job Engine on high speed, sharp maneuvers
• Variable climate - frosts are replaced by warming, or vice versa
• Dust, dirt and slush on the roads, off-road

Sigor conditions over time will be felt about themselves, and at the most unexpected moment. The frequency of breakdowns in the checkpoint due to unsuitable oil is so unpredictable that soon it may be necessary overhaul transmissions. The only way out of this situation is to establish a certain replacement regulation, and initially rely on it.

For example, a replacement period can be an average of 80 thousand kilometers - it is at best, and at worst - the regulations will have to shorten up to 60 thousand. The situation may be more complicated if the fault in the short life of the oil lies on the drivers themselves, which often violate traffic rules and exceed the speed, despite difficult weather conditions. But on the other hand, the car often has to expose to high loads, which can be explained by a difficult climate and low-quality roads. In addition to more frequent replacement, Russian owners should regularly check the volume of fluid and monitor its condition.

Check the volume and condition of the oil

PowerShift gearbox in the Ford Focus 3 car is non-liable, and it does not provide traditional dimensional probe. The number of remaining oils in the transmission can only be checked in one way - to install the machine to support, and thereby ensure access to the bottom of the car. Carter pallet is completely removed. On the body of the gearbox there are three holes - drain, bay and control. You need to open the control opening, and make sure in a sufficient level of oil. If the oil drying is dry, and it does not see any traces of oil, it means that it will be necessary to top. The topping should be performed until the moment when the oil begins to appear or flow from the control opening.

We note that one oil topping will not be enough if the consumable material has lost all its beneficial properties, and is no longer able to protect the components of the CAT from overheating, and provide them good cooling. It is possible to determine the dissent of the oil in three signs - by the specific smell (it can be burned), the presence of precipitate and metal chips, as well as a color change - with transparent on dark brown. All this unequivocally indicates that the oil is outdated, and it cannot be mixed with new oil. In this case, first need to merge the old oil.

Select oil for Ford Focus 3 automatic transmission 3

Before pouring a new liquid, you must once again make sure that it meets all the parameters described in the instruction manual. So, the manufacturer Ford advises to fill only original product With the designation of WSS-M2C200-D2. Such oil has optimal viscosity characteristics, resistant to low temperatures and is designed for a long shelf life. As for the type of oil, only synthetics are suitable for the "robot" of Ford Focus 3. In extreme cases, you can pour and semi-synthetic, but only with a large run.

How much to fill

Semi-automatic Power PowerShift, which is equipped with Ford Focus 3, seats about 2 liters of oil. So much fluid will include with a complete replacement, that is, after the complete cleansing of the transmission from the old oil. This procedure is performed using a washing agent. Flushing is driven through the entire gearbox when the engine is turned on. Then the exhaust fluid is drained, after which the new oil is in full. If the flushing does not perform, it will be possible to pour no more than 1.6-1.7 liters of oil.

At the moment, the PowerShift oil replacement on Ford Focus 3 causes quite a lot of questions. The fact is that the automatic transmission of this type generally cause a certain degree of uncertainty because they use complicated scheme work based on double clutch. However, the procedure for replacing lubricant in gearboxes is not much different from such replacements on other PPCs. The difference is only in the type of engine oil.

Replacing the lubricant component in the gearbox is carried out in strict accordance with the manufacturer's regulation. At the same time, the use of non-certified oil is unacceptable. Highlights that must be followed as part of this procedure are as follows:

• work on professional certified equipment;
• use only regulated lubricant;
• accuracy when working with the checkpoint;
• accurate following the recommendations of the manufacturer.

In our car service, you can change the oil into the automatic automatic transmission of the PowerShift type with a warranty. In addition, the service specialists will provide you professional consultations For the operation of the car with similar gearboxes.

Why is it so important to replace oil PowerShift Ford Focus 3

So, you have a car with Ford Focus 3 PowerShift automatic transmission. Replacing the oil in it, according to the regulations, is carried out at least once every 100 thousand kilometers. You can meet this opinion that the oil change in the checkpoint, allegedly, is not needed. This is true only for some generations of FF, equipped exclusively by a manual transmission. Why is it important to change the oil in the automatic transmission?

The fact is that the lubricant provides the following:

• stability of the gearbox functioning;
• long service life of the node;
• optimal temperature conditions;
• protection against damage and corrosion of internal elements, etc.

It is worth considering the fact that with time the transmission oil, fill in the automatic transmission, loses its properties. And therefore, only fresh and clean lubricant can ensure the execution of all its functions.

What functions performs lubricant?

With importance timely replacement We dealt with lubricants. Now we will analyze the specific functions of its function to clarify why the inspection of the car Ford focus 3 is so important.

In the next part of our material, it will be discussed precisely about the oil filter PowerShift automatic filter.

Replacing oil and filter in Ford Focus automatic transmission 3

ATTENTION! If you needed to replace the oil automatic transmission for Ford Focus 3, then in obligatory Replace the filter element. This will extend the lubricant life and guarantees its efficacy and long-term safety of properties.

The filter in any oil system is very important. This is due to the fact that any major node in the process of work produces minor pollutants - the smallest particles of metal, third-party elements, like sand, bunches, etc.. Of course, they should be output from the system to ensure its most efficient work.

That is why there is an oil filter that delays such pollutants, eliminating all foreign elements from the system and ensuring its stable functioning. What in engines that in gearboxes oil filters Must change with the update of lubricant.

Ford Focus 3 PowerShift: Oil Replacement

Like any change of lubricant in gearboxes, oil replacement in the Troop type automatic transmission shift on focus 3 is carried out by a special way. To trust this procedure best to all our specialists, because only in this case you will be guaranteed a good job of the aggregate.

The replacement is made according to the following scheme:

Replacing oil on focus 3 with Top Shift: selection of lubrication

Of course, if it came to replacing the oil in the turn of Shift on Focus 3, then it should be used exclusively with a lubricant that is approved by the car manufacturer. The main feature is that it is for the automatic transmission system that the PowerShift system uses special oil, which differs from other transmission fluids.

This is due, first of all, so that the mode of operation of such a gearbox is extremely tense, respectively, and the lubricant must be more enduring. In addition, the pressure inside the ordinary automatic transmission differs from the pressure inside the type of automatic type. Accordingly, the viscosity of the lubricant used in the second case should be different.

Our masters strongly recommend purchasing only oil recommended for such transmissions, which has passed all the tests and approved by the manufacturer. Only in some cases is allowed to use the lubricant of another brand, but necessarily possessing the same operational characteristics and viscosity indicators.

Consequences of untimely oil replacement in Ford Focus 3 "Automatic"

The late or non-professional oil change in Ford Focus 3 with the automatic box can lead to extremely serious consequences:

• long operation of the automatic transmission on the old lubricant leads to accelerated wear internal components, the appearance of scaling, corrosion, to wear sealing elements, etc.
• for wrong selection transmission fluid Increases the load on all the "automaton" nodes, it leads to a lack of operating temperature, depreciation of the seals, decrease in the performance of the node,
• when using low-quality lubrication, an increased load occurs on the internal elements of the box, its wear increases, the risk of failure,
• with regular use of a transmission that does not comply with the requirements of the manufacturer, there is a significant risk of failure.

ATTENTION! In order not to encounter similar problems, contact our specialists who will help you understand the situation and choose the appropriate type of lubricant for your car automatic transmission.

Why do you need to contact us?

Our company has tremendous experience in the repair of car Ford cars, regardless of model, configuration and installed equipment. All you need is to contact our experts and sign up for a convenient time for you. Well, we will provide a whole range of advantages that will make cooperation with pleasant and mutually beneficial:

• individual approach to each client;
• the presence of the entire spectrum of the necessary equipment;
• guarantee of quality of work;
• full package of necessary reporting documents.

The Ford Focus 3 generation car came to replace her predecessor, and did it quite well. The car remained reliable, became more modern, equipped with topical electronics. E.that is not the most expensive representative of the Ford autoconecern, but it is Focus who is among the best-selling cars in the world. ACPs installed on focus 3 cause many questions. This is a rather controversial version of the gearbox, not all is solved on the purchase. Although in practice the transmission is working clearly, without special complaints on efficiency and durability.

Replacement frequency

Until now, motorists and experts cannot come to a common opinion regarding the replacement of oil into the ACP on Ford Focus 3. Therefore, it is necessary to consider this question in detail and give the appropriate recommendations to car owners.

Let's start with the information provided by the official operating instructions for the Ford Focus 3 generation. It indicates that the oil fill in the automatic transmission (PowerShift) serves during the entire period. That is, it is not necessary to change it. Because of this, some difficulties arise regarding the replacement procedure in those who are resolved Contrary to the manual to change in the automatic transmission liquid.

Specialists advise still not to repel from the official operating manual, and periodically change lubricant in the gearbox. The only question is when you will change the oil, and on what mileage the replacement will be needed.

In the case of a box-machine installed on Ford Focus 3, the replacement should be carried out every 100 thousand kilometers of the mileage. This is the average optimal duration of the lubricant.

If the operating conditions are heavy, then the interservice interval is reduced to 60 - 80 thousand kilometers. Practice shows that even in Russia, the tricks 3 behave well, the boxes are withstanding the local climate and the low quality roads. Therefore, most car owners without any problems will be 100 thousand kilometers and even more.

There is nothing eternal, so that the statement about the "unhappiness" of the factory lubricant in the focus automatic transmission cannot be considered fair. As oil, oil will lose its properties and characteristics. The box will start working with interruptions, there will be serious problems and breakdowns. As a result, expensive repair will be required.

Considering these facts, it is better to periodically change the lubricant and extend the service life of the gearbox than to deal with complex and financially costly repair. With strong wear of the automatic transmission, its complete replacement may be required.

Try to watch out how many km. You have passed on the old oil, periodically checking its condition. If notice explicit signs Liquid wear, be sure to send the machine in the car service or change the lubricant yourself. In the case of the Ford Focus Car 3, the oil replacement in robotic automatic transmission can be performed with their own hands in the presence of appropriate tools, conditions and skills.

Volume and condition

Since the gearbox on the Ford Focus 3 model refers to a non-servant automatic transmission, there is no traditional dimensional probe. This somewhat complicates the procedure for measuring the volume of fluid in the crankcase, but does not make it impossible.

Before checking the oil level in the gearbox, you need to put the car to the supports and access the bottom. Here you do not need to dismantle the palter pallet, since it is quite possible to do without these manipulations.

On the automatic transmission housing, the control hole is provided, which is used in the case of checking the level and state. Take a look at it and look at how much inside lubrication fluid.

If the hole is dry and does not have traces of oil on its surface, it says about insufficient level Lubricants. Special filling syringe should be taken and add a small amount of substance. When the oil begins to flow through the control hole, the level is due to normal. You can close the plug.

But sometimes the topping does not solve the problem of wear of the gearbox. Having understood how to check the oil level in the automatic transmission, you should also take a sample composition for analysis. The liquid is tested extremely simple. There are three characteristic features indicating the wear of the substance and the loss of its physicochemical properties:

All this suggests that the oil used in the box is already unsuitable for further use. Just topping the missing amount of fluid, you do not correct the situation. It is necessary to completely drain the lubricant and pour a new one in Carter to eliminate the likelihood of failure automatic transmission On your car Ford Focus 3.

Select Oil

Mix old and new oil is definitely not an option. Therefore, if necessary, change the working fluid arises a legitar than choice. Motorists often interest what oil pour into the box so that their Ford Focus 3 will not suffer and can change the transmissions to the most effectively.

This is a really important question, since Ford is very demanding good lubricant. The better there will be a transmission oil, the longer the machine will last. Bay in the Carter low grade composition, wait in the near future trouble in the form of breakdown and expensive repair.

For an automatic box, which is installed on Ford Focus 3, only required synthetic oil. In extreme cases, you can use semi-synthetic. But it is done only when the car is operated for a long time and has a big mileage.

An ideal solution for Ford Focus 3 will be the original oil from Ford, which has the designation WSS-M2C200-D2. This is an oil called Ford Motorcraft Mercon V. With access to it, there are no problems yet, therefore it can be purchased without much difficulties.

Acquire lubricant follows only official dealers, certified sellers and stores you trust. If for some reason you cannot buy the original composition or do not want to look for alternative lubricant among leading manufacturers of transmission oils:

• Castrol;
• Shell;
• Motul;
• Liqui Moly.

The experience of Ford Fokus Focus 3 shows that it is not worth risking and experimenting here. Original oil It is quite adequate for the price and is cheaper of some analogues. But you will be completely confident that the work of the box on this lubricant will not bring any unpleasant surprises. The fill of the neoriginal composition is always accompanied by certain risks.

Required quantity

With the choice of oil figured out. Now it's time to find out what oil it is necessary to fill in the automatic transmission car Ford. Focus 3 generation.

Most gearboxes involve using a minimum of 4 to 5 liters of lubrication. In some cases, the volume comes to 8 - 10 liters on ordinary cars.

But a robotic automatic box, which is called PowerShift and is placed on Ford Focus as an automatic transmission, has a filling volume of only 2.0 liters.

Consider one important moment. Filling volume It does not correspond to the one that you can pour with a self-replacement. In practice, only in case of complete cleaning of the crankcase, it is possible to use 2 liters of new lubricant. For this use flushing compositions and special devices. They bring all old liquid From the system.

If you skip the flushing stage, in fact, which does not give serious changes in terms of the behavior of the gearbox, then it will be possible to pour 1.6 - 1.8 liters of new transmission oil.

In any case, buy a canister for 2 liters. Since the shelf life of more than 5 years, you can purchase a 5 liter container in order to be able to then change the lubricant after the interval interval. Decide yourself.

Tools and materials

The main mistake of most of those who decide to independently change the oil in automatic transmission on Ford Focus 3 is a hurry. Trying to do everything quickly, car owners often violate the sequence, allow for errors, which leads to the need to correct the situation for a service station.

Such cases have become a weighty argument for car services to say that only professionals will be able to correctly change the oil in the box on the 3 generation focus. As you already understood, it is not quite so.

To make your own hands to perform the whole range of works, you need to prepare tools and consumables. You will need:

If you are going to rinse the system, then take the canister with oil on 5 liters. Otherwise, you do not have enough fluid to simultaneously clean the crankcase and pour fresh lubricant there.

The process has its own characteristics and nuances. But you should not be afraid to serve the car yourself. Most Ford Focus 3 owners easily cope with the task, so you can cope and you.

Step-by-step instruction

Such services in specialized service centers ford. quite expensive. This serves as one of the key factors for the transition to independent service.

To replace oil in the automatic transmission on Ford Focus 3, you should follow step by step instructions.

All, on this procedure for self-replacement of oil in an automatic transmission switch on the Ford Focus 3 generation completed.

The work is not the simplest, if you compare with some other machines. But there is nothing that it will not be able to make an ordinary auto owner, having a standard set of tools and an observation pit in the garage.

If you are not confident in your abilities or simply do not want to risk, then contact the service center. It is better to do this on specialized hundred Ford, since their specialists know all the features and nuances of working with the automatic transmission of such a model as Ford Focus 3.

Look interesting video On this topic:

In a pair with a 2.0 l engine on Ford Focus III A manual transmission MTH75 was installed, while 1.6 l engines were equipped with a MCPP series B5 / IB5. Also the car was equipped with PowerShift 6DCT250 and 6DCT450 automatic transmission, which are robotic boxes Transmissions with two clutches. Consider how to change the oil in the PPC on the Ford Focus 3.

How often to replace oil in the gearbox?

In the mechanical gearbox, the lubricant is poured for the entire service life. Therefore, the oil change in the MCPP Ford Focus 3 is recommended only if the gearbox is repaired. Such practice is extremely common among automakers, but for a long and serviceable transmission service, the oil is still better to change every 100 thousand km.

As in the case of the manual transmission, the robotic transmission with dry clutch 6DCT250 is not provided. On the 6DCT450 manufacturer recommends changing the transmission fluid every 45 thousand km. Conducted by the fact that in the design of 6DCT450 used wet clutch, so friction linings wear products clog fuel filter, fluid circulation channels in mechatronics.

Select Oil

In robotic gearboxes, you can fill a transmission fluid with the WSS-M2C200-D2 tolerance. For grease gears mechanical box B5 / IB5 recommended oils with the WSD-M2C200-C specification (class- API GL 4/5).

For MTH75, the WSS-M2C200-D2 specification is recommended. If the specifications and class are met, then the long operation of the CAT will provide as original products Under Ford label and good analogues (for example, Castrol, Motul, Shell, Mobil 1, Araral). Recommended viscosity for manual transmission - 80W-90 (for regions, where the temperature often falls below -30ºС, it is desirable to pour 75W-90).

Oil change in MCPP FORD FOCUS 3

For self-replacement you will need looking Yama. You can pour new oil with a special syringe, but it is much more convenient to follow the instructions and use the bay hole. Other tool, you will need end heads on 8, 19, hexagon on 8 or TORKS T-50.

Replacing the oil in the Ford Focus 3 box should be produced in the first 10-15 minutes after the trip. Warp lubricants It becomes more liquid, which allows faster to merge more liquid.

Instruction

Replacing oil in automatic Ford Focus 3

Before self-replacement Oils on Ford Focus III with 6DCT450 Do not forget to buy a new filtering element (on the "robot" with dry clutch, the filter is not installed).

For replacement it is necessary:

• to unscrew the hexagon cork with the plug hole, which is located in the upper part of the gearbox. For access to it, it will be necessary to remove some parts hinged equipment. The plug of the fuel hole can not be unscrewed if you have a syringe, with which a new oil can be poured through the holes for level control;
• remove the engine shield mudguard;
• unscrew the level control plug;
• unscrew drain plugs;

• wait for the anticipation of the old transmission fluid and tighten the drain bolts;
• with the help of a watering can or syringe, pour a new lubricant (until it flows from the hole of the control bolt);
• using a clay key, unscrew the filter. At the time of unscrewing, the plastic holder should be created by a screwdriver or another suitable object;
• install a new filter element. Before installing the filter, fill it with your home with clean butter.

After the fill new liquid, twisting the control, fuel bolts and installation of the mudguard. Replacing the oil in the automatic Ford Focus 3 can be considered successfully completed.

Video