Recommended engine oil for Nissan Almera. Best engine oil for Nissan Almer. Lubricants for Nissan

Very popular budget foreign car in our country - Nissan Almer.A priori operation of such a car involves the use of only the highest quality supplies. Let's try to figure out that we offer us modern manufacturers and what better oil Pour into your own engine.

Natural Synthetic - Esso Ultron 5W-40

The first thing we drew attention is the stated heat-oxidative oil stability. In practice, she was, to put it mildly, very weak. We poured oil into the engine Nissan Almera. And they were unpleasant surprised when kinematic viscosity fell very much.

The manufacturer declares about the compliance of its own product to top standards and provision reliable protection Any engines. However, in practice, Esso Ultron 5W-40 took the leading positions, first of all, on the Ugar - so, during the test, the total volume decreased by about 1.3 liters.

However, the positive dynamics was seen - an increase in capacity, as well as a very significant decrease in fuel consumption (about 2.5 percent).

It is not necessary to talk about the long exploitation of oil - we failed to drive 15 thousand on one portion. For ESSO ULTRON 5W-40 ceiling - 10 thousand kilometers.

Motor oil Shell Helix. HX8.

Pay attention to the specification from the manufacturer. Stated that motor oil Shell Helix HX8 was developed when using active cleansing technology - thus prevents the formation of precipitation and possible accumulation of dirt. Shell Helix HX8 for Nissan Almera was designed specifically to optimize the engine and increase the return on its work. There is a motor with high efficiency (throughout without exception of the oil replacement interval).

But advertising, as they say, advertising - we will pay attention to the results of real tests. As practice has shown, Shell Helix HX8 shows very good results (first of all, we are talking about heat-oxidative stability). Kinematic viscosity throughout the entire period operation remained in the stable limits.

During the engine operation, approximately 1.2 liters of oil burned down - it would be just fine, if there was less Ugona. High-temperature deposits pleased - more precisely, their almost complete absence (for such a shell Helix HX8 is in the leader line).

Very much increased engine power - with long-term operation, it turned out very noticeable. But, together with this, fuel consumption and consumption are about 1.5 percent.

Especially for Nissan Almera - Total Quartz 9000

The manufacturer declares about the possibility of all-season exploitation of its engine oil not only in gasoline, but also diesel engines. We also promised a complete compliance with even the most stringent requirements for diesel and gasoline aggregates .... But without real confirmation, this advertisement is not worth a penny - let's understand that there is something.

In fact, the results of the testing of Total Quartz 9000 motor oil leave very controversial impressions after themselves. Indeed, the kinematic viscosity when conducting the tests changed not so seriously, but the iron content is by no means pleasing - the indicators are very high. About 1.5 liters of oil went to the avgar. But high-temperature deposits in the engine practically did not remain.

We conducted a series of tests, as a result of which a 3 percent increase in power was seen, as well as a decrease in fuel consumption by 3.2%. However, when a run of 12 thousand kilometers is reached, the indicators of the economy have come to no - on the "pouring oil" Nissan Almera increased fuel consumption by 2 percent.

Afterword

We did not pay much attention to such an important indicator as the washing capacity of the oil. The reason is to assess this parameter, quite serious tests are required, they failed to enter the expertise programs.

However, indirect signs are still present and it is they who helped us in determining the result.

So, let's talk about the tendency to form deposits - it is characterized, first of all, the volatility of oil. The lower it will be, of course, the oil is more resistant.

A bright example is Esso Ultron 5W-40, its temperature was approximately 209 degrees Celsius. Dirt remove detergent additives found in oil. However, the volatility of this oil was enough high level - But, nevertheless, the result turned out to be balanced.

The chemical composition of lubricants is optional to study before planned change of car. It is enough to familiarize yourself with Manul to the car. In this documentation, the manufacturer describes the parameters of the recommended motor oil for Nissan Almera.

Nissan Almera Classic B10 2006-2012 release

If we consider the instruction manual for the Nissan Almer, then the manufacturer of the car is recommended to use lubricating mixtures that meet the requirements:

• original automal company Nissan;
• in accordance with the API classification, the type of oil SH, SJ or SL;
• according to the ILSAC standard - GF-3;
• the viscosity of the lubricant is selected according to Scheme 1;
• the approximate volume of the mixture for replacement with regard to the oil filter is 2.7 liters (without filter - 2.5 liters).

The approximate volume of the car is calculated on the basis of a fusion lubricant, excluding the engine mixture remaining after the drain in the motor.

According to the Regulations, you need to use motor mixtures:

• if the temperature is from -30 ° C (and less) to +30 ° C (and higher), pour 5w - 20,
• at temperature conditions from -30 ° C to +30 ° C (and higher), 5W - 30 are poured;
• if the thermometer shows from -20 ° C (and less) to +30 ° C (and higher), pour 10w - 30; 10w - 40 (7.5W - 30);
• in the temperature range from -10 ° C to +30 ° C (or more) use 20W - 40;
• at temperature mode from -10 ° C to +25 ° C poured 20w - 20;
• from 0 ° C to +30 ° C (or more) Apply SAE 30.

QG 15DE 1.5 L and QG 16DE 1.5 L and QG 16DE - operate on gasoline.

Nissan Almera N16 2000 - 2006 release

• nissan's original lubricants;
• according to aPI classification - type of oil SH, SJ or SG (prohibited Application API - CG-4);
• according to the ILSAC standard GF-I, GF-II, GF-III;
• quality class for ACEA - 96-A2;
• the viscosity of the lubricant is selected according to Scheme 2;
• the approximate volume of the engine mixture for replacement with regard to the oil filter is 2.7 liters (without filter - 2.5 liters).

Gasoline power units - QG15DE 1.5 L and QG18DE 1.8 l.

• at temperature conditions from -30 ° C (or less) to -10 ° C, pour 5w - 20 (this oil is not recommended to use if the machine is often exploited at high speeds);
• at temperature mode from -30 ° C (and less) to +15 ° C, 5W - 30 are poured (automation helps reduce consumption fuel mixes car);
• in the temperature range from -20 ° C to +15 ° C, pour SAE 10W;
• if the thermometer shows from -20 ° C to +40 ° C (or more), use 10W - 30; 10w - 40; 10w - 50; 15w - 40; 15w - 50;
• if the thermometer shows from -10 ° C to +40 ° C (or more), use 20w - 20; 20w - 40; 20w - 50.

It is better to apply 5W-30 lubricant.

Nissan Almera G15 since 2012

According to the manual, it is necessary to use lubricants that meet the requirements:

• branded engine fluids Nissan;
• quality class by ACEA - A1, A3 or A5
• according to the classification of API -SL or SM;
• vissedy parameters motor fluids selected according to Scheme 3;

The approximate volume of the car for replacement is 4.8 liters (including oil filter) and 4.7 liters (excluding the filtering device).

According to the regulations, it is necessary to pour motor fluids:

• in the temperature range from -30 ° C to +40 ° C (and above), 0W-30, 0W-40 is poured;
• if the thermometer shows from -25 ° C to +40 ° C (or more) Apply 5W-30, 5W-40;
• with the thermometer indicators from -25 ° C to +40 ° C pour 10W-40.

Preferably, apply 5W-30 oil.

Conclusion

Recommended motor oil for Nissan Almera can fill the gaps in friction pairs of a certain type of engine to protect the motor from abrasion and overheating. Pouring a more thick or liquid car worsen performance features The power unit will lead to his breakdown.

Manufacturers of lubricants use various bases of lubricants (synthetics, semi-synthetic, mineral water), dominated different chemical additives. The fact that the machine is a specific brand is suitable for a specific machine model, can testify to the canister tolerances. At the same time, the mixtures for the summer, buy more viscous than for the winter.

Look interesting video According to this topic:

The chemical composition of lubricants is optional to study before planned change of car. It is enough to familiarize yourself with Manul to the car. In this documentation, the manufacturer describes the parameters of the recommended motor oil for Nissan Almera.

Nissan Almera Classic B10 2006-2012 release

QG 15DE 1.5 L and QG 16DE 1.5 (6 L and QG 16DE 1.6, operating on gasoline.

If we consider the instruction manual for the Nissan Almer, then the auto manufacturer is recommended to use lubricating fluids that meet the requirements:

• original automal company Nissan;
• in accordance with the API classification, the type of oil SH, SJ or SL;
• according to the ILSAC standard - GF-3;
• the viscosity of the lubricant is selected according to Scheme 1;
• the approximate volume of oil for replacement with regard to the oil filter is 2.7 liters (no filter - 2.5 liters).

The approximate volume of the car is calculated on the basis of a fusion lubricant, excluding the lubricant remaining after the drain in the motor.

According to Scheme 1, you need to use motor lubricants:

• if the temperature is from -30 ° C (and less) to +30 ° C (and higher), pour 5w - 20,
• at temperature conditions from -30 ° C to +30 ° C (and higher), 5W - 30 are poured;
• if the thermometer shows from -20 ° C (and less) to +30 ° C (and higher), pour 10w - 30; 10w - 40 (7.5W - 30);
• in the temperature range from -10 ° C to +30 ° C (or more) use 20W - 40;
• at temperature mode from -10 ° C to +25 ° C poured 20w - 20;
• from 0 ° C to +30 ° C (or more) Apply SAE 30.

Nissan Almera N16 2000 - 2006 release

Gasoline power units QG15DE 1.5 L and QG18DE 1.8 l.

• nissan's original lubricants;
• according to the API classification - the type of oil SH, SJ or SG (prohibited the use of API - CG-4);
• according to the ILSAC standard GF-I, GF-II, GF-III;
• quality class for ACEA - 96-A2;
• the viscosity of the lubricant is selected according to Scheme 2;
• the approximate volume of engine oil for replacement with regard to the oil filter is 2.7 liters (without filter - 2.5 liters).

According to the Scheme 2, the manufacturer is recommended to pour:

• at temperature conditions from -30 ° C (or less) to -10 ° C, pour 5w - 20 (this oil is not recommended to use if the machine is often exploited at high speeds);
• at temperature mode from -30 ° C (and less) to +15 ° C, 5W - 30 poured (the car helps to reduce the fuel mixture consumption by car);
• in the temperature range from -20 ° C to +15 ° C, pour SAE 10W;
• if the thermometer shows from -20 ° C to +40 ° C (or more), use 10W - 30; 10w - 40; 10w - 50; 15w - 40; 15w - 50;
• if the thermometer shows from -10 ° C to +40 ° C (or more), use 20w - 20; 20w - 40; 20w - 50.

It is better to apply 5W - 30 lubricant.

Nissan Almera G15 since 2012

According to the manual, it is necessary to use lubricants that meet the requirements:

• branded engine fluids Nissan;
• quality class by ACEA - A1, A3 or A5
• according to the classification of API -SL or SM;
• the viscous parameters of motor fluids are selected according to Scheme 3;
• the approximate volume of the car for replacement is 4.8 liters (including oil filter) and 4.7 liters (excluding the filtering device).

According to Scheme 3, it is necessary to pour motor fluids:

• in the temperature range from -30 ° C to +40 ° C (and higher), 0W - 30, 0W - 40 are poured;
• if the thermometer shows from -25 ° C to +40 ° C (or more) Apply 5W - 30, 5W - 40;
• with the thermometer indicators from -25 ° C to +40 ° С pour 10w - 40.

It is preferable to apply oil 5W - 30.

Conclusion

Recommended motor oil for Nissan Almera can fill the gaps in friction pairs of a certain type of engine to protect the motor from abrasion and overheating. The fill of a more dense or liquid car will worsen the performance characteristics of the power unit, will result in its breakdown.

Manufacturers of lubricants use various bases of lubricants (synthetics, semi-synthetic, mineral water), dominated different chemical additives. The fact that the machine is a specific brand is suitable for a specific machine model, can testify to the canister tolerances. At the same time, the car for the summer, they buy more viscous than for the winter.

Cars concern Renault Nissan. Any good performance characteristics and build quality. Truly motorists got acquainted with machines Nissan. Back in the 90s of the last century, when the used automotive equipment was actively versed in Russia. Since then, the army of fans of cars from this manufacturer is growing steadily.

How Nissan Almera Classic appeared in Russia

It is noteworthy that the Nissan Almer N16 machine was designed by Nissan, although in 1999 year Nissan. And Renault has already been united. The Korean company Samsung Motors was engaged in the starting launch in production, being one of the Renault divisions. The industrial release of the first generation of Nissan Almera N16 began since 2000 and continued until 2003, when the model restyling was held.

These inexpensive I. practical cars were created on the N16 platform, which was used in design Nissan Primera. P12 and Nissan Almera Tino. On the territory of Russia, the Nissan Almer Classic N16 car officially began to import since 2006 and was sold until 2013.

After some time, the assembly in Russia of the third generation of Nissan Almera Classic, which had the G15 index had been established. The car is still produced at the factory in Togliatti.

Nissan Almera Classic G15 was created at the symbiosis of two platforms - L90 from Renault Logan. And L11K from Nissan. The video presented is shown the interior and exterior of the car. The exterior is taken from L11K - Japanese Nissan Bluebird Sylphy second generation. The car has a presentable European look and is very quickly selling. Despite the fact that during 2013, 20 thousand cars were issued, and since 2014 it produces about 50 thousand during the year, the demand for this model is very high and exceeds the supply.

Lubricants for Nissan

What engine oil is required to use the G15 and N16 classic for Nissan Almer so that its replacement affects the motor operation only positively? The fact is that each of these cars has its own engine. For example, in Nissan Almera Classic H16 facilities QG15DE (1.5 liters, 98 liters) or QG18DE (1.8 l, 116 l.). Nissan Almera G15 is equipped with K4M from Renault, 1.6 liters, 16 valves, 102 liters. from. This is the only engine that the machine is completed. russian assembly. All three engines - 4-cylinder, have 16 valves.

Nissan Almera 2013 release

What kind of oil is better pouring in Nissan Almer G15? Motor oil with such characteristics should be poured: SAE should be 5W30, during a warm climate, it is allowed to replace the All-season 10W30 or 15W30. The first digit means temperature Range The use, more precisely, the minimum temperature at which the oil does not thicken. What is less than the number, with lower temperatures, the lubricating composition remains liquid.

The second digit is the viscosity and reliability indicator, which forms the engine oil on the surface of the rubbing parts. The digit is more, the more durable and stable, without breaks, the film is formed. In new motors, there is enough viscosity 30. Over time, with a large range, it is desirable to increase the viscosity of the oil to 40-50.

Quality class by API: SL, SM. This means that engine oil with characteristics is intended for multiclap and turbocharged engines. SL class is designed for motors released after 2001, and class SM - for power aggregates After 2004. Lubricants class SM better quality and wear-resistant.

Quality class on ASA: AZ / VZ. This means that lubricant is resistant to mechanical degradation and has high operational qualities. Should be applied in highly functional gasoline engines and has increased intervals between shifts.

Nissan Almera 2000 release

What engine oil is required to use for Nissan Almer Classic and N16? In the engine should be pouring a lubricant with SAE the same characteristics - 5W30, in the cold winter it should be used 0W30, with a warm climate, it is allowed to replace the all-season 10W30 or 15W30.

According to the API standard, there are more modest characteristics, SG, SH, SJ. These lubricants are designed for earlier release motors - since 1996 and later. Lubricants with such parameters have good resistance to the formation of precipitation and nagar, as well as are able to maintain their properties at low temperatures. Quality class on ASA: 96-A2. These are the lubricants of the standard level.

The output is as follows: Since the K4M engine is more modern, compared to QG15DE and QG18DE, the requirements for lubricating composition are much more harsh. That is, lubricants intended for K4M can be successfully used for earlier release motors, since their characteristics are better. On the video presented on the Internet, it is available to decipher the labeling labels.

The procedure for replacing the lubrication

What amount of lubricating makes a replacement in Nissan Almer Classic G15? By technical conditions, We need a volume of 4.8 liters of oil. It is best to use the original Nissan 5W30. Replacing lubricating fluid in Nissan Almera Classic N16 is performed if there is 2.7 liters of lubricant in the engine volume of 1.5 liters. This is a passport, and in practice it is necessary to lubricate a little more, up to 3 liters.

After which mileage is required to replace the lubricant? For Nissan Almera G15 Passport Mileage - 10,000 km for synthetics. Semi-synthetic oil It is required to change every 6000 km. In practice, given the Russian conditions of operation and the quality of fuel, replacing the synthetic lubrication fluid should be carried out after 7-8 thousand, and semi-synthetics - after 5000 km of run. This will guarantee an excellent motor condition.

In Nissan. Almera Classic. N16 It is supposed to change the lubricant every 15,000 km of run. But for this car, it is best to carry out a procedure twice as often as indicated above. The order in which the lubricant is replaced, for both cars almost the same.

Before replacing, it is required to prepare: the tank where the waste oil will be merged, a set of wrench keys, a survey for an oil filter or a key with a very wide grip, a rag and a brush, a lubricant in the required quantity, as well as a new original oil filter from Nissan and a new copper gasket for drain plug.

1. Car visits on watching pit Or on the overpass, the engine is heated. On some video, the car is raised on the lift, but it is the worst option, because in the raised state it is impossible to get to the hood of the car, and it will be necessary to lower it, then raise.
2. Rises hood and unscrewed flashing plugWhere the lubricant will be poured soon.
3. Under the car, in the engine crankcase, a couple of revolutions is unscrewed drain plug. Before that, it is necessary to clean the surface from dirt. Capacity is substituted, the plug quickly twisted, freeing the drain hole. It is necessary to be careful that the hot fluid does not hit the hands.
4. It takes some time to wait until all the lubricant follows from the hole. Is there some more good advice - To completely remove the remnants of lubrication from the Carter, you need to take a large syringe and put on it a thin hose, running it to the bottom of the Carter. From there, it will be possible to reach another 200-300 ml of the most dirty, spent lubrication fluid.
5. After the entire lubricating composition is found, the drain plug with the new copper gasket is spinning on its seat.
6. Next, unscrewed by the film by the old filter. Required again to substitute the capacity, because some kind of lubricant will flow from the mounting hole and from the filter.
7. The new filter is poured lubricant, a little more than half of the volume, and the oil is lubricated with a rubber gasket. New filter Spins in the installation hole, while tightening it too much.
8. A new lubricating composition is poured into the filling neck in the required quantity indicated above for each engine. Periodically, the level is checked by a dipstick until it reaches the middle between the minimum and maximum.
9. The engine starts and works for a few minutes so that the lubricant uniformly filled the entire lubricant. Oil pressure light should go out. After that, the lubricant level is checked again. If necessary, slightly fill.

On the video presented on the Internet, you can see the process of replacing the lubricant clearly. The procedure is simple, even a novice driver will cope with it. Now the car can be operated until the next replacement.

History model Row Almera from Nissan begins since 1995 with the release of the first generation of the car. Almer N15 was produced specifically for the European market and quickly occupied a vacant niche among budget cars C-class. The 15th model series was designed to oust outdated Nissan Sunny and, according to its own data, Nissan Pulsar repeated. Popularity to the car came for its highest quality assembly and excellent driving performance. All this was complemented by a pleasant price and a comfortable interior, thanks to which the novelty was perfectly fit into a competitive struggle on the market on a par with Honda Civic, Skoda Octavia, Mitsubishi Lancer, Toyota Corolla and Opel Astra.

Belonging to the category "Golf" was confirmed by the installation under the hood of ordinary rank fours to 2000. So, the first Almera was commissioned petrol aggregates with a working volume of 1.4 and 1.6 liters, as well as one 2-liter diesel enginewhich soon acquired a gasoline analogue. The power of the installations ranged from 87 to 143 hp, at the same time they were unpretentious to oil. About how oil was flooded in engines and how much, you can learn further in the article. Generation N15 was produced in 2 stages: from 1995 to 1998 and from 1998 to 2000. Basically, the version was distinguished by changes in appearance.

In 2000, the 15th almers took place in the N16 generation. Serial production lasted until 2006 and provided for the release of the model in sedan and hatchback bodies for 3 and 5 doors. The first update passed in 2003, after which the car received new bumper, New headlights and replenishment of the engine line 1.5-liter diesel. Gasoline modifications included versions of 1.5, 1.8 liters, as well as turbodiesel with a volume of 2.2 liters. FROM automatic transmission worked only motor 1.8, and everyone else got mechanical boxes Transmissions.

Generation N15 (1995 - 2000)

Nissan GA16DE 1.6 l. 99 hp

• Oil types (viscosity): 5W-30, 5W-40, 10W-30, 10W-40
• How many oil liters in the engine (total volume): 3.2 liters.

Engine Nissan SR20DE / DET / VE / VET 2.0 l. 143 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-20, 5W-30, 5W-40, 5W-50, 10W-30, 10W-40, 10W-50, 10W-60, 15W-40, 15W-50, 20W-20
• How many oil liters in the engine (total volume): 3.4 liters.
• Oil consumption per 1000 km.: Up to 500 ml.
• When to change the oil: 7500-15000