Sign of spikes in all glass. How to correctly install the spike sign on the rear window of the car according to traffic rules, according to GOST: placement rules. How to make a silence sign yourself: GOST sizes, colored and black and white templates for printing and coloring. What is punished

In the cold period of the year, taking into account our climate, motorists are absolutely necessary. One option is studded that requires the presence of the provided "spikes" sign on the rear window. However, not everyone installs the necessary symbol, let's look at how wrong they are, and what it threatens.

What is the sign

This sign refers to the identification and is designed to prevent drivers of machines moving from behind, so that those observed the distance, since the studded tires significantly reduces the car during emergency stop.

Plus, it is advisable not to not forget that these spikes can simply fly out of the wheels and damage the rest of the participants road. It looks like this sign in the following way: the letter "sh", inscribed in the bordered red stripe a white triangle.

What does the law say about it

From a legal point of view, this question is quite thin, because nowhere else is not forbidden to ride without it, and therefore should not be a fine for the lack of sign "spikes". But a legally inappropriate driver can gladly be fined for riding without a sign. In this case, they make a reference to Article 12.5 Code 1 of the Code administrative offenses:

"Article 12.5. Transportation of a vehicle in the presence of faults or conditions in which the operation of vehicles is prohibited.

1. Vehicle management in the presence of faults or conditions under which, in accordance with the main provisions for the access of vehicles for the operation and responsibilities of officers to ensure road safety, the vehicle operation is prohibited, with the exception of faults and conditions specified in parts 2-7 of this article - Warning or imposition of an administrative fine in the amount of five hundred rubles. "

The "spikes" sign is located in the specified, but it only establishes the need to comply with these rules, but nothing prohibits. At the same time, this article refers to a note to the rules of the road.

Claimed Sign "Spikes" by car

And, therefore, can only be applied to such violations of traffic ruleswhich are indicated in this note, so the penalty for the "spikes" sign is not registered there. Therefore, if you have discharged a fine, you can challenge it in court.

So there is no danger?

Nevertheless, if the question "Does the" Spike? "Need a sign, you decide to answer negatively, do not rush. There are several weighty nuances. Without this sign, you simply can not. After all, as we remember, the result of the inspection is precisely tolerance.

Therefore, if you arrived on a studded car, and there is no sign, you will not get the desired coupon. In addition, formally, the traffic police officer has full reasons for stopping and checking your car outside of stationary posts, because it has reason to assume that the inspection was carried out with violations.

It is also worth considering the fact that if you were drunk in you, and at the same time they moved on a studded machine without identifying symbol, the likelihood is that you are also recognized as guilty, and the accident will become mutual. It turns out quite harsh punishment for you for the lack of cheap stickers.

Installing the "Spike" sign

Consider where it should be glued. Turn the "Spikes" sign to the car in such a way that it is good noticeable from a distance of 20 meters. If, then you need to glue from the outside, if not, then it is possible inside.

Conclusion

As a result, it can be concluded that you do not formally have for riding a car with studded rubber without installing the "spikes" sign, but since there are different, not less unpleasant consequences His absence, still better not to skip and acquire the required sign.

It is not difficult to guess what the sign sh is on the car. In a nutshell, this is a pointer to equip wheels with spikes. In addition to the traffic rules, there is an item that states that the sign in question is provided to be installed on a vehicle equipped with studded rubber. He notifies drivers behind the reserving machines about the need to hold the minimum distance due to the shortened braking.

The sign is made in the form of a triangle with the boding of a red kolator, the center of which is made with the application of the letter W black. Any side is made of at least 20 cm long, and the outline of the kayma is taken in proportion of 1/10 from this size.

When and how is it used?

Which means the S sign on the car and its purpose will look further. He glues on rear glass Tools having spike tires. The item at number 8 of the main nominations on the admission of vehicles to the exit and duties of officials to preserve traffic safety, it states that transport with wheels equipped with spikes is obliged to be equipped with a similar sign.

As a penalty, an administrative penalty in the amount of five hundred rubles is provided. However, the main set of traffic rules does not include the provision on the lack of "sh", as a technical or other violation that affects safety.

Article on the topic: "".

Is it necessary to use?

In traffic rules, it is specifically substantiated that the driver of the car before starting the movement is obliged to check and provide a good technical means of movement. Movement is prohibited by the presence of the following defects:

• Malfunctions in the steering and brake system;
• Non-working headlights and overall lights;
• An inactive glasses cleaner from the driver's side.

Examples

It can be clearly found out how the set of "sh" sign may affect the court decision in the event of an accident, available in the following examples.

The driver in Izhevsk was inattentively knocked ahead of the driving car, which was equipped with studded rubber. The attribute "sh" was not on it. As a result, an explicit intruder focused on the lack of a warning sign on a shortened braking path. The guilty of the first car was recognized by the court.

A similar situation occurred in the capital during frosts. The driver of "Lada" unexpectedly slowed down before the cat's running road. Riding the back of Volga crashed into the back of the vase. Well-counted in knowledge of traffic rules, the Gaza driver was able to prove that the accident was provoked by the driver of the Zhiguli, since the braking path was calculated, implying the presence of non-studded rubber, due to the lack of a "sh" sign. The court agreed with his opinion and recognized the driver of the driver ahead of the car.

Features

In case of passage technical inspection in winter A car equipped with spiked tires may not be given in the absence of a sign under consideration. Drivers of vehicles having experience at the wheel of less than 2 years can additionally recommend the Winter Sign Sticker "!".

If the traffic police inspector still discharges the penalty for the lack of the "sh" attribute, the driver has the right to appeal his decision in court. However, you will have to spend a lot of time and forces in campaigns on various instances. The experienced chauffs advise not to be lazy and acquired this information sticker.

Judging by the reviews of drivers, the spikes on the wheels do not always contribute to the rapid stop. The weight of the car and the state of the road play a decisive role. However, on an obvious ice, the studded rubber will stop much faster.

Motorists, knowing that indicates the sign sh by car, should think about the adequacy of the proper distance. At the same time, the driver of the affected car spikes, also should not lose vigilance. It must be remembered that compliance with traffic rules at any time of the year allows you to protect yourself and others.

This article will be useful for motorists, since in it we will talk about the sign that should be glued under the "exercise" of studded rubber.

Today we will talk about controversial issues that arise about the "spikes" sign. How to establish a sign and is there a punishment for his absence? About this and many other things further in the article.

What does the spike sign for the car look like, what is his meaning?

It would seem that everyone who surrendered to the rights and read the traffic police, probably need to know about such a sign as "spikes." But as practice shows, familiar with such a few, and the meaning of this sign remains a mystery for the majority.

• It looks like this sign as follows: a triangle with an edging of red, inside which there is a letter "sh", depicted in black.
• The significance of this sign is completely unknown reasons, and at the same time he carries crucial information For all drivers.
• The identification mark does not just "say" that you are the owner of rubber with spikes, it informs about possible danger in connection with this fact.

• This type of rubber significantly reduces the brake path of the car, therefore, all the cars that will move behind him should be aware of this and in accordance with this correctly count their distance. In case of emergency braking, transportation with such a type of rubber will stop much faster than others that are equipped with other rubber and with ignorance of this fact it may easily occur by an accident.
• There is another fact that the aforementioned sign warns. The thing is that the quality of studded rubber can be completely different. In this regard, when spikes are flying out from under such wheels, they are completely real and carry a threat to all those who are moving behind such a car.

How to establish a spike sign on the rear window of the car according to traffic rules, according to GOST: location scheme, description, photo

This sign must be attached exclusively according to the established rules and rules. Since its establishment will not give the desired resultSimply put, the sign will not be able to perform its function - to inform about the danger in connection with the studded rubber.

• First you need to say that this sign can be bought in a specialized store, however, sometimes, no matter how strange it sounds, these signs are not available. The thing is that due to a huge stir, the studded rubber drivers began to massively buy a sign in order not to disturb the traffic rules.
• In this case, you can make a sign yourself, but it will have to fully comply with traffic rules and GOST. About this a little later we will talk more.
• And now a few words about proper installation Sign of spikes. There is no one's right place to install this sign. But it is quite logical that it is not established for himself, but for other drivers, in particular for those who are traveling for a variable rubber.

• In connection with this, the sign is installed only in the rear of the vehicle. Moreover, it should be located on the car in such a way that it was clearly visible at a distance of 20 m. Absolutely all the cars that go beyond you.
• Specialists advise to mount the sign on the rear window, in the upper part of it. At the same time it doesn't matter what role you glue it.
• When choosing a location of the sign, the driver must be guided by his personal feelings. The sign should not close visibility, as well as the visibility of those who go after him.
• Also completely unimportant inside the car or outside will be attached the "spikes" sign. It is also done at the discretion of the driver. But if vehicle you have toned windows, then preference should be given outside Auto.

Is it possible to glue the spike sign on the bumper?

It should be understood that nowhere is not clearly indicated, in which place is at what height, etc. Must be attached this sign. And, consequently, you can mount it not only on the glass from behind your car.

• Really most often, such a sign can be seen on the back of the car, in particular on the glass on the right or on the left.
• However, you can attach it to the body of your car.
• Regarding the bumper there are no restrictions either. If you wish to arrange a sign in this place, please.

• The only thing you need to remember during the adhesive of the sign is about its visibility for other participants in the movement.
• If all the rules are complied with this installation, no one can prohibit you glue identifying sign.

Spike sign: GOST dimensions, sign requirements

Each sign has its own sizes and requirements for its " appearance" The "spike" sign is no exception.

If you buy a sign in a specialized store, then it is clear that you have nothing to worry about. However, if you decide to make a sign on your own, then you need to familiarize yourself with the requirements for it.

• It's easy to cut out of the paper an arbitrary triangle and stick the letter "sh" cannot be in it, since this application will be considered incorrect.
• Sign "Spikes" is an equilateral triangle necessarily white color.
• At the same time, the entire triangle must be in the brine of red, and the letter "W" of black should be depicted in it.
• All sides of the triangle must be at least 20 cm, and the width of the red edging must correspond 1/10 of it.
• That's all. The requirements for the sign are not so serious, so if you wish it easily, it can be done independently.

How to make a spike sign: Colored and black and white templates for printing and coloring

Of course, make a sign on your own not so and difficult. For this, just need to be used for paper, pencil, line, scissors and markers or pencils. Further, it's small, measure the size you need, draw a triangle with edging, cut it, deactivate it and secure on the car.

However, those lucky who have a printer and those who are not too lazy to go somewhere and print a photo, there is a much easier-described output.

• If you have a color printer you can simply print yourself ready to use sign
• If the printer is black and white, then some creative work still have to do. Print the sign and deseerate it in accordance with GOST, that is, the triangle edging is made red, and the letter "sh" is needed (if only its edging) is printed in black
• So you will save time and money

Shipping sign: required or not?

A similar sign can be seen far from every machine, even taking into account the fact that most vehicles still have studded rubber. In this regard, many may think about the fact that the sign is optional, however, it is not.

Important: All cars that have this species tires should be obligatory Have a corresponding identification mark. It is written by B. 8 point of basic provisions for the access of vehicles to operation.

• Moreover, traffic rules, namely, paragraph 2.3.1 obliges the driver of the car before the operation of the machine and during the immediate ride to provide a good condition.
• And if you also consider the fact that since April last year the lack of such a sign equates to the machine malfunction, it is logical to assume that the sign is mandatory for all cars, with a similar type of rubber
• In the absence of such a sign, the movement of the machine is prohibited.

What is the punishment, fine, if there is no spike sign?

Since this identification mark is mandatory for all machines that have studded rubber, the punishment for violation of this obligation, of course, should be. And it is.

• Responsibility for the lack of sign is provided for again from April last year.
• Responsibility is clearly governed by 1 part of Article 12.5 of the Administrative Code.
• The article we are talking about the management of the car in the event of a malfunction. As mentioned earlier, the changes that were listed into legislation provide that the lack of a "spike" sign is nothing more than a malfunction.
• If you violate this position, the traffic police officer must attract you to justice, which will be expressed in a warning or a fine. The size of the fine is 500 p.

Do you need to shoot a spike sign in the summer?

Nowhere is clearly stated that you are obliged to shoot this sign in the summer, which means that no punishment for the fact that it is installed on your car at this time will not be.

• It is important to remember, stick the sign you must exactly at the same time when you change the rubber on the studded
• If you explore the law, then summer tires can not be used by any machines from December to February, that is, in winter, which is quite logical
• FROM winter rubber Everything is also logical. She cannot be "shod" in the summer months, that is, June, July and August

• For the remaining months, the driver himself decides, with what rubber it is better to ride and, accordingly, it repels, you need a sign or not
• At the same time, the location of the sign on the car in the summer does not bear any punishment
• Moreover, most drivers do not remove this sign, especially it concerns those who do not sign on suction cups or magnet, but glued to the glass

Sitting behind the wheel of the car, you must understand that you are with a potential danger, and your ignorance of the law, in no case relieves you from liability for a criminal act. Read the laws, keep them, in which case you will never have any problems with representatives of the law.

Video: Spike sign - obligatory or not? Where to glue, sizes, gost

Changes in the rules of the road in the Russian Federation occur regularly and relate to various aspects. Including mandatory information symbols. The spikes sign refers to the category of warning identification. The attitude to the need for its presence on the vehicle has undergone some changes about which motorists need to know.

Spike sign required or not, rules 2017-2018

Our country is included in the Customs Union with the established Technical Regulations. According to him, in different times For a year, the owner of the car is obliged to change rubber with a summer on winter and back. The studded wheels should be installed by motorists during the cold season, when the road surface can be glaced.

Since their installation changes driving performanceThe order No. 333 was introduced into traffic rules, which entered into force on 04.04.2017. It says that for the lack of a spike sign, the vehicle owner is made a warning and imposes a fine of 500 rubles. Thus, the installation of the sign becomes necessary, and avoid punishment in the case of its absence it will not work. If an accident occurs when in front of a moving car without a spike sign enter another vehicle, both drivers are responsible.

Where to glue the spike sign

Item 8 of the main provisions describes in detail how the sign looks like. This is a white triangle with equal sides and a large black letter W in the middle; All over the perimeter of the triangle passes a wide red edging band. Strict regulations on where to place a sign is not. The same 8 item prescribes to establish it from behind the car. That is, it can be a trunk door or its lid, the back cover of the body, bumper, awning or rear window. But on what side of the glass place a sign, the motorist should think. If the rear window of the car is transparent, then the external, and the inner side is equally suited. If the glass is toned, then only its outer surface is suitable.

Spike sign: GOST dimensions, is it possible to print yourself

The size of the spike sign matters. According to the rules, it must be visible from behind the coming cars from a distance of 20 meters. Therefore, GOST installed its recommended dimensions: the side of the triangle should be at least 20 cm, and the red edging band is 10% of its length; The letter Ш fits in the middle, large, proportionally. Many motorists are wondering if it is possible to make the spike sign?

The rules do not provide for any restrictions on this. The main thing is not to make it less recommended, because the small sign of the inspector can identify with its absence.

• not ordinary, but a photographic paper with a density of 120 to 150 g / m² is not suitable for printing the symbol;
• use the color printer in order not to paint the red kaym manually;
• it is important to remember which the size of the sign should be (a small tip: the width of the A4 sheet is 21 cm, and the length of the length of the triangle is 20 cm, that is, the symbol will take almost all the sheet space).

When you need to shoot a spike sign, is it necessary to clean it in the summer?

Some car owners, sticking the spike sign once, prefer it later not to take off and drive with him all year round. There is no direct ban on the "wearing" of the sign in the summer period, this is not considered a violation and does not provide for the imposition of a fine.

The main thing is to glue it on time, together with the setting of the studded wheels. Sometimes motorists sticker sign prefer its installation on special suction cups, arguing their choice because the sign is painting maneuverability. On this score, there can be no one-minded opinion, each driver makes his choice independently.

We draw conclusions: the spike sign is mandatory to use, acquiring or manufacturing it independently important to take into account the size, it is necessary to place it in the back of the car.

"Sign of spikes - where to glue according to the rules?", "Do I need to shoot a spike sign in the summer?", Do I need this sign at all? " - Similar questions are found not only from novice car enthusiasts, but also from drivers with experience.

And although it would seem - what can happen in the absence of a prevention of studded rubber? But in the traffic police consider otherwise.

Why do you need a spike sign

The red triangle with the letter "sh" is often found on the rear window of the car, especially in winter time.

He means that studded tires are installed in front.

This allows you to prevent other participants in the movement of 2 nuances:

1. Braking on such rubber happens faster, that is, the braking path is shorter than that of neighboring participants. In other words, traveling behind should be respected if he has ordinary rubber.
2. That spike can fly and damage someone else's car.

It is worth noting: This sign appeared in times when the spikes were installed not on all cars.

It would seem that today everything in this rubber is "converted" everything, and the need for a sticker disappeared, but it is not.

The spikes sign is obligatory or not

Despite the fact that the studded tires ceased to be exotic and meets almost everyone, especially in summer, the sign itself paste about half of the car owners.

However, this violates the "Basic provisions for the admission of TC to operate", or rather, paragraph 8: the "spikes" sign should be installed on a car with studded rubber.

Paragraph 2.3.1 of the traffic rules is also violated, according to which the driver is obliged to ensure that the state of the car corresponds to "general provisions". Since 2018, the lack of a sticker is the reason for the ban on the use of the car.

Take into account: If in the summer the driver is "converted" into the untapped rubber, the sign will have to be removed.

Sizes of spikes in the GOST

Like most stickers, this will not break the owner: buying in any auto shop will cost 20-200 rubles. They can be double sided or on the suction cup.

The sticker is not necessary to buy ready - it can be done independently or print, observing the basic requirements of the GOST.

GOST presents the following rules To the sign:

1. It must be an equilateral triangle with rounded edges.
2. The length of each side is at least 20 cm;

Note: Requirements for the sizes of the sign should be taken into account when purchasing it - if it is less than the stated size, it will be considered that it is not.

3. The red edging should be at least 2 cm or from 10% of the length of the sides.
4. The letter "sh" should be black, the main background is white.
5. It is better to choose more dense paper so that the sign serves longer.
6. The black and white version must be painted: edging needs to be done quite bright, attracting attention.

Shipping sign where to glue according to the rules

He must hang on the car behind and be visible to the other participants in the movement - this is the only requirement of the rules.

In addition, it is necessary to comply with the following conditions:

1. It is possible to fasten it on the glass from the inside, outside (if the glass is tinted), on the awning, body, bumper or any other place. It is advisable to choose a place higher so that the sticker is visible to everyone. You don't need to stick the sign from the front - on the drivers going ahead, the presence of spikes does not affect anyone.
2. The rest of the drivers must see the sticker, being up to 20 meters away.

Should be taken into account: If the sign is smaller or is not seen by the participants in the movement, the traffic police officers consider that it is not at all.

Penalty for the lack of spike sign

Not so long ago, the penalty for the lack of sign was 100 rubles, but since 2018, the amount increased to 500.

This is indicated in 1 part 1 of Article 12.5 of the Code of Administrative Offenses (CACAP): such a fine is punishable by any use of the car in the presence of faults or prohibiting these conditions.

No spike warning are included in this list.

It is worth noting: In addition to the penalty, a warning may be imposed.

When passing inspection, it is also necessary to establish a sign, otherwise the car will not meet the operation requirements. However, if at the same time there is a car on an awkward rubber, a sign, on the contrary, will have to be removed.

You can also during the passage of inspection, replace the tires to the immaculated.

Tires with spikes today is difficult to surprise someone, especially in winter. But to warn about their presence of the rest is prerequisite: This will help to avoid problems with other participants in movement and fine for violation of traffic rules.

See the video that explains the need to use the "spikes" sign: