Installing the secret to the car. The secrets from the hijacking - a great way to protect your car. Secret - Reliable protection of the car, principle of operation, installation

the main / Repairs

How to make an anti-theft secret on the car do it yourself

Adaptations against car hijacking can be used completely different. These may be immobilizers, autochegers, GPS trackers, specialized alarms, as well as blocks such as pin or castle secrets.

But before buying a block, it is worth thinking, and whether it is possible to make it yourself. Why overpay, if you independently really really install the anti-theft secret on the wheel or the steering wheel of your car.

It is only worth understanding their schematic device, varieties and installation method.

What applies to the secrets

Consider what is generally a secret, for which it is needed, and how it works. The secret is, first of all, a special device that effectively protects the machine from theft by blocking the steering mechanism, fixing the wheel from movements, as well as by installing a device that simply won't give the machine.

Often, such a device is mounted independently of the car's security system, which attracts auto owners to its use. After all, this is a good anti-theft version as an addition to the security alarm.

Devices can be made with standard buttons, and can be made with microcopters of a mechanical principle of operation, in the form of togglers, sensory sensors and other options.

This "gadget" is used for purpose depending on its design by pressing the programmed or secret manual button that blocks the starter.

Also, the secret of the car from the hijacking can be brought into its functional action using a toggle, which is also disconnected.

In addition, it perfectly prevents the operation of the fuel pump, blocks the hood lock so that the thieves do not scratch and do not stole the parts of the car, because it often happens. By and large, the options for performing such devices are just a mass.

For example, the essence of the secretion for the engine is alone - to provide any ways to the impossibility of starting the aggregate. Often, a certain algorithm of actions is hidden from the thief, which is familiar only by the owner of the car.

Similarly, the principle of protecting the wheel is also valid. The device works in such a way that it blocks not only the movement of the wheel, but also removal, disassembly.

In other words, the thief will not be able to leave on your car or remove the wheel without a special key that can unlock the lock on the anti-theft device.

Of these two examples - secrets on the motor and wheel - it is necessary to select that the electronic devices are more often used for the engine, and mechanical for wheels.

For electrical devices, a secret tamblers are used with a power chain break function when igniting.

Even if you have the keys from the car along with the alarm keychain, the secret device on the engine perfectly cope with its anti-theft task.

Varieties

The secrets are different, their systems and designs are based on completely different principles of work.

Already the use of such equipment is so extensive, constantly developing, replenish the options for new types, which can be written up the simplest classification that reflects the species of anti-theft devices.

So, secret anti-robes are:

  1. Electrical:
    • toggle switch to break the electrocups when igniting the starter;
    • toggle switch to block the power supply of fuel in the engine;
    • toggle switch for ignition lock;
    • and other features.
  2. Electronic:
    • push-button devices that block the start of the machine engine;
    • motion sensors;
    • electroschockers;
    • devices with special codes and passwords.
  3. Mechanical secrets.
    • blocking wheel lock device in the form of a bolt and nut with a unique pattern and a special key with the same pattern print to open the lock;
    • blocks on the steering wheel or door locks;
    • blocking the castle of the hood and trunk;
    • overlap the exhaust pipe;
    • and other options.

On the principle of action or algorithm for the use of the device against theft of the car can be divided into secrets:

  1. With a specific sequence, a combination of a button pressing a button.
  2. Control of the hood lock design.
  3. Closing and opening the device using a code set, password.
  4. Entering code in a specific sequence for standard, as well as using additional buttons.
  5. Tracking the car location using a built-in monitor motion sensor.
  6. Motion sensor, with which you can only start the machine, but do not go on it.
  7. Hinged blocker - mechanical device.
  8. Castle devices with added signal lilac.
  9. Other options that are just a mass.

Benefits electronic options The secret is that they are simply the inability to consider special programs that thieves often use.

And if you attach the anti-theft under the hood in such a place that you know only one, then you can even count on the fact that the hijackers simply will not find it.

How to check the motorcycle to the hijack on the frame number, read here.

Operating principle

Any installed on the unit or some detail of the car protection from the hijack will have its own principle of operation. A factory secret is installed on the engine, which simply closes the electrical circuit, not allowing the necessary spark to work for the engine.

So, if you need to block the work of the starter or, for example, the carburetor, then simply connect the toggle switch to the minus wire in an unnoticed area of \u200b\u200bthe wire.

Make the wires to the buttons on the control panel in the cabin of the machine, where, for example, the headlight corrector or the inclusion of the furnace to manage the secret itself.

If this is done in several places, then you can win enough time while trying to steal your car.

The homemade variant of the anti-theft system can also be on the exhaust pipe, which allows to overlap its internal moves. Suitable such a device inside, where the tube valve is located. You can control the device remotely.

It acts as follows - you can start the machine, the motor starts and it even works for some short time, and then simply stalls.

The spent gases have nowhere to go out, the hijacker is unlikely to immediately guess the blocked valve inside exhaust pipeTherefore, he will decide shortly that the car is faulty and retrieved from the site attempt to make theft.

Additional locks or magnetic latches on the steering wheel or transmission, the wheels all work on the principle of partial and complete immobilization of parts, systems, elements, which also creates a lot of problems with hijackers.

You can also provide a wire system that depart to the carburetor or starter, a special radio protector.

His principle of work is that when approaching him, his work begins - it simply automatically closes the chain without giving the car to start.

The only one perhaps may be inconvenience - this is what will have to carry a transmitter with me, which is part of this system.

Schemes of secrets on the car for installation do it yourself

When the engine is blocked, different algorithms can be used - the so-called "passive" and "active". The first version of the specialists are recognized as the most effective, because it does not allow you to start a car in a de-energized state.

All relay contacts with a passive system algorithm open normally and such locking can still be called HP.

To remove such a blocking, you will need to start the voltage of electricity, then only the relay will switch to the engine.

The algorithm for blocking "Active" is most often attributed to vulnerable systems, because with it without power it is possible to start a motor machine.

Its relay is in position normally-closed (NZ), approximately as contacts in the "Protection" mode of a blocking relay. An example can be seen in Fig. 3, where the ignition blocking scheme and the activation of alarm is shown.

The presence of closed contacts (in fig. Points - 87 and 30) suggests that even in the position of the blocking device, when there is no voltage on the relay winding, then these contacts will be allowed to start the engine, although it will not give to start the starter.

To de-energize the work of the benzonasos, you also need to provide the secretion of the anti-theft system. It is enough to build a relay within the signaling module itself in the communications of the pump feeding.

The principle of operation of the relay is to burst the high-current electrocups that feeds the operation of the electric pump. .

With such schemes, the hijackers will have to be sweat to find the location of the chain break, eliminate it or find the connector from which you need to remove the device, disconnect the necessary wires, find the "masses" in the connectors - and for all this it is necessary to have a family of spans in the forehead so that all this Detect in a short period of time.

It is unlikely that the Warre will want to mess around so long with the car to determine in where the secret is located and how many of them, perhaps, the secret devices can stand several.

How to put

If we make a secret to the secret, for example, for the wheel, then this is a very difficult case - literally jewelry. Not to mention independent manufacture electronic system or radio programs, which can be solely made only in factory conditions.

Therefore, ate you think how to protect the car from the hijacking with your own hands. You will need non-hearth knowledge and practice. To block the wheel you need to take bolts, for example, from an old vase.

A blank is made by three holes that should be placed symmetrically to each other. Thread is made in the holes. Then a large hole is made under the bolt, as threaded.

Then three bolts are stacked in three holes so that they are pretty pressed to the mandrel. However, most of the car owners still prefer to access Tokaryam or other specialists in the manufacture of secrets.

For installation electrical system You need to buy any wireless relay on the radio market, for example, is suitable - Hock-Up, Wait Up.

Such a device is installed in a section of the wire of any chain, but only a plus, if you consider regular wires. All wires from the relay are displayed on the control panel into the cabin car.

Suppose a miniature button can be placed under the cladding of the ignition lock or still hide somewhere in the panel so that only you know where it is.

According to the instructions is set electronic device. The instruction is usually always attached to the product.

What is better to choose from devices

Choosing that it is to put in addition to your anti-theft system of auto, you can prefer either the option mechanical systemor electrotok connected - it all depends on you.

Experts claim, for example, that many middle-class motorists prefer mechanics and "protect" wheels, steering wheel or pedals. Often it is motivated by the fact that the electronics often brings, and the mechanics - much less often fails.

Also popular and rejuvenation of the relay for the breaks of electrical caps. Therefore, immobilizers or factory secrets that are already equipped with almost all cars are so popular today.

You can check the car to the hijack and arrest using this information.

The main task of the device is the extension of the time and complication of the attacker of the unlawful action - theft. On the one hand, the secret on the car from the hijacking, made by their own hands, does not guarantee a 100% result, but on the other hand, the experienced thieves buy all the options for anticounts of the factory option in advance to practice hacking. The secrets allow you to prevent not only theft of wheels, license plates and other external removable parts of the car, but also the hijacking machine.

You may also be interested in the article of our author, in which he talks about the peculiarities.

The segments on the wheels of the machine are metal bolts and nuts of different shapes. Details preventing theft of license plates, in form and the principle of action resemble automotive. But on the hood and the engine prefer to put electronic adaptations of varying degrees of complexity.

How to make it yourself

To the one who understands the details of the car's device, it will not be difficult to figure out how you can protect it from the encroachment. However, if there is no own ideas, you will help more experienced motorists And car service masters.

Passive algorithm

From the most popular methods, it is possible to distinguish those that are easy to implement, but most effective (if done correctly):

  1. A wire having a minus polarity, you need to break and connect with the wires of the toggle. The toggle wires are connected to the carburetor or starter wires. Tumbler must be hidden in reliable placeknown only to you.
  2. The remote overlap of the exhaust pipe valve, which contributes to the cessation of the engine operation within a few minutes after the establishment of the car.
  3. Installing a magnetic latch blocking a transmission or steering wheel.
  4. A proven reliable method is the addition of the relay scheme, with the result that you will have a system with self-grade. But the implementation of this method is possible in the presence of a circuit, which when starting the engine, has a voltage of 12V. After adding the relay, you will need to clamp the secret button for a couple of seconds when the engine is started. But when it is turned off, the chain will open itself.

Active algorithm

You can add active protection to the passive secret, which implies an action directed at the most intruder. So, when the circuit is blurred without pressing the secret button, another chain will automatically be closed. As a result, the siren attached to the steering wheel or the gearbox will be, there is a small electrical discharge (by the type of electrosker) or tear gas. In this case, it is important not to overdo it and not harm the criminal so that your actions cannot be qualified as an unlawful act.

Installation rules

Any secret to the car from the hijacking and theft of parts should be selected according to the characteristics of the car. For example, the rupture of the chain on the carburetor car is useless - the machine starts with a closure directly.

Be sure to take into account such moments.

  1. The toggle switch must be in a hidden place, which will allow it to concern it without unnecessary unusual movements. This will help if the car is observed.
  2. In the amateur secret, there must be a service function that will not allow you to detect it when servicing the car (one hundred, washing).
  3. For better results You need to combine the secret with the alarm, but they should work in parallel, independently of each other. So to speak, act as an insurer.
  4. A button or other object that includes an antihagon, you need to mask thoroughly. It will be suitable for any place in which an attacker will not come to mind to look for her first.

The secret button is a modern development for protecting the vehicle from theft. In the event of a breakdown, the device installed in a certain place is triggered and produces start locking power aggregate, transmissions and other components. When installing a "secret" on a car from theft, you need to comply with certain rules, as well as safety equipment.

[Hide]

Principle of operation "Secret"

When you try to start the motor, the bus owner is on the key, after which the magnetic key applies and enters the secret code. Either the start of the power unit can be carried out by turning an additional key. If the criminal managed to crack the anti-theft system and the alarm siren does not work, he will have to spend time searching for a button and its deactivation. Otherwise, it will not be able to start the engine, as and steal the car.

Using the example of a branded secret castle, you learn about the principle of action of the device from the roller, shot by the Axius-Auto channel.

Consider the principle of operation on the example of the simplest blocker:

  1. After entering the password car owner to protect occurs.
  2. If the criminal can get into the car's salon and try to start the engine, the power unit will start functioning, but will stall in a few minutes so that the attacker cannot go far from the crime scene.
  3. If the cracker enters the password incorrectly several times, the full blocking of all systems will occur.
  4. If the criminal is trying to unlock the nodes and leave by car, the systems will publish sound signalswho must scare the attacker.

Varieties "Secret"

You can find several types of blocks on sale, consider in detail each of them.

By mechanism

By the operation mechanism, secret blocks are divided into mechanical and electronic.

Electronic

Electronic devices can be different:

  • push-button systems designed to block a motor motor start;
  • motion controllers used to determine activity;
  • electrics, such devices beat a cracker, if he tries to sip the car;
  • devices with passwords and codes designed to disconnect the secret button.

Roman Petrov in the video spoke about the programming of the automotive "Secret".

Mechanical

Mechanical secrecy buttons are divided into purposes:

  1. The button can be used to lock the wheels. Such a device is made in the form of a lock with a bolt and nut, has a unique drawing and a special key on which the imprint is located. It is used to open the block.
  2. Devices for installation on steering wheel or door locks.
  3. Blocks to prevent the opening of the luggage compartment locks and the hood.
  4. Devices used to lock the exhaust pipe.

According to the principle of action

Blocks are also divided by the principle of operation:

  1. With a sequence specified by the developer. Disconnection is made by entering the combinations with the button.
  2. To protect the lock of the engine compartment.
  3. Devices that ensure activation and deactivation of the block with a password.
  4. Disabling and turning on the device is possible by entering a password in a specific sequence for regular and installed additionally togglers.
  5. A variant of using the secret controller of the movement is possible. It is activated with unauthorized penetration into the interior of the machine and works by transferring the coordinates about the location of the car.
  6. There are special motion controllers that block the engine with an unauthorized start. They do not track the location of the car, but also do not allow the criminal on it to move.
  7. Hinged devices related to the type of mechanical devices.
  8. Special locks equipped with an additive lilac.

On the wheels

The secret buttons are conditionally divided into three types and differ by profile:

  1. Completed in the form of an asymmetric polygon. These devices are considered among specialists the simplest in design option. The number of faces can be different - from 8 to 40 pieces, their number is directly proportional to the degree of protection. The profile is installed on the outer and inner screws. It should be noted that the blocks with 30 and 40 faces are released only with an internal profile.
  2. Devices with curly profile. Such blocks are complex in design, but this type of blocks ensures reliable protection of the wheels. The profile element itself is a combination of various curvature of lines. In the absence of a key, the cracker will not be able to dismantle the bolt and unlock the wheels.
  3. Dry devices. In the head of such a screw there are holes that differ in between themselves in depth, size. They can be placed in chaotic order.

You can find blockers on sale, which are a combination of holes and curly devices. Such devices are most reliable as possible.

On the feasibility of using secret locks for the wheels and ways to remove them learn from the video, which published the canal of the hijacking. No - protection against theft.

On the hood

The block for the hood lock is a device used as preventing theft of the main components of the machine located in the engine compartment. Designed to protect the boost space from the intervention of intruders. Aside from the key device back from the standard cable, an additional block is installed. At the other end, for example, in bottom box, placed lock with key. If the second device is closed, open the hood will not work using a regular handle.

How the "secret" works for the hood to learn from the roller who published Leonid Kovalenok.

On the engine

Also called Immobilizer. This is a simple electronic device designed to prevent the starting of the power unit. It is considered one of the most reliable types of devices designed to protect the car from the hijacking, since IMMO bypass is not so simple. The main advantage of the engine blocker is its secrecy, only the owner of the vehicle will be able to unlock the power unit.

To ensure hidden protection, any button in the auto cabin can be used, if necessary, an additional toggle switch is displayed. But the landscape of the device is reduced. If you put a separate button, it can be placed at any point of the vehicle. The main thing is that the car owner can reach it from the driver's seat.

The principle of the operation of such a block is in the breaking of the electrocups of the fuel or blocking of the starter device. The starter is unlocked, and the chains will be restored if the driver enters the password or clicks on the button. In case of incorrect code input, an anti-theft device will be activated several times to work in enhanced mode.

On license plate

Especially for the protection of the number of thefts uses license plates. According to the principle of operation, these devices are similar to the "Secret" for the wheels. Such devices are made in the form of screws whose heads are applied. To disable protection, the key will need. It is unique and comes complete to the bolt, it is impossible to pick it up.

The package of blocks includes:

  • four screws;
  • nuts;
  • washers;
  • special troops for mounting;
  • key.

User Ruslan Yunyev in the video demonstrated the installation procedure for installing a secret lock on the machine number.

Piopatron

This option is the most radical. The cost of the pyropatron is quite high, but its use can lead to negative consequences for the machine salon. If the offender will try to catch a car, an activation of a device with a caustic gas will be activated. His spraying on the salon will lead to the fact that the hacker will not be able to finish its business. But at the same time the smell of the substance can remain for a long time.

How to install a "secret"

Consider an example of mounting the block for the wheels. In the process of implementing this task, working bolts will be required, the use of elements from the zhiguli is allowed.

How is the installation of "Secret" from the hijacking on a car:

  1. With the help of a blank, you need to make three holes, they must be symmetrically relative to each other. In each of them carved.
  2. Another hole is performed by a larger diameter, it also needs to make a thread. Note that it is not so easy to fulfill this procedure, so specialists recommend using Tokare services.
  3. Installing screws in drilled holes, they must be tight pressed to the rim.
  4. To ensure consistently pressing the button, you need to make an electrical system. To implement this task, a wireless relay will be required, it can be bought on the radio market. It is allowed to use the "Secret" of any types, such as HOCK-UP.
  5. The installation of the relay is carried out on any plot of electrocups into a cut. Be sure to install is made positive output, consider the nuances of the standard posting. All electrocups from the device should be displayed on the central console or in any place of the cabin. You can use a hidden option, for example, in a glide or on the side of dashboard.
  6. In accordance with the instruction coming in the kit, the electronic component is installed. If problems arose at this stage, we recommend contacting the electrician.

Konstantin Chats in his video spoke about the development and connection of the secret button in the car.

If you want to put the block against the hijacking, we recommend considering such advice to the specialists:

  1. Installation of switches is carried out in the cabin, you need to select a hidden place. Tumblar contacts are connected to the outputs of a carburetor or starter device depending on the type of device. Switch must be connected to a negative chain. Possible option to connect wiring to regular buttons, for example, optical control, stove, heated rear glass etc. If you use multiple switches, you will greatly win the time.
  2. You can overlap the silencer valve. This will allow blocking the power unit a few minutes after its unauthorized start. As a result of the fact that the output exhaust gases Macked, the engine is incorrect. The criminal can create a car malfunction. There is a possibility that the hacker will then hide off the crime scene.
  3. One of simple options - Installation of a magnetic latch intended for blocking the transmission or steering wheel.
  4. Installing the finished immobilizer is possible, the block is purchased in the store. Installation is carried out on a plot of electrocups that are used for starting and ensuring the correct operation of the machine's motor.
  5. If you have a radio transmitter, install it in a hidden way to a starter device or carburetor. This will ensure the closure of the chain when the attacker tries to hack cars.

Homemade "Secret"

You can make a "secret" on your own, according to the example of creating a device for blocking the starter and the ignition system:

  1. Remove the plastic facing around the steering wheel and the ignition lock.
  2. Find the wires that go to the starter.
  3. It is necessary to crash into electrical panel. To do this, remove the isolation from the wire site, connect the radio transmitter contacts to it.
  4. Securely lock the device, and the location in which the device crashed is to be insulated.
  5. Check the operation of the block. Included to the transmitter there is a special device whose impact on the radio transmitter leads to the restoration of the chain. His driver must wear with him.

Locking diagram of starter device and ignition system

Safety technique

When creating and connecting the block, terminals are turned off rechargeable battery. This is a prerequisite, otherwise you will provoke a short circuit and failure of another electrical equipment.

To create a "secret", the car owner must have knowledge and skills in the field of electronics. Invalid connection can lead to the failure of the block.

pros

Advantages of "Secret":

  1. Available for many consumers cost. If the machine is not equipped with an anti-theft system, then the installation of the secret blocker will become the most fiscal option for protecting protection.
  2. Good efficiency. When the "secret" is triggered, a significant part of the time takes a significant part of the attackers. In practice, hijackers faced with the presence of a secret blocker are leaving the crime scene.
  3. The connected blocking device practically does not consume energy. You will not have to worry about the discharge of the battery. Even if the battery is discharged, the presence of a "secret" will not affect its performance.
  4. The secret button allows you to ensure the proper level of protection of the car along with other anti-theft devices, for example, alarm or sensors.
  5. Installation of a device in any model of the machine as russian productionand a foreign car.
  6. When installing "Secret", the main vehicle systems are blocked. Depending on the model, this may occur after three or five attempts to enter the password.
  7. The main advantage is that the criminal cannot intercept the signal, as in the case of auto alarm.

Minuses

According to reviews, such devices have a minimum of flaws. Possible failures in the operation of blocks, but it is rather an exception than the rule.

Adaptations against car hijacking can be used completely different. These may be immobilizers, autochegers, GPS trackers, specialized alarms, as well as blocks such as pin or castle secrets.

Dear readers! The article tells about the typical ways to solve legal issues, but each case is individual. If you want to know how solve your problem - Contact a consultant:

Applications and calls are accepted around the clock and seven days a week..

It is fast i. IS FREE!

But before buying a block, it is worth thinking, and whether it is possible to make it yourself. Why overpay, if independently really really on the wheel or steering wheel of your car.

It is only worth understanding their schematic device, varieties and installation method.

What applies to the secrets

Consider what is generally a secret, for which it is needed, and how it works. The secret is, first of all, a special device that effectively protects the machine from theft by blocking the steering mechanism, fixing the wheel from movements, as well as by installing a device that simply won't give the machine.

Often, such a device is mounted independently of the car's security system, which attracts auto owners to its use. After all, this is a good anti-theft version as an addition to the security alarm.

Devices can be made with standard buttons, and can be made with microcopters of a mechanical principle of operation, in the form of togglers, sensory sensors and other options.

This "gadget" is used for purpose depending on its design by pressing the programmed or secret manual button that blocks the starter.

Also, the secret of the car from the hijacking can be brought into its functional action using a toggle, which is also disconnected.

In addition, it perfectly prevents the operation of the fuel pump, blocks the hood lock so that the thieves do not scratch and do not stole the parts of the car, because it often happens. By and large, the options for performing such devices are just a mass.

For example, the essence of the secretion for the engine is alone - to provide any ways to the impossibility of starting the aggregate. Often, a certain algorithm of actions is hidden from the thief, which is familiar only by the owner of the car.

Similarly, the principle of protecting the wheel is also valid. The device works in such a way that it blocks not only the movement of the wheel, but also removal, disassembly.

In other words, the thief will not be able to leave on your car or remove the wheel without a special key that can unlock the lock on the anti-theft device.

Of these two examples - secrets on the motor and wheel - it is necessary to select that the electronic devices are more often used for the engine, and mechanical for wheels.

For electrical devices, a secret tamblers are used with a power chain break function when igniting.

Even if you have the keys from the car along with the alarm keychain, the secret device on the engine perfectly cope with its anti-theft task.

Varieties

The secrets are different, their systems and designs are based on completely different principles of work.

Already the use of such equipment is so extensive, constantly developing, replenish the options for new types, which can be written up the simplest classification that reflects the species of anti-theft devices.

So, secret anti-robes are:

  1. Electrical:
    • toggle switch to break the electrocups when igniting the starter;
    • toggle switch to block the power supply of fuel in the engine;
    • toggle switch for ignition lock;
    • and other features.
  2. Electronic:
    • push-button devices that block the start of the machine engine;
    • motion sensors;
    • electroschockers;
    • devices with special codes and passwords.
  3. :
    • blocking wheel lock device in the form of a bolt and nut with a unique pattern and a special key with the same pattern print to open the lock;
    • blocks on the steering wheel or door locks;
    • blocking the castle of the hood and trunk;
    • overlap the exhaust pipe;
    • and other options.

On the principle of action or algorithm for the use of the device against theft of the car can be divided into secrets:

  1. With a specific sequence, a combination of a button pressing a button.
  2. Control of the hood lock design.
  3. Closing and opening the device using a code set, password.
  4. Entering code in a specific sequence for standard, as well as using additional buttons.
  5. Tracking the car location using a built-in monitor motion sensor.
  6. Motion sensor, with which you can only start the machine, but do not go on it.
  7. Hinged blocker - mechanical device.
  8. Castle devices with added signal lilac.
  9. Other options that are just a mass.

The advantages of electronic versions of the secret is that they are simply the inability to consider special programs that thieves often use.

And if you attach the anti-theft under the hood in such a place that you know only one, then you can even count on the fact that the hijackers simply will not find it.

Operating principle

Anyone installed on the unit or some item will have its own principle of operation. A factory secret is installed on the engine, which simply closes the electrical circuit, not allowing the necessary spark to work for the engine.

So, if you need to block the work of the starter or, for example, the carburetor, then simply connect the toggle switch to the minus wire in an unnoticed area of \u200b\u200bthe wire.

Make the wires to the buttons on the control panel in the cabin of the machine, where, for example, the headlight corrector or the inclusion of the furnace to manage the secret itself.

If this is done in several places, then you can win enough time while trying to steal your car.

The homemade variant of the anti-theft system can also be on the exhaust pipe, which allows to overlap its internal moves. Suitable such a device inside, where the tube valve is located. You can control the device remotely.

It acts as follows - you can start the machine, the motor starts and it even works for some short time, and then simply stalls.

There are no successful gases to go out, the hijacker is unlikely to immediately guess about the blocked valve inside the exhaust pipe, and therefore he will decide that the car is defective and retrieved from the place attempt to make theft.

Additional locks or magnetic latches on the steering wheel or transmission, the wheels all work on the principle of partial and complete immobilization of parts, systems, elements, which also creates a lot of problems with hijackers.

You can also provide a wire system that depart to the carburetor or starter, a special radio protector.

His principle of work is that when approaching him, his work begins - it simply automatically closes the chain without giving the car to start.

The only one perhaps may be inconvenience - this is what will have to carry a transmitter with me, which is part of this system.

Schemes of secrets on the car for installation do it yourself

When the engine is blocked, different algorithms can be used - the so-called "passive" and "active". The first version of the specialists are recognized as the most effective, because it does not allow you to start a car in a de-energized state.

All relay contacts with a passive system algorithm open normally and such locking can still be called HP.

To remove such a blocking, you will need to start the voltage of electricity, then only the relay will switch to the engine.

The algorithm for blocking "Active" is most often attributed to vulnerable systems, because with it without power it is possible to start a motor machine.

Its relay is in position normally-closed (NZ), approximately as contacts in the "Protection" mode of a blocking relay. An example can be seen in Fig. 3, where the ignition blocking scheme and the activation of alarm is shown.

The presence of closed contacts (in fig. Points - 87 and 30) suggests that even in the position of the blocking device, when there is no voltage on the relay winding, then these contacts will be allowed to start the engine, although it will not give to start the starter.

To de-energize the work of the benzonasos, you also need to provide the secretion of the anti-theft system. It is enough to build a relay within the signaling module itself in the communications of the pump feeding.

The principle of operation of the relay is to burst the high-current electrocups that feeds the operation of the electric pump. .

With such schemes, the hijackers will have to be sweat to find the location of the chain break, eliminate it or find the connector from which you need to remove the device, disconnect the necessary wires, find the "masses" in the connectors - and for all this it is necessary to have a family of spans in the forehead so that all this Detect in a short period of time.

It is unlikely that the Warre will want to mess around so long with the car to determine in where the secret is located and how many of them, perhaps, the secret devices can stand several.

How to put

If we make a secret to the secret, for example, for the wheel, then this is a very difficult case - literally jewelry. Not to mention the independent manufacture of an electronic system or radio programs, which can be solely made only in factory conditions.

Therefore, you are thinking you will need non-served knowledge and practice. To block the wheel you need to take bolts, for example, from an old vase.

A blank is made by three holes that should be placed symmetrically to each other. Thread is made in the holes. Then a large hole is made under the bolt, as threaded.

Then three bolts are stacked in three holes so that they are pretty pressed to the mandrel. However, most of the car owners still prefer to access Tokaryam or other specialists in the manufacture of secrets.

To install the electrical system, you need to buy any wireless relay on the radio market, for example, is suitable - Hock-Up, Wait Up.

Such a device is installed in a section of the wire of any chain, but only a plus, if you consider regular wires. All wires from the relay are displayed on the control panel into the cabin car.

Suppose a miniature button can be placed under the cladding of the ignition lock or still hide somewhere in the panel so that only you know where it is.

According to the instructions, an electronic device is installed. The instruction is usually always attached to the product.

What is better to choose from devices

Choosing that it is to put in addition to its anti-theft system of the car, one can prefer either a variant of a mechanical system or connected to electrical - it all depends on you.

Experts claim, for example, that many middle-class motorists prefer mechanics and "protect" wheels, steering wheel or pedals. Often it is motivated by the fact that the electronics often brings, and the mechanics - much less often fails.

The secret of the car from theft is the type of security system operating on the principle of blocking. When trying to rip the auto, the device installed in a specific place is activated and blocks the operation of the engine or other systems.

[Hide]

How does the secret take on the car?

If you want to start a power unit, the car owner presses a special button or applies a magnet to a specific place. The secrets are disconnected after entering the password or using an additional key. If the attacker hacked the car and deactivated the alarm, then further ride will be impossible. The offender will have to spend time to find a key and deactivate it.

The principle of operation of the device is shown on the example of a simple anti-rone:

  1. When the password is activated or the button is turned on, the security system locks the steering wheel, wheels, engine or other node.
  2. When an attacker attempted to hijacking, the mechanism remains blocked. If it is installed on the engine, then the power unit will begin, but stops in a couple of minutes. It will not allow the criminal to leave far.
  3. If the password is entered several times incorrectly, then all the systems of the car are blocked to which the secret button is connected.
  4. When trying to parse mechanisms and systems, some models of the secrets begin to make an alarm sound signals. It should scare off the criminal.

The secret will never replace the alarm, but will provide an additional frontier for the vehicle protection.

User Mikhail Autoinstructor spoke about blocking mechanisms and their principle of action.

A variety of secrets by mechanism

The secret buttons against the engine start can in different ways to protect cars depending on their device. According to the mechanism of the anti-theft is divided into electronic and mechanical.

Mechanical secrets

Between themselves, such devices are divided depending on the method of blocking nodes:

  1. Button to protect the wheels of the car. The device of this device is a lock equipped with a nut and bolt. The mechanism is based on a unique drawing with a special key, there is an original imprint on the latter. It is used to deactivate the block device.
  2. Anti-holes for mounting on the wheel of a car or door locks. Prevent the discovery of locking products or block the steering wheel from scrolling.
  3. Security devices designed to block hood or door locks luggage compartment. The first option is more appropriate. Since getting access to motor compartmentThe attacker will be able to unless hack alarm, then kidnap the valuable knots or aggregates for the car.
  4. Fixtures for blocking the exhaust pipe. Activation of such a device allows you to block the muffler. Because of this traffic fumes They will not be able to go out. As a result of a difficult removal of spent gases, the power unit will function incorrectly and the machine's motor will stop several minutes after launch. The attacker may have the impression of the engine breakdown.

The mechanical version of the secret is more susceptible to hacking and is considered less reliable due to its constructive features.

The channel "Remavto" spoke about hacking secret bolts for the wheels.

Electronic secrets

Such anti-theft devices are also divided into several types:

  1. Push-button blockers. Used to prevent engine start. Can be used in vehicles equipped with a function of automatic start of the power unit.
  2. Motion and sensitivity sensors. Designed to determine activity in the car.
  3. Electric shepherds. One of the most effective options. When trying to hack a criminal gets a blow to the current, so further actions in the hijack will hardly be undertaken.
  4. Devices equipped with codes and passwords. This option is reliable. If the password is entered incorrectly, the unlock button is not possible.

Types of Secretakes on the principle of action

Anti-theft devices can be divided according to the principle of activation and deactivation:

  1. With a specific sequence programmable by the manufacturer. The deactivation procedure is carried out by pressing the password to shut down.
  2. Anti-theft systems that allow you to enable and disable the blocking device using the password.
  3. The anti-the activation and deactivation procedure can be carried out using a password, which is entered by regular buttons or togglers. Moreover, entering the code must be carried out sequentially.
  4. The secret movement sensor automatically turns on if an attacker has access to the car's cabin. The controller will start and will function, sending the information to the car owner. Some sensors allow you to determine the activity in the cabin and transfer the coordinates about the location of the machine.
  5. There are controllers of motion that perform the blocking of the power unit when trying launch of DVS. They cannot transmit coordinates about their location, but do not give an attacker the ability to go to the car.
  6. Hinged type of fixtures, refers to the class of mechanical devices.
  7. Locks, equipped with an added lirefront. When trying to break the alarm signals.

Dmitry Bondarchuk spoke about the species of the secret of the car from the hijacking and showed an example of the blocking mechanism.

On the wheels of cars

Blocking devices that put on wheels are divided into three types depending on the profile:

  1. Blocks in the form of an asymmetric polygonal figure. This method Preventing hijacking is simple in terms of performance and device. The number of polygonal figures may vary from 8 to 40 pieces, their number is directly proportional to the level of protection. Installation of the profile is carried out on the external and internal bolts. Devices equipped with 30-40 faces are made only with an internal profile.
  2. Facility equipped with a curly profile. This type The blocks are complex in terms of the device and allows you to provide more effective protection wheels. The profile component of the device is made in the form of a set of lines. different sizes and curvature. If the consumer does not have a key, then remove the screw and unlock the operation of the wheels will not be possible.
  3. Secret buttons of a hole-type. There are special holes in the head of the bolt. Among themselves they differ in size and depth. The location of such elements may be chaotic.
  4. Combined devices. This is a combination of figured and holey secrets for the wheel. According to experts, this option is considered as reliable as possible.

On the hood

This type of blocking devices is used to prevent the embezzlement of the main elements and nodes installed in the engine compartment. The secret buttons on the hood block the lock operation and do not allow it to open even from the car's salon. An additional blocking device must be put aside from the castle back from the standard cable. At the other end, a keyboard is installed with a key, it can be placed in the glove compartment or under the instrument panel. If this lock is locked, then open the engine compartment using the standard handle will not work.

User Leonid Kovalenok spoke about the use of a secret device for blocking access to the engine compartment.

On the engine

Such a secret is an immobilizer needed to prevent the engine running. The principle of operation of the secret button is based on the discontinuity of electrolynee contacts by one of the main systems required to start. For example, the starter mechanism or chain of the fuel pump for fuel supply. If the code for unlocking is entered correctly, the contacts will be closed, and the starter is unlocked. If the password is incorrectly entering the security tool goes into reinforced operation.

To ensure maximum protection and installation of the installation, the immobilizer connects to any standard button in the car cabin. If required, a separate switch is displayed - it will reduce secrecy, but you can install the toggle switch anywhere in the cabin. It is important that the owner of the car can reach the key, being in a driver's seat.

Among all the blocks, this type is the most reliable as possible, as it is impossible to bypass it. The main advantage is that the node is installed secretly, and only the car owner will unlock it.

On license plate

This type of blocks is used to protect the numbers. According to the principle of the device, similar to the secret buttons for installation on the wheels. Structurally, they are performed in the form of bolts, on the hats of which are embossed images. To deactivate protection, you will need a unique key that is included in the package. It has an appropriate embossed pattern.

Piopatron

If an attempt is an attempt to the hijacking of a vehicle, the pyropatron is activated and will produce a portion of the caustic gas into the air. Its price is high enough, and the use can harm the car, in particular, his salon.

As a result of spraying gas by the Pyropatron, an attacker will not be able to complete the hijacking of the car, but the smell of gas will remain in the cabin for a long time. Therefore, the use of such a device is a radical way to protect the car from theft.

Photo Gallery

Photo different types Secretakes are presented in this section.

Secret for protection car number Set of blocking devices for wheels Protective agent for car - Pyrinatron

Instruction how to make it yourself

After studying the scheme of the secret button and preparing the necessary materials and tools, you can make the device yourself.

What do you need?

To fulfill the task, you will need:

  • several wires;
  • lock relay or special radio transmitter;
  • toggle switch to activate and disconnect.

Scheme secret


Electroscham Secretakes for Starter Lock and Ignition System

Step-by-step action

The option of creating a starter mechanism and ignition lock of the car:

  1. Removing plastic cladding in the car's cabin. It is necessary to remove the protective covers around the steering wheel and the ignition switch.
  2. Search for electrical caps that go to the starter mechanism.
  3. At the next stage, you need to crash into a regular electrket. To do this, remove the insulating layer from the site of the found cable that goes to the starter. It is configured to connect the lock relay or radio transmitter. In the first case, you will need to further extend the wire for connecting the switch. The toggle switch is installed in a secretive place.
  4. A high-quality fixation of the device is performed. The location of the conductor connectivity should be insulated using a shrink tube or a tape.
  5. Diagnosis is performed by the correctness of the work performed using the device, as a result of the impact of which contacts the contacts occurs. This device works on the principle of wireless immobilizer.

How to install a secret?

Put the secret button you can independently. A simple option is to install a block on the wheels of the car. To do everything quickly and efficiently, the working screws will need, it is allowed to use the details from old vases.

The installation procedure is performed as follows:

  1. Using a drill, you need to drill three holes that will be located symmetrically relative to each other. In each of them you need to make a thread.
  2. Then another hole is made with threads, but its diameter will be greater. At this stage it is recommended to contact Tokaryam, since it is not necessary to fulfill this task with a qualitatively for everyone.
  3. Installation of bolts in the holes made. When installing, they must be tightly fixed on the rim.
  4. In order for the secret tool to work from the button, you must make the power supply. To perform this task, you need to purchase a wireless relay, this item can be taken on the radio machine. It is possible to apply secret mechanisms of any types, for example, HOCK-UP.
  5. The relay installation is made on the plot of electrocups. Mounting should be carried out by a plus contact, it is necessary to take into account the features of the laying of standard electrolytes. All wires from the chain should be displayed to the dashboard or another place of the cabin. To ensure the hidden installation, the laying can be carried out under the cladding of the central console.
  6. Using the instruction that is included in the package, the installation of electronic filling is performed. When difficulties appear at this stage, contact the electrician.

Auto electrician Sergei Zaitsev told about independent installation and connecting the contacts of the secret device for cars.

With independent installation of the blocking device, it is recommended to consider the nuances:

  1. Installing the togglers and switches must be made in the machine's secular location. Contact elements of the device are connected to the electrical caps of the carburetor or the starter mechanism. Connecting a toggler is carried out to the negative line. A posting connection with standard switches, such as optics or heating system. The use of several switches will benefit the time when hacking the car.
  2. A simple way to protect protection is the installation of a magnetic latch on the gearbox or steering wheel. This element will block the system.
  3. With funds, a corporate immobilizer is installed. Its connections are performed on the electrole area, which is used to start and operate the power unit.

Benefits

Pros characteristic of blocking devices:

  1. Available for buyers Price. If there is no signaling in the car, the installation of the secret button will allow to provide a budget option protection. The cheapest anti-theft mechanisms are from 500 rubles.
  2. High efficiency. If the secret button is activated, it takes a criminal at the hijack time.
  3. If the device is electronic, it will consume the minimum of the energy of the AKB. Therefore, the battery will not discharge. Sorting battery will not affect the functionality of the secret button.
  4. The use of the block will provide high protection in conjunction with other security systems.
  5. Secret buttons - universal protection option. Their installation is possible as on domestic carsand on vehicles Foreign production.
  6. The lack of signal interception. Conventional auto alarm can be hacked using CodeGramber. With a secret, this option will not pass.

disadvantages

The cons of the secrets are more characteristic of individual models of blocks. According to user reviews, there are no deficiencies in such devices. Possible failures in the work of the secret when the mechanical component fails.

© 2021 Bugulma-lada.Ru - Portal for car owners