Introductional information

• Content

  
  Daily checks and troubleshooting
  Operation of the car in winter
  Trip to STR
  User's manual
  Cautions and safety regulations when performing work by car
  Basic tools, measuring instruments and working methods
  Mechanical part diesel engine 2.2 L.
  Mechanical part of the gasoline engine 2.4 l
  Mechanical part of gasoline engine 3.0 l
  Cooling system
  Lubrication system
  Supply system
  Engine management system
  Inlet and release system
  Electrical engine equipment
  Clutch
  Manual Transmission
  Automatic transmission
  Transfer case
  Drive shafts and rear leading bridge
  Suspension
  Brake system
  Steering
  Body
  Passive security
  Air conditioning and heater
  Electroschemes and connectors
  Dictionary

• Introduction

  Introduction

  In 2010, the premiere of the updated version of the seminal version took place at the Paris Motor Show chevrolet crossover Captiva. Sales of a car manufactured by the South Korean GM branch began in the spring of 2011.

  

  New model, I received the factory index C140 (the previous one wore the designation C100), due to the changed design of the front of the body, it became noticeably more attractive. Narrow headlamps, angular side air intakes and clearly divided by a radiator grille with an emblem throw make a car recognizable at first sight and emphasize his sporty style. The rear of the new model from the previous version of Captiva is practically unchanged, except for transparent rear light scatteers.

  

  The spacious salon is distinguished by a good visibility. The rear panorama does not overlap even with the third rows raised seats. Quality interior finishing materials are distinguished by practicality. In the center of the dashboard, a bright spot highlights a large color navigation system, a route computer and other multimedia information. Female devices, and all controls are at hand. The abundance of various compartments allows you to accommodate a large number of minor items with convenience so that they do not interfere with anyone during the trip. Interesting solution Cups with a double bottom, under which there is a deep compartment with a USB jack, ideal for storing a mobile phone, camcorder or player.

  

  New Captiva retained the valuable quality roomy family car: If desired, the salon with full seats of the second and third rows can be transformed into a cargo compartment with a perfectly smooth floor, and you can add the seats individually by selecting a convenient configuration. The maximum amount of cargo compartment is 1577 liters one of the best indicators in its class.

  

  The main changes in the updated model Captiva touched the line power aggregates. Gasoline engines working volume 2.4 and 3.0 l are able to develop power up to 171 and 258 hp Accordingly, a turbodiesel of a volume of 2.2 l depending on the degree of forsing, the capacity is 163 and 184 hp. All motors other than three-liter are equipped with a 6-speed manual transmission. The most powerful engine is equipped with six speed automatic transmission.

  All-wheel drive with a multi-disc clutch ITCC (Intelligent Torque Controlled Coupling - Development of the Japanese Concern JTEKT) transmitting torque to the rear wheels on the command of the tracking electronics, in combination with an impressive road clearance 180 mm allow you to boldly exploit the car not only on asphalt roads. Features Hill Start Assist and Hill Descent Control facilitate the touch of the car on the slope and its descent on Kosoyar.

  Fully independent suspension (in front of McPherson, rear of multi-dimensional) without any problems copes with road irregularities, and accurate steering And powerful brakes provide a car excellent handling.

  

  Steel frame with the zones of the programmed deformation, absorbing the energy of the blow, frontal and side airbags, security curtains (in some versions), as well as three-point seat belts with pretensioners provided the car high performance by the results of the crash tests by an independent Organization EURO NCAP. In addition, the safety of ride is ensured by the presence of systems active security: Anti-Personal ABS brake system with electronic distribution of EBV brake efforts, ESC dynamic stabilization system, hydraulic brake amplifier NVA and active protection system from overturning the ARP car.

  Modern design, excellent dynamic indicators and handling, as well as the wonderful ratio of "Price quality" make Chevrolet Captiva. 2011 model year worthy representative of his class.

  

  In addition to South Korea The production of Chevrolet Captiva is engaged in the plants of Russia, Kazakhstan and Uzbekistan. In addition, the model is sold in Australia and New Zealand under the brand of Holden Captiva.

  This manual provides instructions for the operation and repair of all modifications Chevrolet./ Holden Captiva (C140), manufactured since 2011.

  Chevrolet / Holden Captiva (C140)
  2.2 TD (163 liters.) Body Type: Universal Engine volume: 2231 cm3	Drive: Full connected	Fuel: Diesel Capacity fuel tank: 65 L. Consumption (city / highway): 8.4 / 5.3 l / 100 km
  2.2 TD (184 liters.) Years of release: from 2011 to the present Body Type: Universal Engine volume: 2231 cm3	Gearbox: Six-speed mechanical Drive: Full connected	Fuel: Diesel Fuel tank capacity: 65 l Consumption (city / highway): 8.4 / 5.5 l / 100 km
  2.4i (167 liters.) Years of release: from 2011 to the present Body Type: Universal Engine volume: 2384 cm3	Gearbox: Six-speed mechanical Drive: Full connected	Fuel: AI-95 Fuel tank capacity: 65 l Consumption (city / highway): 11.8 / 7.4 l / 100 km
  3.0i V6 (258 liters.) Years of release: from 2011 to the present Body Type: Universal Engine volume: 2997 cm3	Transmission: Six-speed automatic Drive: Full connected	Fuel: AI-95 Fuel tank capacity: 65 l Consumption (city / highway): 15.7 / 8.1 l / 100 km

• Emergency Situations
• Exploitation
• Engine

Chevrolet Captiva Operating Instructions. Controls, dashboard, Equipment salon Chevrolet. Captiva.

2. Controls, dashboard, salon equipment

Instruments and controls

Combination of devices

Speedometer

The speedometer shows the vehicle speed in kilometers per hour (km / h).

General / daily mileage counter

Odometer shows the total car mileage in kilometers.

There are two independent distance counter, which show distances traveled since the previous reset of the counter. To reset each run counter, press and hold the distance meter button. The button meter button is located in the lower right Speedometer sector. The distance meter button allows you to switch between the distance meters A and V.

Tachometer

Tachometer Shows Rotation Rotation crankshaft Engine in revolutions per minute (rpm). Do not raise the engine speed so much that the tachometer arrow will enter the red zone.

Fuel level pointer

Shows the fuel residue in the fuel tank when the ignition is turned on. After fueling fuel and start the engine, the fuel level index arrow is slowly moving to a position corresponding to a new level. The arrow of the fuel level pointer may vary due to the displacement of the fuel in the tank during braking, overclocking and passing turns.

Temperature pointer

When the ignition is turned on, the temperature of the engine coolant.

Visual indicators and alarms

Minimum fuel reserve alarm

It lights up when the ignition key is translated into the ON position and goes out after a few seconds. This signaling device also lights up at a low level of fuel in the tank.

ECO mode control lamp

The ECO mode control lamp lights up when the ECO mode key is pressed (low fuel consumption mode), located on the center console next to the gear switch lever. When pressing the key, the ECO mode is turned off and the control lamp goes out. On vehicles with a gasoline engine when translating the ACP selector to the manual control position, the test lamp goes out.

ABS fault signaling device

The ABS fault signaling signal lights up for a short time when the ignition key is translated into the ON position. At this point, the system conducts self-diagnosis. After a few seconds, the lamp should go out.

Contact a service station for repair if ABS malfunction is:

Does not light up when the ignition is turned on.

Does not go out.

If the ABS signaling device lights up while driving, then malfunctions are possible in the ABS system. Despite the fact that the car can work normally and without ABS, in the case of a sharp braking of the wheel can be blocked. In this case, it should be as soon as possible to contact an authorized Chevrolet dealer to check and repair the system. We recommend contacting an authorized Chevrolet dealer.

Airbag malfunctional

When the ignition key is transferred to the ON position (on), the fracturing system malfunction flashes several times. This testifies to the health service.

In case of malfunction in the system of inflatable airbags, the signaling device:

Does not blink or continues to burn when the ignition is turned on;

Continues to burn after several outbreaks;

Blinks during the movement of the car;

Lights on a permanent light during movement.

Disabled airbag indicator

The indicator is located above the glove box. Enable if the front passenger airbag is disabled.

Brake system malfunction

The brake system malfunction signal lights up when the ignition is turned on before starting the engine. This means that the alarm is working normally. The signaling device should go out after starting the engine.

With a low fuel level in the tank, the working brake system malfunctioning lights up.

In this case, do the following:

1. Carefully go with the roadway and stop.

2. Check the fluid level in the brake hydraulic tank.

4. Contact a service station, moving at the same time, and check the brake system if the brake system ensures the safety of the vehicle.

5. Call the tow truck and depart the car to the maintenance station for diagnostics and repair, if the following condition is observed:

Detected leaks in the brake system;

The brake system malfunction signaling lamp is burning.

Control lamp electromechanical parking brake

On cars with an electromechanical parking brake when starting the engine, the control lamp of the parking brake lights up for a short time. If this does not happen, refer to the authorized dealer for maintenance. The control lamp of the parking brake lights up when the parking brake is turned on. If the lamp continues to flash after parking brake It was turned off, or during the movement of the car, this indicates a malfunction of an electromechanical parking brake. If the control lamp does not light up or stop flashing, you should contact an authorized service center.

On vehicles with an electromechanical parking brake, the parking brake warning lamp should light up for a short time when the ignition key is transferred to the "ON / START" position (On / Start). If the lamp does not light up, it should be replaced to be able to learn about possible malfunction Systems. If the control lamp is on, this indicates the presence of a malfunction, as a result of which the parking brake system operates in a limited mode. You can continue to move, but try to contact a hundred as soon as possible.

On cars with an electromechanical parking brake, this lamp lights up if the parking brake switch is released, but the pedal of the working brake is not squeezed. To turn off the electromechanical parking brake, it is necessary to squeeze the brake pedal before pressing the switch button.

Battery Charging System Fault Signal

Signals the absence of battery charging. When translating the ignition key to the ON position (On), the alarm must light up. After starting the engine, the alarm must go out.

If the battery charging system malfunction lights up while driving, do the following:

1. Carefully go with the roadway.

2. Stop the car.

3. Make sure drive belt Not weakened and not broken.

4. If the drive belt is in a normal operating condition, but the battery charging system malfunction continues to burn, it may indicate a malfunction in the charge system. Urgently contact the maintenance station for repair. We recommend contacting an authorized Chevrolet dealer.

Pressure drop signal in the engine lubrication system

Briefly lights up when the ignition is turned on before starting the engine. The alarm must go out after starting the engine. If this signaling device lights up while driving, it may indicate a dangerous pressure drop in the engine lubrication system. Immediately muffle the engine and check the oil level in the engine.

With a low oil level, the engine oil of the recommended quality and viscosity to the proper level. If the oil level is normal, contact the car service to check the engine lubrication system. We recommend contacting an authorized Chevrolet dealer.

Malfunction Alarm In Engine Systems

Briefly lights up when the ignition is turned on before starting the engine. The alarm must go out after starting the engine.

This malfunction (MIL) signaling lights up when the components of the toxicity reduction system are faulty and associated subsystems. This alarm continues to burn until the engine control unit (ECM) registers a malfunction. When a serious ignition pass is detected, the MIL warning device is constantly flashing. Serious ignition skipping can damage the catalytic neutralizer. The fault pointer control lamp also lights up when the diesel engine diesel filter fault occurs. In this case, immediately apply to the maintenance station for repair. We recommend contacting an authorized Chevrolet dealer.

You can continue the movement without the risk of damage to the car, if you release the accelerator pedal to such an extent, so that the flashing stops and the MIL indicator moved to constant burning mode. Nevertheless, it is necessary to urgently apply to the maintenance station for repair. We recommend contacting an authorized Chevrolet dealer. If the MIL signaling device lights up for a short time, and then turns off again, it means that the system is working normally and there is no fault.

Transmission Lever Position Lock (Automatic Transmission)

Shows the position of the shift lever.

Inversion indicator front fog lights

Lights with front fog lights included.

Turning on the rear fog light indicator

Lights when the rear fog lamps are turned on.

Excusted driver safety belt alarm

When the ignition key is transferred to the ON position (on), the driver's safety belt alarm lights up for a few seconds and then goes out. This means that the system performs self-test. After starting the engine, if the driver's seat belt is not securely fixed, the alarm is flashing for 90 seconds, and then it burns exactly until the driver's seat belt is fixed. Then, if the vehicle speed exceeds 22 km / h, the indicator again starts flashing accompanied by sound alarm for 90 seconds, and then it burns exactly until the driver's seat belt is fixed.

If you want to turn off the buzzer, not a fastening belt, follow these steps: When the ignition key is in the ON position, button and unzip the seat belt lock. This operation must be done twice for 10 seconds. Sound alarm can sound again a few minutes after turning off the ignition.

Rotation indicators / emergency lighting indicators

Indicators of rotation / emergency lighting indicators indicate the serviceability of turning pointers or emergency light alarm. If the green arrow flashes when you press a steering wheel control lever or the emergency lighting buttons, check the fuse and replace in case of malfunction.

Far Light Light Indicator

Land light indicator lights up when the headlights are turned on.

Stabilization System Turning Indicator (ESC)

It lights up when the ignition key is translated into the ON position and goes out after a few seconds.

Enabling the ESC system shutdown indicator indicates that the system has been disabled by pressing the "Off key. ESC "located on the instrument panel.

Stabilization System Activator (ESC)

It lights up when the ignition key is translated into the ON position and goes out after a few seconds. This alarm is blinking during the ESC. The constant burning of the indicator indicates the presence of a malfunction in the system.

Activator Activity / Networking Assistance System when moving down

The indicator of the activity of the system of help when moving down is lit with green light, and the unwilling sensor of this system is yellow. The Assistance System Activator DOWN SYSTEM Lights down in the case of the readiness of this system to use and blinks with green light when the system is started by pressing the corresponding button located in the dashboard center.

Features of the indicator of the unpretentiousness of the help system when moving down:

Flashing with yellow light indicates that the system of help when moving down is not ready for work due to high temperatures (about 350-400 ° C) rubbing parts (front block) associated with strong or multiple braking. This lamp will go out by reducing the temperature of the rubbing parts (front shoe) to a level not exceeding 350 ° C.

The continuous luminescence (yellow light) indicates that the normal operation of the system is broken due to a high temperature (more than 400 ° C) of rubbing parts (front block) associated with strong or multiple braking. This lamp will also go out when the temperature of the rubbing parts is reduced (front shoe) to a level not exceeding 350 ° C. The flashing and burning of the lack of readiness / malfunction of the help system when driving down (DCS) indicates that it is necessary to make a cool brake pads (you should not use brakes as long as possible). The above temperature can be somewhat varied depending on the state of the car, external conditions (season time, air temperature) and other factors.

Immobilizer system signaling device

It lights up when the ignition key is translated into the ON position and goes out after a few seconds. The inclusion of this alarm indicates a malfunction in the immobilizer system.

Parking Assistance System Signal

It lights up when the ignition key is translated into the ON position and goes out after a few seconds. The burning of the signaling device to the smooth light indicates the presence of a fault in this system.

Windshield Waterster Low Level Layer

It lights up when the ignition key is translated into the ON position and goes out after a few seconds. This alarm is included in the case of low flushing fluid level. When you turn on this indicator, the flushing fluid.

Car maintenance warning device

Engine Coolant Temperature Signal

It lights up when the ignition key is translated into the ON position and goes out after a few seconds. This alarm prevents the overheating of the engine coolant. If the car moved in normal road conditions, you need to move from the roadway, stop and give the engine to work for a few minutes on idling. If the signaling device does not go out, plunge the engine and contact the service center as soon as possible. We recommend contacting an authorized Chevrolet dealer.

An open door alarm

It burns when any door is open or closed loosely.

Announcer open rear door

Lights when the back door or the rear window is open or looked.

Cruise control indicator

Lights when the cruise control is on. The indicator goes out when the cruise control is turned off.

System Systemer full drive

It lights up when the ignition key is translated into the ON position and goes out after a few seconds. This signaling device flashes if the full drive system is temporarily disabled, and it is constantly on the presence of a malfunction in this system. In the case of turning on the signaling system of the full drive system, you should contact the service station to eliminate this malfunction. We recommend contacting an authorized Chevrolet dealer.

Motor oil replacement warning device

It lights up when the ignition key is translated into the ON position and goes out after a few seconds. The car may have a system for monitoring the service life of a motor oil, which reports when it is necessary to replace the engine oil. Turning on the engine oil replacement alarm indicates the need to replace the engine oil. After replacing the engine oil, it is necessary to reset the service life of the engine oil. After resetting the engine oil replacement warning device turns off.

Incandescent Candle Indicator (Diesel ONLY)

It lights up when the ignition is turned on and continues to burn a short time or can immediately turn off. The waiting time varies depending on the temperature of the engine coolant. After heating the incandescent candles sufficient for the cold start, the indicator turns off. Then the engine should be launched.

Safety filter indicator (diesel only)

The control indicator of the particulate filter lights up or flashes if the scene filter needs cleaning, and the conditions of the previous trip did not allow automatic regeneration. Continue moving, maintaining the engine speed above 2000 revolutions per minute (when necessary, switch to a lower transmission) until the indicator goes out. The indicator will go out as soon as the regeneration operation is completed. At high speed and engine loads, the cleaning time decreases. During cleaning, stop and turn off the engine is not recommended.

Watering of water in fuel (diesel only)

This alarm is turned on when the water level in the fuel filter exceeds a certain level. If such conditions occur, immediately drain the water from fuel filter. The signaling device is turned off after the discharge is complete. To drain the water from the fuel filter, you must contact the maintenance station. We recommend contacting an authorized Chevrolet dealer.

Fault Alarm (SPS)

The failure signaling device of the adaptive steering system (SPS) lights up when the ignition key is translated into the ON position. After a few seconds, the alarm must go out. If the SPS fault signal contains any of the following signals, you should contact the car service as soon as possible. We recommend contacting an authorized service center if the indicator:

Does not light up when the ignition is turned on;

Does not go out;

Lights up while driving.

Indicator trailer

Lights when the car is equipped with a trailer. The indicator goes out after disconnecting the trailer.

Indicator of the anti-theft system

Works when the anti-theft system is included. The indicator of the anti-theft system turns off when the doors unlock the key or using the remote control transmitter. The anti-theft indicator lights up when locking the doors using the remote control or key.

Disconnected anti-theft indicator

If your car is equipped with an additional anti-theft system according to the insurance program, the lighting of the disabled anti-theft indicator indicates that unauthorized penetration and tilt sensors were disabled by pressing the button on the roof upholstery. If you press this button again, the indicator goes out.

Indicator of overall lighting

Indicates the driver that the parking lights are included.

Oil level drop in the engine lubrication system

It lights up when the ignition key is translated into the ON position and goes out after a few seconds. This signaling device lights up at a low level of engine oil. If the low-level engine oil signaling lights up, check the level of engine oil and, if necessary.

Driver Information Center (DIC)

DIC This driver information center, where, after switching on the ignition, the on-board computer data, the automatic temperature control panel, the outdoor temperature and navigation information are displayed.

On-board computer

The on-board computer provides the driver with such data on the movement of a car, as information about the stock of the fuel movement, the average fuel consumption, the average speed and the duration of the movement. Each time you press the "MODE" button, the readings on the display vary in the following order:

The distance that can be driving on the remaining quantity of fuel is the average speed - the movement time - the average fuel consumption is the distance that you can drive on the remaining quantity of fuel.

To reset the average speed, motion time or average fuel consumption, press and hold the "Mode" button for at least two seconds.

To change the distance measurement units, follow these steps:

1. Press and hold the "SET" button at least two seconds. Should start flashing temperature measurement units.

2. Press the "SET" button again. The distance to flash the distance measurement units.

3. Press the A or V button and change the distance measurement units (km).

The distance you can drive on the remaining quantity of fuel

In this mode, an approximate distance is displayed that the car can drive to a complete devastation of the fuel tank. When this distance becomes less than 50 km, "-------" is displayed on the display.

average speed

In this mode, the display shows the average speed. To reset the middle speed, press and hold the "Mode" button at least two seconds.

Move Time

In this mode, the display shows the total movement time. To reset the movement time, press and hold the "MODE" button for at least two seconds. After the value of 99:59, the movement time passes again to 0:00.

Middle fuel consumption

This mode displays the average fuel consumption of the car.

Displays one of the eight gradations of the direction of the vehicle (C, SV, B, Yow, Yu, Yuz, 3, SZ).

Calibration compass

After any disconnection of the information center or battery, the driver's information center is re-calibrated. To do this, you need to drive by car in all directions (360 ° C). Before calibration, the compass will not function properly.

1. If you press both the "MODE" and "SET" buttons at the same time and hold them at least two seconds, the compass display flashes.

2. To perform the calibration, make a slow one full circle in 90 seconds.

3. After the calibration is completed, the compass display will flash.

When performing a circle, you can rotate in any direction, right or left. If one circle is not enough to perform one circle, expand the car as shown on the figure below.

Primary conditions for calibration compass

Press the "SET" button twice in a row.

You can not turn the car for 90 seconds after switching on the calibration mode.

Switches and controls

Central lighting switch

To turn on or off headlights, rear oven or parking lights, turn the head of the multifunctional lever on the steering column. For the center of the lighting switch, there are three positions that activate the following functions:

OFF - turning off all external lighting devices.

turning the parking and rear lights, backlighting the license plate and dashboard.

turning the headlights of the headlights and all the above lamps.

System Lighting Switch automatic control The lanterns have four positions that activate various lighting functions that are listed below.

turning off all external lighting devices.

AUTO - lights automatically turn on or turn off, which should be heated at position or depending on the degree of outdoor lighting. (Default position.)

middle light lights and lights are included in mode.

To disable automatic lamp control system, turn the light switch lever to OFF. After release, the lever automatically returns to normal position. To enable automatic lamp control system, turn the light switch lever to the OFF position again.

Dashboard Backlight Regulator

The dashboard illumination control adjusts the brightness of the dashboard backlight. To weaken the lighting of the panel, press this button and turn it clockwise. To enhance the lighting of the panel, press this button and turn it counterclockwise.

Control angle adjuster of the light beam of near light headlights

Turn on the lowlights of the headlights and adjust the direction of light beams according to the loading of the car.

0 - busy front seats.

1 - Busy all seats.

2 - Busy all seats and cargo in the luggage compartment.

3 - driver and cargo in the luggage compartment.

Day running lights (if this system is provided)

Enable automatically when the engine is started. Daytime running lights are turned off in the following cases:

Turning off the engine;

The inclusion of parking lights;

The inclusion of low headlights.

Function Inclusion Signaling

If the ignition is turned off, and the light switch is in a position or then after opening the driver's door, sound alarm is turned on. However, the alarm is disabled if the lights turn on again after the disconnection.

Battery Protection from Discharge

This car has a function that allows you to prevent the battery discharge, if the headlights, parking lights, fog lights, etc. remain by chance.

Battery protection is disabled if the lights turn on 10 minutes after the activation of this function.

Function of outdoor lighting

The function of the outdoor lighting provides a certain period of external lighting, if it is not entirely light from the outside. This feature is activated when external lights are turned on with automatic light control system when the ignition is turned off.

Doorway backlight lamp

This feature is activated when the light switch is in the AUTO position, and the outside is not enough outside. After pressing the Unlock button on the remote control to fit into the car, the alarm lights are blinking twice, and the external lights will automatically light up for 20 seconds.

Lighting associated with the work of wipers

This feature is activated if the lighting switch is in the AUTO position. If wiper wipers work more than eight cycles, external lights automatically turn on.

Frift switch controlling light indication

Right turn:

Slide the subwoofer up.

Left turn:

Slide the steering wheel switch down.

After completing the rotation, it is automatically turned off the rotation pointer and return the lever to normal. When changing the strip of movement, partially slide the steering wheel switch and delay in this position. When releasing the lever returns to normal position.

Far Light Far Light Switch

To enable high headlights, do the following:

Make sure the headlights are enabled.

Press the multifunctional control lever toward the dashboard.

When you turn on the highlands of headlights, the phase beam indicator lights up. To switch from far beam headlights to the Middle Light, pull the multifunctional control lever to return to normal position.

Signal flow far Light Far

To supply the signal with distant headlights, pull the multifunctional control lever on yourself and release. When releasing the lever returns to normal position. Far Light Heights Lights until the multifunctional control lever is held in the drawn position.

Front Fog Invoice Switch

Fog lights provide:

Additional lighting of the lateral road zones in front of the car.

Superior overview in foggy and snowy weather.

To enable fog lights, do the following:

Ensure that the center lighting switch is in position or.

Rotate the ring in the middle part of the lighting control lever to the position. When releasing the ring of the switch returns to its original position.

When the front fog lights are turned on on the dashboard, the fog light indicator lights up.

To turn off the fog lamps, turn the annular switch to the position. The indicator of the front fog lamps will go out. If there is an automatic lamp control system on the car, then parking lights and headlamp lights are turned on simultaneously with the front fog lamps.

Rear fog lamp switch

To turn on the rear fog lights, turn the ring switch located in the middle of the light switch lever, to position if the headlights of the near light or parking and front fog lights are included. When releasing the ring switch automatically returns to normal position. When the rear fog lights are turned on on the dashboard, the fog light indicator lights up. To turn off the fog lamps again, turn the ring switch to the position. The indicator of the rear fog lamps will go out.

If there is a system of automatic lamp control, then parking lights and headlamp lights are turned on simultaneously with the rear fog lamps.

Windscreen wipers

The lack of a normal review driver may result in a collision and entail injuries, car damage or other material damage.

Do not turn on the cleaner if the glass is dry or the work of the brushes on the windshield is difficult, for example, due to the nanile snow or ice. The operation of the wiper in the presence of interference on the windshield can cause damage to the brushes and the electric motor of the cleaner, as well as the surface of the glass.

In cold weather before turning on the cleaner, check that the brushes did not go to the glass. Turning on the wiper with sample brushes may damage the wiper motor.

To turn on the cleaner, move the ignition lock to the assault position or ON and lift the windshield cleaner / wrath lever.

The lever switching the windshield cleaner has four positions:

OFF (OFF) - The system is turned off.

Standard position.

INT - (intermittent mode): Intermittent wiper operation. Turn the lever to this position to select the cleaning cycle with the delay. Rotate the adjustment ring to reduce or increase the interval. In position S, the interval between the cheeks is greater, in the position F is less. In the intermittent operation mode of wipers, the cycle delay time also depends on the velocity of the car. With an increase in the velocity of the vehicle, the cycle delay time automatically increases.

LO - (Low speed): Continuous mode, low speed.

Lever into two positions up.

Hi - (High speed): Continuous mode, high speed.

Sodium lever position up.

Short-term inclusion

To turn on cleaners in the case of a small rain or fog, slightly lower the lever of the windshield cleaner / washer and release. When releasing the lever automatically returns to normal position. In this case, the brushes will work out one cycle.

Automatic mode (with rain sensor)

The rain sensor measures the amount of water on the windshield and automatically adjusts the operation of wipers. To enable automatic wiper mode, move the windshield cleaner / washer lever to the AUTO position. The sensitivity of this system is regulated by turning the rim lever / windshield wrath / washer. To turn off the automatic wiper mode, transfer the lever of the windshield cleaner / washer in the OFF position.

When the ignition lock is transferred to the assault wiper wipers automatically turn on once to check the system if the wipers lever are in the AUTO position. To ensure proper operation of the rain sensor in the working zone of the sensor there should be no dust and dirt. Cars S. installed sensor Rain can be determined by the working area of \u200b\u200bthe sensor at the top of the windshield. Wiper wipers do not work if the ACP gear selector is set to N ( neutral transmission) Or the vehicle speed does not exceed 5 km / h.

Windshield washer

To feed the jet of washing fluid on the windshield, do the following:

Turn the ignition lock to the assault position or ON.

Pull the lever of the windshield cleaner / washer.

If you hold the lever less than 0.6 seconds, then the following happens:

The windshield fluid is sprinkled on the windshield. (Wipers do not turn on.)

If you hold the lever longer than 0.6 seconds, then the following happens:

The washer fluid sprinkles on the windshield.

The wiper performs two cycles after the lever is released, and then another cycle in three minutes.

Cleaner / Player Glass Rear Door

To turn on the cleaner rear glass Translate the ignition lock to the assault position or ON and turn forward the end of the windshield cleaner / washer lever. The shift lever of the rear windshield cleaner has three positions:

OFF (OFF): The system is turned off, standard position.

INT (Intermittent mode): Intermittent wiper mode.

LO (Low speed): Continuous mode, low speed.

To submit a flush fluid stream to the rear window, press and hold the button on the end of the lever until the washers start working. After the button is released, the washer stops, but brushes will make three more cycles.

Rear microprocessor cleaner

To improve the rear view, the back door wiper will be automatically turned on when the reverse transmission is turned on when the windshield purifier is turned on.

headlight washer

The car can be equipped with headlight washers. Plans washers believes rubbish with lenses of near-light headlights.

To wash the headlights of the near light, press the washer button located on the left side of the dashboard, when the headlights are turned on. Washing fluid sprinkle on the headlights. The headlight washing system is then disconnected for two minutes. If the level of flushing fluid is low, the flushing system will not be available for operation for approximately four minutes after splashing.

Alarm button

Emergency light alarm is used in the following cases:

To prevent other participants in the Movement of Emergency Situation.

In case of danger on the road.

An emergency lighting alarm can be included both when the ignition is turned on and when the ignition is turned off. To turn on, press the emergency lighting button. To turn off the alarm, press this button again.

Rear window and exterior mirrors button

To turn on the heater, turn on the ignition and press the rear window heaters and exterior mirrors. The light indicator lights on the button. The heater automatically turns off after about 15 minutes. To turn off the heater manually, press this button again. Make sure the heater is turned off when the surfaces become clean.

Windshield heater

The car is equipped with a heated windshield that can be used to remove it. This feature works only when the ignition is on. Heated windshield is performed using a heating element located near the lower edge of the windshield. To turn on the heating of windshield, press the rear window heaters and outer mirrors. The indicator is lighting up in the button, which indicates that this function is turned on. Heated windshield turns off 15 minutes after pressing the button. It also turns off if you press the button for the second time or turn off the ignition.

To turn on the front light light, press the button.

To turn off, click the button again.

By pressing the button, you can turn off the upper beams (with an unheated button), the flaf on the front door and the turnkey hole signaling device.

Plafond on the front door

The ceiling on the front door turns on when the door is opened. If the door remains open for a long time, then the slab lamps are turned off after 10 minutes. After closing all doors, the ceiling is on for 10 seconds, then goes out. The flaf on the front panel can be turned off immediately by pressing the button located on the ceiling.

Sunglasses holder

To open the sunscreen holder, located behind the local lighting lantern, click on the back of the lid. For closing, lift the holder cover and press to snap.

Luke with electric drive

The inclusion of the electric drive in the roof is performed when the ignition is turned on.

Roof opening

To open the hatch, check the back switch. Luke will open automatically up to about 350 mm and will remain open until the switch will be rotated, backward or down. When re-translate the switch back, the hatch will open completely.

To close the hatch, press the switch and turn it forward, backward or down. To fix the hatch in the desired position, release the switch button.

Lock hatch in the roof

To raise the hatch, press the up switch up and hold in this position. To fix the hatch in the desired position release the switch.

To return the hatch to the original position, press the switch down and hold in this position. To fix the hatch in the desired position release the switch.

Digital Indication Clock

The clock with digital display shows the time if the ignition key is in the assault position or ON. On the clock there are three buttons for installation.

N is the clock setting button.

To transfer clocks for one hour ahead, press the N. button

To transfer the clock for more than one hour ahead, press and hold the H button before setting the desired value.

M - button setup minutes.

To transfer the clock for one minute, press the M. button

To transfer the clock more than one minute, press and hold the M button to install the desired value.

S - time setting button.

For rounding time until the nearest hour, press S.

If you press a button, for example, when the time ranging from 8:00 to 8:29, then the time will be set at 8:00.

If you click the button, for example, when the time in the range from 08:30 to 08:59, then the time will be set at 9:00.

Cigarette lighter and auxiliary electrical outlet

Using the cigarette lighter

Turn the ignition key to the assault position or ON.

Click on the cigarette lighter until you stop.

When heated to the required temperature, the cigarette lighter automatically pops up.

If the ignition key is in the Lock position or extracted from the ignition lock, the cigarette lighter can be used for 10 minutes or until the door is opened.

Electrical outlet for additional devices

Electrical sockets are designed to connect various electrical devices, such as a cell phone, an electric shaver, etc. Auxiliary electrical outlet is located behind the cup holders. Another socket is on the left side luggage compartment. Open the lid to use the socket. Close the lid if the socket is not used.

Portable ashtray

Seat heating switch

Seat heating switches are located under the central luggage compartment in the console.

To turn on the heating of the seat:

Turn on the ignition.

Press the preheater switch of the desired seat. The indicator lights up on the button.

To turn off the seat heating, press this switch again.

The indicator on the button will go out.

To open the glove box, pull up the bottom of the door handle lights up the backlight of the glove box.

To close the glove box tightly slaughters the door to the backlight of the glove box will go out.

To accommodate large items, the inner partition can be removed. After removal, install the inner partition in the groove on the left side.

Luggage compartment in console

Front luggage compartment in console

To open a nonsense compartment in the floor console, pull the lever and lift the lid.

To close the lid of the nonsense compartment, shut it and press it up.

Under the floor of the luggage compartment there is an additional compartment. To access this compartment, pull up the rug knob on the floor floor.

Luggage compartment

According to both sides of the luggage compartment on the floor there are special pallets.

Sun visors

To protect the driver and passengers from blinding the straight rays of light in the car there are soft sunscreen visors. Sun visors can be rotated up, down and to the side. A small mirror (on both sides) and the ticket holder (on the driver side) are located on the back of the sunscreen visor. After opening the mirror cover, the sunscreen visor signaling is ignited.

If the sunscreen visor in your car is removed, remove the visor from the central holder and start moving it from the side to the side.

Handrail with crochet for clothes

Over the front and rear passenger doors are the handrails. On the handwheel over each rear door there is a hook for clothes. For use, pull down and hold the handrail. After release, the handrail automatically returns up.

Passengers can take advantage when leaving and landing into a car or hold on with a dynamic movement.

Chevrolet Captiva was first introduced in 2004 at the Paris Motor Show. In 2006, its production began. Medium-sized crossover Designed by the South Korean department General Motors. Intrafavoric designation model C-100. In 2011, the updated version of Captiva C-140 was presented.

Engines

Chevrolet Captive Russian market It was supplied with two gasoline engines - 4-cylinder 2.4 liters (136 hp) and V6 3.2 L (230 hp). In general, both engines are quite reliable.

The younger 2.4 liters when running more than 60 - 90 thousand km often requires a thermostat replacement. This will be prompted by the arrow of the temperature pointer below the usual position. The new original thermostat costs about 2,000 rubles, analogue is about 1,200 rubles. After 100 thousand km begins to "hilt" the rear seals of the crankshaft.

Drive GDM mechanism on this engine belt. The first replacement is spelled out by the Regulation for 120 thousand km, but many services recommend this to 90 thousand km, followed by replacement every 60 thousand km. Multiple owners have encountered trouble - belt break and curved valves.

The engine of 3.2 liters has a timing chain drive. But it's not worth it to hope for his eternity. Pulling the chain when running more than 80 - 100 thousand km - a common phenomenon. At the same time, there are drops that rolled out 140 - 160 thousand km without chain problems. The first signs of the need to replace the chain - errors in on board computer And the reduction of the engine thrust. In this case, the motor continues to work steadily, without outside noise. Tightening with the replacement of the chain is not worth -wear of the further operation of the engines occurred by the chain per 1-2 teeth. More often, after that, it is possible to do with low blood, and the engine simply stops running. Official dealers in the post-warranty period are asked to work with spare parts from 40 to 60 thousand rubles. In the usual services for work will have to give about 10 thousand rubles, and components will require about 8 thousand rubles. Often requires replacement and oil pressure sensor. The original will cost 4 thousand rubles, analogue is about 1 thousand rubles.

Leak oils from under the valve cover or oil in candle wells - Frequent phenomenon for the engine 2.4 liters when running more than 30 - 60 thousand km. On the motor 3.2 this is less common.

Transmission

To reliability mechanical box The gears of Chevrolet Contributing does not arise. For the larger account "Avtomat" also does not cause complaints. But when there are more than 100 thousand km mileage, several owners were encountered with the advent of jerking after the box warp. In all cases, the intervention of specialists and the repair of the "automaton" was needed.

Current drives of the drives are a fairly common phenomenon on a pin with both types of gearboxes. On vehicles 2007 - 2008, a design defect of the internal gauge of the right drive of the displacement is found with the automatic transmission. Repair will require about 2.5 - 5 thousand rubles.

When running more than 60 - 80 thousand km, especially after long-term overcoming "off-road", often turns the cardan's suspended bearing in a rubber-based basis. This will prompt the vibration that appears at the initial moment of the start of the movement after the stop. Replacement faulty node It is made assembled with the cardan, the cost of which is about 35-40 thousand rubles, for used - about 20 thousand rubles. Many produce a replacement directly suspended, picking up analogue from other cars, such as BMW X5 or Sable.

Often begins to leak the gland rear gearbox. The original seals pull at 5-6 thousand rubles for a couple, work on their replace will cost 2 thousand rubles. Some chevrolet owners Captiva manages to choose an analogue from Toyota for 300 - 500 rubles per piece.

Chassis

Stands front stabilizer Start pounding after 30 - 40 thousand km. The original cost about 800 - 900 rubles, the analogs are twice as cheaper - 300 - 400 rubles. The front stabilizer bushings walk longer - 80 - 100 thousand km. When running more than 60 - 100 thousand km, it may be necessary to replace the front hub bearings (2.5 - 4 thousand rubles), which comes assembled with the hub. By the same time, the front shock absorbers can start tapping and "sweating". Silent blocks of levers are surreated in 100 - 120 thousand km.

Chevrolet Captiva steering rack often begins to knock on running more than 40 - 60 thousand km. By this time a knock may appear in the steering shaft cardan. Often there are leaks in the places of connecting the tubes of the GUR system. In the cold, there are cases of disrupting the hose of the hydraulic fusion hose, which can lead to the failure of the pump GUR (6-7 thousand rubles).

ABS sensors, especially the rear, often require replacement after 80 - 100 thousand km. New sensors official dealers are offered for 4500 rubles, in the auto parts store the original will be available for 3000 rubles, but you can find analogue for 800 rubles. The front brake pads go more than 30-50 thousand km (650 rubles per set). Rear brake pads serve more than 80 thousand km. Front brake discs more than 100 - 120 thousand km (2-3 thousand rubles per disk). Rear brake discs serve even longer (1.5-2 thousand rubles).

Other problems and malfunctions

The weak link of body iron Chevrolet Captiva rear trunk door, which can "bloom" in two or three years of operation. Over time, starts to "pass" and a chrome pad on the rear door. The emblem on the grille of the radiator is also often seated.

There may be problems with the motcher of the rear window washer. In addition, the hose of the sleeper fluid to the glass of the trunk doors in the back of Chevrolet Captive is often disconnected. The reason for hanging wiper brushes in the middle windshield The motors who refused the microswitch is becoming. Dealers offer a new motor for 8,000 rubles, but it is possible to revive it, replacing a faulty microswitch (300 rubles).

Problems with the Chevrolet Captiva electrician often occur due to bad contacts in the connectors or chain break. So the disappearance of the motor thrust and the sunbathing of the alarms may occur due to the "breaking" of the contacts on the engine control unit.

Indication of airbag fault lights up due to oxidation of connectors' contacts under the plastic overlay of the front and rear left threshold. Often it helps the simple procedure for reversing the connector under the front passenger seat.

When the fuel level indicators appears incorrectly, it is enough to check the connector under the gur tank, which goes to the fuse block. Sometimes the connector is guilty on the ECM block (engine controller).

Over time, the backlash can appear on the electric drive chairs. In addition, the armrest begins to creak between the front chairs.

Condensate can accumulate in the space between the roof and upholstery of the ceiling, flowing into the lighting plaffers either in the clips area of \u200b\u200bthe ceiling at the door of the trunk.

If you use the washer with a frozen liquid, the fuse in the block will definitely overload - under the left foot of the front passenger.

Problems may arise with the clock in the cabin that begin to shine or sneeze. "Officials" replace faulty hours to new ones. At the end of the warranty, specialists engaged in the repair of electrical engineering will be able to repair the clock for 500 rubles.

The reason for the sudden discharge of the battery becomes slowly "dying" diode bridge on the generator. The new officials offer it for 4-5 thousand rubles, on the side you can purchase analogue for 2.5 thousand rubles.

Conclusion

As can be seen, the serious problems of Chevrolet Captiva practically does not deliver. Basically, all the troubles are just "children's sores", get rid of which is easy.

The reasons why the old generation of Chevrolet Captiva does not start, are characteristic of the entire group of such cars. Therefore, we consider the reasons why the popular South Korean car may not begin.

Video

Video footage will tell why the contest does not start and eliminate the reasons

The reasons

Do not start Chevrolet Captiva in several probable reasons and indirect. So, many motorists can immediately think about the electrician, but the reasons are much more. Consider the main reasons for which the motor may not give a launch:

• Fuel system.
• Ignition.
• Akb and starter.
• Sensors and ECU.

Elimination methods

Before you begin consideration of troubleshooting options, it is worth saying that dIY repair It is possible in the event that the motorist has an idea of \u200b\u200bthe structural elements of the capita. Otherwise, a straight road to the car service and emptying the wallet.

Fuel system

The first option is the tornness of the fuel. It is worth paying attention to that, depending on the export region, different firmware apply. So, a low-quality or "bady" fuel, the computer will not be able to recognize that will result in the mass of errors inside the software. The result will be the fact that the car is simply not started.

Also, the reason, as in many cases, can serve the nozzles that clogged. At the same time, it is worth understanding that the cleaning of the elements will have to do in the car service. Usually the effect is first accompanied by trim or dialing.

Ignition system

The exit of one of the elements of the ignition system will result in the motor will cease to submit signs of life. So, we will not take into the calculation of the castle's malfunction - repaired and drove. But trifles in candles and high-voltage wires can lead to the fact that the starter will turn, and the engine will not start. It is necessary to diagnose the elements to make sure that they are operational.

The ignition module is another cause of a bad start, or not at all starting the motor. So, the change of the element will help. If, after all, the problem is really in the ignition, but the above elements are not suitable, then we are looking for trifles in the wiring.

Akb and starter

The battery village is the first place where malfunctions are searched. First we carry out the current strength of the current, and then pay attention to the wires to the starter that could oxidize or turn the rust.

Regarder, here a lot can be transferred to the reasons, but the main relays and the bendix remain the main. The output of the elements of the system will lead to the fact that the starter simply does not start the motor. Troubleshooting - repair or replacement of the node.

Immobilizer

Often, the cause of the "dead" engine became an immobilizer, which had to be repaired or change at all. Thus, long torments were usually crowned with success, but in this case, it is strongly recommended to turn to professionals.

Sensors and EBU

Often, this reason rarely leads to the fact that the motor cannot be launched. But there were such cases. The exit of the system of sensors or one of them will lead to the fact that the engine can not be started, and to look for which one has caused enough reason.

So, it is worth spending computer diagnostic With OBD II. If errors are identified, they should be decrypted and troubleshoot. After that, reset the indicators of the ECU and try to diagnose again. In case of failure, you can try to change the firmware.

Output

The reasons for which the Chevrolet cavity will be started quite a lot. The article has identified the most basic, but this is not a complete list. Since there is now optional equipmentSuch as an immobilizer, which can also block the start of the power unit.

Chevrolet Kaptiva Received the market in 2006 under the designation of the C100 and was produced in 2007, 2008, 2009, 2010. After restyling, both in design and in the whole platform and the labeling of the body became C140. Updated Chevrolet Saptiva was produced in 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019. We suggest familiarize yourself with information about the fuses and blocks of the Chevrolet Captive relay with a description of the schemes in Russian.

But it is located next to the washing liquid barrel and closed with a plastic lid.

C100.

Scheme

Description

C140.

General scheme

Decoding

Auxiliary fuse block in the engine compartment

Only diesel models. It is located in the center of the panel.

Scheme

Purpose

Block in Chevrolet Captive Salon

With the car's cabin, it is located from the left side of the passenger's feet, closed with a protective cover.

C100.

Scheme

Description

For the cigarette lighter responds the fuse number 29.

C140.

General scheme with description

Additional Information

In this video, it is clearly shown to address the problem of not working light lights by replacing the relay on chevrolet car SAPTIVA.

Manual

Did not find an answer to your question? Get more information about the operation of Chevrolet Captive Having studied the instructions: ""