Ford Focus Official Oil 3. Recommended Motor Oil for Ford Focus. List of oil requirements

Ford Focus 3 - a very popular car on russian market. The car has established itself from the best side not only due to its ride qualities, comfort and stylish design, but due to high reliability. In addition, the owners of such cars do not arise problems with independent service. And yet, in practice there may be questions even experienced motorists. This concerns large faults, and replace supplies. So, in the latter case, the most demanded procedure is the choice and replacement of engine oil. This task requires certain knowledge in theory, but on the other hand, is available for performing a garage method. Consider in detail how to choose the right oil, and how much to fill it into the engine Ford Focus 3.

This issue is often asked almost all the Ford Focus owners. The fact is that the oil change regulations may differ from the official regulation established by the manufacturer. After all, the frequency of replacement also depends on the operating conditions. So, under the influence of adverse climatic factors, oil comes into disrepair, and therefore it may be necessary to replace it before the deadline. The official replacement regulation for Ford Focus 3 is 20 thousand kilometers. It is relevant only for European countries with a favorable climate. IN russian conditions oil should be changed twice as much as it does not have time to lose their beneficial features. Thus, Russian motorists should be replaced every 10-12 thousand kilometers, or even earlier. For example, if the machine is constantly operated in light conditions off-road, and if an alternating climate is dominated with temperature drops, then the regulations can be reduced and at all up to 5-7 thousand km. The more often changing the oil, the better will affect the reliability of the engine.

Because of what other oil quickly comes in disrepair

In addition to climatic factors, there are other reasons for the urgent replacement of oil in the engine. Among them you can select frequent ride on high engine speeds, aggressive ride style, permanent ride at high speeds and sharp maneuvers. Ford Focus 3 - a car with good handling and brakes, and yet, with this style of driving, its details are subjected to colossal loads, as well as motor oil. Its properties lose their best useful actionand no longer able to effectively cool the parts and prevent overheating.

Signs of urgent oil replacement

To determine whether the engine oil is corrupted, for this you need to check its level. If on a measuring probe, the imprint of the oil has a dark shade, and stinks burners, it already indicates urgent replacement. The same applies if the fluid contains a metal chips, which is one of the reasons for mechanical wear.

Choose oil for Ford Focus 3

When selecting engine oil, various parameters should be taken into account, especially if the selection is given in favor of an analog oil. Whatever brand, the product must have the same specifications, like the original oil. For example, oil for Ford Focus 3 gasoline engines has a WSS-M2C948-B specification, as well as viscosity class 5W-20. It means that parameters should have original oil, as well as its analogue. So, among the last one of better options For Ford Focus 3 will be Castrol Magnatec. Professional E.

Concerning diesel enginesThe WSS-M2C913-C specification is provided for them, as well as viscosity class 5W-30.

Can choose among others famous brands, for example, LUKOIL, Mobile, Shell, Rosneft, ELF, ZEK and others.

View of oil

• Synthetic - very optimal option For Ford Focus 3. High flow rate, low-temperature resistance, good non-stick properties, the ability to effectively cool the parts are the key advantages of synthetic oil. Recommended for cars with small and big mileage.
• Mineral - the most affordable oil to date. It is suitable for cars with a large mileage, including for Ford Focus 3. In addition, it is worth it only in extreme cases, for example, if there is not enough money for clean synthetics. Moreover, such oil is not recommended for operation at low temperatures.
• Semi-synthetic oil - is a mixture of synthetic and mineral oils. This option is uniquely better than mineral product, but largely inferior to synthetic oil. Thus, semi-synthetic - a more decent alternative to mineral, rather than the synthetics.

It can be concluded that the synthetic oil is better suitable for FOCUS 3, and with a lack of funds - semi-synthetic.

How much to pour oils

The volume of filling fluid depends on the working volume engine Ford Focus 3.

For example, for 1.5 liter engines, 4 liters of fluids should be poured, 4.2 liters are recommended for motors with a volume of 1.6, and more than 5.6 liters of oil are poured into powerful 2-liter engines.

Finally, I must say that the maximum volume of oil can be pouring only with a complete replacement, that is, with a complex flushing of the motor. With a partial replacement, pour out full volume is not possible, since in this case the remains of the old oil will remain in the engine, including dirt and soot. Therefore, for a more efficient procedure partial replacement It is advisable to repeat 2-3 times, with an interval of 500-600 kilometers.

The third generation of the popular car from the Ford Concern was presented to the public at the Detroit Auto Show in 2010. Direct predecessor follower, Focus 3 used its modified platform in combination with a new "kinetic" design, characterized by the presence of broken lines, intricate curves of forms and sharp faces. In addition, the focus received an updated line of engines with different technical characteristics. Next will be considered which oil and how much to pour into these motors.

Under the hood of the sedan, hatchback and wagons are hidden the same power plants, but unlike Ford Focus II, now the basic equipment begins with a 105-strong 1.6-liter unit (before it was a 1.4 liter engine). Gamma power aggregates lost modification by 1.8 liters and now after 1.6 there is a 2 liter installation and 150 hp. In the asset. Engines have become more economical and consumed 100 km on average from 5.6 to 6.7 liters of gasoline in a mixed cycle. They work in a pair with MT or robotic box. The diesel version (140 hp) was available only until 2013, after which, due to the lack of demand, the manufacturer refused it.

In 2014, Ford conducted the restyling of Focus 3, as a result of which the car received improved equipment and updated exterior appearance (rear and front interlers), as well as new system Depreciation. In Russia, the novelty was supplied with 3 types of gasoline engines: one at 1.5 liters (150 hp) and two - by 1.6 (105 and 125 hp). According to the dynamics - the car with engine 1.5 takes the first hundred for 9.2 seconds (by 1.6 - for 12.4-13.2 seconds), maximum speed - 210 km / h. Today focus 3 devoid of simple versions and is a functional, solid and expensive purchase. Raising price by basic complete set He led to an increase in demand for the model in the secondary market.

Generation 3 (2010 - N.V.)

Ford Engine Focus 1.6l. Duratec Ti-Vct 16V Sigma 105 and 125 hp

• How many oil liters in the engine (total volume): 4.1 liters.
• Oil consumption per 1000 km.: Up to 200 ml.
• When changing the oil: 8000-10000

Engine Ford 2.0l. Duratec He GDI Ti-Vct 150 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-20, 5W-30
• How many litters of oil in the engine (total volume): 4.3 l.
• Oil consumption per 1000 km.: Up to 400 ml.
• When changing the oil: 10000

For 20 years, Ford Focus has been retaining popularity, being an unpretentious and reliable car. To ensure reliable operation of its engine, it is necessary to use engine oil, approved and recommended by the plant, or to upload a lubricant that has similar parameters.

Not only work depends on the correctness of this choice. power plant, but also the duration of the operation of the aggregate. In our rating review presented the best oils Self different manufacturers, the main parameters of which are optimally suitable for each SPECIAL ENGINE FORD FOCUS (in the territory of Russia, the largest distribution models with type motors Endura, Zetec-E, Duratec and Eco Boost (Fox) were obtained.

Best Synthetic Oils for Engine Ford Focus

Synthetic has the properties necessary for high-quality lubrication. modern engines, has a more reliable protection against oxidative processes and reacts little to high operating temperature inside the motor. Also an important feature of this category of lubricants is a large operating period, during which all the stated oil characteristics are preserved.

5 LUKOIL GENESIS ARMORTECH A5B5 5W-30

Best price category
Country Russia
The average price: 1 421 rubles.
Rating (2019): 4.6

The oil is created on a high-quality synthetic basis, reinforced whole set of highly active modern additives Duramax designed specifically for the ruler synthetic lubricants of this brand. As a result, the products have good lubricating properties, an antioxidant effect, does not fade even with extreme loads.

Practically none of the reviews has critical estimates of this oil. There is an affordable cost, efficiency of the motor, the lack of neoplasms in the oil system. Moreover, the existing deposits in the motor gently and gradually dissolve, and, without falling into the sediment, can be removed upon the next replacement of lubrication. As a result, the efficiency of the motor increases, the level of vibration and noise during operation without load is reduced.

4 Xenum OEM-Line Ford 913-D 5W30

Multi-level motor protection from wear
Country: Belgium
The average price: 2 888 rub.
Rating (2019): 4.8

High quality oil, low sulfate, sulfate, sulfur and phosphate inclusions, can be poured into diesel and gasoline engines Ford Focus car with appropriate tolerance. Provides minimal wrencies of friction pairs, the content of carboxylic acid esters (Esters) retains the oil film at high temperature loads, increases the operational cycle.

The reviews there are more economical operation of the motor, an excellent detergent effect, the engine launch in winter even with severe frosts does not cause difficulties. Complex selection of additives included in the engine xenum oils Increases the resource not only internal circulation, but also the exhaust system.

3 Mobil Super 3000 X1 Formula Fe 5W-30

Most popular oil. Best frost resistance
Country: Finland
Average price: 1 928 rub.
Rating (2019): 4.8

Worldwide motor mobil oils Provert itself as high quality and reliable products. By purchasing this lubricant for the engine of its Ford Focus, the owners can get to the frank falsification, whose properties are able to spoil the engine even the tractor. In numerous reviews full of high marks performance characteristics Mobil SuperAnd only the lack of decency in some sellers spoils the overall picture.

In general, oil provides reliable work in the economy At any time of the year, winter is not something unusual for the product developed in Finland. It can be successfully used in the northern regions of the country, with more severe climatic conditions. In addition, the lubricant reliably protects the engine from overheating, does not form a naiga and stops the corrosion processes inside the engine. The integrated effect of this oil inevitably leads to an increase in the motor test.

2 Castrol Magnatec Professional E 5W-20

Good high-tech oil, providing a long service life of the engine with regular timely replacements. The molecular structure of lubrication provides the coating of parts, especially intensifying in places of high energies (points of contact of friction pairs) and preventing direct contact. Even at large intervals in the engine operation, the molecular structure holds the required amount of oil on the working surfaces and provides lubrication of parts until the oil pump will create a working pressure in the system.

Many owners of Ford Focus cars began to pour this oil from the first days of operation, and in their reviews there are full satisfaction with its properties and high-quality operation of the motor. In the process of use, there was no formation in the engine of any deposits and there is not even a hint of their appearance.

1 Ford Formula F 5W30

Original oil. Stable viscosity
Country: England
The average price: 1 785 rub.
Rating (2019): 4.9

Made specifically for Ford automotive products, provides optimal conditions for the engine operation at any loads. The base lubrication base is obtained by the conventional hydrocracking method and thanks to the multi-stage cleaning system, it is not inferior in terms of the synthetic characteristics obtained from the gas. The surface of the parts inside the motor is covered with a sturdy oil film that reduces friction preventing premature wear Engine.

In the reviews of the Ford Focus owners, the stability of the oil viscosity is positively estimated, good fluidity with severe frosts, while improving the power of the motor and fuel economy. A set of high-quality additives ensures the stability of the oil structure - with high temperatures And long loads it does not dilute. Also has a good detergent effect without creating any deposits in the engine.

Best semi-synthetic oil for Ford focus

The semi-synthetic is actually a synthesized oil, diluted in different proportions of mineral. Temperature durability of such an oil is lower than that of clean synthetics, but the rest of the lubricant is perfectly coping with its task. Use looks more preferable in engines with great wear, but you can pour into modern motors. It should not be forgotten that the interval between replacements in this case will be less.

4 Comma X-Flow Type F 5W-30

Best price in the category. Increases the resource of the engine
Country: England
The average price: 1 610 rub.
Rating (2019): England

The peculiarity of this lubricant is the presence of an exclusive PCFINEUM package, which provides an excellent detergent and anti-corrosion effect. Thanks to the atomic inclusion of pH and Zn metals, the best slip indicators have been achieved, significantly reduced wear of parts during operation.

Ford Focus Owners characterize butter as reliable protection For motor. The reviews there is an improvement in the DVS dynamics, noise reduction during engine operation without load, fuel economy. When operating in the northern regions, Comma X-Flow has proven itself, providing a light launch in frosts, exceeding the mark in -30 ° C.

3 Motul 6100 Save-Lite 5W20

High level of chemical stability
Country: France
The average price: 2 500 rubles.
Rating (2019): 4.8

Another oil with the recommendations of the Ford manufacturer deserves to become a member of our rating. There are only two lack of this product - relatively high price And the opportunity to acquire under the guise of Motul 6100 his miserable parody. The latter simply obliges the owners of Ford Focus to be more educated when choosing a seller.

As for the cost, then against the background of how the engine is "rejoicing" with this oil, and with each subsequent replacement increasing its resource, the price looks quite justified. Low sulphate ash content, satisfactory washing and oxidative effect prevent the burnout of the lubricant at any loads. Chemical stability in high operating temperatures modern DVS Provides unsurpassed qualities and ensures reliable protection of the engine nodes.

2 LIQUI MOLY SPECIAL TEC F 5W-30

High level of detergent properties. Increased interval between replacements
Country: Germany
The average price: 3,675 rubles.
Rating (2019): 4.8

Butter of this brand does not need advertising - it is one of the leaders in the lubricant market asking high level Quality. Despite the fact that the base of this lubricant was created on a mineral basis, the deep distillation technology (hydrocracking) made it possible to achieve quality comparable to clean synthetics.

Special TEC has tolerance for use in Ford brand cars. The high alkaline oil indicator (10.3) does not leave the chance for corrosion and other oxidative processes inside the engine, prevents the formation of sediments and nagar. There is an increased operational period and stability of work in high-energy modern motorsthat is not entirely characteristic of lubricants of this category.

1 Ford Motorcraft SAE 5W30 Synthetic Blend

Best friction protection
Country: England
The average price: 1 729 rub.
Rating (2019): 4.9

Premium oil is created on a purest basis, which has passed a multi-step cleaning. Oil film is resistant to shift, oxidation and mechanical exposure. As a result, the phenomenal decline in friction, the increase in the power and resource of the engine. There is also a high level of detergent properties that support the purity of the lubricant system at the level of the new motor. To some extent, all these factors provide fuel economy.

Many owners constantly pour this oil into Ford Focus, especially since it is designed just for cars of this manufacturer. Lubricant has proven itself in completely different conditions of work. Available positive reviews From drivers who have been successfully used by Ford Motorcraft in the conditions of northern regions, rural areas (in off-road), as well as in ordinary urban conditions. Everywhere the oil copes well with the loads, retains its properties throughout the entire period of work.

The selection of lubricants is made taking into account the parameters of the auto motor and its technical characteristics. A poor quality or incorrectly selected machine leads to a set of negative consequences. We invite you to familiarize yourself with the requirements for recommended engine oil for Ford Focus.

Model 2000 release

According to the plant requirements, the Ford Focus Car Manufacturer preferably use Ford's branded lubricants or Motorcraft Formula E, having a viscosity indicator SAE 5W-30. In the absence of original motor lubricants Alternatively, it is allowed to pour autosals that have a viscosity indicator of SAE 5W-30, which meet the standards of Ford WSS-M2C913-B.

The selection of viscosity is made according to Scheme 1.

According to Scheme 1, it is recommended to apply liquids having a viscosity indicator SAE 5W-30. For the topping, the SAE 5W-30, 5W-40 or 10W-40 motor liquids correspond to the type of oil A1 / B1 (preferably) or A3 / B3, depending on the ambient temperature, can be used. It is forbidden to apply cars with a viscosity of 10W-40 if the air temperature is less -20 0 C.

1. ZETEC engines - SE 16V 1.4 l:

• 3.75 l, if we take into account the oil filter;
• 3.5 excluding the filtering device.

1. Motors ZETEC - SE 16V 1.6 L, ZETEC - E 1.8 L, ZETEC - E 2.0 L, DURATEC ST 2,0 L:

• 4.25 liters, considering the oil filter;
• 3.75 without oil filter.

1. DURATEC 8V 1.6 L:

• 4.2 l with oil filter;
• 3.7 without a filtering device.

1. Motors Endura-TDDI / DURATORG TDCI 1.8 l:

• 5.6 l, taking into account the oil filter;
• 5.0 liters excluding the filtering unit.

Ford Focus MK2 2004-2011

According to the Manual manufacturer Ford Focus recommended to use lubricants Composing characteristics:

• original motor ford oil either Motorcraft Formula E;
• the viscosity indicator SAE 5W-30.
• wSS-M2C913-B tolerances.

It is permissible to use alternative lubricating fluidscorresponding to the requirements of WSS-M2C913-B having a viscosity of 5W-30.

Also in the instruction manual of the Auto indicates the following information:

1. It is forbidden to pour oils having a viscosity indicator SAE 10W-40 if the ambient temperature is below -20 0 C.
2. In the absence of cars that meet the requirements of WSS-M2C913-B, it is recommended to use the SAE 5W-30 viscosity of the SAE 5W-30 viscosity. If there is no possibility to purchase recommended lubricants, you can pour fluids that have a viscosity of 5W-40 (except machines using FlexFuel fuel) or 10W-40, which according to ASA standards correspond to the class A1 / B1 or A3 / B3 oil. Preferably use A1 / B1.

The volume of lubricant required when replaced is:

1. Complete set 1.4 L Duratec-16v:

• 3.8 l with an oily filter even;
• 3.5 liters excluding the filtering unit.

1. Complete set 1.6 L Duratec-16v:

• 4.1 l with even oil filter;
• 3.75 liters without taking into account the filtering device.

Ford Focus MK3 2011-2017 release

From the instruction manual for auto-recommended engine oil for Ford Focus is determined by the type of engine. For engines working on gasoline, it is recommended to use Ford or Castrol motor oils with a viscosity of 5W-20 that meet the requirements of WSS-M2C948-B. As an alternative lubricant, except Engines 1.0 L ECO Boost (Fox), you can pour the 5W-30 viscosity of the 5W-30 viscosity corresponding to the requirements of WSS-M2C913-C. At the same time, preference is worth paying products. ford companies or Castrol.

In the absence of these lubricants, it is allowed as a top of the use of oils with a viscous indicator 5W-30, corresponding to the ASE ASA class A5 / B5.

The volume of engine oil required when replaced is:

1. For Motors 1.0 L Eco Boost (FOX):

• 4.1 liters with oil filter;
• 4.0 liters excluding the filtering device.

1. For autodware 1.6 L Duratec-16V-VCT-SIGMA:

• 4.1 l with oil filter;
• 3.75 liters without oil filter.

According to Manual Auto Ford Focus, for diesel power units. Ford or Castrol lubricants are recommended with a viscosity of 5W-30 that meet the requirements of WSS-M2C913-s.

Conclusion

Recommended Motor oil for Ford Focus has a positive effect on the operation of the machine engine, increases the operating period of the lubricant system. Therefore, it is important to choose a lubricant suitable for a specific engine type, given the temperature of the region in which the vehicle will be operated. It is not necessary to use fluids designed for summer at too low temperatures, and lubricants calculated for the winter, pour in heat. Buy all-season oils, it is possible if the ambient temperature difference corresponds to the all-season fluid operating temperatures.

Please note the permanent ride on motor oils recommended for the topping is prohibited. Such exploitation leads to a set of negative consequences:

• increase the number of harmful impurities in the exhaust gases;
• reduction of the efficiency of the automotive;
• increasing the consumption of fuel;
• reducing the starter resource.

Also consider the basic base of motor oils during lubrication selection. Synthetic and semi-synthetic fluids work with a wider temperature rangethan mineral.

Recommended motor oil for Hyundai Solaris. Recommended motor oil for Toyota Corolla

If you choose the car, drew attention to the Ford Focus 3 hatchback, you can hardly stay from such a cool purchase. Car owners of such a "iron horse" actively praise the car, focusing on its reliability, excellent specifications. The Ford's engine generally "battled", because it is an incredibly class unit. It can serve a very long time, if only sufficient attention to its prevention. The manufacturer accompanies every new car with warranty obligations, due to which during the warranty period oil, if necessary, change the specialists of the maintenance station.

For old cars Ford Focus 3, the engine oil should be replaced more often.

However, you need to tune in to the fact that after the expiration of the warranty period, the whole "care" about the car will fall on your shoulders. Therefore, you need to learn to exercise, understand how much oil pour into the engine of your favorite car "Ford Focus 3" hatchback. We are ready to act as a guide and organize you a kind of "informational excursion", to tell in detail about the process of replacing engine oil in the engine.

Change of oil

To learn how to make the most qualitatively intended manipulation related to the replacement of consumables, you can listen to our advice, and you can learn technical instructions manufacturer. Since we give you ready-made recommendations, you will not need to overclock the pages, you will need only carefully read all that we offer you.

When it is time to change

Motor oil fluid Does not merge just like that. There are certain rules, knowing which will be easy to calculate the moment when the sharp in Ford Focus 3 occurs. The manufacturer recommends navigate the two main parameters:

• the mileage of your "iron horse";
• auto operating time.

Initially, you should navigate exactly the first parameter. As soon as your car overcomes fifteen thousand kilometers, you will need to replace motor fluid.

However, everything is different in different ways. Some prefer to extremely rare trips, and others cannot live even the day without vehicle. Accordingly, with such operation, fifteen thousand kilometers can be traveled for several months. If you are also such a car owner, then you will need it once a year.

The "older" becomes a car, the more likely it is useful to replace the engine fluid, because it is negatively reflected in its technical condition:

• high humidity;
• strong gaspace;
• poor fuel quality;
• complex operating conditions;
• prolonged idleness in traffic jams (idling).

How to check the level and condition of the oil

Do not hurry to enter into a dispute with us, arguing that some of your acquaintances did such manipulations more often than once a year. This, indeed, possibly, but only at one of the conditions. In particular, if for some reason even a minor volume of oil fluid flows out of the car engine, you need to quickly fill such a shortage. This is very important, otherwise the engine of your "iron friend" is simply embarled. Believe me, it is hardly more difficult to repair the repair, you can hardly handle yourself. In addition, the repair will have to pay a large amount of money.

In front of the engine there is a special probe. It will first remove it, wipe dry, removing oil trails. After that, immerse the dipstick into the hole, immediately remove and pay attention to where the oil trail is located. It is very important that it is located between two marks that you can easily find on the surface of the probe. The lower mark indicates the minimum allowable amount of oil, and the upper one is maximum. If the oil trail turned out to be lower than the permissible volume, the missing amount should immediately attach.

What motor oil is better to choose

It should not be poured into Ford Focus 3, which pours into his car, for example, a neighbor in a garage, even if you know that it always acquires only the best quality materials. Different cars Prefer different engine oils. For this reason, you simply must remember which oil recommends the manufacturer to provide high-quality operation of the engine. Visiting a car shop, pay attention to the canisters with 15595e or 14e8ba numbers. If there are several of them, ask the consultant or read each canister yourself. You need to find the oil whose viscosity will be either SAE 5W30 or SAE 5W20.

Let us try to explain what the difference between these two engine oils. The 5W20 engine fluid has tolerances for use in the regions where cold winter days, and sultry heat. If you have often to exploit the car with strong freezers, then it is better to give preference to such an oil as SAE 0W20. But in conditions of constant excessive heat, it is better to acquire such a kind of engine fluid as SAE 5W30.

Canisters in auto shops can be different. If the volume of the engine of your car is 1.0, then it will be enough enough to purchase a four-liter canister. If the volume of the engine is 2.0, then it is better to take oil with a large margin because you need to pour more than five liters. Even the owners who are properly poured the engine with an ashol, will not accommodate only this consumable fluid. You need to get the recommended oil filter. In the manual to your car, it is easy to find a table, relying on which, given technical specificationsYou will find an option preferred to purchase a filter.

Features of the replacement

So, the process in the engine "Ford Focus 3" starts with a car run. It is important that the engine of your "horses" warms up well, allowing to increase the temperature and oil fluid itself. Preheated oil will be easier to flow, and the cold will be excessively pulled, so the process will become more complicated and can become difficult. After the run, drive the car to the pit, remove the boot, the crankcase protection. This will allow you to get to the filter, of course, you also remove it. Now you find drain plug, unscrew it and quickly substitute a predetermined container.

Everything needs to be done quickly, but extremely neatly. Do not forget that the oil is very hot, its splashes can provoke strong burns.

It is not recommended to immediately open the bay hole and remove the dipstick, as this will lead to an increase in the oil jet. Once the oil fluid stops flowing, tighten the drain hole, wipe all around it all around, only after that install new filter, After throwing the rubber ring.

Through the bay hole, pour the new oil, paying attention to the probe, so as not to fill the liquid or not provoke the deficit. When you find that the oil has reached the mark "Maximum", stop pouring the liquid, start the engine, allow it to work a little. The oil will warm up and disperse on the system. If after that you will find that the level has decreased, you will need to immediately add the missing number. This procedure ends.

So, you now have information, how to change the oil in the engine of the Ford Focus 3 engine. We hope that you from this minute will be the most caring owners, do not allow the worsening of the engine. We wish you a light replacement and pleasant trips.