Winter oil for Toyota Corolla. Recommended motor oil for Toyota Corolla. Best Synthetic Engine Oil Toyota Corolla

Automaker brand brand Toyota Corolla recommends the use of original synthetic oils of the manufacturer "Castrol Mobile" and many other well-known manufacturers. But today branded car services do not advise the use of European quality products. To deal with whom to give preference, first need to consider Japanese products for the brand Toyota Corolla.

Japanese oil is available entitled "Toyota", in most cases used in the domestic market. "Exxon Mobil" is the main manufacturer who cooperates and fills the spill of oil based on the contract system with Toyota Corporation.

There are many brands that, in turn, are produced at the same factory. For each view, various manufacturer's recipes are used. Before developing motor oils for Toyota Corolla, multiple scientific works were held. It was necessary for an impeccable indicator, taking into account the features of different types engines. All products of these brands have energy-saving properties and excellent quality.

Japanese engine oils for Toyota Corolla and their features

In order to come to choose which pour products into the engine engine, you need to study the advantages of all types of oils. Products for engine brand Toyota Corolla are able to perform 4 functions:

1. The Toyota brand original products contain additives that are attached to metal parts of different types of installations. If you still use the material for Toyota Corolla, then the result will be excellent. The car will not overheat, the details will easily slide.
2. The brand for Toyota Corolla contributes to reliable sealing of cylinders that have microcams. Allows you to maintain a compression that helps the engine does not lose power.
3. Another advantage is the excess of heat from the hot zone, which is in the engine part, dispelled in the radiator zone.
4. In engine oil, the Toyota manufacturer is the so-called detergent additives. They are able to clean the engine parts, preventing the formations that occur at high temperatures.

Motor oil Toyota brand has distinctive features. It contains more than seventy mineral substances, which in turn are responsible for the highest quality. It should also be noted that this product "Toyota Engine Oil" has several degrees of viscosity: OW-20, OW-30, 5W-30, 5W-40. OW-20 products have excellent indicators that are suitable for our Russian climate.

For proper selection Oils provide minimal fuel consumption. The original brand "Toyota" has a disadvantage that plays an important role. It lies in the low number of alkali. When using oils with a more enhanced alkalinity, the engine is able to cope with poorly made fuel.

How often should the engine oil for the Toyota Corolla brand

Change motor oil It is necessary with a frequency of about ten thousand kilometers of the car. But most often car owners produce a replacement of motor oil on five thousand.

To properly replacing the engine oil, it is necessary to use a vessel where the spent residues will merge. It must accommodate four liters. We will also need rubber gloves that will allow the hands do not burn due to the high temperature of the oil. In order to unscrew the oil filter, you will need a ribbon key.

Motor oil replacement process for Toyota Corolla:

1. It is necessary to put a car on the pit. The necessary tools distribute so that they are at hand.
2. If the machine was not started, then warm it. This is necessary so that the oil fluid be warmed and become more liquid.
3. Next, stop the car if the motor warms it.
4. Take the vessel and put under the draining.
5. Lost drain plug. The content will turn out.
6. Take a funnel and determine the oil bay hole. It is necessary to pour gradually.
7. After that, check the fill level using the probe.

Buying Toyota Corolla, the owners of the car, as a rule, do not bother to look into the service book and get acquainted with the manufacturer's recommendations on consumables. When the time is coming to the next, you have to decide which oil to pour into Toyota Corolla. It will not be unnecessary to recall that only high-quality oil should be poured into the engine, it is desirable from well-known brands and only at service centers, since only in this case the risk is significantly reduced to obtain a fake.

Toyota recommends the original Toyota oil for its cars.

The Japanese concern unequivocally recommends using in his cars own oil for Toyota motors. In all press releases, Toyota emphasizes that all oils it tests on its own engines, and in extreme conditions. Created specifically for Toyota cars, motor oils are distinguished by excellent quality and good characteristicswhich determine the optimal engine operation in all weather conditions.

Following the recommendations of the automaker and the advice of professional professionals, the best choice for the new Toyota Corolla engine is SAE 0W20. Being completely synthetically and having a viscosity of 0W20, this oil has unique properties and is distinguished by universality. It can be used for all types of engines at any time of the year.

Original toyota oil SAE 0W20 meets the highest requirements of the classifier of the American Oil Institute (API).

Loking parts in the engine have extremely small gaps, so the use of motor oil with stable low knitting characteristics avoids unnecessary friction losses. A detailed analysis of reviews of car owners of a popular model, considering a difficult dilemma, which oil pouring into Toyota Corolla, boils down to one - SAE 0W20 oil provides trouble-free start of the engine and in winter and in summer, and also contributes to an increase in the operation of the motor operation. By the way, the previous motor Toyota. Corolla 4zz-Fe allows you to pour oil with 5W30 parameters.

Proper oil and compliance with the timing of its replacement guarantee an increased engine resource.

As for the deadlines for the replacement of motor oil, it depends on the road and climatic conditions of the vehicle operation, driving manners of the motorist. Experienced professionals believe that oil can be replaced by 12-15 thousand km on gasoline vehicles. Taking into account that the operating conditions in Russia, as a rule, are considered everywhere, it is recommended to replace the oil after 10 thousand km. Run. As for diesel engines and motors with turbines, the recommendations are reduced to the change of oil every 7-8 thousand km.

Oil change implies a mandatory replacement oil filter. Do not forget that the filter plays the last role in normal circulation lubricant, so it should be selected consumables, following the recommendations of the car manufacturer.

mymirtoyota.ru.

7 Best Motor Oils for Toyota Corolla

Toyota Corolla is produced since 1991. During this time, the model has been repeatedly updated, maintaining popularity - the brand is listed in The Guinness Book of World Records as the best selling. When choosing a better oil for filling into the engine of this machine, you should consider the type power aggregate And know the requirements that manufacturer places for lubricant. In addition to the viscosity and frost parameter (SAE), it is very important to know the class of oil according to the standards of the API - it must necessarily comply with those that are allowed to use with this engine. It should take into account the fact that when running more than 100 thousand km. The wear of the inner parts of the motor is inevitable, the distance between the friction surfaces is increased, and motor oil is required with greater viscosity.

The following review includes the best oilssuitable for fill in different engines This car. The rating was compiled on the basis of the requirements of the plant, the characteristics of motor oils and the experience of using the owners of the Corollas of different years of release in their reviews.

The semi-synthetic is ideal for lubricating engines installed on old Toyota Corolla and cars whose motors have sufficient operational wear. All selected oils meet the requirements for the API and can be used in gasoline and diesel engines of cars of this brand.

3 ENEOS SUPER GASOLINE SL 5W-30

All-season viscosity and high frost resistance as it is impossible to suit the realities of our country. Good and reliable oil contains a set of Japanese additives with molybdenum disulfide, which reduces friction and contributes to the uniform distribution of lubricant over rubbing surfaces.

As a result, an increase in engine power is noted, an increase in its life. In the reviews, the driver's drivers point to magnificent energy-saving parameters that provide noticeable fuel savings, visible aback (no topping between replacements), stability at high loads and temperatures. It also notes the absence of any deposits inside the motor, even in the car constantly operated in the harsh conditions of urban traffic.

High quality base oil and professional additives allow this lubricant to carefully clean the inner space of the motor of deposits and prevent their formation, even at high loads. In addition, the lubricant has a magnificent enveloping ability, so that the start of the engine in the frost or after a long downtime practically does not cause any damage to rubbing items.

Using Mobis Super Oil in Toyota Corolla Motors, owners characterize it as good and reliable, leaving the engine with perfect internal purity and in excellent working condition. In the response of the owner fueling this oil for more than 2 years with regular replacements every 7 - 7.5 thousand km. It also marks its high efficiency.

This oil is created specifically for Japanese cars, the mileage of which exceeds 100 - 120 thousand km. Its feature is an additional set of additives, which includes air conditioning sealants (eliminate lubrication leaks). As a result of use, a better detergent effect and powerful protection of rubbing surfaces that increase the engine resource is provided. Higher viscosity basic oil (The magnitude of the index of this parameter is 170) ensures reliable filling of the increased space between the driving surfaces.

In his reviews, the owners of the car Toyota Corolla celebrate an improvement in the operation of the motor, restoring the functions of the glands and pads (small lubricant leaks stop), the oil consumption between the replacement procedures is significantly reduced at negative temperatures.

Clean synthetic - the lot of modern engines, which requires the best high-performance lubricant, resistant to high temperatures and oxidative processes. Good antifriction properties and the presence of detergent additives are the key to the long and reliable service of the motor. Below are consumables that are the best available today in the domestic market. Their characteristics fully comply with all the requirements of the plant, which means that these oils can be safely poured into the engine Corolla.

4 LUKOIL GENESIS ARMORTECH A5B5 5W-30

Patriotic oil It is not inferior to foreign brands with its quality, and the affordable price turns Genesis Armortech in a rigid competitor. Motor lubricant is suitable for cars Toyota Corolla with gasoline engines Not older than 2001. Excellent properties The synthetic gives a set of Duramax additives, allowing you to save fuel and protect the engine at large loads - the oil does not flow entirely into the pallet, always leaving a thin film between friction couples.

Owners in reviews indicate this lubricant as an excellent and more accessible substitution of import brands, the price of which is several times higher. Becoming Genesis Armortech, they initially more carefully controlled the operation of the motor. At the same time, the formation of a car was not observed, oil worked almost in full before the replacement, and the tank was not produced. Cleaning inside the engine was also at an altitude due to the good detergent properties of this engine oil from Russia.

Distinctive feature This oil is stability when working in conditions high temperatures. With large loads and severe heating, it does not change its properties, it remains stable to oxidizing processes and perfectly copes with its destination - to lubricate all the friction pairs in the car engine. High heat capacity and effective detergent additives protect the motor from overheating and previously educated sediments (in one working cycle is able to completely dissolve most accumulated sludge).

Reviews of owners positively evaluate the effect of oil on the state of the engine. When switching to Castrol Edge, the motor becomes quieter, work on idling - more stable, fuel economy is noted. Lubricant is excellent for Toyota Corolla E 120 gasoline engines and higher. You can pour this oil and in the car with a diesel engine, which came from the conveyor until 2002.

This is the best engine oil for Toyota Corolla cars, which was specifically designed for the Japanese Concern machines. It is suitable for use in almost all climatic zones (including the northern regions of the country) and is the guarantor of an increase in engine resource.

More easy to start the motor in frosts than on this oil, it is difficult to imagine. The developers from Exxon Mobil Corporation have created a unique product with better oxidation resistance indicators and a low level of heavy metal content in the exhaust gases. From the reviews of the owners who, from the moment of purchase, Toyota Corolla did not stop pouring this factory oil, aware of the noticeable engineering of the engine, its perfect internal purity (the presence of highly active washing additives), and high heat capacity, due to which the motor with extreme loads behaves smoothly and steadily .

In all its parameters, this oil complies with the requirements of the plant and can be used in Toyota Corolla gasoline engines with the year of release not older than 2001. In addition to the high level of environmental friendliness, oil contains active ingredients that prevent wear of rubber surfaces, a reduced level of sulfur and phosphorus, as well as low ash content (0.6) are prerequisites for the lack of reasons for the formation of slurry sediments inside the engine.

Excellent detergent additives are very sensitive to cope with the already educated lacquer flaw and until the next replacement are capable of clearing the motor from these harmful components. Ownership reviews celebrate the growth of engine efficiency, stable work For large loads. Resistance to oxidizing processes and high temperatures retains the claimed properties of engine oil at all time in the motor (provided that correct and timely replacement), And at the same time there is practically no need to draw.

Attention! The information presented above is not a guide to purchase. For any advice should be accessed to specialists!

markakachestva.ru.

Motor oil for Toyota Corolla: choice and replacement

Many car owners often think about what oil is better pouring into the Corolla. Options can be diverse, because in addition to the original lubricants there is a good choice of analogues of various quality and cost. Before buying, it is necessary to deal with the subtleties of choice.

What lubricant can come?

In the car's service book you can find information about which oil is suitable for the engine Toyota Corolla E150 or another model that is in your property. If you do not have a service book, pick up suitable lubricant You can with the help of a table that many motor oil sellers can offer.

Thanks to the catalog, you can find out for sure, you need your car synthetics or mineral liquid, which viscosity is suitable for it, and how much oil needs to be poured into your Toyota.

Original products Usually recommended by the factory, as they are optimally suitable for the engine, but such products are quite expensive, and if you buy it in an unverified place, there is a high risk of acquiring a fake. It is not necessary to buy only original oil, especially if you have a age car. It is enough to choose a similar viscosity and other lubricant parameters of any manufacturer to whom you trust, and the price of the products of which you are satisfied.

For example, for Toyota E 150 2008, the service book recommends pouring synthetic products whose viscosity can vary. Most drivers floods 10W-30 universal liquid, an engine oil, having a viscosity of 5W-30, -20, and rather rare 0W-20 suitable.

Gasoline engine 1.6, according to aPI specifications, Requires SL, SM engine oil. Products with such marking are suitable for cars 2001, 2003, 2006, 2010. However, it is worth paying attention to the fact that such marking is inherent only by old generations of lubricants. For cars 2012, 2013, 2014, 2015, the release of the same viscosity is applicable, but with SN marking. This is a new marking.

If your car was released from 2002 to 2011, and the old-type lubricants in your region are not available, you can safely acquire products with SN marking. For example, the oil for Toyota Corolla 2013 release manufacturer recommends 5W-30 SN. PI marking should be present for gasoline engines.

There are fluids sprinter, they are designed for small vans, sports cars, hide for Toyota Corolla 2013 release. The difference between such oils from ordinary lies in an improved formula, due to which the engine experiencing increased loads is better cooled, protected from rust and other unpleasant phenomena related to the operation of the car. Such oil is recommended for Toyota Corolla with turbocharging.

If the engine was released until 2013, the choice of oil should be focused on high anticorrosive and anti-wear properties, since old power units differ in thinner walls and need special protection. The products with SL marking, which has an improved formula. You can pour energy-saving products, they are well suited for generation 110.

Possible problems with high consumption of lubricating products

The engine level in the engine must be checked regularly. Ideally, the mark should hold in the middle. Consumption tolerances should not exceed a liter by 10 thousand km for a used car. If the car is eating lubricant, it is necessary to pay attention to the state of its power unit, most likely, it needs to be repaired.

For example, if the oil pressure sensor is constantly burning, it does not matter, generation 110 you or another model, it will not be superfluous to check not only level, but also the sensor itself. If you find that the car eats oil, for example, 1 thousand km went around the liter, it's time to repair the engine. Most often, Toyota eats if rings were worn and valve stem seals: Replacing them, you can get rid of the problem.

It happens that the oil pressure is normal, the rings are new, but the car still eats lubricating fluid in large quantities. In this case, you need to check the oil pump, especially if you used before it used a poor-quality engine product. In this case, it will be necessary not only to replace the unfamiliar part, but also full replacement Oils for better.

It is worth paying attention to the fact that a serviceable car may eat oil if it is low quality and viscosity its insufficient: such a substance is simply extruded through different slots, for example, can flow from-under the fill lid.

That is why, solving which oil pouring, it is not easy to save, acquiring cheap products of dubious quality. Repair and replacement of fluid on suitable will cost much more expensive.

How to change lubricant yourself?

Deciding which oil should be poured into the engine Toyota Corolla, you have to think about whether to change it in the car service or do it yourself. Many sellers make a mark-up on fluid, however offer them free replacement. If you do not want to spend time or do not have suitable conditions for self-substitutionYou can use the services of a car service, there you can tell you how much butter need. If products are offered on bottling, you do not have to overpay for unnecessary liters. It is worth paying attention to the fact that, together with the replacement of lubrication, the oil filter is changed. It should be purchased immediately.

If you want to replace liquids yourself, you can do it in a garage. To do this, you will need a pit or aleacade. Before replacing the car you need to warm up, for this it is enough to drive several quarters. After that, install the Toyota over the pit. Make sure that the car stood without inclination. It is better to work in gloves, since the fluid flowing will be hot. Prepare a suitable capacity of the appropriate volume into which you are a solid waste liquid, unscrew the drain plug: it is on the motor crankcase. Wait a few minutes until all the lubricant is somewhat, then replace the oil filter.

Tighten the cork back and proceed to replacing the liquid: fresh oil is poured through the neck, which is under the hood. Check the level: after it is in the middle, get the car, let me work for about a minute and check the fluid level again. If it is still not enough, a fraction. Before starting work, it is recommended to watch a video illustrating how it is done.

Conclusion

So, for the fill in the engine it is necessary to pick up a lubricant product of a certain type depending on different conditions. Do not forget how important it is for good work of the aggregate. Menuing the lubricant is completely under the power of each driver subject to the rules of this work.

clubMashin.ru.

Selecting the car for the summer or for the winter it is important to purchase a lubricant having an optimal viscosity suitable for the motor. Simplify the selection of lubrication, you can use the information set out in the auto operating instructions. The specified instruction describes the parameters of the recommended engine oil for Toyota Corolla.

Toyota Corolla E100 1991-2002 release

The selection of engine oil is performed taking into account the type of car engine.

Gasoline power units

According to this scheme for the winter, when the air temperature below + 80s is better to use motor fluids having a viscosity parameter 5W-30. The use of lubricants with a viscosity of 10W-30, 15W-40 or 20W-50 is advisable at a temperature indicator above -180c, at a lower temperature mode, the use of these oils will lead to a degraded motor start and increase the flow rate fuel mixes.

Scheme 2. Viscosity Dependency motor fluid From the temperature of the region in which the machine is operated (models equipped with gasoline engines since 1995).

* - Model 4A-GE.

** - besides model 4a-ge.

• 10W-30 pour at temperatures above -200s;
• 5W-30 is poured into the 4a-ge model if the thermometer is below + 100 ° C;
• in a wide temperature range, from -300c (and less) to + 400c (and greater) use 5W-30 (except for model 4a-GE).

Diesel Automotives

According to the manual for Toyota Corolla, it is recommended to use the type of CD oil, CE or CF according to the API classification. The viscosity of lubricants for models until 1995 release is selected according to Scheme 1, and for the complete sets since 1995, the selection of viscous parameters is performed according to Scheme 3.

Based on the data of the circuit 2, 10W-30 is used at temperatures above -200. Oil 5W-30 is used in regions with air temperature below + 100 ° C.

Filling volumes

The volume of engine oil between the marks "maximum" and "minimum" on the measuring probe is approximately 1 liter. Filling tanks for Toyota Corolla:

• 2.7 l with oil filter;
• 2.5 liters excluding the oil filter.

• 2.8 l with a filter replacement;
• 2.6 l without replacing the oil filter.

1. Autodware 5A-Fe, 4a-Fe (2wd):

• 3.0 l, taking into account the oil filter;
• 2.8 l without replacing the oil filter.

• 3.7 l with an oil filter;
• 3.5 without replacing the filtering unit.

• 3.0 l with a filter replacement;
• 2.8 l without changing the oil filter.

1. Power units 2C (until 1994):

• 4.7 liters with an oil filter;
• 4.2 liters without oil filter.

• 4.3 l with a filter replacement;
• 3.6 liters excluding the oil filter.

1. Power units 2C (since 1995 2WD):

• 4.1 l with a change of oil filter;
• 3.4 l without replacing the oil filter.

1. 2C engines (since 1995 4WD):

• 4.4 l with an oil filter;
• 3.7 liters without oil filter.

• 5.1 l with an oil filter;
• 4.4 liters without a filtering device.

1. 3C-E strength units (4WD):

• 4.9 with the replacement of the oil filter;
• 4.2 l without changing the oil filter.

Toyota Corolla E110, E111 1997-2002

According to the operation manual, the recommended motor oil for Toyota Corolla is selected by the type of engine. For power units 2E 1,3l, the brands of the CD, CE can be used, or CF in accordance with the API system or lubricants of a higher quality class. The recommended lubricant density is indicated in Scheme 4.

Scheme 4. Effect of air temperature on the selection of viscosity of the engine fluid for engines 2E 1.3l.

In accordance with Scheme 4, it is recommended that use lubricants 15W-40, 20W-40 and 20W-50, if the temperature beyond the car above -90s. With the thermometer indicator above -23,50s it is worth using liquids 10W-30, 10W-40 or 10W-50. If the temperature is less than + 80s, then it is recommended to pour 5W-30.

In the case of 4E-Fe power units, it is recommended to use SG, SF oil type or higher according to the API requirements. The viscosity of the engine fluid is selected according to the scheme 5.

According to Scheme 5 at temperatures below + 80s pour 5W-30. Machines 10W-30 are used when the temperature indicator is above -180s, and 15W-40 or 20W-50 pour, if the temperature is above 12.50c.

For 4zz-Fe engines 1.4 liters, Toyota Corolla need to use class oils not lower than SJ on the API system. You can also use energy-saving automation with the inscription on the Energy Conserving canister. The thickness of the recommended car is selected according to the scheme 6.

In a wide temperature range, the manufacturer is recommended to use 5W-30 lubricants. If the air temperature is higher than -180s, then the manufacturer is recommended to pour more thick oils 10W-30, 15W-40 or 20W-50.

Filling volumes

Volumes of engine fluid required when replaced is:

1. Automotors 2E 1,3l and 4E-Fe 1.3l:

• 3.2 liters with a oil filter replacement;
• 2.9 l excluding the oil filter.

• 3.7 l with the replacement of the oil filter;
• 3.5 excluding oil filter.

Toyota Corolla E120, E130 2001-2007

The manufacturer for Toyota Corolla is recommended to apply the original Lubricants "Toyota Genuine Motor Oil". The car manufacturer also allows the use of alternative oils corresponding to quality. Requirements for engine oil:

1. All-season SL or SM motor fluids by API classification with a viscosity of 20W-50 or 15W-40;
2. Machines with a viscosity of 10W-50 either 15W-40 class SL or SM according to the API classification with the inscription "ENERGY CONSERVING", which means energy saving.
3. Universal Lubricants Certified by ILSAC.

For selection of viscosity motor lubricant Use the scheme 7.

According to Scheme 7, the best choice for saving fuel mixture and good motor starting in cold weather there is a 5W-30 car. At temperatures above -180С, the manufacturer recommends applying motor oils with viscous indicators 10W-30, 15W-40 or 20W-50.

Filling volumes

Approximate amount of engine fluid necessary to raise the level between the lower and full level on the measuring probe is 1.5 liters. The volume of engine oil required by replacing is 4.2 liters, taking into account the oil filter and 4.0 liters without replacing the oil filter.

Toyota Corolla E140, E150 2006-2013

Gasoline power units

Recommended motor oil for Toyota Corolla is selected taking into account the type of car engine. For gasoline engines, it is recommended to use 15W-40 or 20W-50 viscosity with a viscosity of 15W-40 or 20W-50, the corresponding SL or SM categories over the API classification.

For 4zz-FE engines, the oils must match the SAE 10W-30 or 5W-30, also be certified by ILSAC and respond to SL "ENERGY CONSERVING" or SM "ENERGY CONSERVING". The selection of viscosity is performed according to the scheme 8.

Economy of fuel and good engine starting in cold weather promotes the use of 5W-30 viscosity. For regions in which the air temperature overboard the machine above -180s is permissible to fill lubricants 10W-30, 15W-40 or 20W-50. In the absence of 5W-30, it is permissible to pour 10W-30, but upon the next replacement it must be changed by 5W-30.

• viscosity 10W-30, 5W-30, 5W-20 or 0W-20;
• oil class SL "ENERGY CONSERVING" or SM "ENERGY CONSERVING";
• universal lubricants certified by ILSAC.

Selecting the viscosity of the lubricant for the 1ZR-FE engine, use the scheme 9.

According to Scheme 9, best option To save the fuel mixture and a good launch of an auto motor in cold weather there are 0W-20 lubricants. If this car is not available, it is allowed to use 5W-30 smear, but upon the next replacement it must be changed to 0W-20.

Diesel Automotives

For models 1nd-TV, ADE150L-AEFNYW and ADE150R-AEFNYW * It is necessary to use lubricants corresponding to the class B1 on the ASEA and type system oil API. CF-4 or CF. You can also apply CE classes and CDs in accordance with the API standards. The viscosity of the car is selected according to the scheme 9.

In the case of 1AD-FTV models (model ADE150L-AEFNXW *), it is necessary to upload the C2 oil class by ASA, in the absence of these lubricants, it is permissible to apply ASEA B1. To select the viscosity of lubricant, apply a diagram 10.

(*) - The model code is specified on the manufacturer's label.

Filling volumes

Filling tanks for Toyota Corolla:

• 4.2 l with oil filter;
• 4.0 l without replacing the oil filter.

• 4.2 l if consider filter;
• 3.9 liters excluding the oil filter.

• 4.3 l if consider filter;
• 3.8 liters without oil filter.

• 6.3 l with the oil filter replacement;
• 5.9 liters without replacing the oil filter.

Maximum oil consumption 1l / 1 thousand km. An exemplary volume of lubricant needed that its level occupied the average position between the upper and lower marker on the measuring probe is:

• 1.5 l for 4zz-Fe and 1ZR-FE engines;
• 1.8 l for 1nd-TV motors;
• 1.7 l in the case of 1AD-FTV power units.

Toyota Corolla E160, E170 since 2012 release

Gasoline Automotors

Manufacturer requirements for motor oil for Toyota Corolla:

• original motor fluids "Toyota Genuine Motor Oil" or other autosals corresponding in quality (possibly with the tolerances on the canister);
• viscosity of the car 0W-20, 5W-30, 10W-30 and SL Lubrication Class or SM "ENERGY CONSERVING";
• universal Motor liquid ILSAC with a viscosity of 15W-40;
• universal motor fluids Class SL, SN, SM by API classification.

The selection of viscosity is performed using the scheme 11.

According to Scheme 11, it is preferable to apply 0W-20 auto-20, if they are not allowed to pour 0W-30, which, upon subsequent replacement, it is necessary to change to 0W-20. When using 10W-30 or 15W-40 oils in cold weather (temperature below -180c), it is possible to increase the fuel consumption and deterioration of the motor start.

Diesel engines

Requirements for motor fluid:

• branded cars "Toyota Genuine Motor Oil" or alternative lubricants, relevant quality;
• c2 lubrication class by ASA.

When choosing viscosity, use a diagram 12.

Scheme 12. The dependence of the viscosity of the engine fluid on the air temperature.

According to Scheme 12, it is preferable to apply 0W-30 automal, they contribute to a decrease in fuel consumption. In the absence of the specified car, it is permissible to pour lubricants 5W-30, which, upon subsequent replacement, change to 0W-30.

Filling volumes

Volumes required when replacing a car:

• 3.4 l if consider filter;
• 3.2 liters without oil filter.

1. 1ZR-Fe, 2ZR-FE and 1ZR-FAE engines:

• 4.2 l with filter;
• 3.9 liters without oil filter.

1. 1nd-TV Avtomotors (Turkey):

• 3.9 l with oil filter;
• 3.5 l without filter;

• 3.7 l with an oil filter;
• 3.3 liters without oil filter.

Conclusion

The motor lubrication consumption in the engine depends on the quality and viscosity of the lubricant. Recommended motor oil for Toyota Corolla has optimal parameters, ensures the protection of the motor from overheating in the heat and the start of the power unit without warming up in cold weather. When operating a car, consider that even the recommended car can dilute, so at a frequent operation of the car in extreme conditions it is worth producing more frequent shift lubricantthan indicated in the regulations.

Selecting the car for the summer or for the winter it is important to purchase a lubricant having an optimal viscosity suitable for the motor. Simplify the selection of lubrication, you can use the information set out in the auto operating instructions. The specified instruction describes the parameters of the recommended engine oil for Toyota Corolla.

Model 1995 release

The selection of engine oil is performed taking into account the type of car engine.

Gasoline power units

According to this scheme for the winter, when the air temperature is below +8 0 with better use motor fluids having a viscosity parameter 5W-30. The use of lubricants with a viscosity of 10W-30, 15W-40 or 20W-50 is suitable at a temperature indicator above -18 0 C, at a lower temperature mode, the use of these oils will lead to a degraded starting of the motor and increasing the fuel mixture consumption.

* - Model 4A-GE.

** - besides model 4a-ge.

• 10W-30 pour at temperatures above -20 0 s;
• 5W-30 is poured into the 4a-GE model if the thermometer is below +10 0 s;
• in a wide temperature range, from -30 0 s (and less) to +40 0 C (and more) Apply 5W-30 (except for model 4a-ge).

Diesel Automotives

According to the manual for Toyota Corolla, it is recommended to use the type of CD oil, CE or CF according to the API classification. The viscosity of lubricants for models until 1995 release is selected according to Scheme 1, and for the complete sets since 1995, the selection of viscous parameters is performed according to Scheme 3.

Based on the diagram 2, at temperatures above -20 0 ° C use 10W-30. 5W-30 oils are used in regions with air temperature below +10 0 C.

Filling volumes

The volume of engine oil between the marks "maximum" and "minimum" on the measuring probe is approximately 1 liter. Filling tanks for Toyota Corolla:

1. Engines 2E and 3E:

• 2.7 l with oil filter;
• 2.5 liters excluding the oil filter.

1. Motors 4E-Fe or 5E-Fe:

• 2.8 l with a filter replacement;
• 2.6 l without replacing the oil filter.

1. Autodware 5A-Fe, 4a-Fe (2wd):

• 3.0 l, taking into account the oil filter;
• 2.8 l without replacing the oil filter.

1. Power units 7A-Fe:

• 3.7 l with an oil filter;
• 3.5 without replacing the filtering unit.

1. 4A-GE engines:

• 3.0 l with a filter replacement;
• 2.8 l without changing the oil filter.

1. Power units 2C (until 1994):

• 4.7 liters with an oil filter;
• 4.2 liters without oil filter.

1. 2C (from 1994 to 1995):

• 4.3 l with a filter replacement;
• 3.6 liters excluding the oil filter.

1. Power units 2C (since 1995 2WD):

• 4.1 l with a change of oil filter;
• 3.4 l without replacing the oil filter.

1. 2C engines (since 1995 4WD):

• 4.4 l with an oil filter;
• 3.7 liters without oil filter.

1. Motors 3C-E (2WD):

• 5.1 l with an oil filter;
• 4.4 liters without a filtering device.

1. 3C-E strength units (4WD):

• 4.9 with the replacement of the oil filter;
• 4.2 l without changing the oil filter.

Toyota Corolla E110, E111 1997-2002

According to the operation manual, the recommended motor oil for Toyota Corolla is selected by the type of engine. For power units 2E 1,3l, the brands of the CD, CE can be used, or CF in accordance with the API system or lubricants of a higher quality class. The recommended lubricant density is indicated in Scheme 4.

In accordance with Scheme 4, it is recommended that use lubricants 15W-40, 20W-40 and 20W-50, if the temperature beyond the car above -9 0 C. With the thermometer indicator above -23,5 0 C is worth using liquids 10W-30, 10W -40 or 10W-50. If the temperature is less than +8 0 s, then it is recommended to pour 5W-30.

In the case of 4E-Fe power units, it is recommended to use SG, SF oil type or higher according to the API requirements. The viscosity of the engine fluid is selected according to the scheme 5.

According to Scheme 5 at temperatures below +8 0 s puff 5W-30. Machines 10W-30 are used when the temperature indicator is above -18 0 C, and 15W-40 or 20W-50 pour, if the temperature is above 12.5 0 C.

For 4zz-Fe engines 1.4 liters, Toyota Corolla need to use class oils not lower than SJ on the API system. You can also use energy-saving automation with the inscription on the Energy Conserving canister. The thickness of the recommended car is selected according to the scheme 6.

In a wide temperature range, the manufacturer is recommended to use 5W-30 lubricants. If the air temperature is higher than -18 0 s, then the manufacturer is recommended to pour more thick oils 10W-30, 15W-40 or 20W-50.

Filling volumes

Volumes of engine fluid required when replaced is:

1. Automotors 2E 1,3l and 4E-Fe 1.3l:

• 3.2 liters with a oil filter replacement;
• 2.9 l excluding the oil filter.

1. Motors 4zz-Fe 1.4l:

• 3.7 l with the replacement of the oil filter;
• 3.5 excluding oil filter.

Toyota Corolla E120, E130 2001-2007

The manufacturer for Toyota Corolla is recommended to apply the original Lubricants "Toyota Genuine Motor Oil". The car manufacturer also allows the use of alternative oils corresponding to quality. Requirements for engine oil:

1. All-season SL or SM motor fluids by API classification with a viscosity of 20W-50 or 15W-40;
2. Machines with a viscosity of 10W-50 either 15W-40 class SL or SM according to the API classification with the inscription "ENERGY CONSERVING", which means energy saving.
3. Universal Lubricants Certified by ILSAC.

To select the viscosity of motor lubrication, the scheme 7 is used.

According to Scheme 7, the best choice for saving fuel mixture and good motor starting in cold weather there is a 5W-30 car. At temperatures above -18 0, the manufacturer recommends applying motor oils with viscosity indicators 10W-30, 15W-40 or 20W-50.

Filling volumes

Approximate amount of engine fluid necessary to raise the level between the lower and full level on the measuring probe is 1.5 liters. The volume of engine oil required by replacing is 4.2 liters, taking into account the oil filter and 4.0 liters without replacing the oil filter.

Toyota Corolla E140, E150 2006-2013

Gasoline power units

Recommended motor oil for Toyota Corolla is selected taking into account the type of car engine. For gasoline engines, it is recommended to use 15W-40 or 20W-50 viscosity with a viscosity of 15W-40 or 20W-50, the corresponding SL or SM categories over the API classification.

For 4zz-FE engines, the oils must match the SAE 10W-30 or 5W-30, also be certified by ILSAC and respond to SL "ENERGY CONSERVING" or SM "ENERGY CONSERVING". The selection of viscosity is performed according to the scheme 8.

Economy of fuel and good engine starting in cold weather promotes the use of 5W-30 viscosity. For regions in which the air temperature overboard the machine is higher than -18 0 with permissible to fill lubricants 10W-30, 15W-40 or 20W-50. In the absence of 5W-30, it is permissible to pour 10W-30, but upon the next replacement it must be changed by 5W-30.

• viscosity 10W-30, 5W-30, 5W-20 or 0W-20;
• oil class SL "ENERGY CONSERVING" or SM "ENERGY CONSERVING";
• universal lubricants certified by ILSAC.

Selecting the viscosity of the lubricant for the 1ZR-FE engine, use the scheme 9.

According to Scheme 9, the best option for saving the fuel mixture and good launch of the auto motor in cold weather is 0W-20 lubricants. If this car is not available, it is allowed to use 5W-30 smear, but upon the next replacement it must be changed to 0W-20.

Diesel Automotives

For 1nd-TV models, ADE150L-AEFNYW and ADE150R-AEFNYW *, it is necessary to use lubricants corresponding to class B1 according to the ASE system and the type of oil CF-4 or CF oil. You can also apply CE classes and CDs in accordance with the API standards. The viscosity of the car is selected according to the scheme 9.

In the case of 1AD-FTV models (model ADE150L-AEFNXW *), it is necessary to upload the C2 oil class by ASA, in the absence of these lubricants, it is permissible to apply ASEA B1. To select the viscosity of lubricant, apply a diagram 10.

(*) - The model code is specified on the manufacturer's label.

Filling volumes

Filling tanks for Toyota Corolla:

1. Automotive 4zz-Fe:

• 4.2 l with oil filter;
• 4.0 l without replacing the oil filter.

1. Motors 1Zr-Fe:

• 4.2 l if consider filter;
• 3.9 liters excluding the oil filter.

1. 1nd-TV strength units:

• 4.3 l if consider filter;
• 3.8 liters without oil filter.

1. Movers 1ad-FTV:

• 6.3 l with the oil filter replacement;
• 5.9 liters without replacing the oil filter.

Maximum oil consumption 1l / 1 thousand km. An exemplary volume of lubricant needed that its level occupied the average position between the upper and lower marker on the measuring probe is:

• 1.5 l for 4zz-Fe and 1ZR-FE engines;
• 1.8 l for 1nd-TV motors;
• 1.7 l in the case of 1AD-FTV power units.

Toyota Corolla E160, E170 since 2012 release

Gasoline Automotors

Manufacturer requirements for motor oil for Toyota Corolla:

• original motor fluids "Toyota Genuine Motor Oil" or other autosals corresponding in quality (possibly with the tolerances on the canister);
• viscosity of the car 0W-20, 5W-30, 10W-30 and SL Lubrication Class or SM "ENERGY CONSERVING";
• universal Motor liquid ILSAC with a viscosity of 15W-40;
• universal motor fluids Class SL, SN, SM by API classification.

The selection of viscosity is performed using the scheme 11.

According to Scheme 11, it is preferable to apply 0W-20 auto-20, if they are not allowed to pour 0W-30, which, upon subsequent replacement, it is necessary to change to 0W-20. When using 10W-30 or 15W-40 oils in cold weather (temperatures below -18 0 C), an increase in fuel consumption and deterioration of the motor start-up.

Diesel engines

Requirements for motor fluid:

• branded cars "Toyota Genuine Motor Oil" or alternative lubricants, relevant quality;
• c2 lubrication class by ASA.

When choosing viscosity, use a diagram 12.

According to Scheme 12, it is preferable to apply 0W-30 automal, they contribute to a decrease in fuel consumption. In the absence of the specified car, it is permissible to pour lubricants 5W-30, which, upon subsequent replacement, change to 0W-30.

Filling volumes

Volumes required when replacing a car:

1. 1NR-FE motors:

• 3.4 l if consider filter;
• 3.2 liters without oil filter.

1. 1ZR-Fe, 2ZR-FE and 1ZR-FAE engines:

• 4.2 l with filter;
• 3.9 liters without oil filter.

1. 1nd-TV Avtomotors (Turkey):

• 3.9 l with oil filter;
• 3.5 l without filter;

1. 1nd-TV (except Turkey):

• 3.7 l with an oil filter;
• 3.3 liters without oil filter.

Conclusion

The motor lubrication consumption in the engine depends on the quality and viscosity of the lubricant. Recommended motor oil for Toyota Corolla has optimal parameters, ensures the protection of the motor from overheating into the heat and start the power unit without warming up in cold weather. When operating a car, consider that even the recommended car can dilute, so at a frequent operation of the vehicle in extreme conditions it is worth producing more frequent shift of lubrication fluid than specified in the regulations.

Home ... Repair and Service

Automaker recommends using Toyota Corolla's original Toyota Genuine Motor Oil API (Toyota Engine Oil) and products of well-known global manufacturers, such as Castrol Mobil. And others. But in the company's car services recently, European products are not advised. To figure out which of the Soviets is better to follow, you need to consider Japanese Toyota's Japanese oils in more detail.

What is the Toyota motor oils

Japanese OEM oil produced under the Toyota brand is mainly intended for the domestic market. The manufacturer is Exxon Mobil, which is engaged in a contract with a Toyota autocorption contract ( this brand. Motor oils are known under the brand Castle).

All the brands of oils are produced on the same plants, but various recipes are used: for the manufacture of the Toyota 0W20SMI brand 5W30SM uses a Mobile formulation, and for the 5W20SL - ESSO brand. When developing this product, numerous research work was carried out to provide her impeccable indicators and take into account the features different engines. All these brands have excellent quality and provide high energy-saving properties.

Features of Japanese engine oils

To decide which oil pour into the engine of your car, you should familiarize yourself with the advantages of each of them. Engine oils manufactured under the Toyota brand perform four main tasks:

Lubrication of rubbing surfaces

Toyota antifriction additives contained in the original goods form on metal parts of various types power plants Very subtle, but sufficiently strong film. If you pour into the engine of the car, this product is this product, the result will be a slight slip of different parts, no overheating, scaling, as well as the jamming of the engine elements.

Reliable seal

On the walls of cylinders and pistons are microscopic gaps. Toyota oil reliably seals them, thereby allowing good compression and not lose the engine power.

Cooling

This is another advantage, because of which many car owners prefer to pour into the engine the production of Toyota. It can easily remove excess heat from very hot zones in the engine, after which it dissipates it in the radiator.

Ensuring the cleaning of engine parts

In engine oils of this manufacturer, detergent additives are contained, which, in addition to cleaning the parts of the engine, prevent the formation of various abrasive sediments on their surface due to high temperatures. It helps support components and engine nodes in optimal purity.

Toyota Motor Oil Characteristics

All Japanese engine oils are distinguished by the following characteristics:

• they are hydrocracking, they consume from 70 to 90% of mineral substances;
• their quality answers enough high level;
• they are designed specifically for Toyota's power plants;
• this product has good temperature indicators and is suitable for operation in the conditions of Russian cold;
• the friction modifier contained in them provides quiet and even work in the economy;
• properly chosen engine oil Toyota reduces (truth, slightly) fuel consumption;
• at prices, Japanese products benefit from European analogues.

Despite the good quality, the original products of Toyota has one important drawback, namely a low alkaline number. The use of high-alkalinity oils allows the engine to cope with poor-quality fuels, but requires the use of more additives, and this, in turn, increases the rally residue.

What frequency should be replaced by oil change in Toyota Corolla cars?

The frequency of replacement of motor oil of European manufacturers is every 10 thousand mileage kilometers. But car owners often reduce this period, preferring to replace the engine in the engine for 5-7.5 thousand. This is due primarily to the low quality of motor oils sold in our country.

Original products Japanese production is recommended to change every 5, and in winter 4-4.5 thousand kilometers.

corollafan.ru.

Motor and transmission oils for Toyota Corolla

Toyota Corolla keeps a record for the number of instances released among all car models - more than 40 million Corolla eleven generations have left the conveyor. Corolla is produced since 1966 and first was represented only on japanese market. Over time, the model has become global and gained popularity around the world, mainly due to its reliability.

Replacing oil in Toyota Corolla should be made in accordance with the instructions of the instruction manual. Which oil to fill in the Toyota Corolla engine depends on the year of the car and the engine type.

Toyota Corolla with gasoline engines up to the ninth generation inclusive (until 2008)

Motor oils of standards ACEA A3 / B4 and API SL are suitable for cars. Total specialists recommend Total Quartz 9000 5W40 and Total Quartz 9000 Energy 0W30, which meet these specifications. These oils reliably protect the engine from wear under any conditions, including at low-temperature start, and, due to the high oxidation resistance, can be used with a larger replacement interval (see instruction manual for your car). Both oils are also suitable for Corolla and Auris 10 generation with a 1.6 Valvematic Dual VVT-i gasoline engine.

Total Quartz 9000 5W40 Total Quartz 9000 Energy 0W30

Toyota Corolla and Auris with gasoline engines 10 and 11 generations (since 2006)

Motor oils for Toyota Corolla last generations must comply with the ILSAC GF-5 standard, which regulates the characteristics of the engine protection from wear and energy saving. Total Quartz 9000 Future GF-5 was designed specifically for these requirements and showed excellent results During tests for compliance with the GF-5 specification. Fuel consumption based on test results was below the prescribed standard by 3.1%, and the wear of engine parts is 70%. In addition, due to the reduced phosphorus content in the composition of this oil protects the exhaust cleaning systems and guarantees low emissions harmful substances in atmosphere.

Total Quartz 9000 Future GF-5 0W-20

Toyota Corolla and Auris with diesel engines

When selecting oil for Toyota Corolla with a diesel engine, you need to pay attention to the presence or absence in the car squeeze filter (DPF). Save filters are very sensitive to content in the exhaust of solid particles, so require the use of motor oils of the Low SAPS category with a low value of sulphate ash content, and a reduced phosphorus and sulfur content. Total Quartz Ineo First 0W-30 and Total Quartz Ineo Ecs 5W-30 possess the Total Quartz Ineo ECS 5W-30 in the Total QUARTZ INEO ECS 5W-30. These oils comply with the ACEA C2 standard and provide high wear protection, and also contribute to a decrease in fuel consumption.

Total Quartz Ineo First 0W30 Total Quartz Ineo ECS 5W-30

For diesel vehicles without a diesel filter suitable oil Total Quartz 9000 Future NFC 5W-30, manufactured by synthetic technology and corresponding to international standards API SL / CF and ACEA A5 / B5. This oil During tests, fuel consumption was shown 3.3% below the reference value, and the wear of the engine parts is 30% lower than the requirements of ACEA. High oil resistance to oxidation makes it possible to use it for a long time under any operating conditions.

Total Quartz 9000 Future NFC 5W-30

Transmission oils for Toyota Corolla

The oil in the Toyota Corolla automatic transmission must comply with the Toyota T-4 approved by the manufacturer. Liquid for automatic transmissions Total Fluide XLD FE has the approval of T-4 and ensures the correct and long-lasting operation of the automatic transmission. It protects the gearbox from wear and deposits and, due to improved friction properties, provides smooth switching.

Total Fluide XLD Fe

For Toyota Corolla cars, Total Transmission SYN Fe 75W90 transmission oils (for Corolla up to 9 generations inclusive) and Total Transmission BV 75W80 (for Corolla and Auris 10 and 11 generations) are suitable. Thanks to high lubricating properties, they provide reliable protection Details of the transmission even at high loads and are suitable for any operating conditions.

Total Transmission BV 75W80 Total Transmission SYN FE 75W90

Learn more about motor and transmission oils Total.

See also:

www.total-lub.ru.

What oil to fill in the engine Toyota Corolla

The choice of engine oil is largely affected by work and durability. car EngineTherefore, this issue is to come seriously. IN light car Motor oil is necessary for lubricating all parts of the engine, reduce the detrimental effects of friction, cooling the mechanisms of the power unit and removal from the wear system.

In this article, we will analyze what oil to pour into the engine Toyota Corolla when to do how to determine the optimal level of fluid and check the volume of fluid in the system.

Toyota Corolla E120: What oil pour into the engine?

The manufacturer is recommended for use Original engine oil Toyota Corolla - Toyota Genuine Motor Oil API Specifications (Toyota Engine Oil). This oil corresponds to global API and ACEA standards. The product refers to the synthetic category. It is also allowed to apply the analogues of known oil manufacturers (for example, Castrol).

Oil in Engine Corolla 2006

SAE viscosity:

• Winter: 0W-40, 5W-40,
• Summer: 20W-40, 25W-40,
• All-season: 10W-40, 15W-40.

API class:

• Gasoline Motors: SL,
• Diesel motors: CI-4.

Semi-synthetic oil.

What oil pour into the engine Toyota Corolla 2007?

SAE viscosity:

• Winter: 0W-30, 0W-40,
• Summer: 20W-40, 25W-40,
• All-season: 10W-40, 15W-40.

API class:

• Gasoline Motors: SM,
• Diesel motors: CI-4.

Semi-synthetic oil.

Oil into the engine Toyota Corolla 2008

SAE viscosity:

• Winter: 0W-40, 5W-40,
• Summer: 20W-40, 25W-40,
• All-season oil: 15W-40.

API class:

• Gasoline Motors: SM,
• Diesel motors: CI-4.

Semi-synthetic oil.

Fit mobil oils, G-Energy, Valvoline, Kixx, Zic, Lukoil, Xado.

Original Motor Oils Production Toyota

Toyota's original oil is performed only on the homeland of the brand - in Japan. 5 l packs are produced; 4.2 l; 1.5 l; 1.2 l, 1l and canisters 20 liters. Selects several lines of engine oils from a premium segment to more economical options.

Original engine oils perform the following functions:

• The lubrication of the surfaces of the engine parts and the decrease in the indulgence of friction force on them - this effect is achieved due to antifriction additives contained in oil, which create a special film that protects them on the surfaces of parts premature wear. Thanks to the same lubricant, the engine parts are protected from overheating.
• Sealing available microcamials on the walls of pistons and motor cylinders - due to its structure, the Toyota oil production effectively seals all available gaps and creates excellent compression, helping to maintain the optimal power of the power unit.
• Cleaning the parts of the motor and protection against the accumulation of abrasive sediments - in the process of production in oil, special detergents are added to the oil, they not only effectively clean the elements of the engine, but also prevent the formation of deposits in the future.
• Effective cooling - oil in the circulation process successfully takes over heat out motor compartment and distinguishes heat into the cooling radiator.

Which oil is better to pour into the engine Corolla?

Toyota oils are great for the motors of this manufacturer. Characteristics of oils allow them to keep their work properties even in harsh russian conditions And ensure the uninterrupted operation of the engine throughout the service life of the engine oil.

The main characteristics of Toyota oils:

• Toyota hydrocracking fluids - that is, at 70-90%, they consist of mineral substances.
• Oils are created with the calculation on a wide temperature Range And perfectly show ourselves in cold Russian frosts.
• The quality of liquids complies with world standards.
• Special antifriction additives and friction modifiers allow the motor to work without failures and practically silently.
• Competently chosen engine oil will give the opportunity to reduce the consumption of fuel.
• Original Toyota oils are cheaper than European counterparts.

Despite the listed advantages, Toyota oils also have one significant drawback - fluids are characterized by low alkali content. Such oils are poorly coped with low fuel quality, while liquids containing a large number of alkali copble with poor-quality flammable more efficiently. True, in the second case, the amount of ash residue increases.

Oil volume in Engine Corolla E150

The amount of oil liters depends on the volume of the engine.

• The volume of oil in the engine Toyota Corolla 1.33 is 3.4 liters, taking into account the filter and 3.6 liters without it.
• The volume of oil in the engine Toyota Corolla 1.4 l is 4.4 liters with a filter and 4.2 liters without.
• Oil volume in the engine Toyota Corolla 1.6 is 4.5 liters with a filter and 4.2 liters without it.

How to determine how much butter in the engine Toyota Corolla is told below.

How to check the oil in the engine Toyota Corolla?

The oil level should be checked on a cold engine, and it is better to do it after the night parking. If there is no such possibility, it is necessary to wait at least 15 minutes. After stopping the engine. The procedure is carried out on a flat platform, the oil level can be viewed through luggage compartment.

• In the trunk, remove the carpet with a spawn.
• From the back of the wheel to unscrew the holder.
• Control probe, located behind the engine on the right, must be taken from the tube and rub. Then the dipstick must be put in place once again and re-removed.
• The fluid level is checked according to the resulting oil film - its boundary should be between L and F marks on the dipstick (L is the minimum level, F - maximum).

If the oil level does not reach the marks, it is necessary to make an oil tank. Also, the tank is made when the film takes only to the mark L - to achieve the top level you need to pour 1 liter of oil.

Outlet outlet beyond any of the two marks is equally dangerous and threatens serious problems with the engine. The insufficient fluid level will lead to the motor breakage, and the excess of oil will cause the grinding of the candles, damage to the gland or lead to the formation of oil leaks.

Motor oil topping:

• Remove the plug from the oil-tapping neck (it is on the cover of the cylinder block). It is important to clean the plug and the neck from contaminants to avoid their engines.
• The oil is poured through the funnel (if there is no one at hand, you can make a funnel from a plastic bottle neck).
• The oil level can be checked by the same control probe.
• Upon completion of the Taller, you should shrink the plug manually and turn on the motor to check the system. Near the oil filter and cork should not form oils.
• Next, turn off the car, wait 15 minutes so that the liquid from the top of the power unit is completely glass into the pallet, and check the oil level of the dipstick.

Checking the level of engine oil should be carried out during maintenance. Big flow Engine oils can be a signal of faults, such as the damage to the gland, piston rings, Valves and relaxing compounds.

Oil consumption Engine Toyota Corolla

Normal is the oil consumption in the amount of 1 l per 1000 km. If he is greater - and Toyota Corolla has a similar situation, it is often encountered, a system should be checked for leakage, search for damaged engine parts or try changing the oil.

More details about the flow rate of oil on the Corolla is described below.

Eshar oil in the engine Toyota Corolla 2008

The phenomenon of oil fume (eats oil) in the engine Toyota Corolla is observed not the first year, and it is characteristic of the new engines operated about 2 - 3 years. In view of this, oil consumption of 200-300 ml per 1 thousand km of mileage is considered already the norm. Eshar oil in the engine may be evidence of various problems, in particular, mechanical.

The cause of the ugar can also be the use of extreme liquid oil recommended by the manufacturer (class 0W-20). Therefore, the replacement of the fluid on a more viscous can solve the problem.

How often should the oil in the engine Toyota Corolla?

Oils of European manufacturers, as a rule, change in 5-7 thousand km, despite the fact that for most brands, the replacement period is 10 thousand km.

The question of which oil to fill in the engine Toyota Corolla, arises from car owners, as a rule, if it is necessary to replace the oil. Recommendations for choosing technical fluids Dana B. service book, Before buying an oil, it is necessary to get acquainted with them to know the permissible characteristics and oil properties. The choice is carried out taking into account the determination of the optimal viscosity on SAE, the API class and seasonality.

modtop.ru.

Toyota Corolla Engine oil

History model Row Corolla takes his beginning since 1966, when a compact novelty from Toyota first descended from the conveyor. After 8 years, she became the record holder of Guinness Book as the most sold car on the planet. Today, Corolla is presented already in the 11th generation and the concern is not going to stop. Corolla has wide gamma Engines with the most different technical data: from barely operating to amazing 240-strong copies of the 4a-GE TRD line with a 1.6 liter volume. This article will be available with information about which oil is pouring into them and how much.

To truly conquer the domestic market at the beginning of the beginning in the 90s with the release of the seventh generation (1991). Then only carburetor 1.3-liter modifications of previous generation were imported to Russia. Corolla E110 made his debut in 1995 and externally, she completely repeated E100. Motors did not change the volume - these are the same engines in the range of 1.3-2.2 liters, issuing 70-165 hp. Since 2000, the ninth generation has already been based on the Toyota Vista platform and differed from the predecessor by the modified front of the car. According to the engines, the peak is now held a 192-strong unit for 1.8 liters.

Corolla E140 is the next generation of a superpopular golf class car, which has become on the conveyor in 2006. Russian drivers were able to choose between 1.4- and 1.6 liters petrol engines at 97 and 124 hp, with the more powerful equipment went pair with robotic transmission. Restyling of the 10th generation replenished the line of installations of 1.3-liter version with 101 hp (Also on the market there were diesel modifications by 1.4, 2.0 and 2.2 liters). And since 2012, Toyota releases Corolla in Generation E170, 11th from the onset of the model. An elegant car has become even more practical and more reliable, while retaining the legendary efficiency and variety of complete sets.

Generation E100 (1991 - 1998)

Toyota 5a-F / Fe / FE 1.5 l engine. 105 hp

• , 15W-40, 20W-50

Engine Toyota 4A-C / L / LC / ELU / F / FE / FE / GE / GZE 1.6 l. 100, 105, 115 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Engine Toyota 7A-Fe 1.8 l. 105, 115, 118 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30, 15W-40, 20W-50
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Generation E110 (1995 - 2002)

Toyota 5a-F / Fe / FE 1.5 l engine. 100 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30, 15W-40, 20W-50
• How many liters of oil in the engine (total volume): 3.0 l.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Engine Toyota 4A-C / L / LC / ELU / F / FE / FE / GE / GZE 1.6 l. 110, 115 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30, 15W-40, 20W-50
• How many oil liters in the engine (total): 3.0 (4a-Fe, 4a-ge), 3.2 (4a-L / LC / F), 3.3 (4a-Fe), 3.7 (4A-GE / GEL)
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Engine Toyota 7A-Fe 1.8 l. 110 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30, 15W-40, 20W-50
• How many litters of oil in the engine (total volume): 3.7 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Engine Toyota 1ZZ-Fe / FED / FBE 1.8 l. 120, 125 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30
• How many litters of oil in the engine (total volume): 3.7 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Generation E120 (2000 - 2006)

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30
• How many litters of oil in the engine (total volume): 3.7 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Toyota 1NZ-Fe / FXE 1.5 l engine. 105, 110 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30
• How many litters of oil in the engine (total volume): 3.7 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Engine Toyota 3zz-Fe 1.6 l. 110 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30
• How many litters of oil in the engine (total volume): 3.7 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Engine Toyota 1ZZ-Fe / FED / FBE 1.8 l. 125, 130, 132, 136 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30
• How many litters of oil in the engine (total volume): 3.7 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Generation E140 (2006 - 2013)

Toyota 2NZ-Fe 1.3 l. 85 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30
• How many litters of oil in the engine (total volume): 3.7 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Toyota 4zz-Fe 1.4 liter engine. 97 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30
• How many litters of oil in the engine (total volume): 3.7 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Toyota 1NZ-Fe / FXE 1.5 l engine. 110 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30
• How many litters of oil in the engine (total volume): 3.7 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Toyota 1ZR-Fe / FAE 1.6 l engine. 124 hp

• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Toyota 2ZR-Fe / FAE / FXE 1.8 l engine. 136 hp

• What engine oil is filled from the plant (original): Synthetic 5W20
• Oil types (viscosity): 0W-20, 5W-20, 5W-30, 10W-30
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Engine Toyota 1ZZ-Fe / FED / FBE 1.8 l. 140 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 5W-30, 10W-30
• How many litters of oil in the engine (total volume): 3.7 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Engine Toyota 3ZR-FE / FAE / FBE 2.0 l. 145 hp

• What engine oil is filled from the plant (original): Synthetic 5W20
• Oil types (viscosity): 0W-20, 5W-20, 5W-30, 10W-30
• How many liters of oil in the engine (total volume): 4.2 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Generation E170 (2012 - N.V.)

Toyota 1ZR-Fe / FAE 1.6 l engine. 122 hp

• What engine oil is poured from the plant (original): Synthetic 5W30
• Oil types (viscosity): 0W-20, 5W-20, 5W-30, 10W-30
• How many litters of oil in the engine (total volume): 4.7 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Toyota 2ZR-Fe / FAE / FXE 1.8 l engine. 132, 140 hp

• What engine oil is filled from the plant (original): Synthetic 5W20
• Oil types (viscosity): 0W-20, 5W-20, 5W-30, 10W-30
• How many liters of oil in the engine (total volume): 4.2 liters.
• Oil consumption per 1000 km.: Up to 1000 ml.
• When changing the oil: 5000-10000

Spare parts that are mentioned in the article, as well as any other spare parts for Toyota Corolla, you can order and buy at low prices in the "Okay-Auto" store Buy the right details for your Corolla in our store, you will get them at a low price, in the shortest possible time and delivery.

One of the most frequent and discussed issues. What oil pour into the engine and the box of your car. Someone bought a car from the hands, and forgot to ask the previous owner which oil was flooded, or the oil brand is known, but there is doubts whether it is chosen correctly. Another option, the desire to choose oil with the necessary characteristics, but at a more pricing price.

In the article we will try to answer which oil to use to replace in the engine and gearbox toyota car Corolla. The two most popular Corolla X modifications (E150) will be discussed from 2006 to 2013, and Corolla IX (E120 / 130) release from 2000 to 2007.

How often do you need to change the oil in Toyota Corolla?

Motor oil must be replaced in each. Recommended interval of periodic car maintenance Toyota
every 10,000 km of run or 1 time in 12 months, depending on what will come earlier.

How much can oil in the engine?

According to the passport in the motors of 1.4 and 1.6 with a filter replacement, 4.2 liters of oil are included. This is the volume that is poured at the factory in an empty engine. With a planned, it should be enough of 4 liters, as oil is not completely merged. Nevertheless, buy better canister 5 liters
or 4 + 1 liter, it will take advantage.

Oil into the engine Corolla X (E150)

Motor oil that can be used in the most common engines: 1.6 l with a capacity of 124 l / s marking - 1ZR-FE.
The 1.4 l 4ZZ-FE engine remained unchanged from the previous generation, and will be considered when selecting the Corolla IX oil selection.
Toyota recommends using original lubricating toyota materials Genuine Motor Oil (who would doubt) or similar. The viscosity of the oil used is selected depending on the operating conditions.
Preference is given to Toyota 0W-20 oil, can also be used. oil SAE.: 0W-30, 5W-20, 5W-30.

Original Toyota Motor Oils

It can be seen from the table that it is advisable to use one of two oils:

1. Toyota SN 0W-20, because the manufacturer gives him preference

2. Toyota SN 5W-30, the most affordable price, and meets all the requirements.

Both oils are sold in metal canes, which is an additional protection against fakes. A low alkaline number can be attributed to the lack of oil, this suggests that the oil is weakly resisting oxidation and quickly loses its properties. This process is accelerated when using low-quality fuel. Oil produces its resource to 5-6 thousand mileage kilometers.

In addition to original oils, no one forbids the use of oils of other manufacturers that meet the requirements of Toyota.

The choice of oil is large and everyone will be able to choose this that will arrange at the price, quality and availability.

Oil into the engine Corolla IX (E120)

Box oil Toyota Corolla

The oil in the checkpoint changes not as often as in the engine. The recommended replacement interval in the manual transmission and a robot of 60,000 km., 100,000 km in the machine.

Oil for robot and manual transmission:

Required for replacement - 2.4 liters

Original Toyota GetRiebeoil LV 75W MT Oil

Toyota mechanical transmission oil for mechanical transmissions

Volume: 1 liter

Delivery: 1 day

Number: 08885-81001

Transmission oil Castrol Syntrans B 75W

Oil for mechanical PPC Ensuring fuel economy and smooth gear shift at low temperature

Volume: 1 liter

Delivery: 1 day

Oil in an automatic box:

The required amount for replacement depends on the method and ranges from 7 to 11 liters

Original oil for automatic transmission Toyota ATF. Type T-IV

Oil provides reliable operation and mild switching of automatic transmission in various operating modes in a wide range of temperatures. Protects the mechanism from wear and corrosion.

Volume: 4 liters

Delivery: 1 day

Number: 08886-81015

High-efficient synthetic oil For automatic transmissions

Volume: 1 liter

In stock

Admission: Toyota T-IV

More \u003e\u003e

Replacing the oil in the engine Toyota Corolla

* The price is per liter and is informational in nature, to compare the cost different oils between themselves. Request price, request by phone, through the feedback form or chat on the site